A superhydrophobic silica aerogel with high surface area for needle trap microextraction of chlorobenzenes

Needle trap device technique: From fabrication to sampling

Needle Trap Device (NTD) as a novel, versatile, and eco-friendly technique has played an important role in analytical and environmental chemistry. The distinctive role of this interdisciplinary technique can be defended through the sampling and analysis of biological samples and industrial pollutants in gaseous and liquid environments. In recent years, significant efforts have been made to enhance the performance of the needle trap device resulting in the development of novel extraction routes by various packing materials with improved selectivity and enhanced adsorption characteristics. These achievements can lead to the facilitated pre-concentration of desired analytes. This review tries to have a comparative and comprehensive survey of the three important areas of NTD technique: I) Fabrication and preparation procedures of NTDs; II) Sampling techniques of pollutants using NTDs; and III) Employed materials as adsorbents in NTDs. In the packing-material section, the commercial and synthetic adsorbents such as carbon materials, metal-organic frameworks, aerogel, and polymers are considered. Furthermore, the limitations and potential areas for future development of the NTD technique are presented.

Smart Titanium Wire Used for the Evaluation of Hydrophobic/Hydrophilic Interaction by In-Tube Solid Phase Microextraction

Evaluation of the hydrophobic/hydrophilic interaction individually between the sorbent and target compounds in sample pretreatment is a big challenge. Herein, a smart titanium substrate with switchable surface wettability was fabricated and selected as the sorbent for the solution. The titanium wires and meshes were fabricated by simple hydrothermal etching and chemical modification so as to construct the superhydrophilic and superhydrophobic surfaces. The micro/nano hierarchical structures of the formed TiO₂ nanoparticles in situ on the surface of Ti substrates exhibited the switchable surface wettability. After UV irradiation for about 15.5 h, the superhydrophobic substrates became superhydrophilic. The morphologies and element composition of the wires were observed by SEM, EDS, and XRD, and their surface wettabilities were measured using the Ti mesh by contact angle goniometer. The pristine hydrophilic wire, the resulting superhydrophilic wire, superhydrophobic wire, and the UV-irradiated superhydrophilic wire were filled into a stainless tube as the sorbent instead of the sample loop of a six-port valve for on-line in-tube solid-phase microextraction. When employed in conjunction with HPLC, four kinds of wires were comparatively applied to extract six estrogens in water samples. The optimal conditions for the preconcentration and separation of target compounds were obtained with a sample volume of 60 mL, an injection rate of 2 mL/min, a desorption time of 2 min, and a mobile phase of acetonile/water (47/53, v/v). The results showed that both the superhydrophilic wire and UV-irradiated wire had the highest extraction efficiency for the polar compounds of estrogens with the enrichment factors in the range of 20-177, while the superhydrophobic wire exhibited the highest extraction efficiency for the non-polar compounds of five polycyclic aromatic hydrocarbons (PAHs). They demonstrated that extraction efficiency was mainly dependent on the surface wettability of the sorbent and the polarity of the target compounds, which was in accordance with the molecular theory of like dissolves like.

Synthesis, structures and properties of hydrophobic Alkyltrimethoxysilane-Polyvinyltrimethoxysilane hybrid aerogels with different alkyl chain lengths

HYPOTHESIS

Alkyltrimethoxysilane (ATMS) is among most widely used silane coupling agents. These commercially available, reasonably priced chemicals are often utilized to improve the compatibility of inorganic surfaces with organic coatings. With three hydrolysable moieties, ATMS is an outstanding candidate for solving the hydrophilicity, moisture sensitivity and high cost of silica aerogels. However, ATMS has a non-hydrolysable alkyl chain that undergoes cyclization reactions. The alkyl chain prevents ATMS from being incorporated in aerogel structures. Polyvinyltrimethoxysilane (PVTMS) is a silica precursor that offers two types of crosslinking to the final aerogel product. This strong doubly-crosslinked network can potentially suppress the cyclization reactions of ATMS and include it in aerogel structure.

EXPERIMENTS

PVTMS was used with ATMS having different alkyl lengths (3-16 carbons) and loadings (25 or 50 wt%) as the silica precursors. Acid and base catalysts were used to perform hydrolysis and condensation reactions on the mixture and ATMS:PVTMS aerogels were obtained via supercritical drying.

FINDINGS

The incorporation of ATMS in the aerogels was approved by different characterization methods. Results showed that ATMS:PVTMS aerogels possess hydrophobicity (θ ∼ 130°), moisture resistance, varying surface area (44-916 m²·g^-1), meso/microporous structure and thermal insulation properties (λ ∼ 0.03 W·m^-1K^-1). These samples also showed excellent performance in oil and organic solvent adsorption.

Poly(ionic liquid)-hybridized silica aerogel for solid-phase microextraction of polycyclic aromatic hydrocarbons prior to gas chromatography-flame ionization detection

Using poly(ionic liquid) (PIL) and tetraethyl orthosilicate (TEOS) as the co-precursors, PIL-hybridized silica aerogel was prepared via sol-gel method for solid-phase microextraction (SPME). The ratio between PIL and TEOS was regulated to achieve the best extraction effect. The aerogel was coated onto the surface of stainless steel wire to get SPME fiber. Coupled to gas chromatography-flame ionization detector (GC-FID), the fiber was separately evaluated by the determination of alkanes, polycyclic aromatic hydrocarbons (PAHs), as well as BTEX (benzene, toluene, ethylbenzene, and xylenes) in immersion mode. The extraction performance of PAHs was attributed to π stacking and hydrophobic effect. After optimization of main extraction and desorption conditions, the SPME-GC-FID method was established towards eight PAHs, and it provided low detection limits (0.005 μg L^-1, 0.010 μg L^-1) and wide linear ranges (0.016-20.00 μg L^-1, 0.033-20.00 μg L^-1) with good linear coefficients (0.9991-0.9998). The method was applied to detect trace PAHs in real water samples, with relative recoveries of 86.2-119.2%. Furthermore, PIL-hybridized silica aerogel exhibits some superiorities like higher sensitivity, shorter extraction time, and better repeatability over other extraction coatings. The present work not only extends the range of aerogel materials but also promoted their further applications in sample preparation. Graphical abstract.

Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review

The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed.

Amine/phenyl gradient derived base layer as a comprehensive extractive phase for headspace cooled in-tube microextraction of volatile organic compounds in saliva

A gradient derived base layer extractive phase was synthesized and applied for the determination of volatile organic compounds (VOCs) in saliva samples using the headspace cooled in-tube microextraction (HS-CITME) method. The base layers from three different sols of phenyltriethoxysilane (PTES), octyltrimethoxysilane (OTMS) and methyltrimethoxysilane (MTMS) as nonpolar precursors were individually dip coated on the stainless steel wires (SSW). Then, the hydrolyzed polar precursor aminopropyltriethoxysilane (APTES) reacted with the silanol groups already formed on the surface of SSWs via controlled rate infusion (CRI) method. The presence of polar and non-polar functional groups on the surface of substrate was evaluated by Fourier-transform infrared spectroscopy (FTIR) while the morphology and thickness of the most suitable gradient coating (amine/phenyl) were also investigated by scanning electron microscopy (SEM). Assessment of the gradient extractive phase efficiency was carried out determining a group of VOCs with different polarities coupled with gas chromatography-mass spectrometry (GCMS) and the improved performance of the synthesized base layer coatings was observed. Furthermore, a cooling device was designed and implemented to the extracting system to improve the efficiency by influencing the exothermic nature of process. The data were analyzed by principal component analysis (PCA), and hierarchical cluster analysis (HCA) and the results were interpreted by polarities of analytes. Finally, under the optimized conditions, the limits of detection (LOD) and limits of quantification (LOQ) were 0.15 and 0.50 ng L^-1, respectively. The intra-day and inter-day relative standard deviations (RSDs) at 5 and 50 ng L^-1 (n = 3) using a single extractive phase were 2-6 and 10-17, respectively. The data associated with RSDs% for three extractive phases were between 16 and 19 %. Eventually, the method was conveniently applied to the extraction of VOCs from saliva samples of smokers and satisfactory relative recoveries (RR%) (95-108 %) were achieved and low quantities of VOCs were detected.

The geometrical characteristics of nickel-based metal organic framework on its entrapment capability

Here, a three dimensional nickel-based metal organic framework (MOF) was synthesized via solvothermal and room temperature protocols. In order to study the effects of the synthesis conditions on the physical properties such as pore sizes and shapes of the prepared MOFs, their extraction capabilities were examined. Both MOFs were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller and thermogravimetric analyses. Brilliant properties such as porous structure, high surface area and considerable thermal stability make them reasonable candidates to be employed as efficient extractive phases. The efficiency of the superior nickel-based MOF was evaluated for headspace needle trap extraction of chlorobenzenes as model compounds in conjunction with gas chromatography-mass spectrometry (GC-MS). The MOF-based extractive phase was conveniently packed in a needle trap device and after extraction, the desorption process was performed via direct insertion of needle into the GC inlet. After optimizing the extraction/desorption conditions, the figures of merit such as linear dynamic range was in the range of 5-1000 ng L^-1 (R² > 0.987) while the limits of detection and quantification values were 2-10 and 6-30 ng L^-1, respectively. The intra- and inter-day relative standard deviations for three replicates at the concentration level of 50 ng L^-1 were in the range of 7-9% and 9-12%, respectively. The needle-to-needle reproducibility was also found to be in the range of 5-11%. Acceptable relative recovery values at the concentration level of 50 ng L^-1 ranged from 85 to 96%, showing no significant matrix effect.

An organic-inorganic hybrid silica aerogel prepared by co-precursor method for solid-phase microextraction coating

In order to improve the extraction performance of silica aerogel, an organic-inorganic hybrid silica aerogel was developed as the coating of solid-phase microextraction (SPME). It was prepared via the co-precursor reaction between tris(triethoxysilylpropyl)amine and tetraethyl orthosilicate. Coupled with gas chromatography, the hybrid silica aerogel-coated SPME fiber was evaluated using polycyclic aromatic hydrocarbons (PAHs). Compared to silica aerogel, the hybrid silica aerogel displayed better extraction performance, peak areas of PAH analytes were increased by about 2 times. The affecting parameters including extraction time, extraction temperature, ionic strength, stirring rate and desorption time were optimized, and an analytical method was established with wide linear ranges (0.005-20 μg L^-1, 0.010-20 μg L^-1, 0.100-20 μg L^-1), good correlation coefficients (0.9967-0.9994), low limits of detection (0.001-0.030 μg L^-1) and limits of quantitation (0.005-0.100 μg L^-1). Satisfactory extraction repeatability (RSD≤6.1%, n = 3) and preparation repeatability (RSD ≤ 9.8%, n = 3) were also obtained. Compared to the reported coatings and the commercial coating, the organic-inorganic hybrid silica aerogel has higher or comparable sensitivity, better repeatability, and shorter extraction time and longer service life. The established method was used for the detection of lake water and rain water, and some targets were quantified successfully.

Evaluation of a cooling/heating-assisted microextraction instrument using a needle trap device packed with aminosilica/graphene oxide nanocomposites, covalently attached to cotton

Evaluation of the first commercial sample of a cooling/heating-assisted microextraction instrument.