Construction of an ultra-sensitive electrochemical sensor based on polyoxometalates decorated with CNTs and AuCo nanoparticles for the voltammetric simultaneous determination of dopamine and uric acid

Recent research progress of selenotungstate-based biomolecular sensing materials

Polyoxometalates (POMs) have drawn significant attention on account of their structural designability, compositional diversity and great potential applications. As an indispensable branch of POMs, selenotungstates (SeTs) have been synthesized extensively. Some SeTs have been applied as sensing materials for detecting biomarkers (e.g., metabolites, hormones, cancer markers). To gain a comprehensive understanding of advancements in SeT-based sensing materials, we present an overview that encapsulates the sensing performances and mechanisms of SeT-based biosensors. SeT-based biosensors are categorized into electrochemical catalytic biosensors, electrochemical affinity biosensors, "turn-off" fluorescence biosensors and "turn-on" fluorescence biosensors. We anticipate the expansive potential of SeT-based biosensors in wearable and implantable sensing technologies, which promises to catalyze significant breakthroughs in SeT-based biosensors.

Design and Application of Thymol Electrochemical Sensor Based on the PtNPs-CPOFs-MWCNTs Composite

In this study, the preparation of covalent polyoxometalate organic frameworks (CPOFs) is introduced using the idea of polyoxometalate and covalent organic frameworks. Firstly, the prepared polyoxometalate was functionalized with an amine group (NH₂-POM-NH₂), and then the CPOFs were prepared by a solvothermal Schiff base reaction with NH₂-POM-NH₂ and 2,4,6-trihydroxybenzene-1,3,5-tricarbaldehyde (Tp) as monomers. After the incorporation of PtNPs and MWCNTs into the CPOFs material, the PtNPs-CPOFs-MWCNTs nanocomposites, which possess excellent catalytic activity and electrical conductivity, were formed and utilized as new electrode materials for the electrochemical thymol sensors. The obtained PtNPs-CPOFs-MWCNTs composite exhibits excellent activity toward thymol, which is attributable to its large special surface area, good conductivity and the synergistic catalysis of each component. Under optimal experimental conditions, the sensor presented a good electrochemical response to thymol. The sensor shows two good linear relationships between the current and thymol concentration in the range of 2-65 μM (R² = 0.996) and 65-810 μM (R² = 0.997), with the corresponding sensitivity of 72.7 μA mM^-1 and 30.5 μA mM^-1, respectively. Additionally, the limit of detection (LOD) was calculated to be 0.2 μM (S/N = 3). At the same time, the prepared thymol electrochemical sensor revealed superior stability and selectivity. The constructed PtNPs-CPOFs-MWCNT electrochemical sensor is the first example of thymol detection.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

Synchronous electrochemical detection of dopamine and uric acid by a PMo12@MIL-100(Fe)@PVP nanocomposite

In this work, a noble-metal-free composite electrode was prepared based on PMo₁₂O₄₀^3- (PMo₁₂), C₉H₅FeO₇ (MIL-100(Fe), a Fe-based metal organic framework) and polyvinylpyrrolidone (PVP), and served as a high performance electrochemical sensor for synchronous detection of dopamine (DA) and uric acid (UA). The PMo₁₂@MIL-100(Fe)@PVP composite electrode was fabricated by a in-situ hydrothermal method. Thanks to the synergistic effect of three active components (PMo₁₂, MIL-100 and PVP), the electrode possesses large specific surface area and high electrical conductivity and therefore it shows high electrocatalytic oxidation performance of DA and UA with a spacing of 0.146 V between the two peak positions. These benefits of the electrode enable its electrochemical sensor to synchronously detect of DA and UA. Namely, the linear ranges can achieve 1-247 μM for DA and 5-406 μM for UA. Meanwhile, the detection limits are 0.586 μM for DA and 0.372 μM for UA. Moreover, the sensor can be applied to simultaneous determination of UA and DA in human serums with satisfactory recovery values.

Regenerative field effect transistor biosensor for in vivo monitoring of dopamine in fish brains

The detection of dopamine, one of the neurotransmitters in cerebral physiology, is critical in studying brain activities and understanding brain functions. However, regenerative biosensor for monitoring dopamine in the progress of physiological and pathological events is still challenging, due to lack of the platform for repetitive on-line detection-regeneration cycle. Herein, we have developed a regenerated field effect transistor (FET) combined with in vivo monitoring system. In this biosensor, gold-coated magnetic nanoparticles (Fe₃O₄@AuNPs) acts as a regenerated recognition unit for dopamine. Just by simple removal of a permanent magnet, dopamine on the biosensor interface are catalyzed by tyrosinase, thus achieving the regeneration of the biosensor. As a result, this FET biosensor not only reveals high sensitivity and selectivity, but also exhibits excellent stability after 15 regeneration processing. This biosensor is capable of monitor dopamine with a linear range between 1 μmol L^-1 and 120 μmol L^-1 and low detection limit (DL) of 3.3 nmol L^-1. Then, the platform has been successfully applied in dopamine analysis in fish brain under global cerebral cortical neurons. This FET biosensor is the first to on-line and remote control the sensitivity and DL by permanent magnet. It opens the door to reusable, inexpensive and large-scale productions.

Electrocatalytic performance of tyrosinase detection in Penaeus vannamei based on a [(PSS/PPy)(P2Mo18/PPy)5] multilayer composite film modified electrode

Polyoxometalates (POMs) are widely used in the preparation of sensors that detect the content of substances because of their excellent electron transfer capabilities. In this paper, a [(PSS/PPy)(P₂Mo₁₈/PPy)₅] multilayer composite film modified electrode was prepared by the potentiostatic deposition method. The electrochemical performance of the modified electrode was studied by cyclic voltammetry under the conditions of different modified layers, different supporting electrolytes and different sweep rates. Different concentrations of tyrosinase were catalyzed by the modified electrode under a suitable supporting electrolyte, and the electrochemical sensing of tyrosinase by the modified electrode was studied. The research results show that the modified electrode has good stability and reproducibility for electrochemical sensing of tyrosinase, and the response current has a good linear relationship with the amount of tyrosinase added. Taking peak III as an example, the detection limit (S/N = 3) was 2.7649 U mL^-1. It can be known from the timing ampere curve that as the concentration of tyrosinase in the reaction system continues to increase, its response current increases stepwise, providing a linear curve in the range of 3.66 U mL^-1 to 26.87 U mL^-1, and the minimum detection limit (S/N = 3) reaches 0.0021 U mL^-1. The [(PSS/PPy)(P₂Mo₁₈/PPy)₅] multilayer composite membrane modified electrode was used to detect tyrosinase in Penaeus vannamei. The spiked recovery of the sample was 96.3-100.8%, indicating that the modified electrode has high accuracy and can be used for the detection of tyrosinase in actual samples.

Enzyme-Free Electrochemical Biosensor Based on Localized DNA Cascade Displacement Reaction and Versatile DNA Nanosheets for Ultrasensitive Detection of Exosomal MicroRNA

MicroRNA existing in exosomes (exo-miRNA) is a crucial and reliable biomarker for cancer screening and diagnosis. However, accurate detection of ultralow exo-miRNA amounts in real samples remains a challenge. Herein, a robust and ultrasensitive electrochemical biosensor was developed based on localized DNA cascade displacement reaction (L-DCDR) and versatile DNA nanosheets (DNSs) for enzyme-free analysis of exo-miRNA. The target activated L-DCDR repeatedly by consecutive toehold-mediated strand displacement, which released plentiful P strands to hybridize with capture probes immobilized on the electrode surface and DNS tags, generating an amplified electrochemical signal for the detection of exo-miRNA. The DNS could label-free load various electroactive molecules. The electrochemical biosensor revealed high sensitivity ranging from 0.1 fM to 1 nM with a limit of detection of 65 aM and good specificity. The constructed biosensor was demonstrated to be able to detect exo-miRNA derived from gastric cancer cell line (SGC-7901) and gastric cancer patients. In addition, the developed biosensor possessed several considerable advantages including simple substrate assembly, improved reaction rate, and high signal-to-noise ratio. Therefore, this strategy has great potential in bioanalysis and clinical diagnostics.