Graphene oxide-based fluorometric determination of microRNA-141 using rolling circle amplification and exonuclease III-aided recycling amplification

Dual-probe ligation without PCR for fluorescent sandwich assay of EGFR nucleotide variants in magnetic gene capture platform

A simple, rapid, and highly efficient fluorescent detection technique without PCR through dual-probe ligation with the genetic capture of magnetic beads and reported probe was developed for determination of epidermal growth factor receptor (EGFR) gene exon 19 deletions. The EGFR exon 19 deletion mutation makes up 48% of all mutations associated with anti-tyrosine kinase inhibition sensitivity, and thus, the EGFR nucleotide variant is very important in clinical diagnosis. In this approach, the dual-probe ligation was designed to target exon 19 deletion. The magnetic genetic captured system was then applied to capture the successful dual-probe ligation. Thereafter, a reporter probe which is coupled with 6-fluorescein amidite (6-FAM) was introduced to hybridize with dual-probe ligation product on the surface of streptavidin magnetic beads, and finally, the supernatant was taken for fluorescence measurements for distinguishing mutant types from wild types. After optimization (the RSD of the fluorescent intensity was less than 4.5% (n = 3) under the optimal condition), 20 blind DNA samples from the population were analyzed by this technique and further confirmed by direct sequencing. The results of our assay matched to those from direct sequencing data, evidencing that the developed method is accurate and successful. These 20 blind DNA samples were diagnosed as wild and then spiked with different percentages of the mutant gene to quantify the ratio of the wild and mutant genes. This strategy was also successfully applied to quantify the ratio of the wild and mutant genes with good linearity at the λex/λem of 480 nm/520 nm (r = 0.996), and the limit of detection reached 1.0% mutant type. This simple fluorescent detection of nucleotide variants shows its potential to be considered a tool in biological and clinical diagnosis. Importantly, this strategy offers a universal detection capability for any kind of mutation (point, deletion, insertion, or substitution) in a gene of interest.

Recent advances in cascade isothermal amplification techniques for ultra-sensitive nucleic acid detection

Nucleic acid amplification techniques have always been one of the hot spots of research, especially in the outbreak of COVID-19. From the initial polymerase chain reaction (PCR) to the current popular isothermal amplification, each new amplification techniques provides new ideas and methods for nucleic acid detection. However, limited by thermostable DNA polymerase and expensive thermal cycler, PCR is difficult to achieve point of care testing (POCT). Although isothermal amplification techniques overcome the defects of temperature control, single isothermal amplification is also limited by false positives, nucleic acid sequence compatibility, and signal amplification capability to some extent. Fortunately, efforts to integrating different enzymes or amplification techniques that enable to achieve intercatalyst communication and cascaded biotransformations may overcome the corner of single isothermal amplification. In this review, we systematically summarized the design fundamentals, signal generation, evolution, and application of cascade amplification. More importantly, the challenges and trends of cascade amplification were discussed in depth.

Interference Reduction Biosensing Strategy for Highly Sensitive microRNA Detection

MicroRNAs are potential biomarkers for human cancers and other diseases due to their roles as post-transcriptional regulators for gene expression. However, the detection of miRNAs by conventional methods such as RT-qPCR, in situ hybridization, northern blot-based platforms, and next-generation sequencing is complicated by short length, low abundance, high sequence homology, and susceptibility to degradation of miRNAs. In this study, we developed a nicking endonuclease-mediated interference reduction rolling circle amplification (NEM-IR-RCA) strategy for the ultrasensitive and highly specific detection of miRNA-21. This method exploits the advantages of the optical properties of long-lived iridium(III) probes, in conjunction with time-resolved emission spectroscopy (TRES) and exponential rolling circle amplification (E-RCA). Under the NEM-IR-RCA-based signal enhancement processes, the limit of detection of miRNA-21 was down to 0.0095 fM with a linear range from 0.05 to 100 fM, which is comparable with the conventional RT-qPCR. Unlike RT-qPCR, the strategy was performed at a lower and constant temperature without heating/cooling cycles and reverse transcription. The strategy could clearly discriminate between matched and mismatched targets, demonstrating high specificity. Moreover, the potential application of this method was demonstrated in cancer cells and mouse serum samples, showing good agreement with RT-qPCR results. Apart from miRNA-21 detection, this platform could be also adapted for detecting other miRNAs, such as let-7a and miRNA-22, indicating its excellent potential for biomedical research and clinical diagnostics.

Recent advances of fluorescent biosensors based on cyclic signal amplification technology in biomedical detection

The cyclic signal amplification technology has been widely applied for the ultrasensitive detection of many important biomolecules, such as nucleic acids, proteins, enzymes, adenosine triphosphate (ATP), metal ions, exosome, etc. Due to their low content in the complex biological samples, traditional detection methods are insufficient to satisfy the requirements for monitoring those biomolecules. Therefore, effective and sensitive biosensors based on cyclic signal amplification technology are of great significance for the quick and simple diagnosis and treatment of diseases. Fluorescent biosensor based on cyclic signal amplification technology has become a research hotspot due to its simple operation, low cost, short time, high sensitivity and high specificity. This paper introduces several cyclic amplification methods, such as rolling circle amplification (RCA), strand displacement reactions (SDR) and enzyme-assisted amplification (EAA), and summarizes the research progress of using this technology in the detection of different biomolecules in recent years, in order to provide help for the research of more efficient and sensitive detection methods.

An ultrasensitive and specific electrochemical biosensor for DNA detection based on T7 exonuclease-assisted regulatory strand displacement amplification

An electrochemical biosensor for determination of DNA is developed based on T7 exonuclease-assisted regulatory strand displacement dual recycling signal amplification strategy. First, the hairpin probe recognized and bound the target DNA to form a double strand nucleotide structure, and then the T7 exonuclease was introduced. After be digested by T7 exonuclease, the target DNA was released and entered the next cycle of T7 exonuclease-assisted recycle amplification, while accompanied by a large number of mimic targets (output DNAs) into another cycle. Second, the mimic target reacted with double-chain substrated DNA (CP) by a regulated toehold exchange mechanism, yielding the product complex of detection probes with the help of assisted DNA (S). Finally, after many cycles, a large number of detection probes were produced for binding numerous streptavidin-alkaline phosphatases. The electrochemical biosensor showed very high sensitivity and selectivity with a dynamic response ranged from 0.1 fM to 10 pM with a detection limit of 31.6 aM. Furthermore, this proposed biosensor was successfully applied to the detection of target DNA in 20% diluted serum. The developed strategy has been demonstrated to have the potential for application in molecular diagnostics.

Optimization of N-hydroxysuccinimide ester coupling with aminoallyl-modified RNA for fluorescent labeling

Site-specific fluorescent labeling of RNA is crucial for obtaining the structural and dynamic information of RNAs by fluorescence techniques. Post-synthetic modification of RNA based on N-hydroxysuccinimide (NHS) coupling reaction is an economic, efficient and simple strategy to introduce fluorophore to samples. However, this strategy are not that frequently used in RNA molecules, and the reported reaction conditions and yields varied among different systems. This study results mainly focused on screening the reaction conditions (reactants concentrations, dimethylsulfoxide concentration, solution conditions, pH and reaction time) between NHS-linked fluorophore and aminoallyl-RNA (aa-RNA) to optimize the yield of fluorescent RNA up to 55%, doubled the initial yield. What's more, as low as one tenth of fluorescent reagent was used in our protocol compared with the reported protocols, greatly reducing the experimental cost. The protocol can be applied as a general guide potentially for RNA labeling by NHS-ester coupling reaction.

Label-Free Homogeneous microRNA Detection in Cell Culture Medium Based on Graphene Oxide and Specific Fluorescence Quenching

Label-free homogeneous optical detection of low concentration of oligonucleotides using graphene oxide in complex solutions containing proteins remains difficult. We used a colloidal graphene oxide (GO) as a fluorescent probe quencher to detect microRNA-21 spiked-in cell culture medium, overcoming previously reported problematic aspects of protein interference with graphene oxide. We used a "turn off" assay for specific quenching-based detection of oligo DNA-microRNA hybridization in solution. A fluorescein conjugated 30-mer single-stranded DNA (ssDNA) probe was combined with a complementary synthetic microRNA (18 nucleotides) target. The probe-target hybridization was detected by specific quenching due to photoinduced electron transfer (PET). On the next step, GO captures and quenches the unhybridized probe by fluorescence resonance energy transfer (FRET) in the presence of cell culture medium supplemented with platelet lysate, 0.1% sodium dodecyl sulfate (SDS), 0.1% Triton X-100 and 50% formamide. This resulted in sensitive measurement of the specific probe-target complexes remaining in solution. The detection is linear in the range of 1 nM and 8 nM in a single 100 μL total volume assay sample containing 25% cell culture medium supplemented with platelet lysate. We highlight a general approach that may be adopted for microRNA target detection within complex physiological media.

Sensitive detection of RNA based on concatenated self-fuelled strand displacement amplification and hairpin-AgNCs

Herein, a self-fuelled amplification strategy (SFAS) is proposed, in which two strand displacement amplification (SDA) processes were concatenated for the proliferation of ssDNA. The ssDNA then initiated a polymerase action and caused the destruction of hairpin-templated silver nanoclusters (AgNCs), resulting in decreased fluorescence for sensing miRNA-21. This SFAS-based sensor is less complicated in design and facile in operation, because of the easy concatenation of SDA and mutual enzymes used in the signal output process. The sensitivity of this SFAS-based miRNA sensor was 1.78 × 10^-11 M with a linear relationship in the range 0.02-1.0 × 10^-9 M, and the recoveries of this method ranged from 82.07% to 106.58% with an average RSD of 10.96%.

Rolling circle amplification promoted magneto-controlled photoelectrochemical biosensor for organophosphorus pesticides based on dissolution of core-shell MnO2 nanoflower@CdS mediated by butyrylcholinesterase

A photoelectrochemical (PEC) aptasensing platform is devised for sensitive detection of an organophosphorus pesticide based on dissolution of core-shell MnO₂ nanoflower@CdS (MnO₂ NF@CdS) by thiocholine (TCh). TCH is produced from the butyrylcholinesterase-acetylthiocholine system, accompanied by target-triggered rolling circle amplification (RCA). The core-shell MnO₂ NF@CdS with excellent PEC performance was synthesized and employed as a photo-sensing platform. The target was detected on a functionalized magnetic probe with the corresponding aptamer. Upon malathion introduction, the aptamer was detached from the magnetic beads, while capture DNA (cDNA, with primer fragment) remained on the beads. The primer fragment in cDNA can trigger the RCA reaction to form a long single-stranded DNA (ssDNA). Furthermore, a large number of butyrylcholinesterase (BChE) were assembled on the long ssDNA strands through the hybridization with the S₂-Au-BChE probe. Thereafter, TCh generated from hydrolysis of ATCh by BChE can reduce MnO₂ NF (core) to Mn²⁺ and release the CdS nanoparticles (shell) from the platform electrode, significantly enhancing the PEC signal. Under optimal conditions, the proposed aptasensor exhibited high sensitivity for malathion with a low detection limit of 0.68 pg mL^-1. Meanwhile, it also presents outstanding specificity, reproducibility, and stability. Importantly, the sensing platform provides a new concept for detection of pesticide. Graphical abstract Herein, this work devised a photoelectrochemical (PEC) aptasensing platform for sensitive detection of organophosphorus pesticide based on dissolution of core-shell MnO₂ nanoflower@CdS (MnO₂ NF@CdS) by the as-produced thiocholine (TCh) from the butyrylcholinesterase-acetylthiocholine system, accompanying with the target-triggered rolling circle amplification (RCA).

Calcium ion assisted fluorescence determination of microRNA-167 using carbon dots-labeled probe DNA and polydopamine-coated Fe3O4 nanoparticles

A selective and sensitive fluorescence biosensor is described for determination of microRNA-167 using fluorescent resonant energy transfer (FRET) strategy. The FRET system comprises carbon dots (CDs, donor) labeled with probe DNA (pDNA) and polydopamine (PDA)-coated Fe₃O₄ nanoparticles (Fe₃O₄@PDA NPs, acceptor). The CDs-pDNA can be absorbed onto the surface of Fe₃O₄@PDA NPs because of the strong π interaction between pDNA and PDA. With the enhanced adsorption ability of Fe₃O₄@PDA NPs by Ca²⁺, the fluorescence intensity of CDs at 445 nm (excitation at 360 nm) is quenched. In presence of microRNA-167, the hybridized complex of CDs-pDNA-microRNA-167 will be released from the surface of Fe₃O₄@PDA NPs due to the weak π interaction of the complex and PDA. This results in the fluorescence recovery of CDs. By application of twice-magnetic separation, the biosensor shows a wide linear range of 0.5-100 nM to microRNA-167 with a 76 pM detection limit. The method was applied to the determination of microRNA-167 in samples of total microRNA extractions from A. thaliana seedlings, and the recoveries ranged from 96.4 to 98.3%.

A review on recent advancements in electrochemical biosensing using carbonaceous nanomaterials

This review, with 201 references, describes the recent advancement in the application of carbonaceous nanomaterials as highly conductive platforms in electrochemical biosensing. The electrochemical biosensing is described in introduction by classifying biosensors into catalytic-based and affinity-based biosensors and statistically demonstrates the most recent published works in each category. The introduction is followed by sections on electrochemical biosensors configurations and common carbonaceous nanomaterials applied in electrochemical biosensing, including graphene and its derivatives, carbon nanotubes, mesoporous carbon, carbon nanofibers and carbon nanospheres. In the following sections, carbonaceous catalytic-based and affinity-based biosensors are discussed in detail. In the category of catalytic-based biosensors, a comparison between enzymatic biosensors and non-enzymatic electrochemical sensors is carried out. Regarding the affinity-based biosensors, scholarly articles related to biological elements such as antibodies, deoxyribonucleic acids (DNAs) and aptamers are discussed in separate sections. The last section discusses recent advancements in carbonaceous screen-printed electrodes as a growing field in electrochemical biosensing. Tables are presented that give an overview on the diversity of analytes, type of materials and the sensors performance. Ultimately, general considerations, challenges and future perspectives in this field of science are discussed. Recent findings suggest that interests towards 2D nanostructured electrodes based on graphene and its derivatives are still growing in the field of electrochemical biosensing. That is because of their exceptional electrical conductivity, active surface area and more convenient production methods compared to carbon nanotubes. Graphical abstract Schematic representation of carbonaceous nanomaterials used in electrochemical biosensing. The content is classified into non-enzymatic sensors and affinity/ catalytic biosensors. Recent publications are tabulated and compared, considering materials, target, limit of detection and linear range of detection.

Fluorometric determination of microRNA using arched probe-mediated isothermal exponential amplification combined with DNA-templated silver nanoclusters

A highly sensitive fluorometric method is described for the determination of microRNA-141. It is based on the use of arched probe-mediated isothermal exponential amplification reaction (EXPAR) and of DNA-templated silver nanoclusters (DNA-AgNCs). The EXPAR utilizes microRNA-141 as the trigger, polymerases and endonucleases as amplification activators, and two arched probes as exponential amplification templates. This enables the conversion of microRNA to a large number of reporter sequences under isothermal conditions within minutes. The generated reporter sequences act as scaffolds for the synthesis of fluorescent DNA-AgNCs by reduction of Ag (I) with NaBH₄. The DNA-AgNCs function as signalling fluorophores with excitation/emission maxima at 540/610 nm. The method exhibits high sensitivity for microRNA-141 with a detection limit as low as 0.87 fM and a dynamic range from 1 fM to 500 fM. The method can distinguish nucleotides in the microRNA-200 family. Graphical abstract Schematic representation of a fluorometric method for sensitive detection of microRNA based on arched probe-mediated isothermal exponential amplification combined with DNA-templated silver nanoclusters.

Well-Optimized Conjugated GO-DNA Nanosystem for Sensitive Ratiometric pH Detection in Live Cells

Intracellular pH is a vital parameter which can reflect the physiological process, and the detection of intracellular pH with a high signal-to-noise ratio (SNR) remains a challenge. Compared to pH biosensors based on a single-wavelength signal, it is much easier to obtain better sensitivity and higher SNR from the biosensors by two-wavelength ratiometric signals. In this study, we used DNA-grafted graphene oxide (GO) to ratiometrically detect intracellular pH ranging from basic to acidic. A high SNR with a 35-fold difference in the ratiometric output has been achieved through careful optimization: (1) A high DNA conjugation yield of 45% has been gained through utilizing the partial double-stranded assembly strategy. (2) Herring sperm DNA (HSD) plays an important role in improving the sensitivity of the nanosystem by purifying and passivating the surface of GO; therefore, the concentration of HSD has been optimized to pursue the most sensitive ratiometric response. Apart from the ultrahigh SNR, fabricated GO-AR-Cy5/IFO-Cy3 exhibited excellent stability and biocompatibility in biological environments. Further experiments demonstrated that the nanosystem worked well in live cells in response to pH changes. It is possible to distinguish small pH differences and realize quantitative detection based on ratiometric fluorescence imaging by laser scanning confocal microscope analysis, which makes the nanosystem a promising candidate for further biological study and clinical applications.