Colorimetric determination of sialic acid based on boronic acid-mediated aggregation of gold nanoparticles

Designing stimuli-responsive upconversion nanoparticles based on a mimetic immunoassay for potential accurate diabetic nephropathy diagnosis

Diabetic nephropathy (DN) is the most common microvascular complication associated with incurable diabetes. The gold standard diagnostic method for DN is based on the detection of proteinuria but it overlooks cases of non-proteinuria (NP-DN). To address this limitation, urinary sialic acid (SA) has been confirmed as an effective biomarker for various DNs. Herein, we constructed an ultrasensitive non-proteinuria assay platform to accurately diagnose DN within 20 min. This platform utilized the ninhydrin reaction between acidic ninhydrin and urinary sialic acid (SA) as an effective biomarker for various DNs. A compound with a maximum absorption peak at 470 nm was produced in this reaction and contributed to the fluorescence decrease of the blue-emission core-shell upconverting nanoparticles through the inner filter effect (IFE). By integrating the inner filter effect (IFE) with a mimetic immunoassay, the imperceptible color was converted into highly sensitive fluorescence signals. This protocol shows a stable and high sensitivity with a detection limit of 20 nmol L-1 and provides 100% positive prediction for urine samples, demonstrating its potential for clinical diagnosis and long-term monitoring of DN.

A reactive matrix for in situ chemical derivatisation and specific detection of cis-diol compounds by matrix-assisted laser desorption/ionisation mass spectrometry

Analysis of cis-diol compounds is essential, because they play important roles in cosmetics, food, pharmaceuticals, and living organisms. Herein, we describe the development of a matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS) method to analyse cis-diol compounds. In this method, a 6-borono-1-methylquinoline-1-ium (BMQI) reactive matrix was designed for in situ derivatisation of cis-diol compounds based on the boronate affinity interaction between boronic acid and cis-diol groups. Compared to traditional commercial matrices and other boronic acid reagents, BMQI can significantly accelerate the desorption/ionisation process, improve reproducibility, exhibit free background interference, and enhance signal intensity in the analysis of various cis-diol compounds even for amounts as low as 1 nmol. The BMQI-assisted laser desorption/ionisation mass spectrometry (LDI-MS) was successfully applied to the rapid screening and identification of sugar alcohols in different sugar-free foods. This work provides an alternative method to the LDI-MS analysis of cis-diol-containing molecules, and the method can be extended to other food samples and biofluids.

Toxic Ag+ detection based on Au@Ag core shell nanostructure formation using Tannic acid assisted synthesis of Pullulan stabilized gold nanoparticles

Herein, a sensitive colorimetric detection strategy is proposed for Ag⁺ detection based on the use of environmentally friendly synthesis of gold nanoparticles (AuNPs), at room temperature, using (tannic acid, TA), as the reductant and pullulan (PUL) as stabilizing agent. The colloidal solution (TA/PUL-AuNPs), at the optimal synthesis conditions, showed maximum absorbance at 529 nm with a berry red color. TEM and FESEM validated that the particles are spherical and monodispersed, while other characterization results elucidated the role of pullulan in the nano-synthesis. Ag⁺ addition to the probe (TA/PUL-AuNPs), pH 11, resulted in naked-eye color changes, owing to Au@Ag core shell nanostructure formation. Further, the added Ag⁺ is reduced to AgNPs, on the surface of the TA/PUL-AuNPs probe. A hypsochromic shift in the absorption maximum, from 529 to 409 nm was observed, while (A_Ag+-A_bl)@409 nm exhibited linearity with Ag⁺ concentrations, from 0.100 to 150 µM. The estimated limit of detection was 30.8 nM, which is far lower than the acceptable limit of 0.930 µM from the regulatory agency. The TA/PUL-AuNPs probe was further tested for Ag⁺ detection in lake water samples, and it displayed satisfactory detection performances for real sample applications.

A Schematic Colorimetric Assay for Sialic Acid Assay Based on PEG-Mediated Interparticle Crosslinking Aggregation of Gold Nanoparticles

Sialic acid (SA) is a well-known component of glycoproteins, which have applications in various functional processes on the cell's surface. The colorimetric is a simpler and more convenient method for measuring SA due to its low-cost apparatus and visual signal changes. This work focused on the unpredictable interparticle crosslinking aggregation of the functionalized gold nanoparticles (AuNPs) in complex media. We proposed a balance of the Derjaguin-Landau-Verwey-Overbeek (DLVO)-type aggregation and molecule-based interaction method to solve this problem. Here, we report a novel colorimetric assay for the determination of SA using 4-mercaptophenyl boronic acid (4-MPBA) as an analyte's recognition molecule, and negative charge PEG₄₀₀ was used to repulsive the interparticle crosslinking. The proposed sensing platform shows a linear relationship between the ratio of the absorbance intensity (A₅₂₅/A₆₆₀) and concentration of SA from 0.05 to 8 mM (R² = 0.997) and a detection limit of 48 μM was observed. The novel gold-based colorimetric sensor is easy to fabricate, reproducible in its test performance and has been successfully applied for the detection of SA in biological and healthcare product samples.

Molecularly imprinted polymers for selective extraction/microextraction of cancer biomarkers: A review

Over recent years, great efforts have been extensively documented in top scientific journals on the development of methods for early diagnosis, treatment, and monitoring of cancers which are prevalent critical diseases with a high mortality rate among men and women. The determination of cancer biomarkers using different optimum methodologies is one of the finest options for achieving these goals with more precision, speed, and at a lower cost than traditional clinical procedures. In this regard, while focusing on specific biomarkers, molecularly imprinted technology has enabled novel diagnostic techniques for a variety of diseases. Due to the well-known advantages of molecularly imprinted polymers (MIPs), this review focuses on the current trends of MIPs-based extraction/microextraction methods, specifically targeting cancer biomarkers from various matrices. These optimized methods have demonstrated high selectivity, accuracy, sorbent reusability, extraction recovery, and low limits of detection and quantification for a variety of cancer biomarkers, which are a powerful tool to provide early diagnosis, prognosis, and treatment monitoring, with potential clinical application expected soon. This review highlights the key progress, specific modifications, and strategies used for MIP synthesis. The future perspectives for cancer biomarkers purification and determination by fabricating MIP-based techniques are also discussed.

Monolayer-Protected Gold Nanoparticles Functionalized with Halogen Bonding Capability─An Avenue for Molecular Detection Schemes

The use of functionalized nanoparticles (NPs) and their aggregation in the presence of a targeted analyte is a well-established molecular detection strategy predicated on harnessing specific molecular interactions to the NP periphery. Molecules able to specifically interact with the functionalized NPs alter the unique optical and electrochemical properties of the NPs as a function of interparticle spacing. While many intermolecular interactions have been successfully exploited in this manner in conjunction with aqueous NP systems, the use of non-aqueous NPs in the same capacity is significantly less explored. A fundamental interaction that has not been previously investigated in NP schemes is halogen bonding (XB). XB is an orthogonal, electrostatic interaction between a region of positive electrostatic potential (δ+) on a halogen atom (i.e., XB donor) and a negative (δ-) Lewis base (XB acceptor) molecule. To couple XB with NP systems, ligands featuring a molecular structure that promotes XB interactions need to be identified, optimized, and synthesized for subsequent attachment to NPs. Herein, density functional theory (DFT) and NMR techniques are used to identify a strong XB-donor moiety (-C₆F₄I) and a synthetic scheme for a thiolate ligand featuring that functionality is devised and executed with high purity/yield (78%). Ligand-exchange reactions allow functionalization of non-aqueous alkanethiolate-protected gold NPs or monolayer-protected clusters (MPCs) with the XB-donor ligands. Functionalized MPCs (f-MPCs), within both assembled films and in solution, are shown to engage in XB interactions with target XB-acceptor molecules. Molecular recognition events, including induced aggregation of the f-MPCs, are characterized with UV-vis spectroscopy, cyclic voltammetry, TEM imaging, and diffusion-ordered spectroscopy NMR with limits of detection of 50-100 nM for strong XB acceptors. While fundamental exploration of XB interactions is ongoing, this study represents a step toward utilizing XB within molecular detection schemes, an application with implications for supramolecular chemistry, forensic, and environmental chemical sensing.

3-Aminophenylboronic acid-mediated aggregation of gold nanoparticles for colorimetric sensing of iohexol in environmental and biological samples

Iohexol (IHO), as one of iodinated X-ray contrast, is often used as not only a chemical marker for tracking wastewater contamination in aquatic environment, but also an ideal glomerular filtration rate marker for explorating kidney disease. To these aims, it is important to establish reliable, fast, and cheap methods to detect IHO in environmental and biological samples. This work describes for the first time the development of a selective, sensitive and reliable colorimetric sensing assay for the fast determination of IHO in environmental and biological samples based on 3-aminophenylboronic acid (3-APBA) mediated aggregation of gold nanoparticles (AuNPs). In this approach, 3-APBA can assemble on the AuNPs surface through electrostatic interaction between its amino groups with the negatively charged citrate stabilizer of AuNPs to form AuNP@3-APBA. Subsequently, the aggregation and visual color change of the assembled AuNP@3-APBA are induced by the covalent reaction between boronic acid ligands of 3-APBA and cis-diols of IHO. The developed assay presented a very simple operating procedure and a rapid analysis time of around 10 min. The developed assay also exhibited good selectivity and a low limit of detection (LOD) of 0.005 mM for detecting IHO. Moreover, the developed assay showed comparable accuracy and precision to the high-performance liquid chromatography-diode array detector (HPLC-DAD) method when used for the rapid determination of IHO in river water and human urine samples. The recoveries of IHO at three spiking levels were in the range of 91.5-106.3% with relative standard deviation (RSD) values below 6.39%.

In Situ Determination of Sialic Acid on Cell Surface with a pH-Regulated Polymer Enzyme Nanoreactor

Sialic acid (SA) is an important monosaccharide that is involved in incurable cancer immunotherapy. However, it is difficult to detect SA in situ using the existing strategy based on the SA-terminated glycopeptide extraction from the cell lysate. The countermeasures of the bottleneck caused by cell disruption and peptide extraction should be designed based on a "cell-surface attachment and controlled enzymolysis" protocol. Herein, a poly(styrene-co-maleic anhydride-acrylic acid-concanavalin A) (PSM-PAA-ConA) was synthesized and developed as a pH-regulated enzyme nanoreactor after being loaded with sialidase and myoglobin. The nanoreactor showed controllable biocatalysis induced by a cascade enzyme reaction and applied for the in situ detection of SA on a living cell surface. The addition of an acidic solution resulted in a decrease in the size of the nanoreactor and enhancement of its permeability, triggering an "on" state of the SA catalysis. Subsequent pH increase led to increased hydrophilicity of the nanoreactor, increasing its size and resulting in the catalytic "off" state. ConA assisted the cell-surface attachment of the enzyme reactor. Furthermore, SA on the surface of living cancer cells was successfully monitored by the pH-regulated enzyme nanoreactor, demonstrating the feasibility of high specificity in situ analysis for SA. This pH-induced catalytic efficiency control by the enzyme nanoreactor provides a potential platform for functional stimuli-responsive catalytic systems as well as a strategy for in situ analysis of biomolecules on the cell surface.

Synthesis of gold nanoparticles/polyaniline boronic acid/sodium alginate aqueous nanocomposite based on chemical oxidative polymerization for biological applications

Gold nanoparticles/polyaniline boronic acid/sodium alginate aqueous nanocomposite ((PABA-SAL)@AuNPs) was fabricated. Aniline boronic acid (ABA) served as reductant of gold salt, all within the SAL solution. While ABA reduced gold salt to its nanoparticles, the ABA monomer was also oxidized to its conducting polymeric form (PABA). The presence of PABA in the reaction mixture exerted solubility and stability challenge, thus SAL was used as stabilizer and solubilizer for PABA. The numerous cis-diol groups of SAL could bind to boronic acid groups of PABA to furnish PABA-SAL repeating polymer structure for AuNPs anchoring. Sparkling ruby red (PABA-SAL)@AuNPs have absorption peaks at 529 and 718 nm. Average particle sizes of nanocomposite were within 15-20 nm, with hydrodynamic diameter of 48.6 ± 0.9 nm, zeta potential of -32.5 ± 1.6 mV and conductivity value of 2015.3 ± 3.2 μS/cm. (PABA-SAL)@AuNPs possessed antibacterial activities against seafood associated bacterial isolates, with MIC and MBC ranging from 4 to 8 μg/mL. The moderate antioxidant capacity of (PABA-SAL)@AuNPs was observed, without any deleterious damages on human red blood cells. It also has good biocompatibility on Caco-2 and RAW 264.7, with cell viability not less than 70%. These results confirm the high prospect of (PABA-SAL)@AuNPs for possible biomedical applications.

Autoencoder based blind source separation for photoacoustic resolution enhancement

Photoacoustics is a promising technique for in-depth imaging of biological tissues. However, the lateral resolution of photoacoustic imaging is limited by size of the optical excitation spot, and therefore by light diffraction and scattering. Several super-resolution approaches, among which methods based on localization of labels and particles, have been suggested, presenting promising but limited solutions. This work demonstrates a novel concept for extended-resolution imaging based on separation and localization of multiple sub-pixel absorbers, each characterized by a distinct acoustic response. Sparse autoencoder algorithm is used to blindly decompose the acoustic signal into its various sources and resolve sub-pixel features. This method can be used independently or as a combination with other super-resolution techniques to gain further resolution enhancement and may also be extended to other imaging schemes. In this paper, the general idea is presented in details and experimentally demonstrated.

Indicator Displacement Assay Inside Dye-Functionalized Covalent Organic Frameworks for Ultrasensitive Monitoring of Sialic Acid, an Ovarian Cancer Biomarker

Identifying biomolecules for disease diagnosis requires simple, accurate, and reliable analytical techniques. Multiple signal transduction pathways have promoted the development of various biological analysis systems. However, most systems are largely limited by a single mechanism or model analysis, which can easily lead to false-positive/negative results. Herein, we report a covalent organic framework (COF) (TpPa-1) functionalized with a dye (fluorescein sodium) and design this hybrid material (TpPa-1@Dye) to fabricate hydrogels for subsequent analysis with the indicator displacement assay (IDA) method. Selecting a suitable metal cation (Cr³⁺) for the preparation of hydrogels can reduce the background fluorescence, improve the detection sensitivity, and increase the corresponding sensing selectivity. The TpPa-1@Dye functions as an indicator in the IDA-in-COF system, and Cr³⁺ is a receptor of the analyte (sialic acid (SA), a biomarker for ovarian cancer diagnosis). Based on the above studies, the integrative logic operations (AND + IMP) are further established, it helps in elucidating the design rules of the IDA-in-COF approach. This work represents the first effort in designing IDA-in-COF luminescent sensors with an On-Off-On mechanism to determine biomarkers and provides a new approach for developing hybrid COF luminescent materials as analysis platforms for human health monitoring.

Sensitive and selective colorimetric probe for fluoride detection based on the interaction between 3-aminophenylboronic acid and dithiobis(succinimidylpropionate) modified gold nanoparticles

APBA was conjugated on DSP@AuNP to form stable APBA–DSP@AuNP, exhibiting high selectivity towards fluoride against other anions and glucose.

Label-free fluorescence assay based on near-infrared B,N-doped carbon dots as a fluorescent probe for the detection of sialic acid

A simple and sensitive sensing strategy for sialic acid activity detection on the basis of novel near-infrared B,N co-doped carbon dots was constructed.