Fabrication of homogeneous waffle-like silver composite substrate for Raman determination of trace chloramphenicol

A facile electrochemical aptasensor for chloramphenicol detection based on synergistically photosensitization enhanced by SYBR Green I and MoS2

This study reports the development of a photocatalytic electrochemical aptasensor for the purpose of detecting chloramphenicol (CAP) antibiotic residues in water by utilizing SYBR Green I (SG) and chemically exfoliated MoS2 (ce-MoS2) as synergistically signal-amplification platforms. The Au nanoparticles (AuNPs) were electrodeposited onto the surface of an indium tin oxide (ITO) electrode. After that, the thiolate-modified cDNA, also known as capture DNA, was combined with the aptamer. Subsequently, photosensitized SG molecules and ce-MoS2 nanomaterial were inserted into the groove of the resultant double-stranded DNA (dsDNA). The activation of the photocatalytic process upon exposure to light resulted in the generation of singlet oxygen. The singlet oxygen effectively split the dsDNA, resulting in significant enhancement in the current of [Fe(CN)6]3-/4-. When the CAP was present, both SG molecules and ce-MoS2 broke away from the dsDNA, which turned off the photosensitization response, leading to significant reduction in the current of [Fe(CN)6]3-/4-. Under the optimal conditions, the aptasensor exhibited a linear relationship between the current of [Fe(CN)6]3-/4- with logarithmic concentrations of CAP from 20 to 1000 nM, with a detection of limit (3σ) of 3.391 nM. The aptasensor also demonstrated good selectivity towards CAP in the presence of interfering antibiotics, such as tetracycline, streptomycin, levofloxacin, ciprofloxacin, and sulfadimethoxine. Additionally, the results obtained from the analysis of natural water samples using the proposed aptasensor were consistent with the findings acquired through the use of a liquid chromatograph-mass spectrometer. Therefore, with its simplicity and high selectivity, this aptasensor can potentially detect alternative antibiotics in environmental water samples by replacing the aptamers based on photosensitization.

Carbon-dots encapsulated luminescent metal-organic frameworks@surface molecularly imprinted polymer: A facile fluorescent probe for the determination of chloramphenicol

In this study, carbon dots (CDs)-encapsulated luminescent metal-organic frameworks@surface molecularly imprinted polymer (CDs@MOF@SMIP) was facilely prepared and applied as fluorescent probe for specific identification and sensitive detection of chloramphenicol (CAP) in food. Fluorescent CDs, serving as signal tags, were encapsulated within metal-organic backbones (ZIF-8), yielding luminescent MOF materials (CDs@ZIF-8). The synthesized CDs, CDs@ZIF-8 and CDs@ZIF-8@SMIP were investigated by morphological and structural characterizations (UV-Vis, XRD, FT-IR, BET, TEM). The CDs@ZIF-8@SMIP probe was demonstrated to have remarkable selectivity and sensitivity towards CAP. Its fluorescence decreased linearly with CAP concentration from 0.323 μg L-1 (0.001 μM) to 8075.0 μg L-1 (25.0 μM), featuring a low detection limit of 0.08 μg L-1. The CDs@ZIF-8@SMIP-based fluorescence strategy achieved satisfactory recoveries (95.5 % - 101.0 %) in CAP-spiked commercial foods with RSD < 4.4 % (n = 3). These results indicate that this method can effectively detect trace CAP in food matrices and has broad application prospects.

Design of MXene-Based Multiporous Nanosheet Stacking Structures Integrating Multiple Synergistic SERS Enhancements for Ultrasensitive Detection of Chloramphenicol

Motivated by the desire for more sensitivity and stable surface-enhanced Raman scattering (SERS) substrates to trace detect chloramphenicol due to its high toxicity and ubiquity, MXene has attracted increasing attention and is encountering the high-priority task of further observably improving detection sensitivity. Herein, a universal SERS optimization strategy that incorporates NH4VO3 to induce few-layer MXenes assembling into multiporous nanosheet stacking structures was innovatively proposed. The synthesized Nb2C-based multiporous nanosheet stacking structure can achieve a low limit of detection of 10-10 M and a high enhancement factor of 2.6 × 109 for MeB molecules, whose detection sensitivity is improved by 3 orders of magnitude relative to few-layer Nb2C MXenes. Such remarkably enhanced SERS sensitivity mainly originates from the multiple synergistic contributions of the developed physical adsorption, the chemical enhancement, and the conspicuously improved electromagnetic enhancement arising from the intersecting MXenes. Furthermore, the improved SERS sensitivity endows Nb2C-based multiporous structures with the capability to achieve ultrasensitive detection of chloramphenicol with a wide linear range from 100 μg/mL to 1 ng/mL. We believe it is of great significance in conspicuously developing the SERS sensitivity of other MXenes with surficial negative charges and has a great promising perspective for the trace detection of other antibiotics in microsystems.

An electrochemical aptasensor for the detection of chloramphenicol based on ultra-small Au-inserted hollow PCN-222 MOF

The excessive utilization of antibiotics has led to significant water contamination and posed severe threats to human well-being. Consequently, the pressing imperative to identify antibiotics in the environment arises. In this study, we have successfully synthesized a hollow PCN-222 MOF distinguished by its substantial surface area and abundant functional groups, particularly the porphyrin cores. To augment the electrical conductivity of the hollow PCN-222 (HPCN-222), gold (Au) particles were incorporated within the porphyrin core using a fundamental hydrothermal method. This modification facilitated the effective immobilization of aptamer strands through π-π stacking and electrostatic interactions. As a result, the Au@HPCN-222 composite demonstrated exceptional efficacy as a substrate for immobilizing the aptamer (Apt) onto the GCE surface. By employing differential pulse voltammetry (DPV) we successfully achieved the detection of chloramphenicol (CAP) with a remarkably low limit of detection of 0.0138 ng mL-1 and the peak DPV currents at 0.18 V (vs. Ag/AgCl) were used for calibration. Furthermore, this aptasensor exhibited high selectivity and reproducibility.

Mesoporous silica coated core-shell nanoparticles substrate for size-selective SERS detection of chloramphenicol

With the growing popularity of the non-destructive technique, surface-enhanced Raman spectroscopy (SERS) demands a highly sensitive and reproducible plasmonic nanoparticles substrate. In this study, a novel bimetallic core-shell nanoparticles (Au@Ag@mSiO₂NP) substrate consisting of a gold core, silver shell, and a mesoporous silica coating was synthesized. The mesoporous coating structure was created by employing template molecules such as surfactant and their subsequent removal allowing selective screening based on the size of analyte molecules. Results showed that the plasmonic substrate could selectively enhance small molecules by preventing large macromolecules to reach the exciting zone of the substrate core, achieving the detection of chloramphenicol in milk samples with a detection limit of 6.68 × 10^-8 M. Moreover, the mesoporous coating provided additional stability to the Au@Ag nanoparticles, leading to the reusability of the substrate. Thus, this work offered a simple and smart Au@Ag@mSiO₂NP substrate for effective SERS detection of analytes.

A review on nanomaterial-based electrodes for the electrochemical detection of chloramphenicol and furazolidone antibiotics

To grow food for people, antibiotics were used, and these antibiotics can accumulate in the human body through food metabolism, which may have remarkably harmful effects on human health and safety. Therefore, low-cost sensors are needed for the detection of antibiotic residues in food samples. Recently, nanomaterial-based electrochemical sensors such as carbon nanoparticles, graphene nanoparticles, metal oxide nanoparticles, metal nanoparticles, and metal-organic nanostructures have been successfully used as sensing materials for the detection of chloramphenicol (CP) and furazolidone (FZ) antibiotics. However, additional efforts are still needed to fabricate effective multi-functional nanomaterial-based electrodes for the preparation of portable electrochemical sensor devices. The current review focuses on a quick introduction to CP and FZ antibiotics, followed by an outline of the current electrochemical analytical methods. In addition, we have discussed in-depth different nanoparticle supports for the electrochemical detection of CP and FZ in different matrices such as food, environmental, and biological samples. Finally, a summary of the current problems and future perspectives in this area are also highlighted.

The Role of Surface Enhanced Raman Scattering for Therapeutic Drug Monitoring of Antimicrobial Agents

The rapid quantification of antimicrobial agents is important for therapeutic drug monitoring (TDM), enabling personalized dosing schemes in critically ill patients. Highly sophisticated TDM technology is becoming available, but its implementation in hospitals is still limited. Among the various proposed techniques, surface-enhanced Raman scattering (SERS) stands out as one of the more interesting due to its extremely high sensitivity, rapidity, and fingerprinting capabilities. Here, we present a comprehensive review of various SERS-based novel approaches applied for direct and indirect detection and quantification of antibiotic, antifungal, and antituberculosis drugs in different matrices, particularly focusing on the challenges for successful exploitation of this technique in the development of assays for point-of-care tests.

Label free structure-switching fluorescence polarization detection of chloramphenicol with truncated aptamer

In this study, the original chloramphenicol aptamer containing 80 bases was truncated to 30 bases with high affinity by the SYBR Green I assay. It was found that the ionic strength and type affect the recognition of aptamers, especially magnesium ion played a vital role in the binding process. Furthermore, the binding performance of aptamer, including binding mode, key binding sites and conformational changes were further investigated by circular dichroism spectroscopy, UV-vis absorption spectrum and molecular docking. Based on these research data, we inferred that chloramphenicol bound to the minor groove region in the aptamer double helix. Finally, the optimized aptamer LLR10 was used to develop a novel label free fluorescence polarization assay to detect chloramphenicol within SYBR Green I as the source of fluorescence polarization signal. Under optimal conditions, the designed method showed a linear detection range of 0.1-10 nM with a detection limit of 0.06 nM. Additionally, the aptasensor exhibited a high accuracy to the detection of chloramphenicol in milk samples with a recovery rate from 93.7% to 98.4%. Therefore, the developed label free fluorescence polarization aptasensor provides a new idea for the rapid, reliable and sensitive detection of chloramphenicol, which can be applied to food safety control.