An aptamer-based colorimetric lead(II) assay based on the use of gold nanoparticles modified with dsDNA and exonuclease I

Perylene Diimide-based Fluorescent Aptasensor for Quantitative Analysis of Pb2+ Based on Terminal Deoxynucleotidyl Transferase-assisted Formation of Elongated Aptamer and Gold Nanoparticles

Due to the exceedingly poisonous properties of Pb2+, it is imperative to conduct a thorough assessment of its quantity in both biological and environmental samples, as this is crucial for safeguarding public health. This study describes an economic turn-off fluorescent aptasensor for the quantitative analysis of Pb2+ employing 3,4,9,10-perylenetetracarboxylic acid diimide (PTCDI) as a cost-effective fluorophore, gold nanoparticles (AuNPs) as separating agent and an elongated aptamer as both targeting agent and PTCDI loading site. The fundamental principle of the suggested fluorescent aptasensor, which is based on PTCDI, relies on detecting variations in the fluorescence intensity of PTCDI when an elongated aptamer (as single-stranded DNA) is present or absent. The advanced aptasensor is advantageous due to the elongation of the lead aptamer sequence length induced by terminal deoxynucleotidyl transferase (TdT), resulting in enhanced sensitivity. The presence of Pb2+ and the centrifugation process causes the separation of the poly A-modified aptamer/Pb2+ conjugate from the poly T sequence. Hence, the interaction of PTCDI with the poly A moiety in the modified aptamer leads to a decrease in its fluorescence emission. The findings showcased that the fluorescent aptasensor exhibited exceptional specificity towards Pb2+ ions, while the biosensing platform accomplished an impressive detection limit of 3.7 pM. Moreover, the suggested aptasensor utilizing PTCDI exhibits a commendable capability in quantitatively analyzing Pb2+ within human serum samples and mineral water.

Label-free competitive time-resolved fluorescent aptasensor for the detection of Pb2+ using ssDNA-sensitized fluorescence of Tb3+ ions

Lead (Pb2+) is one of the most toxic heavy metals, and its environmental pollution and serious damages is a global concern. Therefore, it is necessary to develop effective sensing methods. This study describes a new strategy for the design of label-free competitive time-resolved fluorescent (TRF) aptasensor for detecting Pb2+ ions. The sensing principle of this aptasensor is the competition between Pb2+ and Tb3+ ions to bind to the guanine/thymine-rich sequence (lead aptamer) and the sensitized luminescence of Tb3+ by this sequence. The developed TRF aptasensor demonstrated a good linear detection range from 2.5 nM to 150 nM and a limit of detection (LOD) of 645 pM. In addition, the proposed TRF aptasensor has a high selectivity towards Pb2+, and it has also been successfully utilized to detect this ion in milk and human serum samples. This TRF aptasensor offers advantages such as short analysis time, simple operation, low cost, being label-free, and surpassing the interference of background fluorescence of biological samples due to its TRF characteristic. In this paper, we propose a Tb3+/guanine/thymine-rich sequence system for designing different aptasensors against diverse targets by applying a proper guanine-rich sequence.

Advances in colorimetric aptasensors for heavy metal ion detection utilizing nanomaterials: a comprehensive review

Heavy metal ion contamination poses significant environmental and health risks, necessitating rapid and efficient detection methods. In the last decade, colorimetric aptasensors have emerged as powerful tools for heavy metal ion detection, owing to their notable attributes such as high specificity, facile synthesis, adaptability to modifications, long-term stability, and heightened sensitivity. This comprehensive overview summarizes the key developments in this field over the past ten years. It discusses the principles, design strategies, and innovative techniques employed in colorimetric aptasensors using nanomaterials. Recent advancements in enhancing sensitivity, selectivity, and on-site applicability are highlighted. The review also presents application studies of successful heavy metal ion detection using colorimetric aptasensors, underlining their potential for environmental monitoring and health protection. Finally, future directions and challenges in the continued evolution of these aptasensors are outlined.

Label-free colorimetric sensor for Pb2+ determination using catalytic activity of MnO2 nanoflowers and elongated aptamer

In this study, a label-free aptasensor utilizing colorimetric properties was developed to detect Pb2+ with high sensitivity. The approach involved applying modified aptamer which enhanced the oxidase-mimicking activity of MnO2 nanoflowers. This innovative method provides an efficient means for monitoring Pb2+ ions without requiring any labeling techniques. The fundamental principle of this aptasensor is based on the adsorption of a modified aptamer onto MnO2 nanoflowers' surface, which in turn increases their affinity for chromogenic substrates and enhances their catalytic activity. The proposed aptasensor exploits the high sensitivity due to the extension of the aptamer sequence length by terminal deoxynucleotidyl transferase (TdT). Under optimum experimental conditions, the developed colorimetric aptasensor indicated a linear detection range from 4 to 80 nM with a limit of detection (LOD) of 1.4 nM. Moreover, the aptasensor successfully monitored Pb2+ in the drinking water, milk and human serum samples. Henceforth, the colorimetric aptasensor exhibited in this study possesses several benefits such as uncomplicated operation, cost-effectiveness, label-free detection and remarkable sensitivity. Thus rendering it a suitable option for analyzing intricate samples.

Chromogenic Mechanisms of Colorimetric Sensors Based on Gold Nanoparticles

The colorimetric signal readout method is widely used in visualized analyses for its advantages, including visualization of test results, simple and fast operations, low detection cost and fast response time. Gold nanoparticles (Au NPs), which not only exhibit enzyme-like activity but also have the advantages of tunable localized surface plasmon resonance (LSPR), high stability, good biocompatibility and easily modified properties, provide excellent platforms for the construction of colorimetric sensors. They are widely used in environmental monitoring, biomedicine, the food industry and other fields. This review focuses on the chromogenic mechanisms of colorimetric sensors based on Au NPs adopting two different sensing strategies and summarizes significant advances in Au NP-based colorimetric sensing with enzyme-like activity and tunable LSPR characteristics. In addition, the sensing strategies based on the LSPR properties of Au NPs are classified into four modulation methods: aggregation, surface modification, deposition and etching, and the current status of visual detection of various analytes is discussed. Finally, the review further discusses the limitations of current Au NP-based detection strategies and the promising prospects of Au NPs as colorimetric sensors, guiding the design of novel colorimetric sensors.

A label-free fluorescent biosensor based on a catalyzed hairpin assembly for HIV DNA and lead detection

Herein, a label-free fluorescent signal amplification system based on a catalyzed hairpin assembly (CHA) is reported. In this system, two hairpin probes, H1 and H2, were well-designed in which G-quadruplex sequences were integrated into H2. The CHA reaction was triggered by target/trigger DNA and G-quadruplex sequences were released, which can bind the fluorescent amyloid dye thioflavin T (ThT) to provide fluorescence signals. At the same time, target/trigger DNA was released from the product of the CHA reaction (H1-H2), which continued to initiate the next CHA cycle, and the signal was eventually amplified. This signal amplification approach has been successfully used to develop a label-free fluorescent sensing platform for sensitive detection of human immunodeficiency virus (HIV) DNA and Pb²⁺.

DNAzyme-based sensing probe protected by DNA tetrahedron from nuclease degradation for the detection of lead ions

Lead poisoning endangers soil, plants and human health due to its toxic effect. It is urgent to develop ideal tool for the in vivo detection of Pb²⁺.In this study, tetrahedron-based Pb²⁺-sensitive DNAzyme sensor (TPS) is constructed by taking advantages of a classic Pb²⁺-dependent GR-5 DNAzyme and DNA tetrahedral structure, where the cleavage substrate and DNAzyme are modified with fluorophore FAM and quencher BHQ-1, respectively. DNA tetrahedron is arranged at the terminus of substrate/DNAzyme duplex to offer the protective shield against the nuclease attack. In the absence of Pb²⁺, FAM and BHQ-1 are kept close and FAM fluorescence is efficiently quenched. However, in the presence of Pb²⁺ cofactor, the DNAzyme exhibits the catalytic activity and cleaves the substrate strands, spatially separating the FAM away from BHQ-1 and releasing fluorescence. Utilizing the sensing probe, the Pb²⁺ can be quantitatively detected down to 1 nM without the interference from nontarget metal ions. Even if incubating in the human serum solution for 12 h, no substantial nuclease degradation is detected. In different complex biological milieu, the TPS can preserve the 85% of fluorescence signal, indicating that the developed TPS is a promising tool for the future application in the in vivo detection of Pb²⁺.

An Ultrasensitive Label-Free Fluorescent Aptasensor Platform for Detection of Sulfamethazine

Purpose

Sulfamethazine (SMZ) exposed in the environment can enter the human body through the food chain and pose a serious threat to human health. Therefore, it is important to develop a rapid and sensitive method for detecting SMZ in environmental samples. In order to fastly and quantitatively detect SMZ in environmental samples, we developed a label-free fluorescent aptasensor based on specific aptamer (SMZ1S) and fluorescence resonance energy transfer (FRET) between gold nanoparticles (AuNPs) and rhodamine B (RhoB).

Methods

In the absence of SMZ, SMZ1S was adsorbed on the surface of AuNPs, which led to dispersion of the AuNPs in high concentration saline solution, thus effectively quenching the fluorescence of RhoB. With the increase of the SMZ concentration, the specific binding of SMZ1S and SMZ led to the aggregation of AuNPs in the presence of NaCl, which reduced the quenching of RhoB fluorescence and increased the fluorescence intensity. The sensitivity and linearity curve of the label-free fluorescent aptasensor were determined with different concentrations of sulfamethazine standard solutions. The specificity of this fluorescent aptasensor was determined by replacing sulfamethazine with different antibiotics. In addition, the actual water and soil samples were spiked and recovered.

Results

Under optimized conditions, the proposed fluorescent aptasensor demonstrated a good linear detection of SMZ in binding buffer from 1.25 ng mL^-1 to 40 ng mL^-1 and the limit of detection was 0.82 ng mL^-1. The spiked recoveries for SMZ were 94.4% to 108.8% with a relative standard deviation of 1.8-10.3% in water and soil samples, respectively.

Conclusion

The label-free fluorescent aptasensor investigated in the current study is a promising tool to detect and quantify SMZ in water and soil samples.

Limitations for colorimetric aggregation assay of metal ions and ways of their overcoming

The development of analytical methods for the determination of metal ions in water is one of the priority tasks for efficient environmental monitoring. The use of modified gold nanoparticles and the colorimetric detection of their aggregation initiated by ions binding with specific receptors on the nanoparticle surface has high potential for simple testing. However, the limits of this approach and the parameters determining the assay sensitivity are not clear, and the possibilities of different assay formats are estimated only empirically. We have proposed a mathematical description of the aggregation processes in the assay and have estimated the detection limits of an aptamer-based assay of Pb2+ ions theoretically and experimentally. In the studied assay, gold nanoparticles modified with G,T-enriched aptamer were used, and their aggregation caused by the interaction with Pb2+ ions was controlled via a color change. The experimentally determined limit of Pb2+ detection was 700 ppb, which was in good agreement with theoretical calculations. An examination of the model showed that the limiting parameter of the assay is the binding constant of the aptamer-Pb2+ ion interaction. To overcome this limitation without searching for alternate receptors, two methods have been proposed, namely additional aggregation-causing components or centrifugation. These approaches lowered the detection limit to 150 ppb and even to 0.4 ppb. The second value accords with regulatory demands for the permissible levels of water source contamination, and the corresponding approach has significant competitive potential due to its rapidity, simple implementation, and the visual assessment of the assay results.

Label-free exonuclease I-assisted signal amplification colorimetric sensor for highly sensitive detection of kanamycin

A label-free colorimetric method based on exonuclease I (Exo I)-assisted signal amplification with protamine as a medium was developed for analysis of kanamycin. In this study, a double-stranded DNA (dsDNA) probe was tailored by manipulating an aptamer and its complementary DNA (cDNA) ensuring detection of target with high selectivity and excellent sensitivity. Herein, protamine could not only combine with negatively charged gold nanoparticles but also interaction with polyanion DNA. Upon addition of target kanamycin, the target-aptamer complex was formed and the cDNA was released. Thus, both aptamer and cDNA could be digested by Exo I, and the captured kanamycin was liberated for triggering target recycling and signal amplification. Under optimized conditions, the proposed colorimetric method realized a low detection limit of 2.8 × 10^-14 M along with a wide linear range plus excellent selectivity. Our strategy exhibited enormous potentials for fabricate various kinds of biosensors based on target-induced aptamer configuration changes.

Application of DNA-Nanosensor for Environmental Monitoring: Recent Advances and Perspectives

PURPOSE OF REVIEW

Environmental pollutants are threat to human beings. Pollutants can lead to human health and environment hazards. The purpose of this review is to summarize the work done on detection of environmental pollutants using DNA nanosensors and challenges in the areas that can be focused for safe environment.

RECENT FINDINGS

Most of the DNA-based nanosensors designed so far use DNA as recognition element. ssDNA, dsDNA, complementary mismatched DNA, aptamers, and G-quadruplex DNA are commonly used as probes in nanosensors. More and more DNA sequences are being designed that can specifically detect various pollutants even simultaneously in complex milk, wastewater, soil, blood, tap water, river, and pond water samples. The feasibility of direct detection, ease of designing, and analysis makes DNA nanosensors fit for future point-of-care applications.

SUMMARY

DNA nanosensors are easy to design and have good sensitivity. DNA component and nanomaterials can be designed in a controlled manner to detect various environmental pollutants. This review identifies the recent advances in DNA nanosensor designing and opportunities available to design nanosensors for unexplored pathogens, antibiotics, pesticides, GMO, heavy metals, and other toxic pollutant.

Impact of Protein Corona on Noncovalent Molecule-Gold Nanoparticle-Based Sensing

Gold nanoparticle (AuNP)-based sensors have been extensively applied for sensing or imaging. It is known that a protein shell named protein corona (PC) formed around the nanomaterials could not only block the desired function of nanomaterials but also affect their behavior, which is a hot and important issue needing consideration. Therefore, we hypothesize that the formation of PC around AuNPs could inevitably affect the AuNP-based target assay. In this work, the effects of PC on the detection results in sensors based on AuNPs were studied. Three types of noncovalent molecule-AuNP sensors including AuNP-dichlorofluorescein, AuNP-aptamer, and AuNP-antibody-DNA were constructed, and several typical proteins (bovine serum albumin, fibrinogen, hemoglobin, and β-lactoglobulin), milk, and fetal bovine serum were selected as models for the formation of PCs. This study shows that the PC could cause the loss of detection signals (up to 80%) and result in positive deviation of the measuring value compared with the true value. Moreover, the loss of detection signals could also increase the limits of detection (almost 10 times), decreasing the sensitivity of the three types of sensors, as proposed in this work compared to that without PC. Moreover, the polyethylene glycol backfilling strategy could not resolve the negative effects of PC on noncovalent molecule-AuNP sensors. The impacts of PC on detection results from noncovalent molecule-AuNP sensors would cause misdiagnosis or wasted production, which needs careful reconsideration of the AuNP-based detection in application fields like clinic diagnosis, food safety control, and so forth.

Fluorometric determination of lead(II) by using aptamer-functionalized upconversion nanoparticles and magnetite-modified gold nanoparticles

A fluorescent nanoprobe for Pb(II) has been developed by employing aptamer-functionalized upconversion nanoparticles (UCNPs) and magnetic Fe₃O₄-modified (MNPs) gold nanoparticles (GNPs). First, aptamer-functionalized UCNPs and aptamer-functionalized magnetic GNPs were synthesized to obtained the fluorescent nanoprobe. The particles were combined by adding a complementary ssDNA. In the absence of Pb(II), the UCNPs, MNPs and GNPs are linked via complementary base pairing. This led to a decrease in the green upconversion fluorescence peaking at 547 nm (under 980 nm excitation). In the presence of Pb(II), the dsDNA between UCNPs and MNPs-GNPs is cleaved, and fluorescence recovers. This effect allows Pb(II) to be quantified, with a wide working range of 25-1400 nM and a lower detection limit of 5.7 nM. The nanoprobe gave satisfactory results when analyzing Pb(II) in tea and waste water. Graphical abstractSchematic representation of fluorescent nanoprobe based on fluorescence resonance energy transfer (FRET) between upconversion nanoparticles (UCNPs) and gold nanoparticles (GNPs)-Fe₃O₄ magnetic nanoparticles (MNPs) for detection of Pb²⁺.

Electrochemical lead(II) biosensor by using an ion-dependent split DNAzyme and a template-free DNA extension reaction for signal amplification

A voltammetric biosensor for lead(II) (Pb²⁺) is described that is based on signal amplification by using an ion-dependent split DNAzyme and template-free DNA extension reaction. The Pb²⁺-dependent split DNAzyme was assembled on gold nanoparticles (Au@Fe₃O₄), and this nanoprobe then was exposed to Pb²⁺ which causes the split-off of DNAzymes to release primers containing 3'-OH groups (S₁ and S₂). The template-free DNA extension reaction triggers the generation of long ssDNA nanotails, which then can bind the free redox probe N,N'-bis(2-(trimethylammonium iodide)propylene)perylene-3,4,9,10-tetracarboxyldiimide (PDA⁺) via electrostatic adsorption. Hence, the concentration of PDA⁺ in solution is reduced. Therefore, less free PDA⁺ can be immobilized on a glassy carbon electrode modified with electrodeposited gold nanoparticles (depAu) to produce an electrochemical signal, typically measured at ∼0.38 V (vs. SCE) for quantitation of Pb²⁺. The use of a Pb²⁺-dependent split DNAzyme avoids the usage of a proteinic enzyme. It also increases the sensitivity of the sensor which has a lower detection limit of 30 pM of Pb²⁺. Graphical abstract Novel electrochemical biosensor based on the amplification of ion-dependent split DNAzyme and template-free DNA extension reaction for trace detection of Pb²⁺.

Gold Nanoparticle-Based Colorimetric Strategies for Chemical and Biological Sensing Applications

Gold nanoparticles are popularly used in biological and chemical sensors and their applications owing to their fascinating chemical, optical, and catalytic properties. Particularly, the use of gold nanoparticles is widespread in colorimetric assays because of their simple, cost-effective fabrication, and ease of use. More importantly, the gold nanoparticle sensor response is a visual change in color, which allows easy interpretation of results. Therefore, many studies of gold nanoparticle-based colorimetric methods have been reported, and some review articles published over the past years. Most reviews focus exclusively on a single gold nanoparticle-based colorimetric technique for one analyte of interest. In this review, we focus on the current developments in different colorimetric assay designs for the sensing of various chemical and biological samples. We summarize and classify the sensing strategies and mechanism analyses of gold nanoparticle-based detection. Additionally, typical examples of recently developed gold nanoparticle-based colorimetric methods and their applications in the detection of various analytes are presented and discussed comprehensively.

Functionalized magnetic composites based on the aptamer serve as novel bio-adsorbent for the separation and preconcentration of trace lead

A magnetic functionalized bio-sorbent based on aptamer was designed for the selective separation of ultra-trace Pb²⁺, shortly termed as Fe₃O₄@Au@DNA. Pb(II) specific aptamer attached to the magnetic solid substrate served as affinity probe to capture and separate trace lead. Oligonucleotides with a polyA block were employed for the immobilization on the surface of AuNPs, with adenine sequences (polyA) as the part of effective anchoring block. The prepared Fe₃O₄@Au@DNA composites were characterized by FT-IR, SEM and XPS. The binding of lead on Fe₃O₄@Au@DNA composites surface was pH-dependent, the adsorption follows Langmuir model, and the adsorption dynamic fits the pseudo-second-order kinetics model. Procedure for lead separation and preconcentration was explored and combined with detection of graphite furnace atomic absorption spectrometry (GFAAS). Under the optimum condition, an enrichment factor of 17.73 was obtained with a sample volume of 1.0 mL. The limit of detection (LOD) was 57 ng L^-1 along with a relative standard deviation (RSD) of 2.06 (n = 9). The procedure was further validated by a certified reference material GBW08608 and several environmental and blood samples.

Progress in rapid optical assays for heavy metal ions based on the use of nanoparticles and receptor molecules

This review (with 230 refs.) covers recent progress in rapid optical assays for heavy metals (primarily lead and mercury as the most relevant) based on the use of nanoparticles and receptor molecules. An introduction surveys the importance, regulatory demands (such as maximum permissible concentrations) and potential and limitations of various existing methods. This is followed by a general discussion on the use of nanoparticles in optical assays of heavy metals (including properties, basic mechanisms of signal generation). The next sections cover methods for the functionalization of nanoparticles with (a) sulfur-containing compounds (used for modification of nanoparticles or added to the reaction medium), (b) nitrogen-containing compounds (such as amino acids, polypeptides, and heterocyclic molecules), and (c) oxygen-containing species (such as hydroxy and carbonyl compounds). This is continued by a specific description of specific assays based on the use of aptamers as receptors, on the use of deoxyribozymes as synthetic reaction catalysts, of G-quadruplex aptamers, of aptamers in logic gate-type of assays of linear (unstructured) aptamers ("hairpins"), and on the use of aptamers in lateral flow assays. A next section covers assays based on the employment of antibodies as receptors (used in the immunoassay development). The properties of various nanoparticles and their applicability in optical assays are also discussed in some detail. Final sections discuss the selectivity of assays, potential interferences by other cations, methods for their elimination, and also matrix effects and approaches for sample pretreatment. A concluding section discusses current challenges and future trends. Analysis based on enzyme inhibition assay is not treated here but enzyme-like action of some receptor molecules such as DNAzymes is discussed. Graphical abstract Schematic presentation of main principles of application of various nanoparticles with receptor molecules (S-, N-, O-containing, heterocyclic compounds, proteins, antibody, aptamers) for heavy metals ions detection. The included methods cover optical assays with description of mechanisms of interactions and signal generation.

A competitive colorimetric chloramphenicol assay based on the non-cross-linking deaggregation of gold nanoparticles coated with a polyadenine-modified aptamer

A competitive colorimetric assay has been established to detect chloramphenicol (CAP). It is based on the use of colloidal and electrostatically stabilized aptamer-modified gold nanoparticles (GNPs). The CAP aptamer is modified by a sequence of 5 adenosine groups to anchor it on the surface of GNPs. It can competitively capture two compounds, viz. D-(-)-threo-2-amino-1-(4-nitrophenyl)-1,3-propanediol (CAP-base, with a positive charge) and CAP (which is uncharged). The capture of the positively charged CAP-base triggers the aggregation of modified GNPs in salt-containing solution, and this causes a color change from red to purple. However, in the presence of CAP and CAP-base, the capture of the uncharged CAP weakens this color change by a competing process for capture. Thus, the concentration of CAP is associated with the degree of deaggregation of GNPs and can be quantified by the ratio of absorbances at 620 nm and 520 nm. The assay has a 22 nM limit of detection in acidic solution, and the response is linear in the range of 0.20 to 3.20 μM CAP concentration. This assay was successfully applied to the determination of CAP in spiked environmental water samples. Conceivably, this method has a wide scope in that it may be applied to a wide range of analytes if respective aptamers are available. Graphical abstract Schematic presentation of a competitive non-cross linking deaggregating method for detecting chloramphenicol. The surface charge of polyA-Apt@GNPs and its aggregation degree (purple) are determined by the charge of target. (CAP-base: precursor of CAP; PolyA-Apt@GNPs: 5'-polyA-modified DNA aptamer functionalized gold nanoparticles.).

Protamine-stabilized gold nanoclusters as a fluorescent nanoprobe for lead(II) via Pb(II)-Au(I) interaction

The authors report on a one-pot approach for synthesizing highly fluorescent protamine-stabilized gold nanoclusters. These are shown to be a viable nanoprobe for selective and sensitive fluorometric determination of lead(II) via quenching of fluorescence via Pb(II)-Au(I) interaction. Under optimized conditions, fluorescence measured at excitation/emission peaks of 300/599 nm drops in the 80 nM-15 μM lead(II) concentration range. The detection limit is 24 nM, and relative standard deviations (for n = 11) at concentrations of 0.10, 4.0 and 15 μM are 1.6, 2.5 and 1.9%, respectively. The relative recoveries of added lead(II) in the water samples ranged from 97.9 ± 2.29% to 101.2 ± 1.83%. Graphical abstract Lead(II) ions are found to be able to selectively and sensitively quench the fluorescence of the protamine-gold nanoclusters (PRT-AuNCs). Thereby, an inexpensive, selective and sensitive lead(II) assay was established.

Triple-helix molecular switch-based aptasensors and DNA sensors

Utilization of traditional analytical techniques is limited because they are generally time-consuming and require high consumption of reagents, complicated sample preparation and expensive equipment. Therefore, it is of great interest to achieve sensitive, rapid and simple detection methods. It is believed that nucleic acids assays, especially aptamers, are very important in modern life sciences for target detection and biological analysis. Aptamers and DNA-based sensors have been widely used for the design of various sensors owing to their unique features. In recent years, triple-helix molecular switch (THMS)-based aptasensors and DNA sensors have been broadly utilized for the detection and analysis of different targets. The THMS relies on the formation of DNA triplex via Watson-Crick and Hoogsteen base pairings under optimal conditions. This review focuses on recent progresses in the development and applications of electrochemical, colorimetric, fluorescence and SERS aptasensors and DNA sensors, which are based on THMS. Also, the advantages and drawbacks of these methods are discussed.