Simultaneous determination of dopamine and uric acid in the presence of ascorbic acid using a gold electrode modified with carboxylated graphene and silver nanocube functionalized polydopamine nanospheres

Recent progress and future perspectives of polydopamine nanofilms toward functional electrochemical sensors

Since its discovery in 2007, polydopamine nanofilms have been widely used in many areas for surface functionalization. The simple and low-cost preparation method of the nanofilms with tunable thickness can incorporate amine and oxygen-rich chemical groups in virtually any interface. The remarkable advantages of this route have been successfully used in the field of electrochemical sensors. The self-adhesive properties of polydopamine are used to attach nanomaterials onto the electrode's surface and add chemical groups that can be explored to immobilize recognizing species for the development of biosensors. Thus, the combination of 2D materials, nanoparticles, and other materials with polydopamine has been successfully demonstrated to improve the selectivity and sensitivity of electrochemical sensors. In this review, we highlight some interesting properties of polydopamine and some applications where polydopamine plays an important role in the field of electrochemical sensors.

A sensing platform based on Cu-MOF encapsulated Dawson-type polyoxometalate crystal material for electrochemical detection of xanthine

A promising sensing platform based on polyoxometalate-based metal-organic framework (POMOF) was established for sensitive electrochemical detection of xanthine (XA). In the unique structure of POMOF, the Dawson polyoxoanions P₂W₁₈ were encapsulated into 3D open copper-mixed ligand nanotube framework Cu-MOF, in which the cavity of the metal-organic framework provides a specific shelter to prevent the aggregation and loss of polyoxometalate in electrocatalytic reactions; meanwhile, unsaturated Cu(II) active sites of Cu-MOF can also serve as electrocatalytic active center. The POMOF-based sensor (CuMOFP₂W₁₈/XC-72R) was fabricated by using acetylene black (XC-72R) as a support material to enhance the conductivity of POMOF. The performances of the POMOF-based sensor were studied by using different electrochemical testing methods. The composite displayed remarkable electrocatalytic activity for the oxidation of XA due to the synergistic effect of polyoxometalate (POM) and metal-organic framework (MOF). The electrochemical sensor demonstrated a wide linear range (0.5 μM-240 μM), low detection limit (0.26 μM), and excellent selectivity for detecting XA. Furthermore, the composite further demonstrated excellent reproducibility and great stability. More importantly, the proposed sensor was utilized to detect XA in real samples, which may provide a new way for early disease diagnosis.

Overoxidized poly(3,4-ethylenedioxythiophene)-gold nanoparticles-graphene-modified electrode for the simultaneous detection of dopamine and uric acid in the presence of ascorbic acid

An innovative, ternary nanocomposite composed of overoxidized poly(3,4-ethylenedioxythiophene) (OPEDOT), gold nanoparticles (AuNPs), and electrochemically reduced graphene oxide (ERGO) was prepared on a glassy carbon electrode (GCE) (OPEDOT–AuNPs–ERGO/GCE) through homogeneous chemical reactions and heterogeneous electrochemical methods. The morphology, composition, and structure of this nanocomposite were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical properties of the OPEDOT–AuNPs–ERGO/GCE were investigated by cyclic voltammetry using potassium ferricyanide and hexaammineruthenium(III) chloride redox probe systems. This modified electrode shows excellent electro-catalytic activity for dopamine (DA) and uric acid (UA) under physiological pH conditions, but inhibits the oxidation of ascorbic acid (AA). Linear voltammetric responses were obtained when DA concentrations of approximately 4.0–100 μM and UA concentrations of approximately 20–100 μM were used. The detection limits (S/N=3) for DA and UA were 1.0 and 5.0 μM, respectively, under physiological conditions and in the presence of 1.0 mM of AA. This developed method was applied to the simultaneous detection of DA and UA in human urine, where satisfactory recoveries from 96.7% to 105.0% were observed. This work demonstrates that the developed OPEDOT–AuNPs–ERGO ternary nanocomposite, with its excellent ion-selectivity and electro-catalytic activity, is a promising candidate for the simultaneous detection of DA and UA in the presence of AA in physiological and pathological studies.

•

Facile preparation of graphene-based hybrid composite OPEDOT–AuNPs–ERGO onto GCE.

•

The OPEDOT–AuNPs–ERGO/GCE was endued with excellent electrocatalytic activity and ion-selectivity.

•

The OPEDOT–AuNPs–ERGO/GCE was found highly selective and sensitive determination of DA and UA in the presence of AA.

•

The method is expected to be applied to the detection of DA and UA under physiological and pathological conditions.

Achievements of Graphene and Its Derivatives Materials on Electrochemical Drug Assays and Drug-DNA Interactions

Graphene, emerging as a true two-dimensional (2D) material, has attracted increasing attention due to its unique physical and electrochemical properties such as high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass production. The entire scientific community recognizes the significance and potential impact of graphene. Electrochemical detection strategies have advantages such as being simple, fast, and low-cost. The use of graphene as an excellent interface for electrode modification provides a promising way to construct more sensitive and stable electrochemical (bio)sensors. The review presents sensors based on graphene and its derivatives for electrochemical drug assays from pharmaceutical dosage forms and biological samples. Future perspectives in this rapidly developing field are also discussed. In addition, the interaction of several important anticancer drug molecules with deoxyribonucleic acid (DNA) that was immobilized onto graphene-modified electrodes has been detailed in terms of dosage regulation and utility purposes.

Fabrication strategies and surface tuning of hierarchical gold nanostructures for electrochemical detection and removal of toxic pollutants

The intensive research on the synthesis and characterization of gold (Au) nanostructures has been extensively documented over the last decades. These investigations allow the researchers to understand the relationships between the intrinsic properties of Au nanostructures such as particle size, shape, morphology, and composition to synthesize the Au nano/hybrid nanostructures with novel physicochemical properties. By tuning the properties above, these nanostructures are extensively employed to detect and remove trace amounts of toxic pollutants from the environment. This review attempts to document the achievements and current progress in Au-based nanostructures, general synthetic and fabrication strategies and their utilization in electrochemical sensing and environmental remediation applications. Additionally, the applications of Au nanostructures (e.g., as adsorbents, sensing platforms, catalysts, and electrodes) and advancements in the field of electrochemical sensing of different target analytes (e.g., proteins, nucleic acids, heavy metals, small molecules, and antigens) are summarized. The literature survey concludes the existing methods for the detection of toxic contaminants at various concentration levels. Finally, the existing challenges and future research directions on electrochemical sensing and degradation of toxic contaminants using Au nanostructures are defined.

Gold Nanoparticles/Carbon Nanotubes and Gold Nanoporous as Novel Electrochemical Platforms for L-Ascorbic Acid Detection: Comparative Performance and Application

Herein, the effects of nanostructured modifications of a gold electrode surface in the development of electrochemical sensors for L-ascorbic acid detection have been investigated. In particular, a bare gold electrode has been modified by electrodeposition of gold single-walled carbon nanotubes (Au/SWCNTs) and by the formation of a highly nanoporous gold (h-nPG) film. The procedure has been realized by sweeping the potential between +0.8 V and 0 V vs. Ag/AgCl for 25 scans in a suspension containing 5 mg/mL of SWCNTs in 10 mM HAuCl4 and 2.5 M NH4Cl solution for Au/SWCNTs modified gold electrode. A similar procedure was applied for a h-nPG electrode in a 10 mM HAuCl4 solution containing 2.5 M NH4Cl, followed by applying a fixed potential of −4 V vs. Ag/AgCl for 60 s. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the properties of the modified electrodes. The developed sensors showed strong electrocatalytic activity towards ascorbic acid oxidation with enhanced sensitivities of 1.7 × 10−2 μA μM−1cm−2 and 2.5 × 10−2 μA μM−1cm−2 for Au/SWCNTs and h-nPG modified electrode, respectively, compared to bare gold electrode (1.0 × 10−2 μA μM−1cm−2). The detection limits were estimated to be 3.1 and 1.8 μM, respectively. The h-nPG electrode was successfully used to determine ascorbic acid in human urine with no significant interference and with satisfactory recovery levels.

Nitrogen-doped carbon frameworks decorated with palladium nanoparticles for simultaneous electrochemical voltammetric determination of uric acid and dopamine in the presence of ascorbic acid

A glassy carbon electrode (GCE) was modified with nitrogen-enriched carbon frameworks decorated with palladium nanoparticles (Pd@NCF/GCEs). The modified GCE is shown to be a viable tool for determination of uric acid (UA) and dopamine (DA) in the presence of ascorbic acid (AA). The Pd@NCF was fabricated though one-step pyrolysis and characterized by X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy and nitrogen-adsorption/desorption analysis. The Pd@NCF/GCE was characterized by differential pulse voltammetry (DPV). Both UA and DA have pronounced oxidation peaks (at 360 mV for UA and 180 mV for DA, all vs. Ag/AgCl) in the presence of AA. Response is linear in the 0.5-100 μM UA concentration range and in the 0.5-230 μM DA concentration range. The detection limits are 76 and 107 nM, respectively (at S/N = 3). This electrode is stable, reproducible and highly selective. It was used for UA and DA determination in spiked serum samples. Graphical abstractSchematic representation of nitrogen-enriched carbon frameworks decorated with palladium nanoparticles co-modified glassy carbon electrode for simultaneous determination of dopamine and uric acid in the presence of ascorbic acid.

Nonenzymatic amperometric dopamine sensor based on a carbon ceramic electrode of type SiO2/C modified with Co3O4 nanoparticles

An amperometric nonenzymatic dopamine sensor has been developed. Cobalt oxide (Co₃O₄) nanoparticles were uniformly dispersed inside mesoporous SiO₂/C. A sol-gel process was used for the preparation of this mesoporous composite material (SiO₂/C). This mesoporous composite has a pore size of around 13-14 nm, a large surface area (S_BET 421 m²·g^-1) and large pore volume (0.98 cm³·g^-1) as determined by the BET technique. The material compactness was confirmed by SEM images which showing that there is no phase segregation at the magnification applied. The chemical homogeneity of the materials was confirmed by EDX mapping. The SiO₂/C/Co₃O₄ nanomaterial was pressed in desk format to fabricate a working electrode for nonenzymatic amperometric sensing of dopamine at a pH value of 7.0 and at a typical working potential of 0.25 V vs SCE. The detection limit, linear response range and sensitivity are 0.018 μmol L^-1, 10-240 μmol L^-1, and 80 μA·μmol L^-1 cm^-2, respectively. The response timé of the electrode is less than 1 s in the presence of 60 μmol L^-1 of dopamine. The sensor showed chemically stability, high sensitivity and is not interfered by other electroactive molecules present in blood. The repeatability of this sensor was evaluated as 1.9% (RSD; for n = 10 at a 40 μmol L^-1 dopamine level. Graphical abstract Schematic presentation of the preparation of a nanostructured composite of type SiO₂/C/Co₃O₄ for electrooxidative sensing of dopamine.

Golf ball-like MoS2 nanosheet arrays anchored onto carbon nanofibers for electrochemical detection of dopamine

Arrays of molybdenum(IV) disulfide nanosheets resembling the shape of golf balls (MoS₂ NSBs) were deposited on carbon nanofibers (CNFs), which are shown to enable superior electrochemical detection of dopamine without any interference by uric acid. The MoS₂ NSBs have a diameter of ∼ 2 μm and are made up of numerous bent nanosheets. MoS₂ NSBs are connected by the CNFs through the center of the balls. Figures of merit for the resulting electrode include (a) a sensitivity of 6.24 μA·μM^-1·cm^-2, (b) a low working voltage (+0.17 V vs. Ag/AgCl), and (c) a low limit of detection (36 nM at S/N = 3). The electrode is selective over uric acid, reproducible and stable. It was applied to the determination of dopamine in spiked urine samples. The recoveries at levels of 10, 20 and 40 μM of DA are 101.6, 99.8 and 107.8%. Graphical abstract Schematic presentation of the golf ball-like MoS₂ nanosheet balls/carbon nanofibers (MoS₂ NSB/CNFs) by electrospining and hydrothermal process to detect dopamine (DA).

Low fouling electrochemical sensing in complex biological media by using the ionic liquid-doped conducting polymer PEDOT: application to voltammetric determination of dopamine

An electrochemical sensor that can resist biofouling even when operated in complex biological medium is developed for the determination of dopamine. It is based on the use of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) that is doped with the water insoluble ionic liquid (IL), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A glassy carbon electrode modified with PEDOT/IL is shown to enable accurate determination of dopamine, as a model analyte in the presence of high concentrations of proteins, and resist biological fouling even in native serum. It exhibited a low limit of detection of 33 nM for the detection of dopamine, with a wide linear range from 0.2 to 328 μM (at 0.2 V vs. saturated calomel electrode). The PEDOT/IL modified glassy carbon electrode has a porous microstructure, high electrical conductivity and good stability. The sensor can be used to quantify dopamine in human urine samples with satisfying accuracy. Graphical abstract An antifouling electrochemical sensor capable of detecting target in complex biological samples was developed based on the use of a conducting polymer (PEDOT) that was doped with a water insoluble ionic liquid.

Electrochemical sensor based on a nanocomposite prepared from TmPO4 and graphene oxide for simultaneous voltammetric detection of ascorbic acid, dopamine and uric acid

A nanocomposite is described that consists of TmPO₄ and graphene oxide (GO) and is used to modify a glassy carbon electrode (GCE) to obtain a sensor for simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). GO and TmPO₄ were synthesized via the Hummers method and by a hydrothermal method, respectively. The nanocomposite was characterized by transmission electron microscopy, energy dispersive X-ray spectroscopy, powder X-ray diffraction and Fourier transform infrared spectroscopy. The electrochemical properties of the modified GCE were studied by electrochemical impedance spectroscopy and cyclic voltammetry. The good performance of the modified GCE results from the synergistic effects between GO with its good electrical conductivity and of TmPO₄ as the electron mediator that accelerates the electron transfer rate. Compared to a bare GCE, a GO/GCE and a TmPO₄/GCE, the GO/TmPO₄/GCE exhibits three well-defined and separated oxidation peaks (at -0.05, +0.13 and + 0.26 V vs. SCE). Responses to AA, DA and UA are linear in the 0.1-1.0 mM, 2-20 μM and 10-100 μM concentration ranges, respectively. Graphical abstract Schematic presentation of a nanocomposite that consists TmPO₄ and graphene oxide (GO) and is used to modify a glassy carbon electrode (GCE) to obtain a sensor for simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA).

Electrochemical dopamine sensor based on the use of a thermosensitive polymer and an nanocomposite prepared from multiwalled carbon nanotubes and graphene oxide

An electrochemical dopamine sensor with a temperature-controlled switch was constructed by using a mixture of thermo-sensitive block copolymers (type tBA-PDEA-tBA), graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs). If the temperature is below 26 °C, the polymer on the glassy carbon electrode (GCE) is stretched, the distance between the MWCNTs is large, and the charge transfer resistance (R_ct) of the composite also is large. In the presence of dopamine, the electron transfer at the electrode is strongly retarded and in the "off" state. At above 38 °C, the polymer is shrunk and the R_ct is much smaller. The presence of dopamine results in a rapid electron transfer at the GCE, and this is referred to as the "on" state. At temperatures between 26 and 38 °C, the polymer shrinks slightly and has a "spring-like" state. There is a linear relationship between the response current (typically measured at a potential as low as 0.16 V vs. Ag/AgCl) and temperature. The response to dopamine is linear in the 0.06 to 4.2 μM and 4.2 to 18.2 μM concentration range, and the detection limit is 42 nM. Conceivably, this approach provides a novel approach towards the design of electrochemical sensors based on the use of thermo-sensitive polymers. Graphical abstract Schematic presentation of reversible and temperature-controlled electrochemical response of dopamine on the thermo-sensitive block copolymers (tBA-PDEA-tBA) / multi-walled carbon nanotubes (MWCNTs) / graphene oxide (GO) / glassy carbon electrode (GCE).

Superlattice stacking by hybridizing layered double hydroxide nanosheets with layers of reduced graphene oxide for electrochemical simultaneous determination of dopamine, uric acid and ascorbic acid

A self-assembled periodic superlattice material was obtained by integrating positively charged semiconductive sheets of a Zn-NiAl layered double hydroxide (LDH) and negatively charged layers of reduced graphene oxide (rGO). The material was used to modify a glassy carbon electrode which then is shown to be a viable sensor for the diagnostic parameters dopamine (DA), uric acid (UA) and ascorbic acid (AA). The modified GCE displays excellent electrocatalytic activity towards these biomolecules. This is assumed to be due to the synergistic effects of (a) excellent interfacial electrical conductivity that is imparted by direct neighboring of conductive rGO to semiconductive channels of LDHs, (b) the superb intercalation feature of LDHs, and (c) the enlarged surface with an enormous number of active sites. The biosensor revealed outstanding electrochemical performances in terms of selectivity, sensitivity, and wide linear ranges. Typically operated at working potentials of -0.10, +0.13 and + 0.27 V vs. saturated calomel electrode, the lower detection limits for AA, DA and UA are 13.5 nM, 0.1 nM, and 0.9 nM, respectively, at a signal-to-noise ratio of 3. The sensor was applied to real-time tracking of dopamine efflux from live human nerve cells. Graphical abstract Schematic of the preparation of a superlattice self-assembled material by integrating positively charged semiconductive sheets of Zn-NiAl layered double hydroxide (LDH) with negatively charged reduced graphene oxide (rGO) layers. It was applied to simultaneous electrochemical detection of dopamine (DA), uric acid and ascorbic acid.