Faraday cage-type aptasensor for dual-mode detection of Vibrio parahaemolyticus

Nanoparticles-assisted aptamer biosensing for the detection of environmental pathogens

Given the importance of public health, it is crucial to develop quick, targeted, highly sensitive, and accurate technologies to monitor pathogenic microbes in response to the growing concerns of food and environmental safety. Although conventional approaches for microbiological detection are available, they are laborious, and often skill demanding. Therefore, such approaches are incompetent in the on-site or high-throughput assessment of pathogenic microbes. Numerous efforts have been made to develop biosensors that use nucleic acid aptamer as the biorecognition element, which would avoid the abovementioned limitations. Incorporating nanomaterials (NMs) into aptamer-based biosensors (aptasensors) improves their sensitivity and specificity, opening exciting possibilities for various applications, such as bioanalysis of food and environmental samples. Over the last decade, nanomaterial-conjugated aptasensors have seen a steadily rising demand. To this end, the main goal of this study is to demonstrate the novelty in the design of nanomaterial-conjugated aptasensors and how they can be used to detect different pathogenic microbes in water and food. The intent of this paper is to evaluate the cutting-edge techniques that have appeared in nano-aptasensors throughout the past few years, such as manufacturing procedures, analytical credibility, and sensing mechanisms. Additionally, the fundamental performance parameters of aptasensing techniques (such as detection limits, and sensing ranges response) were also used to evaluate their practical applicability. Finally, it is anticipated that this study will inspire innovative ideas and techniques for the construction and use of aptasensors for monitoring pathogenic microorganisms in food, drinks, recreational water, and wastewater.

Construction of electrochemical and electrochemiluminescent dual-mode aptamer sensors based on ferrocene dual-functional signal probes for the sensitive detection of Alternariol

In this study, a novel dual-mode aptamer sensor was developed using Fca-DNA₂ as the quenching electrochemiluminescence (ECL) and electrochemical (EC) signal response probe, and Ru-MOF/Cu@Au NPs were used as the ECL substrate platform to detect Alternariol (AOH) via a competitive reaction between AOH and Fca-DNA₂. Compared with the conventional aptamer sensor with a single detection signal, this dual-mode aptamer sensor has the following advantages: (1) Electrodeposition-based rapid synthesis Ru-MOF on the electrode surface. (2) The Signal amplification substance Cu@Au NPs can synergistically catalyze Triethanolamine (TEOA) to amplify ECL behavior. (3) The aptamer sensor employs the dual-functional material Fca, which can detect both ECL and EC signals, increasing the result accuracy. Both ECL and EC methods have excellent detection performance for AOH in the detection range of 0.1 pg/mL to 100 ng/mL, with detection limits of 0.014 and 0.083 pg/mL, respectively, and are expected to be used for sensitive AOH detection in real samples.

Accurate Capture and Identification of Exosomes: Nanoarchitecture of the MXene Heterostructure/Engineered Lipid Layer

Recently, exosome detection has become an important breakthrough in clinical diagnosis. However, the effective capture and accurate identification of cancer exosomes in a complex biomatrix are still a tough task. Especially, the large size and non-conductivity of exosomes are not conducive to highly sensitive electrochemical or electrochemiluminescence (ECL) detection. Therefore, we have developed a Ti₃C₂T_x-Bi₂S_3-x heterostructure/engineered lipid layer-based nanoarchitecture to overcome the limitations. The engineered lipid layer not only specifically captured and efficiently fused CD63 positive exosomes but also showed excellent antifouling property in the biological matrix. Moreover, the MUC1 aptamer-modified Ti₃C₂T_x-Bi₂S_3-x heterostructure further identified and covered the gastric cancer exosomes that have been trapped in the engineered lipid layer. In the self-luminous Faraday cage-type sensing system, the Ti₃C₂T_x-Bi₂S_3-x heterostructure with sulfur vacancies extended the outer Helmholtz plane and amplified the ECL signal. Therefore, this sensor can be used to detect tumor exosomes in ascites of cancer patients without additional purification. It provides a new pathway to detect exosomes and other large-sized vesicles with high sensitivity.

MoS2 QDs-MXene heterostructure-based ECL sensor for the detection of miRNA-135b in gastric cancer exosomes

Exosomes play an important role in the proliferation, adhesion and migration of cancer cells. In this study, we have developed a novel electrochemiluminescence (ECL) sensor based on MoS₂ QDs-MXene heterostructure and Au NPs@biomimetic lipid layer to detect exosomal miRNA. MoS₂ QDs-MXene heterostructure had been prepared as the luminescence probe. Ti₃C₂T_x MXene nanosheets possessed the large specific surface area, excellent flexibility and superior conductivity. MoS₂ QDs on the MXene nanosheets worked as the radiation center to generate strong ECL signal. Meanwhile, Au NPs with biomimetic lipid layer have been modified on the electrode, which retained the lipid dynamics and excellent antifouling property. When miRNA-135b was recognized on the Au NPs@biomimetic lipid layer, MoS₂ QDs-MXene heterostructure was linked on the electrode and further extended the outer Helmholtz plane. As a result, the self-luminous Faraday cage-mode sensing system has been used to detect miRNA-135b from 30 fM to 20 nM with a detection limit of 10 fM. Furthermore, gastric cancer exosomal miRNA in the ascites of clinical patients has been detected successfully. The sensing system can be served as a versatile platform with huge application potential in the field of exosome detection.

DNA walker-mediated biosensor for target-triggered triple-mode detection of Vibrio parahaemolyticus

Herein, we have constructed a target-triggered and DNA walker-mediated biosensor with triple signal (BTS) outputs mode for sensitive and reliable detection of pathogenic bacteria. Vibrio parahaemolyticus (VP) being the detection target model, the aptamer conformational changes induced by VP have been designed to activate the DNA walk on the modifiable and conductive surface of Fe3O4 nanoparticles to generate triple signal outputs, including electrochemiluminescence (ECL), fast scan cyclic voltammetry (FSCV) and fluorescent pixel counting (FLPC). Limits of quantification (LOQ) of VP were as low as 1 CFU⋅mL-1 by ECL with a linear range of 1-106 CFU⋅mL-1, 1 CFU⋅mL-1 by FSCV with a linear range of 1-106 CFU⋅mL-1, and 10 CFU⋅mL-1 by FLPC with a linear range of 10-107 CFU⋅mL-1 respectively, all squared correlation coefficients R2 being > 0.99. In addition, optical and electrochemical results, signal-on and signal-off results, electrode phase and solution phase results could be mutually verified by integrating of multiple detection techniques in one biosensor, greatly improving the accuracy and reliability. Therefore, the designed BTS has provided a powerful strategy for pathogenic bacteria detection considering its high detection sensitivity and accuracy, exhibiting great potential in food safety, water quality and biological contamination.

An ultrathin 2D Yb(III) metal-organic frameworks with strong electrochemiluminescence as a "on-off-on" platform for detection of picric acid and berberine chloride form

To investigate the strong electrochemiluminescence (ECL) of ultrathin two dimensional metal-organic frameworks (2D MOFs) is crucial. In this work, we reported the strong ECL behavior of 2D Yb-MOFs, which exhibited thickness-dependent ECL. The thinner the 2D Yb-MOFs, the stronger the ECL signals. The corresponding ECL emission mechanism was investigated in detail, which was ascribed to the thinner 2D Yb-MOF with larger specific surface area, provided more luminophores, better electronic conductivity and superior fluorescence quantum yield, which yielded a higher ECL intensity. Considering the excellent ECL performances above, the ultrathin 2D Yb-MOF-1 was selected as new ECL emitter so that a sensor could be fabricated to realize the "on-off-on" detection of picric acid (PA) and berberine chloride form (BCF). The proposed sensor strategy exhibited a good analytical performance, where the linear range for PA detection was from 0.1 μM to 1 μM with a limit of 81.3 nM, and that for BCF detection from 0.05 μM to 1 μM with a limit of 36.5 nM. This study carves out a novel avenue for exploiting excellent ECL materials.

Electrochemical Aptasensors Based on Hybrid Metal-Organic Frameworks

Metal-organic frameworks (MOFs) offer a unique variety of properties and morphology of the structure that make it possible to extend the performance of existing and design new electrochemical biosensors. High porosity, variable size and morphology, compatibility with common components of electrochemical sensors, and easy combination with bioreceptors make MOFs very attractive for application in the assembly of electrochemical aptasensors. In this review, the progress in the synthesis and application of the MOFs in electrochemical aptasensors are considered with an emphasis on the role of the MOF materials in aptamer immobilization and signal generation. The literature information of the use of MOFs in electrochemical aptasensors is classified in accordance with the nature and role of MOFs and a signal mode. In conclusion, future trends in the application of MOFs in electrochemical aptasensors are briefly discussed.