A colorimetric aptasensor for the antibiotics oxytetracycline and kanamycin based on the use of magnetic beads and gold nanoparticles

Colorimetric aptasensor based on magnetic beads and gold nanoparticles for detecting mucin 1

In this work, a colorimetric aptasensor based on magnetic beads (MBs), gold nanoparticles (AuNPs) and Horseradish Peroxidase (HRP) was prepared for the detection of mucin 1 (MUC1). Complementary DNA of the MUC1 aptamer (Apt) immobilized on the MBs was combined with the prepared AuNPs-Apt-HRP complex (AuNPs@Apt-HRP). In the presence of MUC1, it specifically bound to Apt, resulting in the detachment of gold nanoparticles from the MBs. After magnetic separation, AuNPs@Apt-HRP was separated into the supernatant and reacted with 3,3',5,5'-Tetramethylbenzidine (TMB) to produce color reaction from colorless to blue. The linear range of MUC1 was from 75 to 500 μg/mL (R2 = 0.9878), and the detection limit was 41.95 μg/mL. The recovery rate of MUC1 in human serum was 99.18 %∼101.15 %. This method is simple and convenient. Moreover, it does not require complex and expensive equipment for detection of MUC1. It provides value for the development of MUC1 colorimetric sensors and a promising strategy for the determination of MUC1 in clinical diagnosis.

A robust tag-free aptasensor for fluorescent detection of kanamycin assisted by signal intensification potency of rolling circle amplification

Rolling circle amplification (RCA) process as an excellent DNA amplifier strategy possesses the merits of high performance and easy operation. In this research, a sensitive RCA-based fluorescent aptasensor was fabricated for the detection of kanamycin residues in food. The aptasensing approach consisted of two main steps; immobilization of biotinylated kanamycin aptamer on streptavidin magnetic beads (SMB) and separation of free complementary strands (CS) from the SMB-aptamer/kanamycin at the first step. For the second step, RCA procedure was applied as signal magnifier and SYBR Green was added as fluorescent indicator dye. The linear relation between the aptasensor response and kanamycin concentration was obtained from 5 nM to 100 nM with the detection limit of 1.93 nM (S/N = 3). The aptasensor displayed satisfactory selectivity among other antibiotics. The developed aptasensor is reliable for monitoring kanamycin in milk as a common foodstuff.

Recent advances in aptamer-based platforms for cortisol hormone monitoring

The stressful conditions of today-life make it urgent the timely prevention and treatment of many physiological and psychological disorders related to stress. According to the significant progress made in the near future, rapid, accurate, and on-spot measurement of cortisol hormone as a dominant stress biomarker using miniaturized digital devices is not far from expected. With a special potency in the fields of diagnosis and healthcare monitoring, aptamer-mediated biosensors (aptasensors) are promising for the quantitative monitoring of cortisol levels in the different matrices (sweat, saliva, urine, cerebrospinal fluid, blood serum, etc.). Accordingly, this in-depth study reviews the superior achievements in the aptasensing strategies to detect cortisol hormone with the synergism of diverse two/three dimensional nanostructured materials, enzymatic amplification components, and antibody motifs. The represented discussions offer a universal perspective to achieve lab-on-chip aptasensing arrays as future user-friendly skin-patchable electronic gadgets for on-site and real-time quantification of cortisol levels.

Smartphone-based pH responsive 3-channel colorimetric biosensor for non-enzymatic multi-antibiotic residues

Antibiotic residues in animal-derived food pose a risk to food safety and human health. Here, a smartphone-based pH-responsive 3-channel colorimetric biosensor is constructed for rapid detection of non-enzymatic multi-antibiotic residues in milk. In this system, a magnetic separation and enrichment approach is designed to specifically capture different antibiotic residues in complex environment. Indicators loaded on polydopamine-silver nanoparticles with excellently pH responsive visualization properties are utilized to ensure the high sensitivity of detection system. Moreover, smartphones are introduced to fulfill the demand for portable and on-site inspection of practical applications. It achieves simultaneous detection of oxytetracycline, kanamycin and streptomycin in the linear range of 1-105 pg/mL with detection limits of 0.085, 0.168, and 0.307 pg/mL, respectively. The practicality of the reported multi-antibiotic residues detection system is successfully demonstrated and evaluated challenging milk samples. Therefore, this system demonstrates the wide applications in multi-antibiotic residue analysis and food safety guarantee.

Magnetic separation-assisted cluster-amplified versatile fluorescent aptasensors for the sensitive detection of target biomolecules

A sensitive and versatile platform for detecting diverse target biomolecules was developed by combining a magnetic separation module and a fluorescence amplification module in a plug-and-play manner. The magnetic separation module was constructed using magnetic beads (MBs), whose surfaces were modified with aptamer-blocked captor DNAs. The fluorescence amplification module was constructed by loading the fluorescent dye rhodamine 6G (Rh6G) into the pores of mesoporous silica nanoparticles (MSNs). The MSN surfaces were modified with prey DNAs, of which the MSN-near ends hybridized with complementary DNAs (sealing DNAs) to form duplexes to seal the pores, and the free ends were designed to be single-stranded that were complementary to the captor DNAs. Upon binding of targets to their aptamers, the captor DNAs were unblocked and thus were able to hybridize with the prey DNAs, to capture Rh6G-laden MSNs, forming MB-MSN clusters. The clusters were isolated by magnetic separation and heated to dissociate the DNA duplexes, to unseal the MSN pores and release the inner Rh6G; thus a target was converted into a cluster of Rh6G dyes. By simply changing the target aptamers and related DNA connectors, this strategy detected ATP, thrombin, and platelet-derived growth factor BB with detection limits of 2.1 nM, 4.1 pM, and 2.4 pM, respectively. A wide range of targets, high amplification efficiency and universal functional modules endow the aptasensors with good potential as versatile platforms for detecting target molecules in vitro and in medical research.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Recent Advances in Biomolecular Detection Based on Aptamers and Nanoparticles

The fast, accurate detection of biomolecules, ranging from nucleic acids and small molecules to proteins and cellular secretions, plays an essential role in various biomedical applications. These include disease diagnostics and prognostics, environmental monitoring, public health, and food safety. Aptamer recognition (DNA or RNA) has gained extensive attention for biomolecular detection due to its high selectivity, affinity, reproducibility, and robustness. Concurrently, biosensing with nanoparticles has been widely used for its high carrier capacity, stability and feasibility of incorporating optical and catalytic activity, and enhanced diffusivity. Biosensors based on aptamers and nanoparticles utilize the combination of their advantages and have become a promising technology for detecting of a wide variety of biomolecules with high sensitivity, reliability, specificity, and detection speed. Via various sensing mechanisms, target biomolecules have been quantified in terms of optical (e.g., colorimetric and fluorometric), magnetic, and electrical signals. In this review, we summarize the recent advances in and compare different aptamer-nanoparticle-based biosensors by nanoparticle types and detection mechanisms. We also share our views on the highlights and challenges of the different nanoparticle-aptamer-based biosensors.

Gold Nanoparticles-Based Colorimetric Assays for Environmental Monitoring and Food Safety Evaluation

Recent years have witnessed an exponential increase in the research on gold nanoparticles (AuNPs)-based colorimetric sensors to revolutionize point-of-use sensing devices. Hence, this review is compiled focused on current progress in the design and performance parameters of AuNPs-based sensors. The review begins with the characteristics of AuNPs, followed by a brief explanation of synthesis and functionalization methods. Then, the mechanisms of AuNPs-based sensors are comprehensively explained in two broad categories based on the surface plasmon resonance (SPR) characteristics of AuNPs and their peroxidase-like catalytic properties (nanozyme). SPR-based colorimetric sensors further categorize into aggregation, anti-aggregation, etching, growth-mediated, and accumulation-based methods depending on their sensing mechanisms. On the other hand, peroxidase activity-based colorimetric sensors are divided into two methods based on the expression or inhibition of peroxidase-like activity. Next, the analytes in environmental and food samples are classified as inorganic, organic, and biological pollutants, and recent progress in detection of these analytes are reviewed in detail. Finally, conclusions are provided, and future directions are highlighted. Improving the sensitivity, reproducibility, multiplexing capabilities, and cost-effectiveness for colorimetric detection of various analytes in environment and food matrices will have significant impact on fast testing of hazardous substances, hence reducing the pollution load in environment as well as rendering food contamination to ensure food safety.

Multifunctional fluorescent Eu-MOF probe for tetracycline antibiotics and dihydrogen phosphate sensing and visualizing latent fingerprints†‡

The contamination of tetracycline antibiotics and dihydrogen phosphate (H₂PO₄⁻) in food and the environment is one of the major concerns for human health. Herein, a water-stable carboxyl-functionalized europium metal–organic framework (Eu-MOF) was prepared and demonstrated, for the first time, as a dual-responsive fluorescent sensor of tetracycline antibiotics (oxytetracycline (OTC), tetracycline (TC), and doxycycline (DOX)) and H₂PO₄⁻via fluorescent turn-on and turn-off, respectively. Eu-MOF presents a sensitive and selective detection of OTC with a rapid response time (1 min) and good anti-interference ability. The limits of detection (LODs) of 78 nm, 225 nm, and 201 nM were achieved for OTC, TC, and DOX, respectively. Coordination and hydrogen bonding led to energy and electron transfer from the TC to the MOF, contributing to the fluorescent enhancement mechanism. Moreover, Eu-MOF can effectively detect H₂PO₄⁻via fluorescence turn-off with a LOD of 0.70 μM. The interactions between H₂PO₄⁻ and MOF interrupt the energy transfer from ligand to MOF, leading to fluorescence quenching. In addition, Eu-MOF was successfully applied to determine OTC and H₂PO₄⁻ in real samples, obtaining satisfactory recoveries and RSDs. More fascinating, Eu-MOF could be utilized to develop latent fingerprints on various surfaces, providing well-defined fluorescent fingerprint details in which the sweat pores can be seen with the naked eye.

Water-stable Eu-MOF as a fluorescent probe for detecting tetracycline antibiotics and dihydrogen phosphate in real samples and visualization of latent fingerprints.

A sputum bioassay for airway eosinophilia using an eosinophil peroxidase aptamer

Eosinophils are granulocytes that play a significant role in the pathogenesis of asthma and other airway diseases. Directing patient treatment based on the level of eosinophilia has been shown to be extremely effective in reducing exacerbations and therefore has tremendous potential as a routine clinical test. Herein, we describe the in vitro selection and optimization of DNA aptamers that bind to eosinophil peroxidase (EPX), a protein biomarker unique to eosinophils. Fifteen rounds of magnetic bead aptamer selection were performed prior to high throughput DNA sequencing. The top 10 aptamer candidates were assessed for EPX binding using a mobility shift assay. This process identified a lead aptamer candidate termed EAP1-05 with low nanomolar affinity and high specificity for EPX over other common sputum proteins. This aptamer sequence was further optimized through truncation and used to develop an easy-to-use colourimetric pull-down assay that can detect EPX over a concentration range from 1 - 100 nM in processed sputum. Forty-six clinical samples were processed using a new sputum dispersal method, appropriate for a rapid assessment assay, that avoids centrifugation and lengthy processing times. The assay showed 89% sensitivity and 96% specificity to detect eosinophilia (compared to gold standard sputum cytometry), with results being produced in under an hour. This assay could allow for an easy assessment of eosinophil activity in the airway to guide anti-inflammatory therapy for several airway diseases.

Dual fluorescent aptasensor for simultanous and quantitative detection of sulfadimethoxine and oxytetracycin residues in animal-derived foods tissues based on mesoporous silica

Herein, we developed a dual fluorescent aptasensor based on mesoporous silica to simultaneously detect sulfadimethoxine (SDM) and oxytetracycline (OTC) in animal-derived foods. We immobilized two types of aptamers modified with FAM and CY5 on the silica surface by base complementary pairing reaction with the cDNA modified with a carboxyl group and finally formed the aptasensor detection platform. Under optimal conditions, the detection range of the aptasensor for SDM and OTC was 3-150 ng/mL (R ² = 0.9831) and 5-220 ng/mL (R ² = 0.9884), respectively. The limits of detection for SDM and OTC were 2.2 and 1.23 ng/mL, respectively. The limits of quantification for SDM and OTC were 7.3 and 4.1 ng/mL, respectively. Additionally, the aptasensor was used to analyze spiked samples. The average recovery rates ranged from 91.75 to 114.65% for SDM and 89.66 to 108.94% for OTC, and all coefficients of variation were below 15%. Finally, the performance and practicability of our aptasensor were confirmed by HPLC, demonstrating good consistency. In summary, this study was the first to use the mesoporous silica-mediated fluorescence aptasensor for simultaneous detection of SDM and OTC, offering a new possibility to analyze other antibiotics, biotoxins, and biomolecules.

Aptamer-based biosensors for Pseudomonas aeruginosa detection

Pseudomonas aeruginosa possesses innate antibiotic resistance mechanisms, and carbapenem-resistant Pseudomonas aeruginosa has been considered the number one priority in the 2017 WHO list of antimicrobial-resistant crucial hazards. Early detection of Pseudomonas aeruginosa can circumvent treatment challenges. Various techniques have been developed for the detection of P. aeruginosa detection. Biosensors have recently attracted unprecedented attention in the field of point-of-care diagnostics due to their easy operation, rapid, low cost, high sensitivity, and selectivity. Biosensors can convert the specific interaction between bioreceptors (antibodies, aptamers) and pathogens into optical, electrical, and other signal outputs. Aptamers are novel and promising alternatives to antibodies as biorecognition elements mainly synthesized by systematic evolution of ligands by exponential enrichment and have predictable secondary structures. They have comparable affinity and specificity for binding to their target to antibody recognition. Since 2015, there have been about 2000 journal articles published in the field of aptamer biosensors, of which 30 articles were on the detection of P. aeruginosa. Here, we have focused on outlining the recent progress in the field of aptamer-based biosensors for P. aeruginosa detection based on optical, electrochemical, and piezoelectric signal transduction methods.

Detection of Emerging Pollutants Using Aptamer-Based Biosensors: Recent Advances, Challenges, and Outlook

The synergistic potentialities of innovative materials that include aptamers have opened new paradigms in biosensing platforms for high-throughput monitoring systems. The available nucleobase functional moieties in aptamers offer exclusive features for bioanalytical sensing applications. In this context, compared to various in-practice biological recognition elements, the utilization of aptamers in detection platforms results in an extensive range of advantages in terms of design flexibility, stability, and sensitivity, among other attributes. Thus, the utilization of aptamers-based biosensing platforms is extensively anticipated to meet unaddressed challenges of various in-practice and standard analytical and sensing techniques. Furthermore, the superior characteristics of aptasensors have led to their applicability in the detection of harmful pollutants present in ever-increasing concentrations in different environmental matrices and water bodies, seeking to achieve simple and real-time monitoring. Considering the above-mentioned critiques and notable functional attributes of aptamers, herein, we reviewed aptamers as a fascinating interface to design, develop, and deploy a new generation of monitoring systems to aid modern bioanalytical sensing applications. Moreover, this review aims to summarize the most recent advances in the development and application of aptasensors for the detection of various emerging pollutants (EPs), e.g., pharmaceutical, and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), pesticides and other agricultural-related compounds, and toxic heavy elements. In addition, the limitations and current challenges are also reviewed, considering the technical constraints and complexity of the environmental samples.

Colorimetric assay for tetracyclines based on europium ion-induced aggregation of gold nanoparticles

Oxytetracycline-capped gold nanoparticles (OTC-Au NPs) were prepared using sodium borohydride as the reductant and OTC as the capping agent, respectively. The prepared OTC-Au NPs with a size of 6 nm have a maximum surface plasma resonance (SPR) absorption located at 514 nm. The OTC on the surface of Au NPs still can coordinate with Eu³⁺ ions. Due to the property that OTC has multivalent binding sites with Eu³⁺ ions, Eu³⁺ ions can induce the aggregation of OTC-Au NPs. Based on the Eu³⁺ ions-aggregated OTC-Au NPs, a simple aptamer-free colorimetric sensing method for TCs was developed. Briefly, free TCs compete with OTC on the surface of Au NPs resulting in the change of OTC-Au NPs from an aggregation state to a dispersed state. The whole process takes only 5 min, and as low as 20 nM OTC, 14 nM tetracycline (TC), and 20 nM doxycycline (DC) could be sensitively detected, respectively. The proposed method was also featured as good repeatability and specificity, and was applied to the detection of OTC in lake water with satisfactory recovery.

Microbial acoustic sensor test-system based on a piezoelectric resonator with a lateral electric field for kanamycin detection in liquid

A microbial test-system for real-time determination of low/residual concentrations of kanamycin in a liquid without the need for special labels is presented. The main element of the system was a piezoelectric resonator excited by a lateral electric field based on an X-cut lithium niobate plate 0.5 mm thick with two rectangular electrodes on one side. On the other side of the resonator, there was a 1.5 ml liquid container. As a sensory element we used Escherichia coli B-878 microbial cells, which are sensitive to kanamycin. For measurement 1 ml of this cells suspension was placed in a liquid container and then the test liquid in the amount of 2 μl containing kanamycin was added. The change in the real part of the electrical impedance of the resonator before and after the test liquid addition was used as an analytical signal which indicated the presence of kanamycin. The lower limit of determination of kanamycin turned out to be 1.0 μg/ml with an analysis time of 10 min. The test-system allows to detect kanamycin in the presence of such antibiotic as ampicillin and polymixin.

Aptamer-based diagnostic and therapeutic approaches in animals: Current potential and challenges

Fast and precise diagnosis of infectious and non-infectious animal diseases and their targeted treatments are of utmost importance for their clinical management. The existing biochemical, serological and molecular methods of disease diagnosis need improvement in their specificity, sensitivity and cost and, are generally not amenable for being used as points-of-care (POC) device. Further, with dramatic changes in environment and farm management practices, one should also arm ourselves and prepare for emerging and re-emerging animal diseases such as cancer, prion diseases, COVID-19, influenza etc. Aptamer – oligonucleotide or short peptides that can specifically bind to target molecules – have increasingly become popular in developing biosensors for sensitive detection of analytes, pathogens (bacteria, virus, fungus, prions), drug residues, toxins and, cancerous cells. They have also been proven successful in the cellular delivery of drugs and targeted therapy of infectious diseases and physiological disorders. However, the in vivo application of aptamer-mediated biosensing and therapy in animals has been limited. This paper reviews the existing reports on the application of aptamer-based biosensors and targeted therapy in animals. It also dissects the various modifications to aptamers that were found to be successful in in vivo application of the aptamers in diagnostics and therapeutics. Finally, it also highlights major challenges and future directions in the application of aptamers in the field of veterinary medicine.

Self-Powered Photoelectrochemical Aptasensor for Oxytetracycline Cathodic Detection Based on a Dual Z-Scheme WO3/g-C3N4/MnO2 Photoanode

With the high sensitivity and anti-interference provided by a dual Z-scheme structure photoanode and a two-electrode system, a high-performance self-powered photoelectrochemical (PEC) aptasensor for oxytetracycline (OTC) detection was established in this work. Graphitic carbon nitride (g-C₃N₄) with excellent photoelectric properties was used to be combined with WO₃ and MnO₂ to form a kind of dual Z-scheme heterojunction. The designed unique structure and the complementary performances of the three materials collectively guaranteed the highly stable photocurrent output of the photoanode due to the wide range of light absorption and the high separation rate of electron-hole pairs. The aptamer-based cathode modified with reduced graphene oxide (rGO) and Au nanoparticles (Au NPs) provided high conductivity and aptamer-binding sites, which brought excellent selective recognition of OTC as well as the self-powered capacity by receiving electrons from the photoanode. In the PEC sensing of OTC, the device presented a wide detection range from 1 pM to 150 nM and a low detection limit of 0.1 pM. Besides, the developed PEC aptasenor showed good selectivity, reproducibility, and stability, so as to be applied to real samples. The proposed PEC sensing method can be considered an effective and promising direction for the detection of antibiotics in the future.

Advances and perspectives of aptasensors for the detection of tetracyclines: A class of model compounds of food analysis

The residual tetracyclines in food are frequently applied as the model compounds to develop aptasensors. Until now, more than 100 advanced aptasensors towards tetracyclines have been developed and published in English. This review summarizes and discusses comprehensively these advanced aptasensors, in terms of the principle designs, applied frontier transducers/materials, working performance, and advantages/disadvantages. The aptasensors are classified according to the inherent transduction techniques, i.e., optics, optics-electricity, optics-mass, and electricity-mass. Moreover, the present challenges such as the limited specificity and limited affinity of the aptamers, the future prospects and trends such as further combination with other advanced materials and technologies, and the urgent need of expanding the practical application were discussed and prospected. We hope this review can serve as a powerful tool for both tracing the development progresses of aptasensors and providing adequate references for further development of aptasensing methods for food-related analytes.

Recent advances in aptamer-based sensors for aminoglycoside antibiotics detection and their applications

Aminoglycoside antibiotics (AAs) have been extensively applied in medical field and animal husbandry owing to desirable broad-spectrum antibacterial activity. Excessive AAs residues in the environment can be accumulated in human body through food chain and cause detrimental effect on human health. The establishment of highly specific, simple and sensitive detection methods for monitoring AAs residues is highly in demand. Aptasensor using aptamer as the biological recognition element is the efficient and promising sensing method for detection of AAs. In this review, we have made a summary of specific aptamers sequences against AAs. Subsequently, we provide a systematical and comprehensive overview of modern techniques in aptasensors for detection of AAs according to optical aptasensors as well as electrochemical aptasensors and further summarize their advantages and disadvantages to compare their applications. In addition, we present an overview of practical applications of aptasensors in sample detection of AAs. Moreover, the current challenges and future trends in this field are also included to reveal a promising perspective for developing novel aptasensors for AAs.

Advances in Gold Nanoparticles-Based Colorimetric Aptasensors for the Detection of Antibiotics: An Overview of the Past Decade

Misuse of antibiotics has recently been considered a global issue because of its harmful effects on human health. Since conventional methods have numerous limitations, it is necessary to develop fast, simple, sensitive, and reproducible methods for the detection of antibiotics. Among numerous recently developed methods, aptasensors are fascinating because of their good specificity, sensitivity and selectivity. These kinds of biosensors combining aptamer with colorimetric applications of gold nanoparticles to recognize small molecules are becoming more popular owing to their advantageous features, for example, low cost, ease of use, on-site analysis ability using naked eye and no prerequisite for modern equipment. In this review, we have highlighted the recent advances and working principle of gold nanoparticles based colorimetric aptasensors as promising methods for antibiotics detection in different food and environmental samples (2011–2020). Furthermore, possible advantages and disadvantages have also been summarized for these methods. Finally, the recent challenges, outlook, and promising future perspectives for developing novel aptasensors are also considered.

Colorimetric aptasensor for on-site detection of oxytetracycline antibiotic in milk

Oxytetracycline (OTC), one of the largely used antibiotic in veterinary practice has been banned due to its potential side effects. Development of a field applicable and affordable kit to detect OTC will help to eliminate such milk from human consumption. An aptamer has been designed (27 nt; K_d = 29.2 ± 19.4 nM) through rational truncation. OTC interacts with this aptamer in G rich regions as confirmed by molecular modelling and circular dichroism spectroscopy. To develop a lateral flow based aptasensor, OTC was conjugated with a 7 kDa carrier protein to immobilize onto the nitrocellulose membrane. Using 0.125 µM aptamer-gold conjugate, assay could visually detects upto 5 ng/mL of OTC in spiked milk within 10 mins [Limit of quantitation (LOQ)-0.254 ± 1.62 ng/mL; permissible limit 100 ng/mL]. It showed no cross reactivity with components of milk and data correlated with analysis done through HPLC.

Colorimetric Detection of Kanamycin Residue in Foods Based on the Aptamer-Enhanced Peroxidase-Mimicking Activity of Layered WS2 Nanosheets

Although the colorimetric methods can easily meet the demands of point-of-care and ease-of-use for antibiotic detection, they still face many challenges in the accuracy and stability of assay. Herein, a facile and stable colorimetric aptasensor is first developed for kanamycin residue detection based on the aptamer-enhanced peroxidase-mimicking activity of layered WS₂ nanosheets. The investigation confirmed that aptamer sequences can improve the affinity of nanosheets to the chromogenic substrate 3,3'',5,5''-tetramethylbenzidine, resulting in a significant increase of the peroxidase-mimicking activity. Under the optimal conditions, the limit of detection of the proposed colorimetric aptasensor for kanamycin was determined to be as low as 0.6 μM, and such an aptasensor displays excellent selectivity against other competitive antibiotics. Moreover, further studies have verified the applicability of the established colorimetric aptasensor in several actual samples, indicating that the aptasensor may have bright application prospects for kanamycin detection in livestock husbandry and agriculture samples.

A signal-on fluorescent aptasensor based on gold nanoparticles for kanamycin detection

This study describes the development, verification and practical application of an aptasensor for the fluorometric detection of kanamycin. Using the nucleic acid aptamer with FAM fluorescent group as the conjugate, using gold nanoparticles as the fluorescence dynamic quenching source, a fluorescence sensor was fabricated through the signal-on method for the micro-detection of kanamycin. The nucleic acid chimera is connected to the fluorophore, and the gold nanoparticles are used as the fluorescence dynamic quenching source under actual conditions. The detection limit of kanamycin is 0.1 pM, and the detection range is 0.1 pM to 0.1 μM. This biosensor works satisfactorily in complex samples with no impurities, which gives this method an obvious advantage over other analytical methods. In addition, the mechanism of action between gold nanoparticles/FAM-aptamer/kanamycin is discussed and studied in depth here. It provides a more thorough analysis and more application possibilities for fluorescence-aptamer biosensing.

A label-free electrochemical assay for coronavirus IBV H120 strain quantification based on equivalent substitution effect and AuNPs-assisted signal amplification

A label-free electrochemical strategy is proposed combining equivalent substitution effect with AuNPs-assisted signal amplification. According to the differences of S1 protein in various infectious bronchitis virus (IBV) strains, a target DNA sequence that can specifically recognize H120 RNA forming a DNA-RNA hybridized double-strand structure has been designed. Then, the residual single-stranded target DNA is hydrolyzed by S1 nuclease. Therefore, the content of target DNA becomes equal to the content of virus RNA. After equivalent coronavirus, the target DNA is separated from DNA-RNA hybridized double strand by heating, which can partly hybridize with probe 2 modified on the electrode surface and probe 1 on AuNPs’ surface. Thus, AuNPs are pulled to the surface of the electrode and the abundant DNA on AuNPs’ surface could adsorb a large amount of hexaammineruthenium (III) chloride (RuHex) molecules, which produce a remarkably amplified electrochemical response. The voltammetric signal of RuHex with a peak near − 0.28 V vs. Ag/AgCl is used as the signal output. The proposed method shows a detection range of 1.56e⁻⁹ to 1.56e⁻⁶ μM with the detection limit of 2.96e⁻¹⁰ μM for IBV H120 strain selective quantification detection, exhibiting good accuracy, stability, and simplicity, which shows a great potential for IBV detection in vaccine research and avian infectious bronchitis diagnosis.

Recent Advances in Optical Detection of Aminoglycosides

Aminoglycosides (AGs) are broad-spectrum antibiotics used in both human infection and animal medicine. The overuse of AGs causes undesirable residues in food, leading to serious health problems due to food chain accumulation. In recent years, various methods have been developed to determine AGs in food. Among these methods, fluorescent (FL), colorimetric and chemiluminescent (CL) optical methods possess advantages such as their simple instrumentation, low cost, simple operation, feasibility of realizing visualization, and smartphone imaging. This mini-review summarizes optical assays for the detection of AGs in food developed in recent years. The detection principles for different categories are discussed. Then, the amplification techniques for the ultrasensitive detection of AGs are introduced. We also discuss multiplex methods for the simultaneous detection of AGs. Finally, the challenges and future prospects are discussed in the Conclusions and Perspectives section.

Chiral Interaction Is a Decisive Factor To Replace d-DNA with l-DNA Aptamers

Nucleic acid aptamers have been widely used in various fields such as biosensing, DNA chip, and medical diagnosis. However, the high susceptibility of nucleic acids to ubiquitous nucleases reduces the biostability of aptamers and limits their applications in biological contexts. Therefore, improving the biostability of aptamers becomes an urgent need. Herein, we present a simple strategy to resolve this problem by directly replacing the d-DNA-based aptamers with left-handed l-DNA. By testing several reported aptamers against respective targets, we found that our proposed strategy stood up well for nonchiral small molecule targets (e.g., Hemin and cationic porphyrin) and chiral targets whose interactions with aptamers are chirality-independent (e.g., ATP). We also found that the l-DNA aptamers were indeed endowed with greatly improved biostability due to the extraordinary resistance of l-DNA to nuclease digestion. With respect to other small-molecule targets whose interactions with aptamers are chirality-dependent (e.g., kanamycin) and biomacromolecules (e.g., tyrosine kinase-7), however, the proposed strategy was not entirely effective likely due to the participation of the DNA backbone chirality into the target recognition. In spite of this limitation, this strategy indeed paves an easy way to screen highly biostable aptamers important for the applications in many fields.

The Growing Interest in Development of Innovative Optical Aptasensors for the Detection of Antimicrobial Residues in Food Products

The presence of antimicrobial residues in food-producing animals can lead to harmful effects on the consumer (e.g., allergies, antimicrobial resistance, toxicological effects) and cause issues in food transformation (i.e., cheese, yogurts production). Therefore, to control antimicrobial residues in food products of animal origin, screening methods are of utmost importance. Microbiological and immunological methods (e.g., ELISA, dipsticks) are conventional screening methods. Biosensors are an innovative solution for the development of more performant screening methods. Among the different kinds of biosensing elements (e.g., antibodies, aptamers, molecularly imprinted polymers (MIP), enzymes), aptamers for targeting antimicrobial residues are in continuous development since 2000. Therefore, this review has highlighted recent advances in the development of aptasensors, which present multiple advantages over immunosensors. Most of the aptasensors described in the literature for the detection of antimicrobial residues in animal-derived food products are either optical or electrochemical sensors. In this review, I have focused on optical aptasensors and showed how nanotechnologies (nanomaterials, micro/nanofluidics, and signal amplification techniques) largely contribute to the improvement of their performance (sensitivity, specificity, miniaturization, portability). Finally, I have explored different techniques to develop multiplex screening methods. Multiplex screening methods are necessary for the wide spectrum detection of antimicrobials authorized for animal treatment (i.e., having maximum residue limits).

Electrochemical Immunosensors for Antibiotic Detection

Antibiotics are an important class of drugs destined for treatment of bacterial diseases. Misuses and overuses of antibiotics observed over the last decade have led to global problems of bacterial resistance against antibiotics (ABR). One of the crucial actions taken towards limiting the spread of antibiotics and controlling this dangerous phenomenon is the sensitive and accurate determination of antibiotics residues in body fluids, food products, and animals, as well as monitoring their presence in the environment. Immunosensors, a group of biosensors, can be considered an attractive tool because of their simplicity, rapid action, low-cost analysis, and especially, the unique selectivity arising from harnessing the antigen-antibody interaction that is the basis of immunosensor functioning. Herein, we present the recent achievements in the field of electrochemical immunosensors designed to determination of antibiotics.