Carbon dots@Cu metal-organic frameworks hybrids for ratiometric fluorescent determination of pesticide thiophanate-methyl

Copper-based fluorescent nanozyme used to construct a ratiometric sensor for visual detection of thiophanate methyl

Although nanozyme has shown great potential in designing fluorescent assays for pesticide residue, most of them are based on single emission, thus affecting the detection accuracy. Herein, a copper-based fluorescent nanozyme (Cu-BH) synthesized with dual-ligand, integrating fluorescence and oxidase-mimic into one spherical nanomaterial, was used firstly to establish a ratiometric approach for visual detection of thiophanate methyl (TM). Cu-BH possesses excellent oxidase-like activities, triggering the oxidation of colorless o-phenylenediamine (OPD) into yellow luminescent products (oxOPD, λem = 564 nm). Besides, the ligand of 2-amino-1,4-benzene-dicarboxylic acid imparts Cu-BH blue fluorescence (λem = 425 nm), which is quenched by oxOPD via inner filtration effect (IFE). The introduction of TM can prevent not only the oxidase-like activity remarkably but also the intrinsic luminescence of Cu-BH slightly because of the complexation of TM with Cu2+. As a result, the fluorescence intensity at 564 nm and 425 nm presents a significant decrease and a slight increase, respectively, producing a ratiometric fluorescent signal (F425/F564). Therefore, a novel ratiometric fluorescent strategy has been proposed to detect TM ranging from 0.1 to 100 μM with detection limit of 0.03 μM (S/N = 3). Besides, visual detection of TM can be achieved by RGB reading with the assistance of smartphone owing to the color variation from yellow to blue. This fluorescent nanozyme-based ratiometric strategy provides a specific method for the detection of TM in food samples.

Synthesis of metal framework-modified carbon dots with super large stokes shift using Hami melon as a green precursor for detecting thiophanate-methyl residue in leafy vegetables

Consuming leafy vegetables with excessive thiophanate-methyl (TM) residue poses serious risks to human health. To realize rapidly and sensitively detecting TM in leafy vegetables, we developed a fluorescent probe based on zeolitic imidazolate framework-8-modified carbon dots using Hami melon as the green precursor (HM-CDs@ZIF-8). Meanwhile, the mechanism of HM-CDs@ZIF-8 for detecting TM was investigated and explained. The results of the performance tests showed that the prepared HM-CDs@ZIF-8 exhibited high sensitivity, excellent selectivity, robust anti-interference capability, reliable reproducibility and repeatability, and long-term stability. After optimization experiments, the fluorescence intensity of HM-CDs@ZIF-8 showed a strong linear correlation with the concentration of TM (0.00171-3.4239 mol/L) with a detection limit of 2.025 μmol/L. The HM-CDs@ZIF-8 was successfully applied to determine TM in spiked leafy vegetables with satisfactory recoveries of 96-105%. The relative standard deviations were in the range of 0.26-2.55%. The sensor has a promising application for detecting TM in leafy vegetables.

Sensitive colorimetric and fluorescence dual-mode detection of thiophanate-methyl based on spherical Fe3O4/GONRs composite nanozyme

Pesticide detection based on nanozyme is largely limited in terms of the variety of pesticides. Herein, a spherical and well-dispersed Fe3O4/graphene oxide nanoribbons (Fe3O4/GONRs) composite nanozyme was applied to firstly develop an enzyme-free and sensitive colorimetric and fluorescence dual-mode detection of thiophanate-methyl (TM). The synthesized Fe3O4/GONRs possess excellent dual enzyme-like activities (peroxidase and catalase) and can catalyze H2O2 to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into oxidized TMB (oxTMB). We found that Fe3O4/GONRs can adsorb TM through the synergistic effect of multiple forces, thereby inhibiting the catalytic activities of nanozyme. This inhibition can modulate the transformation of TMB to oxTMB, producing dual responses of absorbance decrease (oxTMB) and fluorescence enhancement (TMB). The limits of detection (LODs) of TM were 28.1 ng/mL (colorimetric) and 8.81 ng/mL (fluorescence), respectively. Moreover, the developed method with the recoveries of 94.8-100.8% also exhibited a good potential application in the detection of pesticides residues in water and food samples.

Fluorescent chemosensors facilitate the visualization of plant health and their living environment in sustainable agriculture

Globally, 91% of plant production encounters diverse environmental stresses that adversely affect their growth, leading to severe yield losses of 50-60%. In this case, monitoring the connection between the environment and plant health can balance population demands with environmental protection and resource distribution. Fluorescent chemosensors have shown great progress in monitoring the health and environment of plants due to their high sensitivity and biocompatibility. However, to date, no comprehensive analysis and systematic summary of fluorescent chemosensors used in monitoring the correlation between plant health and their environment have been reported. Thus, herein, we summarize the current fluorescent chemosensors ranging from their design strategies to applications in monitoring plant-environment interaction processes. First, we highlight the types of fluorescent chemosensors with design strategies to resolve the bottlenecks encountered in monitoring the health and living environment of plants. In addition, the applications of fluorescent small-molecule, nano and supramolecular chemosensors in the visualization of the health and living environment of plants are discussed. Finally, the major challenges and perspectives in this field are presented. This work will provide guidance for the design of efficient fluorescent chemosensors to monitor plant health, and then promote sustainable agricultural development.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Smartphone-assisted carbon dots fluorescent sensing platform for visual detection of Thiophanate-methyl in fruits and vegetables

Trimesic acid and o-phenylenediamine (OPD) were employed as precursors to synthesize yellow-green fluorescent carbon dots (Y-G-CDs) by solvothermal synthesis for the sensitive detection of Thiophanate-methyl (TM) in real agricultural products. The Y-G-CDs probe could specifically recognize the TM primarily through π-π stacking. Moreover, the fluorescence quenching of the probe was ultimately dominated by the PET effect, based on the interaction between the abundant carboxyl groups on the surface of the Y-G-CDs and the amino group of TM. A strong linear relationship between the fluorescence quenching of the probe and TM concentration in the range of 0-10 µmol/L was observed and the limit of detection (LOD) was calculated to be 50.7 nmol/L. Compared to the interference pesticides, the Y-G-CDs probe demonstrated exceptional selectivity toward TM, with satisfactory recoveries of 96.3 % - 104.2 % in spiked food samples. The Y-G-CDs probe enables simple pretreatment, cost-effective, and on-site detection of TM in fruits and vegetables with visual detection of the TM employing a smartphone-assisted sensing platform.

MOF-based Ag NPs/Co3O4 nanozyme for colorimetric detection of thiophanate-methyl based on analyte-enhanced sensing mechanism

Silver nanoparticles supported on metal-organic framework (ZIF-67)-derived Co3O4 nanostructures (Ag NPs/Co3O4) were synthesized via a facile in situ reduction strategy. The resulting materials exhibited pH-switchable peroxidase/catalase-like catalytic activity. Ag NP doping greatly enhanced the catalytic activity of Ag NPs/Co3O4 towards 3,3',5,5'-tetramethylbenzidine (TMB) oxidation and H2O2 decomposition which were 59 times (A652 of oxTMB) and 3 times (A240 of H2O2) higher than that of ZIF-67, respectively. Excitingly, thiophanate-methyl (TM) further enhanced the peroxidase-like activity of Ag NPs/Co3O4 nanozyme due to the formation of Ag(I) species in TM-Ag NPs/Co3O4 and generation of more radicals resulting from strong interaction between Ag NPs and TM. The TM-Ag NPs/Co3O4 nanozyme exhibited lower Km and higher Vmax values towards H2O2 when compared with Ag NPs/Co3O4 nanozyme. A simple, bioelement-free colorimetric TM detection method based on Ag NPs/Co3O4 nanozyme via analyte-enhanced sensing strategy was successfully established with high sensitivity and selectivity. Our study demonstrated that hybrid noble metal NPs/MOF-based nanozyme can be a class of promising artificial nanozyme in environmental and food safety applications.

A G-quadruplex-assisted target-responsive dual-mode aptasensor based on copper nanoclusters synthesized in situ in a DNA hydrogel for ultrasensitive detection of ochratoxin A

Developing ultrasensitive sensing platforms for trace ochratoxin A (OTA) in food safety is still challenging. Herein, we presented a novel dual-mode sensing strategy for fluorescence and colorimetric detection of OTA by combining the target-responsive hemin-encapsulated and copper nanoclusters (CuNCs) functionalized DNA hydrogel. Through simple assembly and in situ synthesis methods, fluorescence CuNCs are synthesized and modified on the 3D hydrophilic network structure of DNA cross-linked. OTA specifically recognized by Apt-linker can control the collapse of hydrogel, resulting in the fluorescence quenching of CuNCs and release of coated hemin. Interestingly, OTA could trigger Apt-linker conformational changes to form G-quadruplex structures, allowing the released hemin to form G-quadruplex/hemin DNAzyme via self-assembly. Fluorescence signal amplification could be achieved through further fluorescence quenching of CuNCs caused by DNAzyme-catalyzed hydrogen peroxide (H2O2) because of the peroxidase activity of DNAzyme. Simultaneously, DNAzyme could catalyze the H2O2-mediated oxidation of TMB to provide colorimetric signal. Thereafter, the DNA-CuNCs hydrogel exhibited low detection limits of 3.49 pg/mL in fluorescence mode and 0.25 ng/mL in colorimetric modality. Real sample analyses of foodstuffs showed satisfactory results, providing prospective potential for monitoring mycotoxin contaminant.

Design and application of dual-emission metal-organic framework-based ratiometric fluorescence sensors

Metal-organic frameworks (MOFs) are novel inorganic-organic hybridized crystals with a wide range of applications. In the last twenty years, fluorescence sensing based on MOFs has attracted much attention. MOFs can exhibit luminescence from metal nodes, ligands or introduced guests, which provides an excellent fluorescence response in sensing. However, single-signal emitting MOFs are susceptible to interference from concentration, environment, and excitation intensity, resulting in poor accuracy. To overcome the shortcomings, dual-emission MOF-based ratiometric fluorescence sensors have been proposed and rapidly developed. In this review, we first introduce the luminescence mechanisms, synthetic methods, and detection mechanisms of dual-emission MOFs, highlight the strategies for constructing ratiometric fluorescence sensors based on dual-emission MOFs, and classify them into three categories: intrinsic dual-emission and single-emission MOFs with luminescent guests, and non-emission MOFs with other luminescent materials. Then, we summarize the recent advances in dual-emission MOF-based ratiometric fluorescence sensors in various analytical industries. Finally, we discuss the current challenges and prospects for the future development of these sensors.

CuI-p-DPA coordination polymer isomers for "turn-on" fluorescence detection of thiophanate-methyl

Three copper iodide coordination polymer (CuI-p-DPA) isomers were prepared from the fluorescent organic ligand p-DPA and cuprous iodide (CuI) under different solvothermal conditions, which exhibited quenched fluorescence behaviors after forming coordination polymers (CPs). These CuI-p-DPA isomers showed discrepant fluorescence responses to thiophanate-methyl (TM). Among these CuI-p-DPA isomers, α-CuI-p-DPA exhibited the maximum fluorescence enhancement after its incubation with TM in aqueous solution. The fluorescence enhancement mechanism was that TM competed with the ligand p-DPA to coordinate with CuI clusters, and then α-CuI-p-DPA released p-DPA into the solution and induced fluorescence enhancement. The present detection method possesses the advantages of good selectivity, high sensitivity, short response time, and strong anti-interference ability with a linear range of 0.5-100 μM and a detection limit of 0.01 μM. This study not only reveals that the spatial structures of CPs play an important role in the fluorescence response ability, but also provide a new fluorescence signal-on analysis method to rapidly and sensitively determine the pesticide residue for TM.

Specific detection of fungicide thiophanate-methyl: A smartphone colorimetric sensor based on target-regulated oxidase-like activity of copper-doped carbon nanozyme

Nanozyme-based colorimetric assays have shown great potential in the rapid and sensitive determination of pesticide residue in environment. However, the non-specific enzyme inhibition makes the assays generally lack of selectivity. In this study, we proposed a colorimetric sensing platform for the specific detection of the agricultural fungicide thiophanate-methyl (TM) based on its distinctive inhibitory effect on the nanozyme activity. Since TM contains the symmetric ethylenediamine- and bisthiourea-like groups, it displays strong affinity to the metal site, leading to a loss of the catalytic activity. Accordingly, a Cu-doped carbon nanozyme with excellent oxidase-like properties was designed, and the oxidation process of chromogenic substrate is promoted by Cu-induced generation of reactive oxygen species. Interestingly, the nanozyme activity can be directly and strongly restrained by TM, rather than other probably coexistent pesticides. Consequently, the as-proposed analytical method exhibits specific response toward TM and good linear relationship in the range of 0.2-15 μg mL-1 with a low limit of detection of 0.04 μg mL-1 (S/N = 3). Besides, a smartphone-assisted rapid detection was achieved through identifying the RGB value of the chromogenic system. This work provides a new nanozyme inhibition strategy for the specific detection of TM in environmental sample.

Nanoscale carbon dot-embedded metal-organic framework for turn-on fluorescence detection of water in organic solvents

An easy-to-use, highly selective, and real-time organic solvent quality assessment is desirable to detect water contamination in organic solvents. Herein, a one-step procedure using ultrasound irradiation was used for encapsulating nanoscale carbon dots (CDs) into metal-organic framework-199 (HKUST-1) to form CDs@HKUST-1 composite. The CDs@HKUST-1 exhibited very weak fluorescence due to photo-induced electron transfer (PET) from the CDs to the Cu²⁺ centers, acting as a fluorescent sensor in its off-state. The designed material can detect and discriminate water from other organic solvents, driven by turn-on fluorescence. This highly sensitive sensing platform could be applied for the detection of water in ethanol, acetonitrile, and acetone with wide linear detection ranges of 0-70% v/v, 2-12% v/v, and 10-50% v/v and limits of detection of 0.70% v/v, 0.59% v/v, and 1.08% v/v, respectively. The detection mechanism is attributed to the interruption of the PET process due to the release of fluorescent CDs after treatment with water. A smartphone-based quantitative test was successfully developed to monitor the water content in organic solvents utilizing CDs@HKUST-1 and a phone color processing application, thus making it possible to develop an on-site, real time and easy-to-use sensor for water detection.

Ratiometric Sensing of Glyphosate in Water Using Dual Fluorescent Carbon Dots

Glyphosate is a broad-spectrum pesticide used in crops and is found in many products used by industry and consumers. Unfortunately, glyphosate has been shown to have some toxicity toward many organisms found in our ecosystems and has been reported to have carcinogenic effects on humans. Hence, there is a need to develop novel nanosensors that are more sensitive and facile and permit rapid detection. Current optical-based assays are limited as they rely on changes in signal intensity, which can be affected by multiple factors in the sample. Herein, we report the development of a dual emissive carbon dot (CD) system that can be used to optically detect glyphosate pesticides in water at different pH levels. The fluorescent CDs emit blue and red fluorescence, which we exploit as a ratiometric self-referencing assay. We observe red fluorescence quenching with increasing concentrations of glyphosate in the solution, ascribed to the interaction of the glyphosate pesticide with the CD surface. The blue fluorescence remains unaffected and serves as a reference in this ratiometric approach. Using fluorescence quenching assays, a ratiometric response is observed in the ppm range with detection limits as low as 0.03 ppm. Our CDs can be used to detect other pesticides and contaminants in water, as cost-effective and simple environmental nanosensors.

Rapid detection of the biomarker for cystinuria by a metal-organic framework fluorescent sensor

Arginine (Arg) is considered a valuable biomarker for various diseases, including cystinuria, and its concentration level holds significant implications for human health. To achieve the purposes of food evaluation and clinical diagnosis, it is imperative to develop a rapid and facile method for selective and sensitive determination of Arg. In this work, a novel fluorescent material (Ag/Eu/CDs@UiO-66) was synthesized by encapsulating carbon dots (CDs), Eu³⁺ and Ag ⁺ into UiO-66. This material can serve as a ratiometric fluorescent probe for detecting Arg. It exhibits a high sensitivity with a detection limit of 0.74 μM and a relatively broad linear range from 0-300 μM. After dispersing the composite Ag/Eu/CDs@UiO-66 in an Arg solution, the red emission of Eu³⁺ center at 613 nm was significantly enhanced, while the characteristic peak of CDs center at 440 nm remained unchanged. Therefore, a ratio fluorescence probe could be constructed based on the peak height ratio of the two emission peaks to achieve selective detection of Arg. In addition, the remarkable ratiometric luminescence response induced by Arg results in a significant color transition from blue to red under UV-lamp for Ag/Eu/CDs@UiO-66, which was convenient for visual analysis.

Highly dispersed Cu and Ni nano cluster sensor for ultrasensitive electrochemical detection of antiviral drug lamivudine

The accurate and rapid detection for the nucleoside reverse transcriptase inhibitor lamivudine (LAM, 3TC) in cellular systems is always a challenge in the clinic application. Here, a sensitive Cu and Ni nano cluster sensor for LAM is generated under hydrothermal conditions.The Cu and Ni atoms are highly dispersed and aggregated in the nanosized opening pore windows of the synthesized LTA zeolite, through the diatomic synergistic contribution of Cu and Ni and the enrichment of zeolitic channel pores. Using differential pulse voltammetry (DPV), the detection limit (LOD) of LAM at the potential (- 0.15 V) can reach 0.001 pM and the linear range is 0.002 pM-0.002 μM. Since the nano cluster is separated and restricted by the nanosized windows of the zeolite framework, the sensor provides high stability, good recovery (92.5-109%) and RSD (0.8-3.2%) in the analysis of tap water, RPMI 1640 medium, and rabbit serum. The Cu/Ni/LTA zeolite-modified glassy carbon electrode (Cu/Ni/LTA/GCE) exhibits excellent catalytic performance for LAM with high selectivity over potentially interfering agents. A sensitive Cu and Ni nano cluster sensor for LAM is generated in the hydrothermal condition that the Cu and Ni atoms are highly dispersed and aggregated in the nanosized opening pore windows of the as-synthesized LTA zeolite. Through the diatomic synergistic contribution of Cu and Ni and the enrichment of zeolitic channel pores, the observed limit of detection (LOD) can reach 0.001 pM under differential pulse voltammetry (DPV) method with a wide linear relationship to 0.002 μM.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers

Identification of trace level chemical species (drugs, pesticides, metal ions and biomarkers) plays key role in environmental monitoring. Recently, fluorescence assay has shown significant advances in detecting of trace level drugs, pesticides, metal ions and biomarkers in real samples. Ultra-small nanostructure materials (metal nanoclusters (NCs), quantum dots (QDs) and carbon dots (CDs)) have been integrated with fluorescence spectrometer for sensitive and selective analysis of trace level target analytes in various samples including environmental and biological samples. This review summarizes the properties of metal NCs and ligand chemistry for the fabrication of metal NCs. We also briefly summarized the synthetic routes for the preparation of QDs and CDs. Advances of ultra-small fluorescent nanosensors (NCs, QDs and CDs) for sensing of metal ions, drugs, pesticides and biomarkers in various sample matrices are briefly discussed. Additionally, we discuss the recent challenges and future perspectives of ultra-small materials as fluorescent sensors for assaying of wide variety of target analytes in real samples.

Red-emitting carbon dots aggregates-based fluorescent probe for monitoring Cu2

R-CDAs have been synthesized in a one-pot solvothermal procedure starting from 3,4-diaminobenzoic acid in an acidic medium. Transmission electron microscopy (TEM) revealed that R-CDAs nanoparticles exhibited a much larger diameter of 7.2-28.8 nm than traditional monodisperse carbon dots. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) revealed the presence of polar functional groups (hydroxyl, amino, carboxyl) on the surface of R-CDAs. Upon excitation with visible light (550 nm), R-CDAs emit stable, red fluorescence with a maximum at 610 nm. Under the optimum conditions, Cu²⁺ ions quench the fluorescence of this probe, and the signal is linear in a concentration range of copper ions between 5 and 600 nM with the detection limit of only 0.4 nM. Recoveries from 98.0 to 105.0% and relative standard deviations (RSD) from 2.8 to 4.5% have been obtained for detection of Cu²⁺ in real water samples. Furthermore, the R-CDAs fluorescent probe showed negligible cytotoxicity toward HeLa cells and good bioimaging ability, suggesting its potential applicability as a diagnostic tool in biomedicine.

Copper-Modified Double-Emission Carbon Dots for Rapid Detection of Thiophanate Methyl in Food

The detection of food safety and quality is very significant throughout the food supply. Stable dual-emission copper-modified fluorescent carbon dots (Cu-CDs) were successfully synthesized by a simple and environment-friendly hydrothermal, which was used for the real-time detection of pesticide residues in agricultural products. By optimizing the reaction conditions, Cu-CDs showed two emission peaks, with the highest fluorescence intensities at 375 and 450 nm. The structure, chemical composition and optical properties of Cu-CDs were investigated by XRD, TEM and IR. The results showed that thiophanate methyl (TM) could induce fluorescence quenching of Cu-CDs with no other ligands by the electron transfer through π-π stacking. The synchronous response of the dual-emission sensor enhanced the specificity of TM, which showed remarkable anti-interference capability. The fluorescence quenching degree of Cu-CDs had a good linear relationship with the TM concentration; the low detection limit for a pear was 0.75 μM, and for an apple, 0.78 μM. The recoveries in the fruit samples were 79.70–91.15% and 81.20–93.55%, respectively, and the relative standard deviations (RSDs) were less than 4.23% for the pear and less than 3.78% for the apple. Thus, our results indicate the feasibility and reliability of our methods in detecting pesticide residues in agricultural products.