Photoelectrochemical detection of human epidermal growth factor receptor 2 (HER2) based on Co3O4-ascorbic acid oxidase as multiple signal amplifier

Modified Au:Fe-Ni magnetic micromotors improve drug delivery and diagnosis in MCF-7 cells and spheroids

Nano/micromotors hold immense potential for revolutionizing drug delivery and detection systems, especially in the realm of cancer diagnosis and treatment, owing to their distinctive features, including precise propulsion, maneuverability, and meticulously designed surface modifications. In this study, we explore the capabilities of modified and magnetically driven micromotors as active drug delivery systems within 2D and 3D cell culture environments and cancer diagnosis. We synthesized gold (Au) and iron-nickel (Fe-Ni) metallic-based magnetic micromotors (Au:Fe-Ni MMs) through electrochemical methods, equipping them with functionalities for controlled doxorubicin (DOX) release and cancer cell recognition. In 2D and spheroids of MCF-7 adenocarcinoma cells, the Au segment of these micromotors was utilized to help DOX loading through poly(sodium-4-styrenesulfonate) (PSS) functionalization, and the attachment of antiHER2 antibodies for specific recognition. This innovative approach enabled controlled drug release within the cancerous microenvironment, coupled with magnetic (Fe-Ni) propulsion for biocompatible drug delivery to MCF-7 cells. Furthermore, antiHER2 immobilized Au:Fe-Ni MMs effectively interacted with receptors, capitalizing on the overexpression of HER2 antigens on MCF-7 cells. Encouraging outcomes were observed, particularly in spheroid models, underscoring the remarkable potential of these multifunctional micromotors for advancing intelligent drug delivery methodologies and diagnostic purposes.

Superoxide dismutase-like cerium dioxide hollow sphere-based highly specific photoelectrochemical biosensing for ascorbic acid

Conventional N-type semiconductor-based photoelectrochemical (PEC) sensors are difficult to achieve high selectivity for ascorbic acid (AA) detection in real samples because co-existing reducing agents act as hole sacrificial agents like AA to promote the increase of photocurrent. Cerium dioxide (CeO2) is a superoxide dismutase-like nanozyme with the reversible Ce3+/Ce4+ redox pair as well as one of alternative N-type semiconductors. To address the problem of PEC detection selectivity of AA, bifunctional CeO2 is a good choice. Herein, a novel and rational PEC biosensor for AA is constructed based on CeO2 hollow spheres as both AA superoxide dismutase-like nanozyme and the photoelectric beacon, which enable the PEC approach with high selectivity. In this protocol, AA can selectively induce a decrease in the CeO2-based photoanode current, which is significantly different from the conventional N-type semiconductor-based PEC sensor, this unique working mechanism is also proposed. The results show that the CeO2-based photocurrent response decreases linearly with AA concentrations in the ranges of 1 μM-600 μM and 600 μM-3000 μM, with a limit of detection of 0.33 μM. Moreover, the fabricated PEC biosensor has advantages of cost-effectiveness, replicability, and stability. Additionally, the sensor is competent for AA determination in practical settings and has achieved satisfactory results.

Phospholipid Bilayer Integrated with Multifunctional Peptide for Ultralow-Fouling Electrochemical Detection of HER2 in Human Serum

Electrochemical biosensing devices face challenges of severe nonspecific adsorption in complex biological matrices for the detection of biomarkers, and thus, there is a significant need for sensitive and antifouling biosensors. Herein, a sensitive electrochemical biosensor with antifouling and antiprotease hydrolysis ability was constructed for the detection of human epidermal growth factor receptor 2 (HER2) by integrating multifunctional branched peptides with distearoylphosphatidylethanolamine-poly(ethylene glycol) (DSPE-PEG) self-assembled bilayer. The peptide was designed to possess antifouling, antiprotease hydrolysis, and HER2 recognizing capabilities. Molecular dynamics simulations demonstrated that the DSPE was able to effectively self-assemble into a bilayer, and the water contact angle and electrochemical experiments verified that the combination of peptide with the DSPE-PEG bilayer was conducive to enhancing the hydrophilicity and antifouling performance of the modified surface. The constructed HER2 biosensor exhibited excellent antifouling and antiprotease hydrolysis capabilities, and it possessed a linear range of 1.0 pg mL-1 to 1.0 μg mL-1, and a limit of detection of 0.24 pg mL-1. In addition, the biosensor was able to detect HER2 in real human serum samples without significant biofouling, and the assaying results were highly consistent with those measured by the enzyme-linked immunosorbent assay (ELISA), indicating the promising potential of the antifouling biosensor for clinical diagnosis.

A sandwich-type electrochemical immunosensor for sensitive detection of HER2 based on dual signal amplification of La-MOF-PbO2 and PEI-MoS2NFs composites

In recent decades, the incidence of breast cancer has increased year by year, posing a serious threat to human health and quality of life, and about 30% of breast cancer patients have human epidermal growth factor receptor 2 (HER2) overexpression. Therefore, HER2 has become an important biomarker and indicator for the clinical evaluation of breast cancer in diagnosis, prognosis and recurrence. In this work, polyethyleneimine functionalized MoS₂ nanoflowers (PEI-MoS₂NFs) with good electrical conductivity and abundant active binding sites were designed and employed as a sensing platform for immobilizing the primary antibody of HER2 (Ab₁). In addition, a La-MOF-PbO₂ composite with a large specific surface area and good conductivity was used to load lots of electroactive toluidine blue (TB) and the secondary antibody of HER2 (Ab₂) via gold nanoparticles (AuNPs) as the linker. Thus, the constructed sandwich-type electrochemical immunosensor was applied for sensitive detection of HER2, which showed a wide linear range from 100 fg mL^-1 to 10 μg mL^-1 with a lower limit of detection of 15.64 fg mL^-1. Therefore, the resulting immunosensor in this study would have a potential application in clinical bioanalysis.

Photoelectrochemical sensors based on paper and their emerging applications in point-of-care testing

Point-of-care testing (POCT) technology is urgently required owing to the prevalence of the Internet of Things and portable electronics. In light of the attractive properties of low background and high sensitivity caused by the complete separation of excitation source and detection signal, the paper-based photoelectrochemical (PEC) sensors, featured with fast in analysis, disposable and environmental-friendly have become one of the most promising strategies in POCT. Therefore, in this review, the latest advances and principal issues in the design and fabrication of portable paper-based PEC sensors for POCT are systematically discussed. Primarily, the flexible electronic devices that can be constructed by paper and the reasons why they can be used in PEC sensors are expounded. Afterwards, the photosensitive materials involved in paper-based PEC sensor and the signal amplification strategies are emphatically introduced. Subsequently, the application of paper-based PEC sensors in medical diagnosis, environmental monitoring and food safety are further discussed. Finally, the main opportunities and challenges of paper-based PEC sensing platforms for POCT are briefly summarized. It provides a distinct perspective for researchers to construct paper-based PEC sensors with portable and cost-effective, hoping to enlighten the fast development of POCT soon after, as well as benefit human society.

Photoelectrochemical immunosensor for HER2 detection based on BiVO4-Bi2S3 heterojunction as photoactive material and CdS as signal probe

A sandwiched photoelectrochemical (PEC) sensor was developed for sensitive detection of human epidermal growth factor receptor 2 (HER2) based on BiVO₄-Bi₂S₃ heterojunction as the photoelectric material accompanied with magnetic nanoparticles for enrichment of HER2 and CdS for signal amplification. The in situ generation of Bi₂S₃ on the surface of BiVO₄ forming a BiVO₄-Bi₂S₃ heterojunction is more conducive to the transit of electron-hole pairs. Antibody-modified MNs are utilized to capture and separate HER2 from samples. After forming a sandwich immune structure, under illumination, the photocurrent shows an increasing trend with the increment of HER2 concentration. The PEC immunosensor displays a good linear concentration range between 1.00 and 1.00 × 10³ pg·mL^-1 and a low limit of detection down to 0.680 pg·mL^-1 (S/N = 3) for HER2 under a bias voltage of 0.1 V (vs. Ag/AgCl electrode). Furthermore, the sensor was successfully applied to detect HER2 in serum samples with recoveries that ranged between 96.1 and 114% with RSDs between 1.3 and 5.9%.

CdSe-Co3O4@TiO2 nanoflower-based photoelectrochemical platform probing visible light-driven virus detection

The design and construction of a visible light-driven photoelectrochemical (PEC) device is described based on a CdSe-Co₃O₄@TiO₂ nanoflower (NF). Moreover, an application to the ultrasensitive detection of viruses, such as hepatitis E virus (HEV), HEV-like particles (HEV-LPs), and SARS-CoV-2 spike protein in complicated lysate solution, is demonstrated. The photocurrent response output of a PEC device based on CdSe-Co₃O₄@TiO₂ is enhanced compared with the individual components, TiO₂ and CdSe-Co₃O₄. This can be attributed to the CdSe quantum dot (QD) sensitization effect and strong visible light absorption to improve overall system stability. A robust oxygen-evolving catalyst (Co₃O₄) coupled at the hole-trapping site (CdSe) extends the interfacial carrier lifetime, and the energy conversion efficiency was improved. The effective hybridization between the antibody and virus resulted in a linear relationship between the change in photocurrent density and the HEV-LP concentration ranging from 10 fg mL^-1 to 10 ng mL^-1, with a detection limit of 3.5 fg mL^-1. This CdSe-Co₃O₄@TiO₂-based PEC device achieved considerable sensitivity, good specificity, and acceptable stability and demonstrated a significant ability to develop an upgraded device with affordable and portable biosensing capabilities.

Recent Progress in Biosensors for Detection of Tumor Biomarkers

Cancer is a leading cause of death worldwide, with an increasing mortality rate over the past years. The early detection of cancer contributes to early diagnosis and subsequent treatment. How to detect early cancer has become one of the hot research directions of cancer. Tumor biomarkers, biochemical parameters for reflecting cancer occurrence and progression have caused much attention in cancer early detection. Due to high sensitivity, convenience and low cost, biosensors have been largely developed to detect tumor biomarkers. This review describes the application of various biosensors in detecting tumor markers. Firstly, several typical tumor makers, such as neuron-specific enolase (NSE), carcinoembryonic antigen (CEA), prostate-specific antigen (PSA), squamous cell carcinoma antigen (SCCA), carbohydrate, antigen19-9 (CA19-9) and tumor suppressor p53 (TP53), which may be helpful for early cancer detection in the clinic, are briefly described. Then, various biosensors, mainly focusing on electrochemical biosensors, optical biosensors, photoelectrochemical biosensors, piezoelectric biosensors and aptamer sensors, are discussed. Specifically, the operation principles of biosensors, nanomaterials used in biosensors and the application of biosensors in tumor marker detection have been comprehensively reviewed and provided. Lastly, the challenges and prospects for developing effective biosensors for early cancer diagnosis are discussed.

Photoelectrochemical sandwich immunoassay of CYFRA21-1 based on In2O3/WO3 type-II heterojunction and CdS quantum dots-polydopamine nanospheres labeling

Using an In₂O₃/WO₃ type-II heterojunction modified fluorine-doped tin oxide (FTO) electrode as the photoanode and CdS quantum dots (QDs)-polydopamine nanospheres (PDA NSs) as the secondary antibody (Ab₂) label, the photoelectrochemistry (PEC) sandwich immunosensing of the lung cancer marker CYFRA21-1 was studied. WO₃ nanoplates were prepared by a hydrothermal method, In₂O₃ nanoporous spheres were prepared by a hydrothermal method followed by calcination, and the In₂O₃/WO₃ type-II heterojunction with high PEC activity was prepared by ultrasonic mixing and cast-coating. PDA NSs with a high surface area can be loaded with abundant Ab₂ molecules and many CdS QDs with an energy level well matched with the heterojunction, so the photocurrent signal can be amplified by the formation of a sandwich immunostructure. Through the simulation experiments of photoelectrode-modified chitosan films of varying thickness, the effective transport distance of photogenerated charges is preliminarily discussed. Under the optimized conditions, the photocurrent was linear with the common logarithm of CYFRA21-1 concentration from 100 fg mL^-1 to 50 ng mL^-1, with a limit of detection of 56 fg mL^-1 (S/N = 3). The immunoassay of CYFRA21-1 in human serum samples gave satisfactory recovery results.

Solanum tuberosum Leaf Extract Templated Synthesis of Co3O4 Nanoparticles for Electrochemical Sensor and Antibacterial Applications

Green synthesis of metal oxide nanoparticles (NPs) is a viable alternative methodology because of cost-effective and availability of environmentally friendly templates for desired application, which has attracted the attention of researchers in recent years. In the present study, Co3O4 NPs were synthesized in various volume ratios in the presence of Solanum tuberosum leaf extract as a template. The synthesized Co3O4 NPs were characterized by X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), surface area electron diffraction (SAED), UV-Vis diffuse reflectance spectroscopy (UV-DRS), and Fourier transform infrared (FTIR) spectroscopy. XRD analysis found that the average crystalline sizes for the 1 : 2, 1 : 1, and 2 : 1 volume ratios was 25.83, 21.05, and 27.98 nm, respectively. SEM-EDX and TEM analyses suggest that the green-synthesized Co3O4 NPs are spherical in shape without the presence of impurities. The band gap E g values of the 1 : 2, 1 : 1, and 2 : 1 volume ratios of Co3O4 NPs were found to be 1.83, 1.77, and 2.19 eV, respectively. FTIR analysis confirmed the presence of various bioactive ingredients within the leaf extract of Solanum tuberosum. Co3O4 NPs-modified electrodes showed better sensing capability towards ascorbic acid and citric acid due to enhanced electron transfer kinetics. Among three volume ratios (1 : 2, 1 : 1, and 2 : 1) of Co3O4 nanoelectrodes, 1 : 1 and 2 : 1 were identified as the best performing nanoelectrodes. This is possibly due to the high catalytic behavior and the more homogenized surface structure. Co3O4 (1 : 2) nanodrug showed the enhanced antibacterial activity (16 mm) towards S. aureus which is attributed to the formation of enhanced reactive oxygen species (ROS).

A sensitive photothermometric biosensor based on redox reaction-controlled nanoprobe conversion from Prussian blue to Prussian white

As a new low-cost photothermal nanoprobe, Prussian blue nanoparticles (PB NPs) have been demonstrated to have more potential in photothermometric-based point-of-care testing (POCT) application. However, most of the existing PB NP-based photothermometric sensors were constructed mainly relying on in situ generation of PB NPs or their combination with antigens and antibodies, therefore usually suffering from the inherent defects like complicated preparation and cumbersome surface process as well as high-cost modification. To break this limitation of PB NP-based photothermometric POCT, we proposed an ingenious redox reaction-controlled nanoprobe conversion strategy and successfully applied to photothermometric detection of ascorbate oxidase (AAO). In this design, the heat of PB NP photothermal system under 808-nm laser irradiation dramatically decreased with the addition of AA, due to a unique AA-induced Prussian blue to Prussian white (PB-to-PW) conversion. Upon AAO addition, the heat of reaction system increased because of the enzymatic catalytic reaction between AAO and AA, which led to a significant reduction of AA and resultantly inhibited PB-to-PW conversion. Such target-mediated nanoprobe conversion resulted in an obvious temperature change that could be easily detected by a common thermometer and exhibited good linear ranges from 0.25 to 14 mU/mL with a detection limit as low as 0.21 mU/mL for POCT analysis of AAO. This facile, convenient, and portable photothermometric sensing platform provides an innovative route for the design of PB NP nanoprobe-based photothermometric detection methods. A sensitive photothermometric AAO sensor based on a redox reaction-controlled nanoprobe conversion strategy from Prussian blue to Prussian white.