A covalent triazine framework as an oxidase mimetic in the luminol chemiluminescence system: application to the determination of the antioxidant rutin

Platforms of graphene/MXene heterostructure for electrochemical monitoring of rutin in drug and Tartary buckwheat tea

The use of two-dimensional heterostructure composite as electrode modification material has become a new strategy to improve the electrocatalytic activity and electroactive sites of electrochemical sensor. Herein, a soluble heterostructure, namely rGO-PSS@MXene, was designed and synthesized by integrating poly (sodium p-styrenesulfonate)-functionalized reduced graphene oxide into MXene nanosheets via ultrasonic method. The interactive heterostructure can effectively alleviate the self-stacking of MXene and rGO, endowing them with superior electron transfer capacity and large specific surface area, thereby producing prominent synergistic electrocatalytic effect towards rutin. In addition, the excellent enrichment effect of rGO-PSS@MXene for rutin also plays an important role through the electrostatic and π-π stacking interactions. The electrochemical characteristics of rutin on the sensor were examined in detail and a sensitive sensing method was proposed. Under optimized conditions, the method showed satisfactory linear relationship for rutin in the concentration range of 0.005-10.0 μM, with limit of detection of 1.8 nM (S/N = 3). The quantitative validation results in herbal medicine and commercial Tartary buckwheat tea were highly consistent with the labeled quantity and the results of HPLC determination, respectively, suggesting the sensor possessed excellent selectivity and accuracy. This proposed strategy for rutin determination is expected to expand the application of MXene heterostructure in electrochemical sensors, and is envisioned as a promising candidate for quality monitoring of drugs and foods.

Wavelength-dependent photoelectrochemical response demonstrated by the determination of acetaminophen and rutin in differential molecularly imprinted polymers strategy

Herein, the excitation wavelength-dependent responses of the molecularly imprinted polymer (MIP) photoelectrochemical (PEC) sensors were investigated, using acetaminophen (AP), rutin (RT) and perfluorooctanoate (PFOA) as the model templates, pyrrole as functional monomer, CuInS2@ZnS/TiO2 NTs as the basic photoelectrode. With wavelength λ > 240 nm, the photocurrent of MIPPFOA enhanced at higher concentrations of PFOA. With increasing AP concentration, the photocurrents of MIPAP could decline with λ < 271 nm, not change at λ = 270 nm, or increase with λ > 270 nm. As RT concentration increased, the photocurrents of MIPRT could decrease (λ < 431 nm), not change (λ = 431 nm) or increase (λ > 431 nm). The PEC responses depend on the comprehensive interaction of two contrary mechanisms from the template molecules within the MIP membrane. The photocurrent is enhanced by the role of the electron donor for photo-generated holes but attenuated due to the steric hindrance effect and the excitation light intensity loss via absorption or scattering. The apparent molar absorption coefficient of AP and RT within MIP membranes are 9.1-19.4 folds of those measured from dilute solutions. By using a routine UV lamp as the light source, the photocurrents of MIPRT at 254 nm and MIPAP at 365 nm were used to determine RT and AP, with the detection limits of 5.3 and 16 nM, respectively. The interference from the non-specific adsorption of interferents on the surfaces of MIPAP and MIPRT was reduced by one order of magnitude via a differential strategy.

Research Progress on the Application of Covalent Organic Framework Nanozymes in Analytical Chemistry

Covalent organic frameworks (COFs) are porous crystals that have high designability and great potential in designing, encapsulating, and immobilizing nanozymes. COF nanozymes have also attracted extensive attention in analyte sensing and detection because of their abundant active sites, high enzyme-carrying capacity, and significantly improved stability. In this paper, we classify COF nanozymes into three types and review their characteristics and advantages. Then, the synthesis methods of these COF nanozymes are introduced, and their performances are compared in a list. Finally, the applications of COF nanozymes in environmental analysis, food analysis, medicine analysis, disease diagnosis, and treatment are reviewed. Furthermore, we also discuss the application prospects of COF nanozymes and the challenges they face.

COF-300-AR@CRL as a two-in-one nanocatalyst for one-step chemiluminescent detection of diphenyl ether herbicide residues in vegetable and fruit samples

A sensitive and accurate chemiluminescence (CL) method was developed for one-step determination of diphenyl ether herbicides at trace level with nitrofen (2,4-dichlorophenyl-p-nitrophenyl ether) as a model analyte. Candida rugosa lipase (CRL) was immobilized on a nanocarrier of amine-linked covalent organic framework (named as COF-300-AR) through a self-assembly strategy. The formed nanocomposite of COF-300-AR@CRL owns dual enzymatic catalytic activities. It can directly catalyze luminol-dissolved oxygen reaction to produce an intense CL emission by virtue of oxidase mimic activity of COF-300-AR but also effectively decompose nitrofen to release phenolic compounds by the immobilized CRL. The released phenolic compounds own strong reducing capacity and in turn decrease the CL signal sharply. Under the optimal conditions, the decreased CL intensity presents a good linear response to nitrofen concentration in the 0.02-50.0 μM range. The limit of detection (LOD, 3sb/S) is 11 nM and the precision is 2.0% for replicate measurements of 50.0 nM nitrofen solution (n = 11). This method has the advantages of rapid analytical efficiency, good selectivity, satisfactory stability, and recyclability. Recovery experiments were conducted on spiked vegetable and fruit samples with the recoveries falling in the range 90.0-107.0%.

Carbon Vacancy-Enhanced Activity of Fe-N-C Single Atom Catalysts toward Luminol Chemiluminescence in the Absence of H2O2

The classic luminol-H2O2 chemiluminescence (CL) systems suffer from easy self-decomposition of H2O2 at room temperature, hindering the practical applications of the luminol-H2O2 CL system. In this work, unexpectedly, we found that the carbon vacancy-modified Fe-N-C single atom catalysts (VC-Fe-N-C SACs) can directly trigger a luminol solution to generate strong CL emission in the absence of H2O2. The Fe-based SACs were prepared through the conventional pyrolysis of zeolitic imidazolate frameworks. The massive carbon vacancies were readily introduced into Fe-N-C SACs through a tannic acid-etching process. Carbon vacancy significantly enhanced the catalytic activity of Fe-N-C SACs on the CL reaction of luminol-dissolved oxygen. The VC-Fe-N-C SACs performed a 13.4-fold CL enhancement compared with the classic luminol-Fe2+ system. It was found that the introduction of a carbon vacancy could efficiently promote dissolved oxygen to convert to reactive oxygen species. As a proof of concept, the developed CL system was applied to detect alkaline phosphatase with a linear range of 0.005-1 U/L as well as a detection limit of 0.003 U/L. This work demonstrated that VC-Fe-N-C SAC is a highly efficient CL catalyst that can promote the analytic application of the luminol CL system.

Vanillin-Catalyzed highly sensitive luminol chemiluminescence and its application in food detection

Among various chemiluminescence (CL) systems, luminol-H₂O₂ system is used extensively due to its cheapness and sensitivity. Herein, 4-hydroxy-3-methoxybenzaldehyde, known as vanillin, was firstly found to be able to catalyze H₂O₂ very efficiently to produce ^•OH and O₂^•-, which can be used to enhance the CL of luminol-H₂O₂ as Co⁺. In alkaline aqueous solution, vanillin catalyzed the dissociation of H₂O₂ into active ^•OH and O₂^•- radicals and accelerated luminol-H₂O₂ reaction to emit strong CL signal. Combining the stabilizing function of β-CD, CL intensity of luminol-H₂O₂ was enhanced further. Thus, dual-signal amplification of luminol-H₂O₂ chemiluminescence based on the catalyzing function of vanillin and the stabilizing function of β-CD was proposed and its mechanism was explored deeply in the manuscript. Interestingly, vanillin is a highly prized flavor compound broadly used as food additive, however, the excessive intake of vanillin is harmful to human and thus the determination of vanillin is very important. On the basis of the luminol-β-CD-H₂O₂/vanillin reaction, a low-cost, rapid and simple CL sensor has been established to detect vanillin. The sensor was able to detect vanillin in the range of 1.0 μM ∼ 75 μM with a detection limit of 0.89 μM (S/N = 3). It can also be used for CL imaging detection with satisfactory results.

Rapid and Sensitive Detection of Rutin in Food Based on Nitrogen-Doped Carbon Quantum Dots as Fluorescent Probe

The aim of this study was to establish a rapid detection method of rutin in food based on nitrogen-doped carbon quantum dots (N-CDs) as the fluorescent probe. N-CDs were prepared via a single-step hydrothermal process using citric acid as the carbon source and thiourea as the nitrogen source. The optical properties of N-CDs were characterized using an electron transmission microscope, X-ray diffractometer, Fourier-transform infrared spectrometer, and nanoparticle size potential analyzer. The UV/Vis absorption property and fluorescence intensity of N-CDs were also characterized using the respective spectroscopy techniques. On this basis, the optimal conditions for the detection of rutin by N-CDs fluorescent probes were also explored. The synthesized N-CDs were amorphous carbon structures with good water solubility and optical properties, and the quantum yield was 24.1%. In phosphate-buffered solution at pH = 7.0, Rutin had a strong fluorescence-quenching effect on N-CDs, and the method showed good linearity (R² = 0.9996) when the concentration of Rutin was in the range of 0.1-400 μg/mL, with a detection limit of 0.033 μg/mL. The spiked recoveries in black buckwheat tea and wolfberry were in the range of 93.98-104.92%, the relative standard deviations (RSD) were in the range of 0.35-4.11%. The proposed method is simple, rapid, and sensitive, and it can be used for the rapid determination of rutin in food.

Portable Wireless Intelligent Electrochemical Sensor for the Ultrasensitive Detection of Rutin Using Functionalized Black Phosphorene Nanocomposite

To build a portable and sensitive method for monitoring the concentration of the flavonoid rutin, a new electrochemical sensing procedure was established. By using nitrogen-doped carbonized polymer dots (N-CPDs) anchoring few-layer black phosphorene (N-CPDs@FLBP) 0D-2D heterostructure and gold nanoparticles (AuNPs) as the modifiers, a carbon ionic liquid electrode and a screen-printed electrode (SPE) were used as the substrate electrodes to construct a conventional electrochemical sensor and a portable wireless intelligent electrochemical sensor, respectively. The electrochemical behavior of rutin on the fabricated electrochemical sensors was explored in detail, with the analytical performances investigated. Due to the electroactive groups of rutin, and the specific π-π stacking and cation-π interaction between the nanocomposite with rutin, the electrochemical responses of rutin were greatly enhanced on the AuNPs/N-CPDs@FLBP-modified electrodes. Under the optimal conditions, ultra-sensitive detection of rutin could be realized on AuNPs/N-CPDs@FLBP/SPE with the detection range of 1.0 nmol L^-1 to 220.0 μmol L^-1 and the detection limit of 0.33 nmol L^-1 (S/N = 3). Finally, two kinds of sensors were applied to test the real samples with satisfactory results.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

MWCNTs-CTAB and HFs-Lac Nanocomposite-Modified Glassy Carbon Electrode for Rutin Determination

Rutin is a flavonoid glycoside compound, which is mainly transported via the blood circulation system in the human body. The monitoring of the blood concentration of rutin is of great significance in many fields such as pharmacology and pharmacokinetics. In this work, a biosensor based on multi-walled carbon nanotubes (MWCNTs), cetyltrimethylammonium bromide (CTAB), hydroxyl fullerenes (HFs), and laccase (Lac) nanocomposite-modified glassy carbon electrodes was constructed. The modified materials were characterized with a transmission electron microscope (TEM), cyclic voltammograms (CV), and electrochemical impedance spectroscopy (EIS). CTAB is used to disperse MWCNTs and improve hydrophilicity and biocompatibility of MWCNTs, while the use of Lac can enhance the oxidation of catechol structure in rutin, thus significantly improving the sensitivity and selectivity of the modified electrode. Linear sweep voltammetry (LSV) studies showed that the determination linear ranges of rutin were 0.1 µmol L⁻¹ to 2 µmol L⁻¹ and 2 µmol L⁻¹ to 11 µmol L⁻¹, with the determination limits of 30 nmol L⁻¹ and 95.5 nmol L⁻¹, respectively. The proposed biosensor can be used to detect rutin tablets and serum samples with high recovery, which indicates a good accuracy of this method, and the results are consistent with those measured by the traditional ultra-high performance liquid chromatography (UHPLC) method. Hence, this biosensor has potential practical application value in rutin drug quality testing and clinical blood drug concentration monitoring.

A new NiS nanoparticles-enhanced chemiluminescence method for determination of cephalexin in the pharmaceuticals and spiked human serum

It is reported that NiS nanoparticles (NPs) can enhance the light emission from chemiluminescence (CL) reaction of luminol-O₂ (λ_max = 425 nm), remarkably. Additionally, it was shown that cephalexin (CEF) could further increase the intensity of light emitted from NiS NPs-luminol-O₂ CL reaction. Inspired in these findings, we intended to develop a new and straightforward CL method for the determination of CEF. A calibration graph over the range of 1.00 × 10^-6 - 4.00 × 10^-5 mol L^-1 was established. The limit of detection (LOD) of the CL method was 8.00 × 10^-7 mol L^-1 . The coefficient of variation (CV) of the CL methods was 2.20% (n = 6) for the measurement of 6.00 × 10^-6 mol L^-1 CEF. NiS NPs were produced by exploiting the precipitation method and identified by employing several spectroscopic approaches. The proposed CL method was successfully used to measure CEF in some pharmaceutical and spiked human serum. The chemical mechanism governing the CL reaction was briefly explained.

Chemiluminescence determination of vancomycin by using NiS nanoparticles-luminol-O2 system

In this research, NiS nanoparticles (NPs) were produced using a hydrothermal technique and characterized by several spectroscopic methods. Here, for the first time, it was shown that NiS NPs could be exploited as a nanocatalyst in a chemiluminescence (CL) reaction. Here, it was introduced that NiS NPs could intensify luminol-O₂ CL reaction, remarkably. Besides, it was shown that vancomycin (VAN) suppresses the CL intensity of NiS NPs-luminol-O₂ reaction. By exploiting the results obtained, a new and straightforward CL method was developed for the measurement of VAN. The linear concentration range of the CL method was 4.00 × 10^-6 - 1.00 × 10^-3 mol L^-1. The limit of detection (LOD) was equal to 1.40 × 10^-6 mol L^-1 and the relative standard deviation (RSD) of the CL method was 3.00% (n = 6) for the determination of 8.00 × 10^-5 mol L^-1 VAN. The established CL method was applied to quantify VAN in the injection and spiked human serum.

Dynamic Visualization of Free Radicals at Single Oxygen Bubbles using Chemiluminescence

The generation of free radicals is a key process in the formation and the collapse of the bubbles in water, however, the direct and dynamic observation of the radicals in this process at single bubbles has never been achieved. Here, the hydroxyl (OH^. ) and oxygen (O₂ ^.- ) radicals at single oxygen bubbles are continuously traced using chemiluminescence (CL), in which these radicals at the bubble react with the surrounding luminol in the solution emitting the light. Varied increase trends of luminescence are observed in the generation of a bubble, floating, short parking at the water/air interface and the final explosion, revealing the complexity in the distribution of radicals at the bubble unprecedentedly. Despite more radicals are observed at the bubble generated at a deep position under the water for the stabilization, almost the same amount of radicals are included in the bubbles that is independent on the water pressure during the production of the bubble. This rich information collected from the dynamic study of bubbles illustrates the complicated generation and distribution process of radicals at the bubbles, and will facilitate the understanding of the function about the bubbles.

CuS nanoparticles-enhanced luminol-O2 chemiluminescence reaction used for determination of paracetamol and vancomycin

A new chemiluminescence (CL) method was proposed to measure two widely used drugs, including paracetamol (PCM) and vancomycin (VAN). The CL reaction used was the CuS nanoparticles (CuS NPs)-luminol-O₂ system. In this system, CuS NPs played the role of catalyst and increased the CL intensity. CuS NPs were easily synthesized by quick-precipitation. CuS NPs were characterized by spectroscopic techniques, and the mean size of NPs was estimated to be about 9 nm. In the developed CL methods, PCM and VAN decreased the CL intensity. In the proposed method, the linear concentration ranges were 4.0 × 10^-5-4.0 × 10^-4 mol L^-1 of PCM and 2.0 × 10^-5-6.0 × 10^-4 mol L^-1 of VAN. The limit of detections were 2.9 × 10^-5 mol L^-1 and 8.9 × 10^-6 mol L^-1 for PCM and VAN, respectively. The relative standard deviations (RSD) of the CL method were 2.99 and 4.31 (n = 6) for the determination of 3.0 × 10^-4 mol L^-1 PCM and VAN, respectively. It was also shown that the CL methods can measure PCM and VAN concentrations in various real samples.

AIEgens-based fluorescent covalent organic framework in construction of chemiluminescence resonance energy transfer system for serum uric acid detection

A covalent organic framework (COF) with aggregation-induced emission (AIE) property was successfully synthesized through in situ marriage of a commonly used AIE molecule tetraphenylethylene (TPE) with Schiff base network (SNW-1) through a simple one-pot method. The TPE@SNW-1 was characterized with different techniques of Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and nitrogen adsorption/desorption experiments. The fluorescence of the TPE@SNW-1 strongly depends on the composition of tetrahydrofuran-water binary system. The AIE property of TPE@SNW-1 was directly supported with particle size distribution by dynamic light scattering technique. With the TPE@SNW-1 as an energy acceptor, a chemiluminescence resonance energy transfer (CRET) system was constructed with bis(2,4,6-trichlorophenyl) oxalate (TCPO)-hydrogen peroxide (H₂O₂) reaction as an energy donor. The chemiluminescence (CL) signal displays a good linear relationship with concentration of H₂O₂ in the 5.0-1000.0 μmol·L^-1 range, and a detection limit of 2.34 μmol L^-1. The system was further exploited to determine uric acid based on the fact that equal stoichiometric amount of H₂O₂ can be concurrently generated under the catalysis of uricase. The procedure exhibits a linear response to uric acid concentration in the range 10.0-150.0 μmol·L^-1 and a detection limit of 4.94 μmol·L^-1. The practicability of the method was demonstrated  in the determination of uric acid in human serum samples.

Electrochemical determination of rutin by using NiFe2O4 nanoparticles-loaded reduced graphene oxide

A binary transition metal oxide containing nickel and iron (NiFe2O4) and hybridization of this nanomaterial with reduced graphene oxide (rGO) are synthesized by the hydrothermal method. X-ray diffraction (XRD) and Raman spectroscopy confirm the successful synthesis of these materials. Also, scanning electron microscope (SEM) and transmission electron microscope (TEM) images illustrated the particle morphology with the particle size of 20 nm. The synthesized material is then examined as a sensor on the surface of the glassy carbon electrode to detect a very small amount of rutin. Some electrochemical tests such as cyclic voltammetry, differential pulse voltammetry (DPV), and impedance spectroscopy indicate the remarkable accuracy of this sensor and its operation in a relatively wide range of concentrations of rutin (100 nM-100 µM). The accuracy of the proposed electrochemical sensors is approximately 100 nM in 0.1 M PBS, (pH = 3) which is relatively impressive and can be reported. Also, the stability rate after 100 DPV was about 95 %, which is a considerable and relatively excellent value. Considering the very good results, it seems that the NiFe2O4-rGO can be considered as a new proposal in the development of accurate and inexpensive electrochemical sensors.

Microwave-Assisted Synthesis of Covalent Organic Frameworks: A Review

Covalent organic frameworks (COFs) are relatively recent materials. They have received great attention due to their interesting properties. However, the application of microwaves in their synthesis, despite its advantages such as faster and more reproducible processes, is a minority. Herein, a comprehensive compilation of the research results published in the microwave-assisted synthesis (MAS) of COFs is presented. This review includes articles of 2D and 3D COFs prepared using microwaves as source of energy. The articles have been classified depending on the functional groups including boronate ester, imines, enamines, azines, and triazines, among others. It compiles the main parameters of synthesis and characteristics of the materials together with some general issues related with COFs and microwaves. Additionally, current and future perspectives of the topic have been discussed.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

Study of Antioxidant Properties of Agents from the Perspective of Their Action Mechanisms

The creation and analysis of a large variety of existing methods for the evaluation of integrated antioxidant properties are quite relevant in connection with a range of biological mechanisms of the antioxidants (AO) action. In this work, the existing methods are correlated with mechanisms of antioxidant action. It is shown that the results obtained by various methods are mainly incomparable. This can be connected with the implementation of various mechanisms of antioxidant action in methods. The analysis of the literature data presented in this review indicates the difficulty of creating a universal method and the feasibility of using integrated approaches based on the use of several methods that implement and combine various mechanisms of the chemical conversion of antioxidants. This review describes methods for studying the chelating ability of antioxidants, except for methods based on electron and hydrogen atom transfer reactions, which are currently not widely covered in modern literature. With the description of each mechanism, special attention is paid to electrochemical methods, as the interaction of active oxygen metabolites of radical and non-radical nature with antioxidants has an electron/proton/donor-acceptor nature, which corresponds to the nature of electrochemical methods and suggests that they can be used to study the interaction.

A novel peroxidase/oxidase mimetic Fe-porphyrin covalent organic framework enhanced the luminol chemiluminescence reaction and its application in glucose sensing

A Fe-porphyrin covalent organic framework (Fe-PorCOF) was prepared through a postmodification strategy and characterized using different techniques. Fe-PorCOF exhibits an inherent peroxidase/oxidase mimetic catalytic activity and sharply accelerates chemiluminescence (CL) reactions between luminol and hydrogen peroxide (H₂ O₂ ) or dissolved oxygen (O₂ ) under alkaline conditions. The catalytic role was attributed to a significant increase in production of reactive oxygen species. Using the imminent peroxidase mimetic catalytic activity of Fe-PorCOF, a new CL method was developed for determination of H₂ O₂ over a linear range from 0.01 to 10.0 μmol·L^-1 and with a limit of detection of 5.3 nmol·L^-1 . The combination of the peroxidase mimetic catalytic activity of Fe-PorCOF with the catalytic activity of glucose oxidase on glucose oxidation presents a sensitive CL method for glucose assay. The linear range and the detection limit for glucose were 0.05-8.0 μmol·L^-1 and 4.0 nmol·L^-1 , respectively. The practicability of this method was assessed by determination of glucose in human sera. As a peroxidase/oxidase mimetic, Fe-PorCOF is easy to prepare and exhibits good catalytic efficiency in the luminol reaction. We believe that this strategy will promote the development of a CL field with functional COFs as a catalyst.

Chemiluminescent self-reporting supramolecular transformations on macromolecular scaffolds

We introduce the synthesis of a self-reporting system with chemiluminescent output, which is regulated via dynamic supramolecular complex formation.