Fluorescent AgInS/ZnS quantum dots microplate and lateral flow immunoassays for folic acid determination in juice samples

Fluorescent detection of emerging virus based on nanoparticles: From synthesis to application

The spread of COVID-19 has caused huge economic losses and irreversible social impact. Therefore, to successfully prevent the spread of the virus and solve public health problems, it is urgent to develop detection methods with high sensitivity and accuracy. However, existing detection methods are time-consuming, rely on instruments, and require skilled operators, making rapid detection challenging to implement. Biosensors based on fluorescent nanoparticles have attracted interest in the field of detection because of their advantages, such as high sensitivity, low detection limit, and simple result readout. In this review, we systematically describe the synthesis, intrinsic advantages, and applications of organic dye-doped fluorescent nanoparticles, metal nanoclusters, up-conversion particles, quantum dots, carbon dots, and others for virus detection. Furthermore, future research initiatives are highlighted, including green production of fluorescent nanoparticles with high quantum yield, speedy signal reading by integrating with intelligent information, and error reduction by coupling with numerous fluorescent nanoparticles.

Fluorescence anisotropy cytosensing of folate receptor positive tumor cells using 3D polyurethane-GO-foams modified with folic acid: molecular dynamics and in vitro studies

Integrated polyurethane (PU)-based foams modified with PEGylated graphene oxide and folic acid (PU@GO-PEG-FA) were developed with the goal of capturing and detecting tumor cells with precision. The detection of the modified PU@GO-PEG surface through FA against folate receptor-overexpressed tumor cells is the basis for tumor cell capture. Molecular dynamics (MD) simulations were applied to study the strength of FA interactions with the folate receptor. Based on the obtained results, the folate receptor has intense interactions with FA, which leads to the reduction in the FA interactions with PEG, and so decreases the fluorescence intensity of the biosensor. The synergistic interactions offer the FA-modified foams a high efficiency for capturing the tumor cell. Using a turn-off fluorescence technique based on the complicated interaction of FA-folate receptor generated by target recognition, the enhanced capture tumor cells could be directly read out at excitation-emission wavelengths of 380-450 nm. The working range is between 1×10 ² to 2×10 ⁴ cells mL ^-1 with a detection limit of 25 cells mL ^-1 and good reproducibility with relative standard deviation of 2.35%. Overall, findings demonstrate that the fluorescence-based biosensor has a significant advantage for early tumor cell diagnosis.

pH-responsive glycodendrimer as a new active targeting agent for doxorubicin delivery

The present study synthesized a new kind of pH-responsive active targeting glycodendrimer (ATGD) for doxorubicin delivery to cancerous cells. First, the glycodendrimer was synthesized based on the cultivation of chitosan dendrons on amine-functionalized, silica-grafted cellulose nanocrystals. Afterward, glycodendrimer was conjugated with folic acid to provide a folate receptor-targeting agent. The response surface method was employed to obtain the optimum conditions for the preparation of doxorubicin-loaded ATGD. The effect of doxorubicin/ATGD ratio, temperature, and pH on doxorubicin loading capacity was evaluated, and high loading capacity was achieved under optimized conditions. After determining doxorubicin release pattern at acidic and physiological pH, ATGD cytotoxicity was surveyed by MTT assay. Based on the results, the loading behavior of doxorubicin onto ATGD was in good agreement with monolayer-physisorption, and drug release was Fickian diffusion-controlled. ATGD could release the doxorubicin much more at acidic pH than physiological pH, corresponding to pH-responsive release behavior. Results of MTT assay confirmed the cytotoxicity of doxorubicin-loaded ATGD in cancer cells, while ATGD (without drug) was biocompatible with no tangible toxicity. These results suggested that ATGD has the potential for the treatment of cancer.

Analysis of virginiamycin M1 in swine feed, muscle and liver samples by quantum dots-based fluorescent immunochromatographic assay

Based on a highly sensitive and specific monoclonal antibody (mAb) against virginiamycin M1 (VIR M1), a quantum dots-based fluorescent immunochromatographic assay (QDs-ICA) for quick and sensitive analysis of VIR M1 was established for the first time. The mAb showed a half-maximal inhibitory concentration (IC₅₀) of 0.5 ng/mL and cross-reactivity (CR) values below 0.1% for other three analogues when used in enzyme-linked immunosorbent assay (ELISA). The mAb was conjugated to ZnCdSe/ZnS (core/shell) QDs with maximum emission wavelength of 610 nm (orange-red) which was selected as fluorescent probe to increase QDs-ICA sensitivity. The cut-off value of QDs-ICA was 12.5 ng/mL. QDs-ICA showed a linear range from 0.7 to 14.5 ng/mL with a limit of quantification of 0.7 ng/mL. Compared with existing methods for the analysis of VIR M1, the QDs-ICA exhibited higher sensitivity. For analysis of VIR M1 concentrations spiked into swine feed, muscle and liver samples, recovery rates ranged from 94.0% to 111.6% with the highest coefficient of variation (CV) of 6.7% for intra-assay, and for inter-assay ranged from 94.7% to 107.6% with the highest CV of 9.4%. In conclusion, the QDs-ICA could be a potential method for analyzing VIR M1 in animal feed and animal-derived food.

Antibodies as Biosensors' Key Components: State-of-the-Art in Russia 2020-2021

The recognition of biomolecules is crucial in key areas such as the timely diagnosis of somatic and infectious diseases, food quality control, and environmental monitoring. This determines the need to develop highly sensitive display devices based on the achievements of modern science and technology, characterized by high selectivity, high speed, low cost, availability, and small size. Such requirements are met by biosensor systems—devices for reagent-free analysis of compounds that consist of a biologically sensitive element (receptor), a transducer, and a working solution. The diversity of biological material and methods for its immobilization on the surface or in the volume of the transducer and the use of nanotechnologies have led to the appearance of an avalanche-like number of different biosensors, which, depending on the type of biologically sensitive element, can be divided into three groups: enzyme, affinity, and cellular/tissue. Affinity biosensors are one of the rapidly developing areas in immunoassay, where the key point is to register the formation of an antigen–antibody complex. This review analyzes the latest work by Russian researchers concerning the production of molecules used in various immunoassay formats as well as new fundamental scientific data obtained as a result of their use.

Ten Years of Lateral Flow Immunoassay Technique Applications: Trends, Challenges and Future Perspectives

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.

Fluorescent hollow ZrO2@CdTe nanoparticles-based lateral flow assay for simultaneous detection of C-reactive protein and troponin T

Highly fluorescent hollow ZrO₂@CdTe nanoparticles (NPs) were synthesized efficiently via the hydrothermal method. By changing the hydrothermal time of ZrO₂@CdTe NP, the peaks of fluorescence spectra measured at fluorescent excitation of 330 nm were at 540 nm, 590 nm, and 640 nm, respectively. Hollow ZrO₂ NPs have a uniform core-shell structure with the size of 178 ± 10 nm and shell of 19 ± 4 nm. The as-prepared yellow-ZrO₂@CdTe NPs were used to develop lateral flow assay (LFA) for the sensitive and qualitative detection of C-reactive protein (CRP). The visual limit of detection of the LFA for the CRP antigen was 1 μg/L within 20 min, which is 1000-fold lower than that of colloidal gold-based LFA. In addition, a multiplex lateral flow assay (mLFA) was developed using the as-prepared green and red-ZrO₂@CdTe NPs for the simultaneous, specific, sensitive, and qualitative detection of CRP and troponin T (cTnT). The visual limits of detection of CRP and cTnT in mLFA were 10 μg/L and 0.1 mg/L, respectively. The excellent performance of ZrO₂@CdTe NPs should facilitate their application in point-of-care technology for the detection of other biomarkers.

Ternary Quantum Dots in Chemical Analysis. Synthesis and Detection Mechanisms

Ternary quantum dots (QDs) are novel nanomaterials that can be used in chemical analysis due their unique physicochemical and spectroscopic properties. These properties are size-dependent and can be adjusted in the synthetic protocol modifying the reaction medium, time, source of heat, and the ligand used for stabilization. In the last decade, several spectroscopic methods have been developed for the analysis of organic and inorganic analytes in biological, drug, environmental, and food samples, in which different sensing schemes have been applied using ternary quantum dots. This review addresses the different synthetic approaches of ternary quantum dots, the sensing mechanisms involved in the analyte detection, and the predominant areas in which these nanomaterials are used.

Rapid and simultaneous detection of heart-type fatty acid binding protein and cardiac troponin using a lateral flow assay based on metal organic framework@CdTe nanoparticles

Herein, a zirconium metal organic framework (ZrMOF) based lateral flow assay (LFA) is described for the qualitative analysis of early acute myocardial infarction (AMI) biomarkers including heart-type fatty acid binding protein (h-FABP) and cardiac troponin (cTnT). ZrMOF@CdTe nanoparticles (NPs) are synthesized by a simple hydrothermal method. By changing the hydrothermal reaction time, ZrMOF@CdTe NPs with different fluorescent colours can be obtained. They can emit different colours of fluorescence under the excitation of a single wavelength, which makes them suitable for multiplexed lateral flow assays (mLFA). The visual limit of detection of the ZrMOF@CdTe-based LFA for the h-FABP antigen is 1 μg L-1. The analysis can be completed within 8 min and has the advantages of being easy to operate and visual detection. A serum sample collected from patients is successfully detected using this LFA. This assay is widely applicable and simple, has strong anti-interference ability, and is cost-effective and can provide basic information for later treatment.

Photoluminescence-based immunochemical methods for determination of C-reactive protein and procalcitonin

Modern, sensitive, rapid, and selective analytical methods for the detection of inflammatory markers are a crucial tool for the assessment of inflammation state, efficacy of medical intervention, and the prediction of future diseases. Their development requires understanding of current state for point-of-care testing of inflammatory markers and identification of their crucial drawbacks. This review summarizes the progress in the application of luminescent labels for immunoassays. The luminescent labels became more popular in the latest decade due to their high sensitivity, selectivity, and robustness. This review presents a constructive analysis of different luminescent labels such as fluorescent organic dyes, quantum dots, long-lived emissive nanoparticles, and up-converting nanocrystals, as well as a range of the strategies for inflammatory markers determination. The advantages and disadvantages of all classes of luminescent labels are demonstrated, and the strategies of labels modification for their improvement are discussed. The current approaches for the creation of luminescent probes and robust assays are also highlighted.

Nanocomposite of CuInS/ZnS and Nitrogen-Doped Graphene Quantum Dots for Cholesterol Sensing

In this paper, nitrogen graphene quantum dots (N-GQDs) and copper indium sulfide/zinc sulfide (CIS/ZnS) QDs were synthesized via facile hydrothermal and aqueous solution routes, respectively. Herein, a fluorescent nanocomposite has been synthesized between N-GQDs and CIS/ZnS QDs in an aqueous phase. This nanocomposite was characterized by photoluminescence, Raman, and ultraviolet-visible (UV-vis) spectroscopies, high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). This fluorescent nanocomposite was developed as a highly sensitive, selective nonenzymatic cholesterol optical biosensor in 0.312-5 mM cholesterol. HRTEM micrographs confirmed the preparation of CIS/ZnS QDs and N-GQDs with average diameters of 3 and 5 nm, respectively. The as-prepared NG/CIS/ZnS QD nanocomposite had a high sensitivity for cholesterol with a wide linear range of concentration of 0.312-5 mM with an excellent correlation coefficient (R 2) of 0.9688 and limit of detection (LOD) of 0.222 mM.