Sensing performance and mechanism of carbon dots encapsulated into metal-organic frameworks

Ethylenediamine assist preparation of carbon dots with novel biomass for highly sensitive detection of levodopa

Levodopa (l-Dopa), a precursor drug for dopamine has been widely used to treat Parkinson's disease. However, excess accumulation of l-Dopa in the body may cause movement disorders and uncontrollable emotions. Therefore, it is vital to monitor l-Dopa levels in patients. In this study, a carbon dot (CD)-based fluorescence sensing system was developed for sensitive detection of l-Dopa. The CDs were prepared using a novel biomass, Pandanus amaryllifolius Roxb., as a carbon source via a simple hydrothermal method. Interestingly, it was found that ethylenediamine doping in the preparation system increased the quantum yield of CDs, as well as their fluorescence response sensitivity to l-Dopa. After optimizing the preparation and sensing conditions, the detection limit of l-Dopa decreased from 1.54 μM to 0.05 μM. A complete methodological validation was conducted and the probe was successfully applied to the determination of l-Dopa in fetal bovine serum with excellent precision (RSD ≤ 2.99%) and recoveries of 88.50-99.71%. Overall, this work provides an effective strategy for the regulation of properties of CDs derived from biomass and an innovative method for clinical l-Dopa monitoring.

Effect of carbon dot-doped Ti-MOF on CMC/Agar film and active packaging application on storage quality of fruits

Ti-metal organic framework (Ti-MOF) doped with carbon dots (CDs) with enhanced antibacterial potential was synthesized using solvothermal-assisted mechanical stirring and used for the fabrication of CMC/Agar-based active packaging films. The incorporation of CD@Ti-MOF not only improved the tensile strength of the CMC/Agar film by 17.4% but also exhibited strong antioxidant activity with 100% of ABTS and 57.8% of DPPH radical scavenging using 0.64 cm2/mL of CMC/Agar/CD@Ti-MOF film. Furthermore, water vapor permeability, oxygen permeability, and ultraviolet light-blocking ability (95.7% of UV-B and 84.7% of UV-A) were improved significantly. The CMC/Agar/CD@Ti-MOF film showed strong antibacterial activity and could inhibit the progress of E. coli up to 8.2 Log CFU/mL and completely stopped the growth of L.monocytogenes after 12 h of incubation. Additionally, CMC/Agar/CD@Ti-MOF film extended the shelf life of cherry tomatoes preserved at 4 °C and delayed the quality degradation, maintaining the visual aspects of the packaging.

Vacuum-Boosting Precise Synthetic Control of Highly Bright Solid-State Carbon Quantum Dots Enables Efficient Light Emitting Diodes

Carbon quantum dots (C-dots) have emerged as efficient fluorescent materials for solid-state lighting devices. However, it is still a challenge to obtain highly bright solid-state C-dots because of the aggregation caused quenching. Compared to the encapsulation of as-prepared C-dots in matrices, one-step preparation of C-dots/matrix complex is a good method to obtain highly bright solid-state C-dots, which is still quite limited. Here, an efficient and controllable vacuum-boosting gradient heating approach is demonstrated for in situ synthesis of a stable and efficient C-dots/matrix complex. The addition of boric acid strongly bonded with urea, promoting the selectivity of the reaction between citric acid and urea. Benefiting from the high reaction selectivity and spatial-confinement growth of C-dots in porous matrices, in situ synthesize C-dots bonded can synthesized dominantly with a crosslinked octa-cyclic compound, biuret and cyanuric acid (triuret). The obtained C-dots/matrix complex exhibited bright green emission with a quantum yield as high as 90% and excellent thermal and photo stability. As a proof-of-concept, the as-prepared C-dots are used for the fabrication of white light-emitting diodes (LEDs) with a color rendering index of 84 and luminous efficiency of 88.14 lm W-1, showing great potential for applications in LEDs.

Construction of CDs@β-CD@CCM ratiometric fluorescence probe for FRET-based ClO--sensing

β-Cyclodextrin (β-CD)-functionalized carbon quantum dots (CDs) loaded with curcumin (CCM) were used for ClO-sensing with high sensitivity and selectivity. This fluorescence resonance energy transfer (FRET)-based sensor was created through attaching CCM to the CDs via β-CD linker. CCM could get into the interior of β-CD triggering the FRET from CDs to CCM, providing an 'off' state of the CDs. However, the effect of FRET was weakened by the ClO-, because the o-methoxyphenol structure from CCM was oxidized to be benzoquinone. The fluorescence intensity of CDs@β-CD@CCM at 440 nm can be heightened and 520 nm from CCM can decrease along with the increased ClO-. Therefore, a ratiometric fluorescence probe for ClO-sensing is successfully constructed. It conforms to a polynomial curve equation which is I440/I520= -0.0268 + 0.0315 CClO-+ 0.0055[CClO-]2(R2= 0.9958) between 0 and 18.4μM ClO-. Furthermore, we also obtain excellent results using this spectrophotometric method for ClO--sensing in pure water and commercial disinfectants, which afford potential in the environment monitoring area. We expect this sensing platform could be helpful in other analogous probes in relevant fields.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Emerging trends in CDs@hydrogels composites: from materials to applications

Carbon dots (CDs) are nanoscale carbon materials with unique optical properties and biocompatibility. Their applications are limited by their tendency to aggregate or oxidize in aqueous environments. Turning weakness to strengths, CDs can be incorporated with hydrogels, which are three-dimensional networks of crosslinked polymers that can retain large amounts of water. Hydrogels can provide a stable and tunable matrix for CDs, enhancing their fluorescence, stability, and functionality. CDs@hydrogels, known for their ease of synthesis, strong binding capabilities, and rich surface functional groups, have emerged as promising composite materials. In this review, recent advances in the synthesis and characterization of CDs@hydrogels, composite materials composed of CDs and various types of natural or synthetic hydrogels, are summarized. The potential applications of CDs@hydrogels in fluorescence sensing, adsorption, drug delivery, antibacterial activity, flexible electronics, and energy storage are also highlighted. The current challenges and future prospects of CDs@hydrogels systems for the novel functional materials are discussed.

A dual-responsive RhB-doped MOF probe for simultaneous recognition of Cu2+ and Fe3

Based on the dual response of RhB@UiO-67 (1:6) to Cu2+ and Fe3+, a proportional fluorescent probe with (I392/I581) as the output signal was developed to recognize Cu2+ and Fe3+. Developing highly sensitive and selective trace metal ions probes is crucial to human health and ecological sustainability. In this work, a series of ratio fluorescent probes (RhB@UiO-67) were successfully synthesized using a one-pot method to enable fluorescence sensing of Cu2+ and Fe3+ at low concentrations. The proportional fluorescent probe RhB@UiO-67 (1:6) exhibited simultaneous quenching of Cu2+ and Fe3+, which was found to be of interest. Furthermore, the limits of detection (LODs) for Cu2+ and Fe3+ were determined to be 2.76 μM and 0.76 μM, respectively, for RhB@UiO-67 (1:6). These values were significantly superior to those reported for previous sensors, indicating the probe's effectiveness in detecting Cu2+ and Fe3+ in an ethanol medium. Additionally, RhB@UiO-67 (1:6) demonstrated exceptional immunity and reproducibility towards Cu2+ and Fe3+. The observed fluorescence quenching of Cu2+ and Fe3+ was primarily attributed to the mechanisms of fluorescence resonance energy transfer (FRET), photoinduced electron transfer (PET), and competitive absorption (CA). This work establishes a valuable foundation for the future study and utilization of Cu2+ and Fe3+ sensing technologies.

Development of innovative active packaging films using gelatin/pullulan-based composites incorporated with cinnamon essential oil-loaded metal-organic frameworks for meat preservation

This study aimed to investigate the effect of cinnamon essential oil (CEO)-loaded metal-organic frameworks (CEO@MOF) on the properties of gelatin/pullulan (Gel/Pull)-based composite films (Gel/Pull-based films). The incorporation of CEO@MOF into Gel/Pull-based films demonstrated significant antimicrobial activity against S. aureus, S. enterica, E. coli, and L. monocytogenes. Additionally, CEO@MOF integrated film exhibited a 98.16 % ABTS radical scavenging, with no significant change in the mechanical properties of the neat Gel/Pull film. The UV blocking efficiency of the composite films increased significantly from 81.38 to 99.56 % at 280 nm with the addition of 3 wt% CEO@MOF. Additionally, Gel/Pull/CEO@MOF films effectively extended the shelf life of meat preserved at 4 °C by reducing moisture loss by 3.35 %, maintaining the pH within the threshold limit (6.2), and inhibiting bacterial growth by 99.9 %. These results propose that CEO@MOF has significant potential as an effective additive in active packaging to improve shelf life and food safety.

Ratiometric fluorescence detection of dopamine based on copper nanoclusters and carbon dots

Nanoclusters for fluorescence detection are generally comprised of rare and expensive noble metals, and the nanoclusters based on more affordable transition metal have attracted increasing attention. This study designed a ratiometric fluorescent probe to detect dopamine (DA), an important neurotransmitter. With carbon dots encapsulated within silica (CDs@SiO2) as the reference, the emitted reference signal was almost unchanged due to the protection of inert silicon shell. Meanwhile, copper nanoclusters modified with 3-aminophenyl boronic acid (APBA-GSH-CuNCs) provided the sensing signal, in which the phenylboric acid could specifically recognize the cis-diol structure of DA, and caused the fluorescence quenching by photoinduced electron transfer. This dual emission ratiometric fluorescent probe exhibited high sensitivity and anti-interference, and was able to selectively responded to DA with a linear range of 0-1.4 mM, the detection limit of 5.6 nM, and the sensitivity of 815 mM-1. Furthermore, the probe successfully detected DA in human serum samples, yielding recoveries ranging from 92.5% to 102.7%. Overall, this study highlights the promising potential of this ratiometric probe for detecting DA.

Highly sensitive ratiometric fluorescence detection of tetracycline residues in food samples based on Eu/Zr-MOF

The development of a simple, rapid, and sensitive method for monitoring antibiotic residues is crucial for maintaining food safety. Herein, a ratiometric fluorescence probe based on bimetallic organic framework (Eu/Zr-MOF) was developed for the detection of tetracycline (TC). The Eu/Zr-MOF was synthesized by the coordination of Eu3+ and Zr4+ with 2-APDC, which exhibited a grape-like cluster morphology and dual-emitting fluorescence at 430 nm/616 nm. Based on the internal filtering effect (IFE), significant fluorescence quenching was observed at 430 nm, whereas only slight changes occurred at 616 nm. The ratiometric sensing offered two broad linear ranges (0.5-8 μg/mL; 10-60 μg/mL) and a low detection limit (26.7 ng/mL). The proposed method was applied to the determination of TC in pork and water samples. Fluorescent sensors have the advantages of simple design, fast response, and high sensitivity, thus providing a promising means for evaluating the safety of food contaminated with TC.

Fabrication of a bifunctional fluorescent chiral composite based on magnetic Fe3O4/chiral carbon dots@hierarchical porous metal-organic framework

Considering the selective pharmacological activity and ecotoxicity of chiral drugs, the development of chiral materials with the dual functions of enantiomeric recognition and adsorption is of great significance. Herein, a novel bifunctional chiral composite (Fe3O4/CCDs@HP-ZIF-8) which does not contain expensive and rare fluorescent chiral ligands or metal ions, was constructed for the first time by encapsulating chiral carbon dots (CCDs) and magnetic Fe3O4 nanoparticles into hierarchical porous metal-organic frameworks (HP-MOFs). Fe3O4/CCDs@HP-ZIF-8, which integrates fluorescent chiral property, magnetism, and hierarchical porosity, shows enormous potential in enantiomeric recognition and adsorption. Fluorescence detection results demonstrate that Fe3O4/CCDs@HP-ZIF-8 presents different fluorescence quenching for naproxen enantiomers. The limits of detection are determined to be 0.05 μM for S-naproxen (S-Nap) and 0.30 μM for R-naproxen (R-Nap), respectively. Furthermore, the isothermal, kinetic, and thermodynamic adsorption behaviors of Fe3O4/CCDs@HP-ZIF-8 to naproxen enantiomers were systematically studied. Due to its hierarchical porosity, the composite exhibits higher adsorption capacity to naproxen enantiomers compared to the non-hierarchical porous composite. Studies of enantiomeric recognition and adsorption mechanisms affirm that the synergistic effect of multiple mechanisms exists between Fe3O4/CCDs@HP-ZIF-8 and naproxen enantiomers. Finally, the satisfactory recoveries and relative standard deviations in the actual sample assays demonstrate the practicality of Fe3O4/CCDs@HP-ZIF-8 for S-Nap detection. This non-destructive functionalization method creates an innovative pathway for developing advanced multifunctional chiral materials, holding great promise for enantiomeric recognition and adsorption.

An upconversion nanosensor with phenolic-like functionality for accurate identification of chlorpyrifos in grapes

The inappropriate use of the organophosphorus pesticide chlorpyrifos (CPF) in agricultural production could be harmful to the environment and non-target organisms. Here, we prepared a nano-fluorescent probe with phenolic function based on covalently coupled rhodamine derivatives (RDP) of upconverted nano-particles (UCNPs) for trace detection of chlorpyrifos. Due to the fluorescence resonance energy transfer (FRET) effect in the system, the fluorescence of UCNPs is quenched by RDP. The phenolic-functional RDP is converted to the spironolactone form when it captures chlorpyrifos. This structural shift prevents the FRET effect in the system and allows the fluorescence of UCNPs to be restored. In addition, the 980 nm excitement conditions of UCNPs will also avoid interference from non-target fluorescent backgrounds. This work has obvious advantages in terms of selectivity and sensitivity, which can be widely applied to the rapid analysis of chlorpyrifos residues in food samples.

Novel sensor for the determination of CA 15-3 in serum of breast cancer patients based on Fe-gallic acid complex doped in modified cellulose polymer thin films

Fe-gallic acid MOF embedded in an epoxy methyl cellulose polymer (CMC) thin film was synthesized and characterized by different micro-analytical tools such as: FE-SEM/EDX, XPS analysis, XRD analysis, FT-IR, and fluorescence spectroscopy. Fe-gallic acid MOF doped in a stable CMC polymer thin film is used as a novel sensor to identify CA 15-3 in the sera of patients suffering breast malignancy. The presence of appropriate functional groups in aqueous CA 15-3 solutions enables it to interact with the Fe-gallic acid MOF embedded in the thin film. The Fe-gallic acid MOF was found to absorb energy at 350 nm (λex) and emits radiation at 439 nm which was specifically quenched in the presence of CA 15-3 over a working concentration range of 0.05-570 U mL-1. In contrast to other CA 15-3 detection methods which suffered from electronic noise, interference and slowness, the Fe-gallic acid MOF proved its sensitivity as an economic, stable and reliable probe for the detection and determination of CA 15-3 in patients' serum samples with a detection limit of 0.01 U mL-1 at pH 7.2.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.