Development and evaluation of a rapid recombinase polymerase amplification assay for the detection of human enterovirus 71

Spherical Nucleic Acid Probes on Floating-Gate Field-Effect Transistor Biosensors for Attomolar-Level Analyte Detection

Field-effect transistor (FET) sensors are attractive for the label-free detection of target biomolecules, offering ultrahigh sensitivity and a rapid response. However, conventional methods for modifying biomolecular probes on sensors often involve intricate and time-consuming procedures that require specialized training. Herein, we propose a simple and versatile approach to functionalize floating-gate (FG) FET sensors by exploiting the strong binding ability of polyvalent interactions and the three-dimensional structure of densely functionalized spherical nucleic acids (SNAs). Crucially, the SNAs can be easily deposited onto a dielectric layer under mild conditions, ensuring stable immobilization of the probes. Further, the SNAs show efficient and robust immobilization on various dielectric layers including Y2O3, Ta2O5, and HfO2, forming conjugates that resist denaturation by various agents. By modifying the DNA sequence within the SNAs, we achieved highly sensitive FG-FET biosensors for DNA, adenosine triphosphate, and viral nucleic acids at the attomolar level. For clinical samples detection, unamplified enterovirus 71 RNA at levels as low as 0.13 copies μL-1 was detected within 100 s. Moreover, the sensor attained 100% accuracy for analyte detection in both positive and negative samples. Our findings provide a general and simple method for fabricating FET-based biochemical sensors and demonstrate that the SNA-modified FG-FET biosensor is a versatile and reliable integrated platform for ultrasensitive biomarker detection.

Detection Methods for Foodborne Viruses: Current State-of-Art and Future Perspectives

Foodborne viruses have been recognized as important threats to food safety and human health. Rapid and accurate detection is one of the most crucial measures for food safety control. With the development of biology, chemistry, nanoscience, and related interdisciplines, detection strategies have been devised and advanced continuously. This review mainly focuses on the progress of detection methods for foodborne viruses. The current detection methods for foodborne viruses are summarized, including traditional electron microscopy and cultural isolation, immunoassay, molecular technology, biosensors, and newly emerging CRISPR/Cas-based detection technology. Furthermore, a comparison of the detection methods was objectively discussed. This review provides a comprehensive account of foodborne virus detection methods from fundamentals to state-of-the-art and illustrates the advantages and disadvantages of the current methods and proposes the future trends and directions for foodborne virus detection. It is hoped that this review can update current knowledge and present blueprints in order to accelerate futuristic development.

Recent Developments in Isothermal Amplification Methods for the Detection of Foodborne Viruses

Foodborne and enteric viruses continue to impose a significant public health and economic burden globally. As many of these viruses are highly transmissible, the ability to detect them portably, sensitively, and rapidly is critical to reduce their spread. Although still considered a gold standard for detection of these viruses, real time polymerase chain reaction (PCR)-based technologies have limitations such as limited portability, need for extensive sample processing/extraction, and long time to result. In particular, the limitations related to the susceptibility of real time PCR methods to potential inhibitory substances present in food and environmental samples is a continuing challenge, as the need for extensive nucleic acid purification prior to their use compromises the portability and rapidity of such methods. Isothermal amplification methods have been the subject of much investigation for these viruses, as these techniques have been found to be comparable to or better than established PCR-based methods in portability, sensitivity, specificity, rapidity, and simplicity of sample processing. The purpose of this review is to survey and compare reports of these isothermal amplification methods developed for foodborne and enteric viruses, with a special focus on the performance of these methods in the presence of complex matrices.

Development and comparative evaluation of real-time PCR and real-time RPA assays for detection of tilapia lake virus

Tilapia lake virus (TiLV) is a newly emerged pathogen responsible for high mortality and economic losses in the global tilapia industry. Early and accurate diagnosis is an important priority for TiLV disease control. In order to evaluate the methodology in the molecular diagnosis of TiLV, we compared newly developed quantitative real-time PCR (qPCR) and real-time recombinase polymerase amplification (real-time RPA) assays regarding their sensitivities, specificities and detection effect on clinical samples. Real-time RPA amplified the target pathogen in less than 30 min at 39 °C with a detection limit of 620 copies, while qPCR required about 60 min with a detection limit of 62 copies. Both assays were specific for TiLV and there were no cross-reactions observed with other common fish pathogens. The assays were validated using 35 tissue samples from clinically infected and 60 from artificially infected animals. The sensitivities for the real-time RPA and qPCR assays were 93.33 and 100%, respectively, and the specificity was 100% for both. Both methods have their advantages and can play their roles in different situations. The qPCR is more suitable for quantitative analysis and accurate detection of TiLV in a diagnostic laboratory, whereas real-time RPA is more suitable for the diagnosis of clinical diseases and preliminary screening for TiLV infection in poorly equipped laboratories as well as in fish farms.

Isothermal haRPA detection of blaCTX-M in bacterial isolates from water samples and comparison with qPCR

Antibiotic resistant bacteria complicate infection treatment worldwide. Rapid and inexpensive detection of the current occurrence of antibiotic resistant bacteria in surface and irrigation water as well as treated wastewater is essential to minimize exposure and further spread. To reduce cost and analysis time compared to current qPCR (quantitative polymerase chain reaction), isothermal nucleic acid amplification tests are promising bioanalytical methods which can be integrated in simplified molecular biological detection systems. This study establishes heterogeneous asymmetric recombinase polymerase amplification (haRPA) for the detection of antibiotic resistance genes in water. After DNA extraction of bacteria cultivated from water, the target DNA for bla_CTX-M cluster 1 was amplified at 39 °C for 40 min on a microfluidic DNA chip. The amplified DNA on each spot was quantified by a flow-based chemiluminescence reaction. Even though slightly less sensitive than conventional qPCR, the haRPA method was successful in identifying the bla_CTX-M cluster 1 in bacterial isolates with a limit of detection of 0.013 ng μL^-1. In a proof-of-principle study, 37 bacterial isolates from environmental water samples were classified according to bla_CTX-M cluster 1 occurrence and gave 100% agreement in cross-reference with PCR. Importantly, haRPA allows for a quick in-field monitoring at low incubation temperatures and by an easy visual readout. This study paves the path to establish haRPA as a quick on-site monitoring option for antibiotic resistance gene occurrence without the need for a thermal cycling device or long data processing.

Applicability of duplex real time and lateral flow strip reverse-transcription recombinase aided amplification assays for the detection of Enterovirus 71 and Coxsackievirus A16

BACKGROUND

Enterovirus 71 (EV71) and coxsackievirus A16 (CA16) are the two main etiological agents of Hand, Foot and Mouth Disease (HFMD). Simple and rapid detection of EV71 and CA16 is critical in resource-limited settings.

METHODS

Duplex real time reverse-transcription recombinase aided amplification (RT-RAA) assays incorporating competitive internal amplification controls (IAC) and visible RT-RAA assays combined with lateral flow strip (LFS) for detection of EV71 and CA16 were developed respectively. Duplex real time RT-RAA assays were performed at 42 °C within 30 min using a portable real-time fluorescence detector, while LFS RT-RAA assays were performed at 42 °C within 30 min in an incubator. Recombinant plasmids containing conserved VP1 genes were used to analyze the sensitivities of these two methods. A total of 445 clinical specimens from patients who were suspected of being infected with HFMD were used to evaluate the performance of the assays.

RESULTS

The limit of detection (LoD) of the duplex real time RT-RAA for EV71 and CA16 was 47 copies and 38 copies per reaction, respectively. The LoD of the LFS RT-RAA for EV71 and CA16 were both 91 copies per reaction. There was no cross reactivity with other enteroviruses. Compared to reverse transcription-quantitative PCR (RT-qPCR), the clinical diagnostic sensitivities of the duplex real time RT-RAA assay were 92.3% for EV71 and 99.0% for CA16, and the clinical diagnostic specificities were 99.7 and 100%, respectively. The clinical diagnostic sensitivities of the LFS RT-RAA assay were 90.1% for EV71 and 94.9% for CA16, and the clinical diagnostic specificities were 99.7 and 100%, respectively.

CONCLUSIONS

The developed duplex real time RT-RAA and LFS RT-RAA assays for detection of EV71 and CA16 are potentially suitable in primary clinical settings.

Rapid and sensitive detection of Anaplasma phagocytophilum using a newly developed recombinase polymerase amplification assay

Anaplasma phagocytophilum, the bacterial pathogen responsible for tick-borne fever and human granulocytic anaplasmosis, can seriously affect the health of humans and a wide range of other mammals. In this study, we developed a recombinase polymerase amplification (RPA) assay to detect A. phagocytophilum in clinical samples. Following alignment of the relevant DNA sequences, a pair of specific primers based on the 16S rRNA gene was designed to specifically detect A. phagocytophilum. The assay was performed at a constant temperature of 38 °C for 30 min, with a final primer concentration of 0.4 μM. The specificity of the primers was confirmed when DNA from A. phagocytophilum was used as the positive control, and DNA from other related pathogens were used as the negative controls, with ddH₂O acting as the blank control. The results showed that the primers did not cross-react with DNA from the other related pathogens. The assay's detection limit was 1.77 × 10^-5 ng/μl, a 10 × higher sensitivity level than that determined for nested PCR. The RPA assay's performance was evaluated using 44 clinical samples, and the prevalence results for A. phagocytophilum were found to not differ significantly between the RPA assay and the nested PCR. Thus, we have developed a specific, sensitive, rapid and cost-effective RPA method, requiring only a water bath, for the detection of A. phagocytophilum. The assay should be especially useful in resource-limited areas where access to laboratory equipment is limited.

Review: a comprehensive summary of a decade development of the recombinase polymerase amplification

RPA is a versatile complement or replacement of PCR, and now is stepping into practice.