In situ hydrothermal growth of a zirconium-based porphyrinic metal-organic framework on stainless steel fibers for solid-phase microextraction of nitrated polycyclic aromatic hydrocarbons

In situ growth of porous organic framework on iron wire for microextraction of polycyclic aromatic hydrocarbons

In this work, a novel spherical metal organic framework (MOF) was first in situ grown on the surface of iron wire (IW), in which IW served as the substrate and metal source for MOF (type NH₂-MIL88) growth without adding additional metal salts in the process, while spherical NH₂-MIL88 provided more active sites for further construction of multifunctional composites. Subsequently, a covalent organic framework (COF) was covalently bonded to the surface of the NH₂-MIL88 to obtain the IW@NH₂-MIL88@COF fibers, which were used for headspace solid-phase microextraction (HS-SPME) of polycyclic aromatic hydrocarbons (PAHs) in milk samples prior to determination by gas chromatography-flame ionization detection (GC-FID). Compared with the fiber prepared by physical coating, the IW@NH₂-MIL88@COF fiber prepared by in situ growth and covalent bonding exhibits better stability and possesses more uniform layer. The extraction mechanism of the IW@NH₂-MIL88@COF fiber for PAHs was discussed, which mainly owed to π-π interactions and hydrophobic interactions. After optimization of the primary extraction conditions, the SPME-GC-FID method was established for five PAHs with a wide linear range (1-200 ng mL^-1), good linearity coefficient (0.9935-0.9987) and low detection limits (0.017-0.028 ng mL^-1). The relative recoveries for PAHs detection in milk samples ranged from 64.69 to 113.97%. This work not only provides new ideas for the in situ growth of other types of MOF, but also provides new methods for the construction of multifunctional composites.

Investigation of five metal organic frameworks as sorbent in syringe filters-SPE method for determination of metronidazole and cephalexin in water samples

In this study, we evaluated the preparation and utilization of NH2-MIL-101(Al) and NH2-MIL-101(Cr) as two efficient adsorbents for extraction of metronidazole and cephalexin in water samples using syringe filters-SPE method....

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Crystal violet-modified HKUST-1 framework with improved hydrostability as an efficient adsorbent for direct solid-phase microextraction

Metal-organic frameworks (MOFs) have received extensive attention in adsorption applications owing to their high surface area. However, some MOFs do not perform well as the extraction medium when used under aqueous conditions. The low hydrostability of MOFs limits the practical application of these materials in solid-phase microextraction (SPME). Here, the fabrication of a water resistance SPME fiber coating is introduced based on the crystal violet (CV)-modified HKUST-1 framework on copper (Cu@HKUST-1@CV). The HKUST-1 was prepared by the in situ growth method, followed by post-synthetic modification of HKUST-1 with the CV layer. The preparation of the modified HKUST-1 was characterized by FESEM, XRD, FTIR, and DFT approaches. The prepared SPME coating was successfully employed for the quantification of anthracene (AN), as a model analyte, in water samples. The limit of detection was 0.8 ng mL^-1. The developed method will open up a new door towards searching for promising materials in SPME applications.

Applications of porous frameworks in solid-phase microextraction

Porous frameworks are a term of attracting solid materials assembled by interconnection of molecules and ions. These trendy materials due to high chemical and thermal stability, well-defined pore size and structure, and high effective surface area gained attention to employ as extraction phase in sample pretreatment methods before analytical analysis. Solid-phase microextraction is an important subclass of sample preparation technique that up to now different configurations of this method have been introduced to get adaptable with different environments and analytical instruments. In this review, theoretical aspect and different modes of solid-phase microextraction method are investigated. Different classes of porous frameworks and their applications as extraction phase in the proposed microextraction method are evaluated. Types and features of supporting substrates and coating procedures of porous frameworks on them are reviewed. At the end, the prospective and the challenges ahead in this field are discussed.

Quantitation of ultra-trace nitrated polycyclic aromatic hydrocarbons isomers in water by online solid-phase extraction coupled-liquid chromatography-mass spectrometry

An online solid-phase extraction (SPE)-coupled liquid chromatography-mass spectrometry (LC-MS) method was established for the determination of 10 nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) in water. Water samples were mixed with methanol to generate 40% methanol solutions (v/v), and filtered by 0.45 μm membrane. The filtration with polytetrafluoroethylene(PTFE) membrane got higher recovery rates than nylon membrane, especially for 4-ring and 5-ring nitro-PAHs. 2.5 mL solution was directly injected into online SPE flow path to allow for online purification and enrichment of target analytes in the SPE column. The nitro-PAHs eluted from the SPE column were automatically transferred to the analytical flow path by a well-designed valve-switching system. With the optimization of LC and MS condition, ten nitro-PAH isomers was separated and detected from each other by LC-MS/MS with negative atmospheric pressure chemical ionization (APCI). It was firstly found that nitro-PAHs could produce strong [M-H]^- precursor ions in the primary MS besides [M+e]^- and [M+15]^-. In the secondary MS, the precursor ions mainly lose NO neutral molecule (30 Daltons) to produce daughter ions. The online SPE and LC-MS analysis process was completed in 15.5 min. The linear correlation coefficients of 10 nitro-PAH standard curves were higher than 0.99. The detection limits of nitro-PAHs were about 1.2~22.2 ng/L (S/N=3). The intra-day and inter-day reproducibility (RSD, n=6) were 1.6%~8.4% and 5.3%~16.9%, respectively. The recoveries of 10, 40 and 200 ng/L in tap water were 71.7%~106.4%, 79.7%~100.9% and 73.0%~105.5%, with the corresponding RSD of 2.4%~10.5%, 2.1%~8.6% and 2.7%~6.2%, respectively.

Zr-MOF modified cotton fiber for pipette tip solid-phase extraction of four phenoxy herbicides in complex samples

Phenoxy herbicides are widely applied in agricultural weeding. The determination of herbicides is important in environmental protection, agricultural production, food safety, and public health. In this study, a facile and efficient analytical method was proposed for the trace detection of phenoxy herbicides in soil, cucumber, and tap water samples by coupling pipette tip solid phase extraction (PT-SPE) with high performance liquid chromatography. UiO-66-funtionalized cotton (Cotton@UiO-66) was packed into pipette-tip as sorbent to fabricate extraction device. The modification of UiO-66 on cotton fiber was confirmed using scanning electron microscope, Fourier transform infrared spectroscopy, and X-ray diffraction. The main factors affecting the adsorption of Cotton@UiO-66 for four phenoxy herbicides were evaluated by response surface methodology in detail. Under optimized conditions, Cotton@UiO-66 displayed excellent properties in the extraction of phenoxy herbicides with good peak shape. Linear ranges of 4-chlorophenoxyacetic acid, dicamba, 2,4-dichlorophenoxyacetic acid, and 2-(2,4-dichlorophenoxy) propionic acid were 1.4-72 μg/L, 5.6-280 μg/L, 2.8-140 μg/L and 3.2-160 μg/L (RSDs < 6.3%), respectively. The recoveries were between 83.3 and 106.8% with RSDs <6.7%, with detection limits ranging from 0.1 μg/L to 0.3 μg/L. The results show that Cotton@UiO-66 in PT-SPE is an effective method for monitoring phenoxy herbicides in complex samples.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.

Metal–Organic Frameworks as Key Materials for Solid-Phase Microextraction Devices—A Review

Metal–organic frameworks (MOFs) have attracted recently considerable attention in analytical sample preparation, particularly when used as novel sorbent materials in solid-phase microextraction (SPME). MOFs are highly ordered porous crystalline structures, full of cavities. They are formed by inorganic centers (metal ion atoms or metal clusters) and organic linkers connected by covalent coordination bonds. Depending on the ratio of such precursors and the synthetic conditions, the characteristics of the resulting MOF vary significantly, thus drifting into a countless number of interesting materials with unique properties. Among astonishing features of MOFs, their high chemical and thermal stability, easy tuneability, simple synthesis, and impressive surface area (which is the highest known), are the most attractive characteristics that makes them outstanding materials in SPME. This review offers an overview on the current state of the use of MOFs in different SPME configurations, in all cases covering extraction devices coated with (or incorporating) MOFs, with particular emphases in their preparation.

Preparation of polypyrrole/nanosilica composite for solid-phase microextraction of bisphenol and phthalates migrated from containers to eye drops and injection solutions

This paper describes the electrodeposition of polyphosphate-doped polypyrrole/nanosilica nanocomposite coating on steel wire for direct solid-phase microextraction of bisphenol A and five phthalates. We optimized influencing parameters on the extraction efficiency and morphology of the nanocomposite such as deposition potential, concentration of pyrrole and polyphosphate, deposition time and the nanosilica amount. Under the optimized conditions, characterization of the nanocomposite was investigated by scanning electron microscopy and Fourier transform infra-red spectroscopy. Also, the factors related to the solid-phase microextraction method including desorption temperature and time, extraction temperature and time, ionic strength and pH were studied in detail. Subsequently, the proposed method was validated by gas chromatography-mass spectrometry by thermal desorption and acceptable figures of merit were obtained. The linearity of the calibration curves was between 0.01 and 50 ng/mL with acceptable correlation coefficients (0.9956-0.9987) and limits of detection were in the range 0.002-0.01 ng/mL. Relative standard deviations in terms of intra-day and inter-day by five replicate analyses from aqueous solutions containing 0.1 ng/mL of target analytes were in the range 3.3%-5.4% and 5%-7.1%, respectively. Fiber-to-fiber reproducibilities were measured for three different fibers prepared in the same conditions and the results were between 7.3% and 9.8%. Also, extraction recoveries at two different concentrations were ≥96%. Finally, the suitability of the proposed method was demonstrated through its application to the analysis of some eye drops and injection solutions.

Solid phase microextraction of polycyclic aromatic hydrocarbons by using an etched stainless-steel fiber coated with a covalent organic framework

A new covalent organic framework (COF) was synthesized by the amide coupling between 1,3,5-tris(4-aminophenyl)benzene and trimesoyl chloride at room temperature. The COF was applied as a steel fiber coating for the solid phase microextraction of polycyclic aromatic hydrocarbons (PAHs) from water samples. The effect of extraction time, salt concentration, and extraction temperature on the efficiency of SPME was optimized by a Box-Behnken design. The PAHs were quantified by gas chromatography with mass spectrometric detection. Figures of merit include (a) a wide linear range (typically from 0.2 ng L^-1 to 2 μg L^-1), (b) low limits of detection (0.29 to 0.94 ng L^-1 at S/N = 3), and (c) high enrichment factors (EFs; 819-2420). Density functional theory was employed to study the interaction between the COF cluster and the PAHs. The results demonstrated that the EFs increase with the enhancement of π stacking interaction. The repeatability (one fiber; n = 5) and reproducibility (fiber to fiber; n = 5), expressed as the relative standard deviations were in the range of 4.3%-8.4% and 8.5-11.0%, respectively. The recoveries of the PAHs from water samples spiked at levels of 20.0 and 100 ng L^-1 ranged from 79.0% to 105.0%. Graphical abstract A covalent organic framework prepared from 1,3,5-tris(4-aminophenyl)benzene and trimesoyl chloride (TAPB-TMC-COF) was synthesized and employed as solid phase microextraction (SPME) fiber coating for the extraction of polycyclic aromatic hydrocarbons from water samples prior to gas chromatography (GC) - mass spectrometric (MS) detection.

Magnetic halloysite nanotube/polyaniline/copper composite coupled with gas chromatography-mass spectrometry: A rapid approach for determination of nitro-phenanthrenes in water and soil samples

A fast, sensitive and reliable ultrasound-assisted magnetic dispersive solid-phase microextraction (UAMDSPME) setup was developed and evaluated for the enrichment of nitro- phenanthrenes compound in environmental samples prior to GC-MS determination. A new type of nanocomposite sorbent was made based on halloysite nanotubes (HNTs). HNTs is a type of natural material, have attracted great interest because of their large surface area and high chemical and thermal stability. The hybrid nanocomposite (magnetic HNT@PANI@Cu) was obtained by coating the magnetic HNTs by polyaniline (PANI) and afterwards decorating with metalic copper. Its morphology and surface properties were characterized using Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy dispersive spectroscopy and vibrating sample magnetometry. In this work several factors that may affect the extraction efficiencies such as desorption solvent type and its volume, sonication times for extraction and desorption, sorbent amount, organic modifier content, salt concentration and matrix effect were investigated in detail. Under the optimal conditions, the limit of detection (S/N = 3) was 0.25 ng L^-1 and the linearity was in the range of 0.01-100 μg L^-1. The method precision expressed as relative standard deviations (RSDs%) were 4.6-6.1% (intra-day), and 7.2-9.6% (inter-day). Finally, the presented method was successfully applied to the rapid determination of trace levels of nitro-phenanthrenes in spiked water and soil samples.

Microextraction of polycyclic aromatic hydrocarbons by using a stainless steel fiber coated with nanoparticles made from a porous aromatic framework

A porous aromatic framework of type PAF-6 was synthesized and explored as a coating onto a steel wire for using in solid-phase microextraction of polycyclic aromatic hydrocarbons (PAHs), phthalate plasticizers, and n-alkanes. The extraction temperature, extraction time, salt concentration, agitation speed, desorption temperature, and desorption time were optimized. This method for SPME resulted in the enrichment factors ranging from 122 to 1090 for PAHs (naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene), from 122 to 271 for plasticizers (diisobutyl phthalate, dibutyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate), and from 9 to 113 for n-alkanes (n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentadecane, n-hexadecane, n-octadecane and n-eicosane). The good extraction of the PAHs is assumed to be due to their π-stacking interaction and hydrophobic effect. The PAF-6 coated fibers are durable and can be reused more than 100 times without significant loss of extraction performance. In combination with GC-MS detection, the method has limits of detection in the range from 0.8 to 4.2 ng L^-1 in case of PAHs. The relative standard deviations for five replicate determinations of the PAHs by using one fiber are in the range from 5.2 to 8.5%. When using different fibers, they range from 7.1 to 9.6%. The recoveries of PAHs from water samples at a spiking level of 20 ng L^-1 are in the range from 89.5 to 103.1%, with relative standard deviations ranging from 4.0 to 9.3%. Graphical abstract A porous aromatic framework of type PAF-6 was synthesized and used as a novel coating for the solid-phase microextraction of polycyclic aromatic hydrocarbons prior to their determination by gas chromatography with mass spectrometric detection.