Rapid synthesis of a highly active and uniform 3-dimensional SERS substrate for on-spot sensing of dopamine

A SERS Composite Hydrogel Device for Point-of-Care Analysis of Neurotransmitter in Whole Blood

Point-of-care analysis of neurotransmitters in body fluids plays a significant role in healthcare improvement. Conventional approaches are limited by time-consuming procedures and usually require laboratory instruments for sample preparation. Herein, we developed a surface enhanced Raman spectroscopy (SERS) composite hydrogel device for the rapid analysis of neurotransmitters in whole blood samples. The PEGDA/SA composite hydrogel enabled fast separation of small molecules from the complex blood matrix, while the plasmonic SERS substrate allowed for the sensitive detection of target molecules. 3D printing was employed to integrate the hydrogel membrane and the SERS substrate into a systematic device. The sensor achieved highly sensitive detection of dopamine in whole blood samples with a limit of detection down to 1 nM. The whole detection process from sample preparation to SERS readout can be finished within 5 min. Due to the simple operation and rapid response, the device shows great potential in point-of-care diagnosis and the monitoring of neurological and cardiovascular diseases and disorders.

Recent Progress on Solid Substrates for Surface-Enhanced Raman Spectroscopy Analysis

Surface-enhanced Raman spectroscopy (SERS) is a powerful vibrational spectroscopy technique with distinguished features of non-destructivity, ultra-sensitivity, rapidity, and fingerprint characteristics for analysis and sensors. The SERS signals are mainly dependent on the engineering of high-quality substrates. Recently, solid SERS substrates with diverse forms have been attracting increasing attention due to their promising features, including dense hot spot, high stability, controllable morphology, and convenient portability. Here, we comprehensively review the recent advances made in the field of solid SERS substrates, including their common fabrication methods, basic categories, main features, and representative applications, respectively. Firstly, the main categories of solid SERS substrates, mainly including membrane substrate, self-assembled substrate, chip substrate, magnetic solid substrate, and other solid substrate, are introduced in detail, as well as corresponding construction strategies and main features. Secondly, the typical applications of solid SERS substrates in bio-analysis, food safety analysis, environment analysis, and other analyses are briefly reviewed. Finally, the challenges and perspectives of solid SERS substrates, including analytical performance improvement and largescale production level enhancement, are proposed.

SERS determination of dopamine using metal-organic frameworks decorated with Ag/Au noble metal nanoparticle composite after azo derivatization with p-aminothiophenol

A specific surface-enhanced Raman scattering (SERS) assay for dopamine (DA) based on an azo derivatization reaction is proposed for the first time by preparation of p-aminothiophenol (PATP)-modified composite SERS substrate, composed of metal-organic framework (MIL-101) decorated with Au and Ag nanoparticles. As the result, the SERS method for detection of the azo reaction between PATP and DA exhibits superior sensitivity, selectivity, and stability. A reasonable linearity in the range 10^-6 to 10^-10 mol∙L^-1 is achieved, and the limit of detection is 1.2 × 10^-12 mol∙L^-1. The reactive SERS assay is free from interference in complex physiological fluid. The feasibility of the proposed SERS method for the detection of DA levels in fetal bovine serum (FBS) samples and human serum samples is validated by HPLC-MS methods, displaying promising application potential in early disease diagnosis.

Facial Fabrication of Large-Scale SERS-Active Substrate Based on Self-Assembled Monolayer of Silver Nanoparticles on CTAB-Modified Silicon for Analytical Applications

Surface-enhanced Raman spectroscopy (SERS) has been proven to be a promising analytical technique with sensitivity at the single-molecule level. However, one of the key problems preventing its real-world application lies in the great challenges that are encountered in the preparation of large-scale, reproducible, and highly sensitive SERS-active substrates. In this work, a new strategy is developed to fabricate an Ag collide SERS substrate by using cetyltrimethylammonium bromide (CTAB) as a connection agent. The developed SERS substrate can be developed on a large scale and is highly efficient, and it has high-density “hot spots” that enhance the yield enormously. We employed 4-methylbenzenethiol(4-MBT) as the SERS probe due to the strong Ag–S linkage. The SERS enhancement factor (EF) was calculated to be ~2.6 × 10⁶. The efficacy of the proposed substrate is demonstrated for the detection of malachite green (MG) as an example. The limit of detection (LOD) for the MG assay is brought down to 1.0 × 10⁻¹¹ M, and the relative standard deviation (RSD) for the intensity of the main Raman vibration modes (1620, 1038 cm⁻¹) is less than 20%.

A digital SERS sensing platform using 3D nanolaminate plasmonic crystals coupled with Au nanoparticles for accurate quantitative detection of dopamine

We report a digital surface-enhanced Raman spectroscopy (SERS) sensing platform using the arrays of 3D nanolaminate plasmonic crystals (NLPC) coupled with Au nanoparticles and digital (on/off) SERS signal analysis for the accurate quantitative detection of dopamine (DA) at ultralow concentrations. 3D NLPC SERS substrates were fabricated to support the optically dense arrays of vertically-stacked multi-nanogap hotspots and combined with Raman tag-conjugated Au nanoparticles for NLPC-based dual-recognition structures. We demonstrate that the 3D NLPC-based dual-recognition structures including Au nanoparticle-induced additional hotspots can enable more effective SERS enhancement through the molecular recognition of DA. For the accurate quantification of DA at ultralow concentrations, we conducted digital SERS analysis to reduce stochastic signal variation due to various microscopic effects, including molecular orientation/position variation and the spatial distribution of nanoparticle-coupled hotspots. The digital SERS analysis allowed the SERS mapping results from the DA-specific dual-recognition structures to be converted into binary "On/Off" states; the number of "On" events was directly correlated with low-abundance DA molecules down to 1 pM. Therefore, the digital SERS platform using the 3D NLPC-based dual-recognition structures coupled with Au nanoparticles and digital SERS signal analysis can be used not only for the ultrasensitive, accurate, and quantitative determination of DA, but also for the practical and rapid analysis of various molecules on nanostructured surfaces.

Facile Fabrication of a Functional Filter Tip for Highly Efficient Reduction of Nicotine Content in Mainstream Smoke

The nicotine addiction problem is of great concern, particularly in adolescents. Notably, nicotine addiction drives humans to continue smoking. Notably, several diseases and disorders are caused by smoking. To date, various adsorbents have been proposed to develop a functionalization filter tip for reducing nicotine content in mainstream smoke. However, the nicotine adsorption efficiencies of most of the reported functionalization filter tips were not satisfactory, and their preparation process was complex and time-consuming. Herein, we demonstrate a highly active and adsorbing filter tip for cigarettes, fabricated by decorating polydopamine (PDA) on the surface of a commercial filter tip in situ. The PDA coating on the filter tip was obtained by the self-polymerization of dopamine (DA) within 16 h, which was quicker and easier than the preparation processes of other reported functionalized filter tips. Significantly, the PDA-decorated filter tip had a nicotine adsorption efficiency as high as ∼95%, which was much higher than most of the commercial filter tips.

An overview of nanomaterial based biosensors for detection of Aflatoxin B1 toxicity in foods

Aflatoxin B1 (AFB1) is one of the most potent mycotoxin contaminating several foods and feeds. It suppresses immunity and consequently increases mutagenicity, carcinogenicity, teratogenicity, hepatotoxicity, embryonic toxicity and increasing morbidity and mortality. Continuous exposure of AFB1 causes liver damage and thus increases the prevalence of cirrhosis and hepatic cancer. This article was planned to provide understanding of AFB1 toxicity and provides future directions for fabrication of cost effective and user-friendly nanomaterials based analytical devices. In the present article various conventional (chromatographic & spectroscopic), modern (PCR & immunoassays) and nanomaterials based biosensing techniques (electrochemical, optical, piezoelectrical and microfluidic) are discussed alongwith their merits and demerits. Nanomaterials based amperometric biosensors are found to be more stable, selective and cost-effective analytical devices in comparison to other biosensors. But many unresolved issues about their stability, toxicity and metabolic fate needs further studies. In-depth studies are needed for development of advanced nanomaterials integrated biosensors for specific, sensitive and fast monitoring of AFB1 toxicity in foods. Integration of biosensing system with micro array technology for simultaneous and automated detection of multiple AFs in real samples is also needed. Concerted efforts are also required to reduce their possible hazardous consequences of nanomaterials based biosensors.

Dopamine and Melamine Binding to Gold Nanoparticles Dominates Their Aptamer-Based Label-Free Colorimetric Sensing

Target-directed aptamer adsorption by gold nanoparticles (AuNPs) has been widely used to develop label-free colorimetric biosensors. However, the potential interactions between target molecules and AuNPs have not been considered, which may lead to misinterpretation of analytical results. In this work, the detection of dopamine, melamine, and K⁺ was studied as model systems to address this problem. First, dopamine and two control molecules all induced the aggregation of citrate-capped AuNPs with apparent K_d's of 5.8 μM dopamine, 51.6 μM norepinephrine, and 142 μM tyramine. Isothermal titration calorimetry measured the aptamer K_d to be 1.9 μM dopamine and 16.8 μM norepinephrine, whereas tyramine cannot bind. Surface enhanced Raman spectroscopy confirmed direct adsorption of dopamine, and the adsorbed dopamine inhibited the adsorption of DNA. Using a typical salt-induced colorimetric detection protocol, a similar color response was observed regardless of the sequence of DNA, indicating the observed color change reflected the adsorption of dopamine by the AuNPs instead of the binding of dopamine by the aptamer. For this label-free sensor to work, the interaction between the target molecule and AuNPs should be very weak, while dopamine represents an example of strong interactions. For the other two systems, the melamine detection did not reflect aptamer binding either but the K⁺ detection did, suggesting melamine also strongly interacted with AuNPs, whereas K⁺ had very weak interactions with AuNPs. Since each target molecule is different, such target/AuNP interactions need to be studied case-by-case to ensure the sensing mechanism.

Core-satellite assemblies and exonuclease assisted double amplification strategy for ultrasensitive SERS detection of biotoxin

In this work, core-satellite assemblies and exonuclease assisted double amplification strategy is developed to produce surface-enhanced Raman scattering (SERS) biosensor towards ultrasensitive detection of biotoxin. In the presence of target molecules, the exonuclease III (Exo III) assisted efficient recycling amplification provides an excellent pathway for the fabrication of core-satellite SERS sensor. Briefly, the proposed strategy includes the following double amplifications: (i) Exo III induced target-related signal amplification; (ii) core-satellite assemblies assisted formation of SERS "hot-spots" induced signal amplification. To show the applicability of the suggested strategy, the detection of ochratoxin A (OTA), one of the most toxic and widely distributed biotoxin, is demonstrated as an example. The results show that the limit of detection (LOD) of OTA is 0.83 fg mL^-1 (S/N = 3). On the basis of the DNA aptamer induced specific target recognition, hence our sensing strategy is easy to be expended to the ultrasensitive detection of other targets, e.g., DNAs, RNAs, and other molecules that have corresponding DNA aptamers.

A Facile Approach for On-Site Evaluation of Nicotine in Tobacco and Environmental Tobacco Smoke

Nicotine is highly addictive and harmful. It is one of the main active ingredients in tobacco and a major pollutant in environmental tobacco smoke. Thus, it is important to detect the nicotine content in tobacco and to monitor the nicotine content in environmental tobacco smoke. However, until present, there still has been no effective device for on-site determination of nicotine content in tobacco and environmental tobacco smoke. In this work, a portable device is fabricated for sensitive on-site evaluation of nicotine in tobacco and environmental tobacco smoke based on surface-enhanced Raman scattering (SERS). The weight of the entire device is less than 1 kg, and it uses a chargeable battery to drive both the pump and the Raman spectrometer. The total analysis time can be completed within 3-5 min. Thus, it has great potential for on-site analysis of nicotine in tobacco and environmental tobacco smoke.