Secondary structure of food proteins by Fourier transform spectroscopy in the mid-infrared region

Encapsulation of Lactiplantibacillus plantarum with casein-gellan gum emulsions to enhance its storage, pasteurization, and gastrointestinal survival

Probiotics serve a very important role in human health. However, probiotics have poor stability during processing, storage, and gastrointestinal digestion. The gellan gum (GG) is less susceptible to enzymatic degradation and resistant to thermal and acidic environments. This study investigated the effect of casein (CS)-GG emulsions to encapsulate Lactiplantibacillus plantarum CICC 6002 (L. plantarum CICC 6002) on its storage stability, thermal stability, and gastrointestinal digestion. L. plantarum CICC 6002 was suspended in palm oil and emulsions were prepared using CS or CS-GG complexes. We found the CS-GG emulsions improved the viability of L. plantarum CICC 6002 after storage, pasteurization, and digestion compared to the CS emulsions. In addition, we investigated the influence of the gellan gum concentration on emulsion stability, and the optimal stability was observed in the emulsion prepared by CS-0.8% GG complex. This study provided a new strategy for the protection of probiotics based on CS-GG delivery system.

Machine learning approach for high-throughput phenolic antioxidant screening in black Rice germplasm collection based on surface FTIR

Pigmented rice contains beneficial phenolic antioxidants but analysing them across germplasm collections is laborious and time-consuming. Here we utilised rapid surface Fourier transform infrared (FTIR) spectroscopy and machine learning algorithms (ML) to predict and classify polyphenolic antioxidants. Total phenolics, flavonoids, anthocyanins, and proanthocyanidins were quantified biochemically from 270 diverse global coloured rice collection and attenuated total reflectance (ATR) FTIR spectra were obtained by scanning whole grain surfaces at 800-4000 cm-1. Five ML classification models were optimised using the biochemical and spectral data which performed predictions with 93.5%-100% accuracy. Random Forest and Support Vector Machine models identified key FTIR peaks linked to flavonols, flavones and anthocyanins as important model predictors. This research successfully established direct and non-destructive surface chemistry spectroscopy of the aleurone layer of pigmented rice integrated with ML models as a viable high-throughput platform to accelerate the analysis and profiling of nutritionally valuable coloured rice varieties.

Oil-water interfacial behaviour of different caseins and stability of emulsions: Effect of micelle content and caseins concentrations

This study aimed to investigate the interfacial behaviour of caseins in different micelle content and its effect on the stability of emulsions, including micellar casein concentrate (MCN), calcium caseinate (CaC) and sodium caseinate (NaC). Results revealed that at high protein concentrations (0.5 %-2.5 %), MCN, CaC and NaC exhibited similar interfacial behaviour as well as unfolding rate constants (k 1 ) of 3.11-3.41 × 10-4 (s-1), 2.96-3.35 × 10-4 (s-1) and 2.75-3.27 × 10-4 (s-1), respectively. The interfacial layer formed was dominated by non-micelles, and microscopic images revealed the thickness of the interfacial layer to be 10-20 nm. By contrast, at low concentrations, the differences in the slope of E-π curves and k 1 indicated that the micelle content of casein affects protein interfacial behaviour and properties and that micellar casein is involved in the formation of the interfacial layer. The formation of large numbers of droplets during emulsion preparation results in a similar low concentration environment. Cryo-TEM showed adsorption of micellar casein in all three casein-stabilised emulsions, and the amount of adsorption was proportional to the micelle content. NaC has faster adsorption and rearrangement rates due to fewer micelles and more non-micelles, so that NaC forms smaller droplets and more stable emulsions than those formed by MCN and CaC within the range of 0.5 % to 2.0 %.

Production and physico-chemical characterization of nano-sized collagen from equine tendon

In recent years, significant academic and commercial interest has focused on collagen derived from horse tendons, with potential applications across diverse sectors such as medicine, pharmaceuticals, and cosmetics. Nano collagen, with its enhanced wound penetration, improved cell contact, and heightened cellular regeneration and repair capabilities due to its high surface area, holds promise for a wide range of applications. In this study, we present a novel method for producing nano collagen from the equine tendon. Our approach is characterized by its speed, affordability, simplicity and environmentally friendly nature, with precise temperature-control to prevent collagen denaturation. We conducted a comprehensive characterization of the obtained samples, including assessments of morphology, chemical and thermal properties, particle size distribution and biocompatibility. Importantly, our results indicate improvements in thermal stability, and surface roughness of nano collagen, while preserving its molecular weight. These advancements expand the potential applications of nano collagen in various fields.

Biophysical insights into sugar-dependent medium acidification promoting YfaL protein-mediated Escherichia coli self-aggregation, biofilm formation and acid stress resistance

The ability of bacteria to interact with their environment is crucial to form aggregates and biofilms, and develop a collective stress resistance behavior. Despite its environmental and medical importance, bacterial aggregation is poorly understood and mediated by few known adhesion structures. Here, we identified a new role for a surface-exposed Escherichia coli protein, YfaL, which can self-recognize and induce bacterial autoaggregation. This process occurs only under acidic conditions generated during E. coli growth in the presence of fermentable sugars. These findings were supported by electrokinetic and atomic force spectroscopy measurements, which revealed changes in the electrostatic, hydrophobic, and structural properties of YfaL-decorated cell surface upon sugar consumption. Furthermore, YfaL-mediated autoaggregation promotes biofilm formation and enhances E. coli resistance to acid stress. The prevalence and conservation of YfaL in environmental and clinical E. coli suggest strong evolutionary selection for its function inside or outside the host. Overall, our results emphasize the importance of environmental parameters such as low pH as physicochemical cues influencing bacterial adhesion and aggregation, affecting E. coli and potentially other bacteria's resistance to environmental stress.

Controlled ethanol-mediated polyphenol removal from sunflower meal: Impact on physicochemical, structural, flow-behavior, and functional characteristics of isolated proteins

BACKGROUND

Polyphenols present in sunflower meal act on sunflower proteins by reacting directly with their structures and thus influencing their purity, solubility, crystallinity, and functionality. However, the effect on these properties of varying concentrations of ethanol used in dephenolization has yet to be explored. The present study aimed to explore the impact of dephenolization using varying ethanol concentrations (60%, 70%, 80%, and 90%) on the physicochemical, color, thermal, structural, functional, and flow behavior of protein isolates extracted from sunflower meal.

RESULTS

Protein isolates originating from meals that were dephenolized using higher ethanol concentrations exhibited a protein content of 836.10 g kg-1. As the concentration of ethanol increased, a reduction in crystallinity was observed from 24% to 14.15%. Fourier transform infrared (FTIR) spectroscopy revealed marked shifts in major peaks within the 1600 to 1700 cm-1 wavelength range, indicating significant structural and conformational changes. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) results demonstrated that dephenolization caused decline in molecular weight ranging from 25 kDa to 60 kDa. Dephenolization induced significant changes in surface morphology resulting in more heterogeneous and disordered surfaces as indicated by field emission-scanning electron microscopy (FE-SEM) micrographs. Overall improvement in the functional properties was observed, with an increase in solubility from 15.20% to 22.03%. Improvement in the flow behavior with an increase in porosity from 38% to 60% was also observed, due to dephenolization.

CONCLUSION

Dephenolization using 90% ethanol induced structural changes that enhanced physicochemical and functional characteristics of sunflower protein isolates by improving purity and solubility, reducing crystallinity, and increasing flow behavior. © 2024 Society of Chemical Industry.

Influence of electrohydrodynamics on the drying characteristics, microstructure and volatile composition of apricot abalone mushroom (Pleurotus eryngii)

The study explored the use of current fluid dynamics drying technology for apricot abalone mushroom, examining how different output voltages (15, 25, and 35 kV) affected drying characteristics, microstructure, and volatile components. Comparisons were made with samples dried using hot air drying (HAD) and natural air drying (AD). Results revealed that HAD had the fastest drying rate at 0.29664(g·h-1). However, apricot abalone mushroom treated with electrohydrodynamic drying (EHD) maintained a color closer to fresh samples, exhibited a 21% increase in the ordered structure of protein secondary structure, a 12.5-fold increase in bound water content, and the most stable cell structure compared to HAD and AD treatments. A total of 83 volatile organic compounds were identified in the apricot abalone mushroom, with alcohols and aldehydes being the most prominent in terms of threshold and relative content, peaking in the 35 kV treatment group. These findings provide both experimental and theoretical insights into applying current fluid dynamics for drying apricot abalone mushroom.

Improvement of branched-chain amino acid production by isolated high-producing protease from Bacillus amyloliquefaciens NY130 on isolated soy/whey proteins and their muscle cell protection

Branched-chain amino acids (BCAAs) are vital components of human and animal nutrition that contribute to the building blocks of proteins. In this study, 170 protease-producing strains were isolated and screened from soy-fermented foods. Bacillus amyloliquefaciens NY130 was obtained from Cheonggukjang with high production of BCAAs. Optimal production of protease from B. amyloliquefaciens NY130 (protease NY130) was achieved at 42 °C and pH 6.0 for 21 h. It was purified and determined as 27- and 40 kDa. Protease NY130 showed maximum activity at pH 9.0 and 45 °C with Km value of 10.95 mg for ISP and 1.69 mg for WPI. Protease-treated ISP and WPI showed increased sweetness and saltiness via electronic tongue analysis and enhanced the protective effect against oxidative stress in C2C12 myocytes by increasing p-mTOR/mTOR protein expression to 160%. This work possesses potential in producing BCAAs by using protease for utilization in food.

Effect of dehulling and germination on the functional properties of grass pea (Lathyrus sativus) flour

The compositional, bioactive, functional, pasting, and thermal characteristics of native, dehulled, and germinated grass pea flour were examined. Germination significantly improved the protein content and bioactive properties while simultaneously reducing total carbohydrate and fat levels. However, dehulling increased the fat content, foaming, and emulsion properties. Dehulling and germination significantly increased (p < 0.05) the functional properties by improving flowability and cohesiveness. Although processing methods enhance functional properties, the pasting properties of dehulled and germinated flours differ significantly (p < 0.05) from the native flour. The X-ray diffraction patterns indicate a reduction in percentage crystallinity in germinated flours. Overall, the study suggests that the dehulling and germination processes enhanced the quality of grass peas by improving nutritive value and functional attributes.

Characterization and Techno-Functional Properties of High Protein Walnut Flour from an Oil by-Product

A high protein walnut flour (HPWF) was obtained by defatting walnut flour (WF), which is a by-product of the oil industry. The objective of this study was the chemical and techno-functional characterization of HPWF. Composition, amino acid content, protein secondary structure, protein solubility and thermal transitions were measured. Besides, the techno-functional properties, emulsion activity and stability, and water holding and oil absorption capacities, of HPWF were evaluated. Also, the molecular mass of proteins under denaturing conditions and the microstructure of HPWF were evaluated by electrophoresis and confocal scanning laser microscopy, respectively. HPWF had 55.4% protein content and 21.5% total dietary fibre. In terms of HPWF amino acid composition, the limiting amino acids were the sulphurated cysteine and methionine. By FTIR analysis, the main secondary structures were β-sheet (49%) followed by α-helix (24%); both structures are considered to be ordered. Likewise, HPWF soluble proteins increased at basic pH and HPWF proteins were separated in 11 bands with molecular masses ranging from 97 kDa to 18 kDa by electrophoresis. With respect to techno-functional properties, HPWF presented good emulsion activity (51%) and high thermal emulsion stability (46%). In addition, HPWF retained 571% and 242% of water and oil by weight, respectively. Finally, the micrograph showed the predominance of protein structures and fibre fragments, and the presence of few lipids mostly trapped. These results showed that HPWF is an interesting source of plant-based proteins and walnut flour can be used to obtain high protein ingredients from non-traditional sources.

Toward Diverse Plant Proteins for Food Innovation

This review highlights the development of plant proteins from a wide variety of sources, as most of the research and development efforts to date have been limited to a few sources including soy, chickpea, wheat, and pea. The native structure of plant proteins during production and their impact on food colloids including emulsions, foams, and gels are considered in relation to their fundamental properties, while highlighting the recent developments in the production and processing technologies with regard to their impacts on the molecular properties and aggregation of the proteins. The ability to quantify structural, morphological, and rheological properties can provide a better understanding of the roles of plant proteins in food systems. The applications of plant proteins as dairy and meat alternatives are discussed from the perspective of food structure formation. Future directions on the processing of plant proteins and potential applications are outlined to encourage the generation of more diverse plant-based products.

A portable dry film FTIR instrument for industrial food and bioprocess applications

The main objective of this study was to design, build, and test a compact, multi-well, portable dry film FTIR system for industrial food and bioprocess applications. The system features dry film sampling on a circular rotating disc comprising 31 wells, a design that was chosen to simplify potential automation and robotic sample handling at a later stage. Calibration models for average molecular weight (AMW, 200 samples) and collagen content (68 samples) were developed from the measurements of industrially produced protein hydrolysate samples in a controlled laboratory environment. Similarly, calibration models for the prediction of lactate content in samples from cultivation media (59 samples) were also developed. The portable dry film FTIR system showed reliable model characteristics which were benchmarked with a benchtop FTIR system. Subsequently, the portable dry film FTIR system was deployed in a bioprocessing plant, and protein hydrolysate samples were measured at-line in an industrial environment. This industrial testing involved building a calibration model for predicting AMW using 60 protein hydrolysate samples measured at-line using the portable dry film FTIR system and subsequent model validation using a test set of 26 samples. The industrial calibration in terms of coefficient of determination (R2 = 0.94), root mean square of cross-validation (RMSECV = 194 g mol-1), and root mean square of prediction (RMSEP = 162 g mol-1) demonstrated low prediction errors as compared to benchtop FTIR measurements, with no statistical difference between the calibration models of the two FTIR systems. This is to the authors' knowledge the first study for developing and employing a portable dry film FTIR system in the enzymatic protein hydrolysis industry for successful at-line measurements of protein hydrolysate samples. The study therefore suggests that the portable dry film FTIR instrument has huge potential for in/at-line applications in the food and bioprocessing industries.

Impact of pilot-scale microfluidization on soybean protein structure in powder and solution

The effect of microfluidization treatment on the primary, secondary, and tertiary structure of soybean protein isolate (SPI) was investigated. The samples were treated with and without controlling the temperature and circulated in the system 1, 3, and 5 times at high pressure (137 MPa). Then, the treated samples were freeze-dried and reconstituted in water to check the impact of the microfluidization on two different states: powder and solution. Regarding the primary structure, the SDS-PAGE analysis under reducing conditions showed that the protein bands remained unchanged when exposed to microfluidization treatment. When the temperature was controlled for the samples in their powder state, a significant decrease in the quantities of β-sheet and random coil and a slight reduction in α-helix content was noticed. The observed decrease in β-sheet and the increase in β-turns in treated samples indicated that microfluidization may lead to protein unfolding, opening the hydrophobic regions. Additionally, a lower amount of α-helix suggests a higher protein flexibility. After reconstitution in water, a significant difference was observed only in α-helix, β-sheet and β-turn. Related to the tertiary structure, microfluidization increases the surface hydrophobicity. Among all the conditions tested, the samples where the temperature is controlled seem the most suitable.

Fully Organic Sensors for Continuous Real-Time Digestion Monitoring

Monitoring the gastric digestive function is important for the diagnosis of gastric disorders and drug development. However, there is no report on the in situ and real-time monitoring of digestive functions. Herein, we report a flexible fully organic sensor to effectively monitor protein digestion in situ in a simulated gastric environment for the first time. The sensors are made of a blend of gluten that is a protein and poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) that is a conducting polymer. During the protein digestion, the breakdown of the polypeptides increases the level of separation among the PEDOT chains, thereby increasing the resistance. The resistance variation is sensitive to various conditions, including the concentration of pepsin that is the enzyme for protein digestion, temperature, pH value, and digestive drugs. Hence, these sensors can provide real-time information about the digestion and efficacy of digestive drugs. In addition, the signals can be collected via a convenient wireless communication manner.

Myofibrillar proteins' intermolecular interaction weakening and degradation: Are they mainly responsible for the tenderization of meat containing l-arginine, l-lysine, or/and NaCl?

This study explored the effects of l-arginine, l-lysine, and NaCl alone and in combination on the tenderness of porcine meat. Arg, Lys, and NaCl alone improved the tenderness, decreased the cooking loss, and increased the myofibrillar fragmentation index (MFI) of porcine meat; Both Arg and Lys cooperated with NaCl to better achieve this effect. Furthermore, Arg/Lys collaborated with NaCl to increase muscle fiber swelling and moisture content of the meat and promoted the extraction of main myofibrillar proteins. FT-IR revealed that Arg, Lys, or NaCl alone or in combination caused changes in protein-water interactions. Western blotting revealed varying degrees of meat protein degradation in all cases, but the results did not well coincide with those of shear force and the MFI. Therefore, the weakening of intermolecular forces between myofibrillar proteins was considered the main reason for meat tenderization under the present study conditions.

Unraveling the potential of non-thermal ultrasonic contact drying for enhanced functional and structural attributes of pea protein isolates: A comparative study with spray and freeze-drying methods

The challenge of preserving the quality of thermal-sensitive polymeric materials specifically proteins during a thermal drying process has been a subject of ongoing concern. To address this issue, we investigated the use of ultrasound contact drying (USD) under non-thermal conditions to produce functionalized pea protein powders. The study extensively examined functional and physicochemical properties of pea protein isolate (PPI) in powder forms obtained through three drying methods: USD (30 °C), spray drying (SD), and freeze drying (FD). Additionally, physical attributes such as powder flowability and color, along with morphological properties, were thoroughly studied. The results indicated that the innovative USD method produced powders of comparable quality to FD and significantly outperformed SD. Notably, the USD-PPI exhibited higher solubility across all pH levels compared to both FD-PPI and SD-PPI. Moreover, the USD-PPI samples demonstrated improved emulsifying and foaming properties, a higher percentage of random coil form (56.2 %), increased gel strength, and the highest bulk and tapped densities. Furthermore, the USD-PPI displayed a unique surface morphology with visible porosity and lumpiness. Overall, this study confirms the effectiveness of non-thermal ultrasound contact drying technology in producing superior functionalized plant protein powders, showing its potential in the fields of chemistry and sustainable materials processing.

Potential inhibitory effect of highland barley protein hydrolysates on the formation of advanced glycation end-products (AGEs): A mechanism study

Advanced glycation end products (AGEs) can be caused during a glycoxidation reaction. This reaction is associated with complications of diabetes and the consequences of health problems. Therefore, we are exploring the prohibitory effect of highland barley protein hydrolysates (HBPHs) on AGE formation. Herein, first extracted the protein from highland barley with various pH conditions and then hydrolyzed using four different proteolytic enzymes (flavourzyme, trypsin, papain, pepsin) under different degrees of hydrolysis. We assessed three degrees of hydrolysates (lowest, middle, highest) of enzymes used to characterize the antioxidant activity and physicochemical properties. Among all the hydrolysates, flavourzyme-treated hydrolysates F-1, F-2, and F-3 indicated the high ability to scavenge DPPH (IC50 values of 0.97 %, 0.63 %, and 0.90 %), structural and functional properties. Finally, the inhibitory effect of the most active hydrolysates F-1, F-2, and F-3 against the AGEs formation was evaluated in multiple glucose-glycated bovine serum albumin (BSA) systems. Additionally, in a BSA system, F-3 exhibited the strong antiglycation activity, effectively suppressed the non-fluorescent AGE (CML), and the fructosamine level. Moreover, it decreased carbonyl compounds while also preventing the loss of thiol groups. Our results would be beneficial in the application of the food industry as a potential antiglycation agent for several chronic diseases.

Effect of magnetic field-assisted fermentation on the in vitro protein digestibility and molecular structure of rapeseed meal

BACKGROUND

There has been a significant growth in demand for plant-derived protein, and this has been accompanied by an increasing need for sustainable animal-feed options. The aim of this study was to investigate the effect of magnetic field-assisted solid fermentation (MSSF) on the in vitro protein digestibility (IVPD) and functional and structural characteristics of rapeseed meal (RSM) with a mutant strain of Bacillus subtilis.

RESULTS

Our investigation demonstrated that the MSSF nitrogen release rate reached 86.3% after 96 h of fermentation. The soluble protein and peptide content in magnetic field feremented rapeseed meal reached 29.34 and 34.49 mg mL-1 after simulated gastric digestion, and the content of soluble protein and peptide in MF-FRSM reached 61.81 and 69.85 mg mL-1 after simulated gastrointestinal digestion, which significantly increased (p > 0.05) compared with the fermented rapeseed meal (FRSM). Studies of different microstructures - using scanning electron microscopy (SEM) and atomic force microscopy (AFM) - and protein secondary structures have shown that the decline in intermolecular or intramolecular cross-linking leads to the relative dispersion of proteins and improves the rate of nitrogen release. The smaller number of disulfide bonds and conformational alterations suggests that the IVPD of RSM was improved.

CONCLUSIONS

Magnetic field-assisted solid fermentation can be applied to enhance the nutritional and protein digestibility of FRSM. © 2024 Society of Chemical Industry.

Study of the changes on the physicochemical properties of isolated lentil starch during germination

In this work, the changes in the composition of the flours and in the morphological, structural, thermal, vibrational, rheological, and functional properties of the isolated lentil starch during the germination process were investigated. The fiber, fat, and ash content of the flours decreased and the protein content increased, while the apparent amylose content of the starch granules remained constant. Using scanning electron microscopy (SEM), the starch granules remained intact during germination, and no enzymatic activity of α- and β-amylases was observed. X-ray diffraction shows that the starch has nanocrystals with hexagonal structure which predominate over the nanocrystals with orthorhombic structure and are classified as C-type starch. The most important result is that these nanocrystals do not play an important role during germination. As the germination time progresses, differential scanning calorimetry (DSC) shows a decrease in the gelatinization temperature (Tp) of the starch, ranging from 70.34 ± 0.25 °C for the native lentil starch to values of 67.16 ± 0.37 °C for the starch on the fourth day of germination (ILS4), this transition being related to the solvation of the nanocrystals. On the other hand, the pasting profiles show no significant changes during germination, indicating that no significant changes in starch content occur during germination. Starch degradation is essential for the production of malt for fermented beverages. This fact makes sprouted lentils not a candidate for the short-term fermentation required in the beverage industry.

Characterization and optimization of exopolysaccharide extracted from a newly isolated halotolerant cyanobacterium, Acaryochloris Al-Azhar MNE ON864448.1 with antiviral activity

Several antiviral agents lost their efficacy due to their severe side effects and virus mutations. This study aimed to identify and optimize the conditions for exopolysaccharide (EPS) production from a newly isolated cyanobacterium, Acaryochloris Al-Azhar MNE ON864448.1, besides exploring its antiviral activity. The cyanobacterial EPS was purified through DEAE-52 cellulose column with a final yield of 83.75%. Different analysis instruments were applied for EPS identification, including Fourier-transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), and gas chromatographic-mass spectrometry (GC-MS). Plackett-Burman's design demonstrated that working volume (X1), EDTA (X2), inoculum size (X3), CaCl2 (X4), and NaCl (X5) are the most important variables influencing EPS production. Central composite design (CCD) exhibited maximum EPS yield (9.27 mg/mL) at a working volume of 300 mL in a 1 L volumetric flask, EDTA 0.002 g/L, inoculum size 7%, CaCl2 0.046 g/L, and NaCl 20 g/L were applied. EPS showed potent antiviral activities at different stages of herpes simplex virus type-1 and 2 (HSV-1, HSV-2), adenovirus (ADV) and coxsackievirus (A16) infections. The highest half-maximal inhibitory concentration (IC50) (6.477 µg/mL) was recorded during HSV-1 internalization mechanism, while the lowest IC50 (0.005669 µg/mL) was recorded during coxsackievirus neutralization mechanism.

A promising Artemisia capillaris Thunb. Leaf proteins with high nutrition, applicable function and excellent antioxidant activity

The nutritional and functional properties of leaf proteins is a decisive factor for their use in food. This work was aimed to extract defatted Artemisia capillaris Thunb. (ACD) leaf proteins (ACLP), and assess ACLP nutritional quality, functional properties and in vitro antioxidant activity, as well characterize the structure. ACLP had a balanced amino acid profile and high bioavailability (protein digestibility corrected amino acid score (PDCAAS) 99.29 %). Solubility, foaming capacity and emulsifying ability of ACLP correlated positively with pH. Water and oil holding capacity were increased with temperature. Gel electrophoresis shown the protein molecular size was mainly ∼25 kDa, and random coil was the mainly secondary structure while β-sheet was dominant regular conformation as indicated by circular dichroism (CD). ACLP performed in vitro antioxidant activity which was better after digestion. All data implied ACLP met the WHO/FAO protein quality expectations and had application potential in food.

Evaluation of the Quality Changes in Three Commercial Pastourma Samples during Refrigerated Storage Using Physicochemical, Microbiological, and Image Analyses Combined with Chemometrics

Despite the inherent stability of dried and cured products, such as pastourma, appropriate refrigeration remains essential for preserving their optimal characteristics. This study explored quality and safety characteristics in lamb, beef, and buffalo pastourma during 16-day refrigeration storage after package opening. The comprehensive approach employed Attenuated Total Reflection-Fourier-Transform Infrared (ATR-FTIR) spectroscopy, colorimetry, and image analysis, alongside physicochemical and microbiological analyses, to shed light on these alterations. The findings reveal a reduction in textural uniformity and color vibrancy (fading reds and yellows) across all samples during storage, with lamb pastourma exhibiting the most pronounced effects. Notably, image analysis emerged as a powerful tool, enabling the accurate classification of samples based on storage duration. Additionally, significant variations were observed in moisture content, hue angle, firmness, and TBARS levels, highlighting their influence on pastourma quality. The study documented a gradual decrease in lactic acid bacteria and aerobic plate count populations over time. ATR-FTIR spectra's interpretation revealed the presence of lipids, proteins, carbohydrates, and water. Protein secondary structures, demonstrably influenced by the meat type used, exhibited significant changes during storage, potentially impacting the functional and textural properties of pastourma. Overall, the findings contribute to a deeper understanding of pastourma spoilage during storage, paving the way for the development of improved preservation and storage strategies.

Ultrasound-mediated hydration of finger millet: Effects on antinutrients, techno-functional and bioactive properties, with evaluation of ANN-PSO and RSM optimization methods

Finger millet, rich in nutrients, faces bioavailability limitations due to antinutrients like phytates and tannins that can be reduced by ultrasound mediated hydration (USH). Here, USH process of finger millet was optimized by varying ultrasound amplitude, water to grain ratio (W:G), treatment time, and frequency for reducing antinutrients and improving techno-functional attributes. USH resulted in a maximum reduction of 73% and 71% in phytates and tannins, respectively. The process was modeled using artificial neural network (ANN) and response surface methodology (RSM). ANN outperformed RSM in process prediction, and particle swarm optimization (ANN-PSO) suggested optimal conditions: 76% amplitude, W:G of 3.5:1, 17.5 min treatment time at 40 kHz. USH samples showed higher β-sheet, β-turn, and random coil proportions, with lower α-helix levels. Multivariate analysis also identified higher amplitude and frequency, with shorter treatment time as desirable USH conditions. USH could aid in enhancing commercial viability and nutritional quality of finger millet.

Synthetic β-sheets mimicking fibrillar and oligomeric structures for evaluation of spectral X-ray scattering technique for biomarker quantification

BACKGROUND

Archetypical cross-β spines sharpen the boundary between functional and pathological proteins including β-amyloid, tau, α-synuclein and transthyretin are linked to many debilitating human neurodegenerative and non-neurodegenerative amyloidoses. An increased focus on development of pathogenic β-sheet specific fluid and imaging structural biomarkers and conformation-specific monoclonal antibodies in targeted therapies has been recently observed. Identification and quantification of pathogenic oligomers remain challenging for existing neuroimaging modalities.

RESULTS

We propose two artificial β-sheets which can mimic the nanoscopic structural characteristics of pathogenic oligomers and fibrils for evaluating the performance of a label free, X-ray based biomarker detection and quantification technique. Highly similar structure with elliptical cross-section and parallel cross-β motif is observed among recombinant α-synuclein fibril, Aβ-42 fibril and artificial β-sheet fibrils. We then use these β-sheet models to assess the performance of spectral small angle X-ray scattering (sSAXS) technique for detecting β-sheet structures. sSAXS showed quantitatively accurate detection of antiparallel, cross-β artificial oligomers from a tissue mimicking environment and significant distinction between different oligomer packing densities such as diffuse and dense packings.

CONCLUSION

The proposed synthetic β-sheet models mimicked the nanoscopic structural characteristics of β-sheets of fibrillar and oligomeric states of Aβ and α-synuclein based on the ATR-FTIR and SAXS data. The tunability of β-sheet proportions and shapes of structural motifs, and the low-cost of these β-sheet models can become useful test materials for evaluating β-sheet or amyloid specific biomarkers in a wide range of neurological diseases. By using the proposed synthetic β-sheet models, our study indicates that the sSAXS has potential to evaluate different stages of β-sheet-enriched structures including oligomers of pathogenic proteins.

Effects of Germination on the Structure, Functional Properties, and In Vitro Digestibility of a Black Bean (Glycine max (L.) Merr.) Protein Isolate

The utilization of black beans as a protein-rich ingredient presents remarkable prospects in the protein food industry. The objective of this study was to assess the impact of germination treatment on the physicochemical, structural, and functional characteristics of a black bean protein isolate. The findings indicate that germination resulted in an increase in both the total and soluble protein contents of black beans, while SDS-PAGE demonstrated an increase in the proportion of 11S and 7S globulin subunits. After germination, the particle size of the black bean protein isolate decreased in the solution, while the absolute value of the zeta potential increased. The above results show that the stability of the solution was improved. The contents of β-sheet and β-turn gradually decreased, while the content of α-helix increased, and the fluorescence spectrum of the black bean protein isolate showed a red shift phenomenon, indicating that the structure of the protein isolate and its polypeptide chain were prolonged, and the foaming property, emulsification property and in vitro digestibility were significantly improved after germination. Therefore, germination not only improves functional properties, but also nutritional content.

Comparative study of dietary phenols with Tartary buckwheat protein (2S/13S): impact on structure, binding sites and functionality of protein

BACKGROUND

This research was to investigate the interaction mechanism between 2S albumin and 13S globulin (2S and 13S, the most important storage proteins in Tartary buckwheat seeds) and three phenols (rutin, quercetin and myricetin) regarding the structural and antioxidant properties of their complexes.

RESULTS

There are differences in the binding affinity of phenols for 2S and 13S. Rutin had a higher binding affinity for 2S, myricetin had a higher binding affinity for 13S, and 13S exhibited a higher affinity toward phenols than did 2S. Binding with phenols significantly changed the secondary and tertiary structures of 2S and 13S, decreased the surface hydrophobic value and enhanced the antioxidant capacity. Molecular docking and isothermal titration calorimetry showed that the binding processes were spontaneous and that there were hydrogen bonds, hydrophobic bonds and van der Waals force interactions between phenols and proteins.

CONCLUSION

These findings could provide meaningful guidance for the further application of buckwheat protein complex. © 2023 Society of Chemical Industry.

Tailoring the Techno-Functional Properties of Fava Bean Protein Isolates: A Comparative Evaluation of Ultrasonication and Pulsed Electric Field Treatments

The fava bean protein isolate (FBPI) holds promise as a sustainable plant-based protein ingredient. However, native FBPIs exhibit limited functionality, including unsuitable emulsifying activities and a low solubility at a neutral pH, restricting their applications. This study is focused on the effect of ultrasonication (US) and pulsed electric fields (PEF) on modulating the techno-functional properties of FBPIs. Native FBPIs were treated with US at amplitudes of 60-90% for 30 min in 0.5 s on-and-off cycles and with PEF at an electric field intensity of 1.5 kV/cm with 1000-4000 pulses of 20 μs pulse widths. US caused a reduction in the size and charge of the FBPIs more prominently than the PEF. Protein characterization by means of SDS-PAGE illustrated that US and PEF caused severe-to-moderate changes in the molecular weight of the FBPIs. In addition, a spectroscopic analysis using Fourier-transform infrared (FTIR) and circular dichroism (CD) revealed that US and the PEF induced conformational changes through partial unfolding and secondary structure remodeling from an α-helix to a β-sheet. Crystallographic and calorimetric determinations indicated decreased crystallinity and lowered thermal transition temperatures of the US- and PEF-modified FBPIs. Overall, non-thermal processing provided an effective strategy for upgrading FBPIs' functionality, with implications for developing competitive plant-based protein alternatives.

Immobilization of Cyclodextrin glycosyltransferase onto three dimensional- hydrophobic and two dimensional- hydrophilic supports: A comparative study

Cyclodextrin glycosyltransferase (CGTase) degrades starch into cyclodextrin via enzymatic activity. In this study, we immobilize CGTase from Thermoanaerobacter sp. on two supports, namely graphene nanoplatelets (GNP) consisting of short stacks of graphene nanoparticles and a calcium-based two-dimensional metal organic framework (Ca-TMA). The uptakes of CGTase on GNP and Ca-TMA reached 40 and 21 mg g-1 respectively, but immobilized CGTase on Ca-TMA showed a higher specific activity (38 U mg-1 ) than that on GNP (28 U mg-1 ). Analysis of secondary structures of CGTase, shows that immobilization reduces the proportion of β-sheets in CGTase from 56% in the free to 49% and 51.3% for GNP and Ca-TMA respectively, α-helix from 38.5% to 18.1 and 37.5%, but led to increased β-turns from 5.5 to 40% and 11.2% for GNP and Ca-TMA, respectively. Lower levels of conformational changes were observed over the more hydrophilic Ca-TMA compared to hydrophobic GNP, resulting in its better activity. Increased β-turns were found to correlate with lower β-CD production, while more β-sheets and α-helix favored more β-CD. Reusability studies revealed that GNP retains up to 74% of initial CGTase activity, while Ca-TMA dropped to 33% after eight consecutive uses. The results obtained in this work provide insight on the effect of support's surface properties on CGTase performance and can assist in developing robust CGTase-based biocatalysts for industrial application.

On the effect of pepsin incubation on type I collagen from horse tendon: Fine tuning of its physico-chemical and rheological properties

Type I collagen is commonly recognized as the gold standard biomaterial for the manufacturing of medical devices for health-care related applications. In recent years, with the final aim of developing scaffolds with optimal bioactivity, even more studies focused on the influence of processing parameters on collagen properties, since processing can strongly affect the architecture of collagen at various length scales and, consequently, scaffolds macroscopic performances. The ability to finely tune scaffold properties in order to closely mimic the tissues' hierarchical features, preserving collagen's natural conformation, is actually of great interest. In this work, the effect of the pepsin-based extraction step on the material final properties was investigated. Thus, the physico-chemical properties of fibrillar type I collagens upon being extracted under various conditions were analyzed in depth. Correlations of collagen structure at the supramolecular scale with its microstructural properties were done, confirming the possibility of tuning rheological, viscoelastic and degradation properties of fibrillar type I collagen.

Assessing the effect of Maillard reaction products on the functionality and antioxidant properties of Amaranth-red seaweed blends

Plant-based proteins, represented by amaranth in our study, embrace a potential as an ingredient for the functional-food formulation. However, their efficacy is hindered by inherent limitations in solubility, emulsification, and antioxidant traits. The Maillard reaction, a complex chemical-process resulting in a diverse array of products, including Maillard conjugates and Maillard reaction products (MRPs), can employ variable effects on these specific attributes. To elucidate the influence of this reaction and the MRPs on the aforementioned properties, we used a complex blend of dehydrated seaweed Gracilaria and amaranth protein to create a conjugate-MRP blend. Our investigations revealed that the resultant incorporation enhanced solubility, emulsification, and antioxidant properties, while the intermediates formed did not progress to advanced glycation stages. This change is likely attributed to the dual effect of conjugates that altered the secondary protein structure, while the generation and/or preservation of MRPs post ultrasonication and spray drying enhanced its antioxidant potential.

Investigation of 3D printing of toddler foods with special shape and function based on fenugreek gum and flaxseed protein

The practicability of using corn and flaxseed protein as printing inks for manufacture of printed products specifically designed for toddlers as a dysphagia diet with high precision and special shapes with addition of fenugreek gum (FGG) was investigated. 3D printing was used to process grains and dysphagia-compatible food (corn) into a dietary product with attractive appearance which was also easy to swallow. Rheological measurements shown that appropriate amount of flaxseed protein (FP, 0-10 %) can reduce the stickiness and yield strength of printing material. Based on FTIR measurements, FP weakened the hydrogen bond strength of inks, but it was still an important gradient for the formation of the ink suitable for precision 3D printing. The TPA results shown that the addition of FP (0-10 %) remarkably reduced both the stickiness and hardness of the ink. These results shown that compared with the control group, materials with FGG additions possessed higher printing accuracy and self-supporting ability. Ink with 5 % FP content exhibited the best printability and swallowability, while ink with 10 % FP content had the lowest viscosity and hardness, but it was not suitable for 3D printing. 3D printing of objects printed using Ink-C (5%FP and 0.8 %FGG) showed high support characteristic and attractive appearance. According to the international IDDSI testing standards, Ink-C (5%FP and 0.8 %FGG), Ink-E (15%FP and 0.8 %FGG), and Ink-F (20%FP and 0.8 %FGG) were defined as level 5-minced and moist foods.

Influence of electrohydrodynamics on the drying characteristics and volatile components of iron stick yam

The drying characteristics, rehydration capacity, color, infrared spectra and volatile components of iron stick yam slices were investigated under different alternating current (AC) voltages (13, 17, 21 kV), hot air drying (HAD) (60 °C) and natural drying (AD) by electrohydrodynamic (EHD) drying and HAD experimental devices. The results showed that slices of iron stick yam dried the quickest with HAD, which also had the fastest drying rate; while drying the slices of iron stick yam with EHD led to a better rehydration capacity, higher brightness L* and whiteness, a more stable protein secondary structure, and a greater variety and content of volatile components compared with AD and HAD. These finding indicated that EHD is a more promising method for drying iron stick yam.

Transglutaminase-Induced Polymerization of Pea and Chickpea Protein to Enhance Functionality

Pulse proteins, such as pea and chickpea proteins, have inferior functionality, specifically gelation, compared to soy protein, hindering their applications in different food products, such as meat analogs. To close the functionality gap, protein polymerization via targeted modification can be pursued. Accordingly, transglutaminase-induced polymerization was evaluated in pea protein isolate (PPI) and chickpea protein isolate (ChPI) to improve their functionality. The PPI and ChPI were produced following a scaled-up salt extraction coupled with ultrafiltration (SE-UF) process. Transglutaminase (TGase)-modified PPI and ChPI were evaluated in comparison to unmodified counterparts and to commercial protein ingredients. Protein denaturation and polymerization were observed in the TG PPI and TG ChPI. In addition, the TGase modification led to the formation of intermolecular β-sheet and β-turn structures that contributed to an increase in high-molecular-weight polymers, which, in turn, significantly improved the gel strength. The TG ChPI had a significantly higher gel strength but a lower emulsification capacity than the TG PPI. These results demonstrated the impact of the inherent differences in the protein fractions on the functional behavior among species. For the first time, the functional behavior of the PPI and ChPI, produced on a pilot scale under mild processing conditions, was comprehensively evaluated as impacted by the TGase-induced structural changes.

Research updates and progress on nutritional significance of the amides I and II, alpha-helix and beta-sheet ratios, microbial protein synthesis, and steam pressure toasting condition with globar and synchrotron molecular microspectroscopic techniques with chemometrics

This article aims to review research updates and progress on the nutritional significance of the amides I and II, the alpha-helix and beta-sheet ratios, the microbial protein synthesis, and the steam pressure toasting condition in food and feed with globar and synchrotron molecular microspectroscopic techniques plus chemometrics (both univariate and multivariate techniques). The review focused on (I) impact of the amides I and II, and the alpha-helix and beta-sheet-structure ratios in food and feeds; (II) Current research progress and update in synchrotron technique and application in feed and food molecular structure studies that are associated with nutrition delivery; (III) Impact of thermal processing- steam pressure toasting condition on feed and food; (IV). Impact of the microbial protein synthesis and methodology on feed and food; and (V). Impact on performance and production of ruminants with Faba beans.

Preparation of a Mesoporous Biosensor for Human Lactate Dehydrogenase for Potential Anticancer Inhibitor Screening

Cancer is the second leading cause of death worldwide, with a dramatic impact due to the acquired resistance of cancers to used chemotherapeutic drugs and treatments. The enzyme lactate dehydrogenase (LDH-A) is responsible for cancer cell proliferation. Recently the development of selective LDH-A inhibitors as drugs for cancer treatment has been reported to be an efficient strategy aiming to decrease cancer cell proliferation and increase the sensitivity to traditional chemotherapeutics. This study aims to obtain a stable and active biocatalyst that can be utilized for such drug screening purposes. It is conceived by adopting human LDH-A enzyme (hLDH-A) and investigating different immobilization techniques on porous supports to achieve a stable and reproducible biosensor for anticancer drugs. The hLDH-A enzyme is covalently immobilized on mesoporous silica (MCM-41) functionalized with amino and aldehyde groups following two different methods. The mesoporous support is characterized by complementary techniques to evaluate the surface chemistry and the porous structure. Fluorescence microscopy analysis confirms the presence of the enzyme on the support surface. The tested immobilizations achieve yields of ≥80%, and the best retained activity of the enzyme is as high as 24.2%. The optimal pH and temperature of the best immobilized hLDH-A are pH 5 and 45 °C for the reduction of pyruvate into lactate, while those for the free enzyme are pH 8 and 45 °C. The stability test carried out at 45 °C on the immobilized enzyme shows a residual activity close to 40% for an extended time. The inhibition caused by NHI-2 is similar for free and immobilized hLDH-A, 48% and 47%, respectively. These findings are significant for those interested in immobilizing enzymes through covalent attachment on inorganic porous supports and pave the way to develop stable and active biocatalyst-based sensors for drug screenings that are useful to propose drug-based cancer treatments.

Structural properties of Kudzu protein enzymatic hydrolysate and its repair effect on HepG2 cells damaged by H2O2 oxidation

We investigated the structural properties, foaming capacity and foaming stability, antioxidant activity, and amino acid composition of Kudzu protein (KP) and Kudzu protein hydrolysate (KPH). The peptide sequence of KPH was analyzed using ultra performance liquid chromatography/tandem mass spectrometry (UPLC-MS/MS), and the binding ability of the peptide sequence to Keap1 was predicted through molecular docking simulations. The electrophoresis and molecular weight distribution analysis results showed that the molecular weight of KPH was significantly lower than that of KP, with a mean molecular weight of approximately 2000-5000 Da. The structures and properties were characterized using Fourier transform infrared spectroscopy, relative fluorescence, and circular dichroism. The results showed that KP exposed a large number of hydrophobic groups after enzymatic hydrolysis, and its structure changed from α-helical to random coils. KPH has a higher foaming capacity (200%) and foaming stability (97.5%) than KP, which may be related to the change in structure. These results indicate that moderate hydrolysis can improve the functional properties of KP, providing a new opportunity for its application as a food ingredient. The antioxidant assay results showed that KP and KPH had a good hydroxyl radical, superoxide anion, 1,1-diphenyl-2-picrylhydrazyl (DPPH), and 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) scavenging capacity and a high reducing capacity. KPH exerted better antioxidant effects than KP. The scavenging rates for DPPH, ABTS, hydroxyl radicals, and superoxide anions were 89.31%, 93.14%, 85.74%, and 58.29%, respectively, and its reducing capacity was 2.191, which may be related to the increase in amino acids with antioxidant activity after enzymolysis. In vitro, KP and KPH could significantly repair H2O2-induced oxidative damage in HepG2 cells, reduce the apoptosis rate, activate the Nrf2-Keap1 signaling pathway, reduce the accumulation of reactive oxygen species and malondialdehyde after oxidative damage, increase the activities of superoxide dismutase and glutathione (GSH) peroxidase, and increase the content of GSH and the total antioxidant capacity. Twenty-one peptide components were identified in KPH using UPLC-MS/MS, and the binding ability of 21 peptide components to Keap1 was analyzed through molecular docking technology. The results showed that all 21 peptides in KPH had good antioxidant activity, and real-time quantitative PCR (qRT-PCR) analysis was conducted to further explain the high antioxidant activity of KPH at the genetic level. These results show that KP and KPH are suitable for preparing antioxidant foods and related health foods to prevent oxidation-related diseases. KPH has more beneficial effects than KP.

Quantifying the effects of pre-roasting on structural and functional properties of yellow pea proteins

Roasting could modify the protein structure/conformation, contributing to changes in functional properties. Here we investigated the effects of pre-roasting on the extraction efficiency, structural and functional properties of pea protein concentrates and isolates (PPC and PPI) produced from yellow split peas. The shorter roasting times (150 °C, 10 and 20 min) had little effect on protein yields and could increase the solubility of PPC or PPI by ∼ 12% at pH 7 and enhance the solubility of PPI by ∼ 12% (10-min roasting) and ∼ 24% (20-min roasting) at pH 3. However, a longer duration of pre-roasting (150 °C, 30 min) significantly reduced the extraction efficiency of PPC and PPI by ∼ 30% and ∼ 61%, respectively. Meanwhile, pre-roasting had minor effects on SDS-PAGE profiles and the secondary structures of pea proteins but significantly altered tertiary structures by reducing free sulfhydryl groups, increasing disulfide bonds and surface hydrophobicity. As for the emulsifying properties, pre-roasting improved the emulsion ability index (EAI) of PPC and PPI but decreased the emulsion stability index (ESI) of PPC and had no significant effect on PPI. Moreover, PPC and PPI with shorter pre-roasting duration (10 and 20 min) had endothermic peaks and showed a slight decrease in the denaturation temperature (Td) and the onset temperature (To), respectively. Overall, the study demonstrated that controlled pre-roasting at 150 °C for 10 min and 20 min altered protein structures (mainly tertiary structures), improving the solubility and EAI of pea proteins at pH 7, while retaining their thermal properties in comparison to unroasted samples.

Effect of protein on the gelatinization behavior and digestibility of corn flour with different amylose contents

The effects of endogenous proteins on the gelatinization behavior and digestibility of waxy corn flour (WCF), normal corn flour (NCF) and high amylose corn flour (HCF) were systematically investigated. Microscopic characteristics showed that the proteins surrounded multiple starch granules, which led to an increase in the particle size of the corn flour, but no significant change in the relative crystallinity. Small angle x-ray scattering experiments during pasting revealed that the starch granules of NCF remained compact, while WCF and HCF were relatively loose. Carbon-13 nuclear magnetic resonance spectroscopy (13C NMR) showed that the proteins retained the helical structure of starch allowing NCF to have a higher Resistant starch(RS) content. The presence of protein led to a decrease in swelling power, viscosity, and in vitro digestibility of starch, and a noticeable increase in gelatinization temperature and thermal stability. RS increased most significantly in NCF from 3.86 % to 15.27 %. The effect of protein on the water activity of starch with different amylose contents after pasting was also inconsistent. This study will contribute to the understanding of the interaction between starch and protein in corn flours with different amylose contents and contribute to the development of corn flours.

Evaluation of IR and Raman spectroscopic markers of human collagens: Insides for indicating colorectal carcinogenesis

Vibrational spectroscopic methods are widely used in the molecular diagnostics of carcinogenesis. Collagen, a component of connective tissue, plays a special role as a biochemical marker of pathological changes in tissues. The vibrational bands of collagens are very promising to distinguish between normal colon tissue, benign and malignant colon polyps. Differences in these bands indicate changes in the amount, structure, conformation and the ratio between the individual structural forms (subtypes) of this protein. The screening of specific collagen markers of colorectal carcinogenesis was carried out based on the FTIR and Raman (λ_ex 785 nm) spectra of colon tissue samples and purified human collagens. It was found that individual types of human collagens showed significant differences in their vibrational spectra, and specific spectral markers were found for them. These collagen bands were assigned to specific vibrations in the polypeptide backbone, amino acid side chains and carbohydrate moieties. The corresponding spectral regions for colon tissues and colon polyps were investigated for the contribution of collagen vibrations. Mentioned spectral differences in collagen spectroscopic markers could be of interest for early ex vivo diagnosis of colorectal carcinoma if combine vibrational spectroscopy and colonoscopy.

Comparative study on molecular and higher-order structures of legume seed protein isolates: Lentil, mungbean and yellow pea

Lentils and mungbean proteins are under-researched compared to pea and soybean. Lentils (green, red and black-lentils), mungbean and yellow pea protein isolates were obtained by alkaline extraction (pH 9)-isoelectric precipitation (pH 4.5) and investigated for molecular and higher-order structures using complementary and novel approaches. These extracted isolates showed comparable protein content but significantly greater nitrogen solubility index (NSI > 85 %) than commercial pea and soy protein isolates (NSI < 60 %). Based on molecular weight estimations from sodium dodecyl sulphate-polyacrylamide gel electrophoresis analysis, the soluble proteins of lentils and yellow pea were identified as legumin-like and vicilin-like, while mungbean was dominated by vicilin-like proteins. The soluble extracts were confirmed to be in native structural condition by size exclusion chromatography and nano-differential scanning calorimetry, unlike commercial extracts. Further differences in secondary structure were evident on circular dichroism spectra of the soluble extracts and deconvolution of the Amide I region (1700-1600 cm-1) from Fourier Transform Infrared of the total protein.

Effects of Concentration and Type of Lipids on the Droplet Size, Encapsulation, Colour and Viscosity in the Oil-in-Water Emulsions Stabilised by Rapeseed Protein

The objective of this study was to extract the rapeseed protein from by-products and further examine the effect of lab-made rapeseed protein on the droplet size, microstructure, colour, encapsulation and apparent viscosity of emulsions. Rapeseed protein-stabilised emulsions with an increasing gradient of milk fat or rapeseed oil (10, 20, 30, 40 and 50%, v/v) were fabricated using a high shear rate homogenisation. All emulsions showed 100% oil encapsulation for 30 days of storage, irrespective of lipid type and the concentration used. Rapeseed oil emulsions were stable against coalescence, whereas the milk fat emulsion showed a partial micro-coalescence. The apparent viscosity of emulsions raised with increased lipid concentrations. Each of the emulsions showed a shear thinning behaviour, a typical behaviour of non-Newtonian fluids. The average droplet size was raised in milk fat and rapeseed oil emulsions when the concentration of lipids increased. A simple approach to manufacturing stable emulsions offers a feasible hint to convert protein-rich by-products into a valuable carrier of saturated or unsaturated lipids for the design of foods with a targeted lipid profile.

Degradation of starch in pasta induced by extrusion below gelatinization temperature

The structural deformation of starch during pasta extrusion leads to varied effects on pasta quality. We investigated the impact of shearing force on the starch structure of pasta and pasta quality by varying the screw speed (100, 300, 500 and 600 rpm) with a temperature range of 25 to 50 ℃ in increments of 5 ℃, from the feeding zone to the die zone. The higher screw speeds were associated with more specific mechanical energy input (157, 319, 440, and 531 kJ/kg for pasta produced at 100, 300, 500 and 600 rpm, respectively), resulting in a lower pasting viscosity (1084, 813, 522 and 480 mPa·s for pasta produced at 100, 300, 500 and 600 rpm, respectively) in the pasta due to the loss of starch molecular order and crystallinity. Size-exclusion chromatography revealed that pasta produced at 600 rpm screw speed had a lower amylopectin size distribution which indicated molecular breakdown during extrusion. Pasta produced at 600 rpm had higher in vitro starch hydrolysis (both raw and cooked) than the pasta made at 100 rpm. The research provides relationship of how the screw speed can be manipulated to design pasta with varied texture and nutritional functionality.

Nuclei-induced formation of amyloid fibrils in whey protein: Effects of enzyme hydrolysis on the ability of nuclei to induce fibril formation

Homogeneous and secondary nuclei (HN and SN) are aggregates formed at different stages of whey protein isolate (WPI) self-assembly. More fibrils can form when HN/SN are added as nuclei than when WPI self-assembles. We evaluated the effect of hydrolysis treatment on fibril-induction ability of nuclei derived from WPI, and investigated the relationship between induction ability and nuclear structure. Hydrolyzed SN-induced 9.47% more WPI fibrils than unhydrolyzed SN-induced. Infrared spectroscopy, X-ray diffraction analysis, and atomic force microscopy were used to examine the structural changes in hydrolyzed nuclei and the fibrils induced using these nuclei. We concluded that hydrolysis treatment led to a looser inter-β-sheet packaging in nuclei by increasing the inter-β-sheet distance. The inter-β-sheet distance of cross-β structure was a key determinant of fibril-induction ability of nuclei, which could be enhanced when inter-β-sheet structure was moderately loose. This research may provide a theoretical basis for the mechanism of nuclei-induced WPI fibrillation.

Yam Bean (Pachyrhizus erosus L. Urban) Powder Improves Grass Carp Myofibrillar Protein Gel by Forming Disulfide Bonds, Hydrogen Bonds, and Proper Microstructure

This study aimed to analyze the impact of different additions (0-1.25%) of yam bean powder (YBP) on myofibrillar protein (MP) gel characteristics such as the structure, water-holding capacity (WHC), chemical interaction strength of grass carp MP, and texture. The results showed that the YBP exhibited a strong water absorption capacity and filled in the protein heat-induced polymerization gel network well, which enabled the gel network to capture and retain water effectively, resulting in MP gels containing YBP with excellent WHC and gel strength (0.75%). In addition, YBP induced the formation of hydrogen and disulfide bonds in proteins and inhibited the conversion of α-helices to β-sheets and β-turn structures, facilitating the formation of high-strength gel networks (p < 0.05). In conclusion, YBP can significantly improve the thermally induced gelling properties of grass carp MP. In particular, the addition of 0.75% YBP had the best effect in terms of filling the gel network of grass carp MP, resulting in the formation of a continuous and dense protein network, leading to the composite gel with the best WHC and texture.

Collagen Membrane as Water-Based Gel Electrolyte for Electrochromic Devices

Bio-based polymers are attracting great interest due to their potential for several applications in place of conventional polymers. In the field of electrochemical devices, the electrolyte is a fundamental element that determines their performance, and polymers represent good candidates for developing solid-state and gel-based electrolytes toward the development of full-solid-state devices. In this context, the fabrication and characterization of uncrosslinked and physically cross-linked collagen membranes are reported to test their potential as a polymeric matrix for the development of a gel electrolyte. The evaluation of the membrane's stability in water and aqueous electrolyte and the mechanical characterization demonstrated that cross-linked samples showed a good compromise in terms of water absorption capability and resistance. The optical characteristics and the ionic conductivity of the cross-linked membrane, after overnight dipping in sulfuric acid solution, demonstrated the potential of the reported membrane as an electrolyte for electrochromic devices. As proof of concept, an electrochromic device was fabricated by sandwiching the membrane (after sulfuric acid dipping) between a glass/ITO/PEDOT:PSS substrate and a glass/ITO/SnO₂ substrate. The results in terms of optical modulation and kinetic performance of such a device demonstrated that the reported cross-linked collagen membrane could represent a valid candidate as a water-based gel and bio-based electrolyte for full-solid-state electrochromic devices.

Influence of accelerating storage of foxtail millet on the edible and cooking quality of its porridge: An insight into the structural alteration of the in-situ protein and starch and physicochemical properties

This study aimed to elucidate the effect of the accelerating storage (40 °C, 10 weeks) of foxtail millet on the edible and cooking quality of its porridge. The structural alteration of the in-situ protein and starch in foxtail millet, as well as the physicochemical properties were investigated. Both the homogeneity and palatability of millet porridge were significantly improved after 8-week storage of millet, while its proximate compositions remained unchanged. Meanwhile, the accelerating storage increased the water absorption and swelling of millet by 20 % and 22 %, respectively. The morphological studies (using the SEM, CLSM and TEM) revealed that the starch granules in the stored millet became easier to swell and melt, leading to better gelatinization with a higher coverage extension in protein bodies. FTIR results showed that the protein hydrogen bonds in the stored millet became stronger and the starch ordered degree was reduced. Compared to the native foxtail millet, the peak, trough, final, and setback viscosity of the stored sample increased by 27 %, 76 %, 115 % and 143 %, respectively, while the onset, peak, and conclusion temperature increased by 0.80, 1.10 and 0.80 °C, respectively. Besides, the G' and G″ of the stored foxtail millet were significantly higher than its native counterpart.

Enzymatic hydrolysis of soy and chickpea protein with Alcalase and Flavourzyme and formation of hydrogen bond mediated insoluble aggregates

Food applications involving plant proteins require modification of their functionality to mimic the unique properties of animal proteins. Enzymatic hydrolysis is commonly used to alter the functionality of plant proteins, particularly to improve their solubility near the isoelectric point. Current methodological approaches mostly indicate improved solubility upon hydrolysis. However, published methods include the removal of insoluble material before analysis, and calculations are based on only the solubilized material as a percentage of the filtered protein. This approach artificially increases solubility estimation and gives an incorrect assessment of the efficacy of hydrolysis. By using the total amount of protein, this study aims to determine the effect of two microbial proteases, Flavourzyme and Alcalase, on the solubility and structural and thermal properties of soy and chickpea proteins. Protein isolates were first extracted from soy and chickpea flour and hydrolyzed from 0 to 3 h. Then, their degree of hydrolysis and solubility at a range of pHs were determined using the o-phthaldialdehyde (OPA) and Lowry methods, respectively. Proteins' electrophoretic mobility, protein-protein interactions, thermal properties, and protein secondary structures were also determined. Solubility decreased over time though the solubility of the hydrolysate improved near the isoelectric point. Soy Flavourzyme hydrolysates remained the most soluble and chickpea Flavourzyme hydrolysates showed the least solubility. Thermal data suggested that Alcalase reduced the protein denaturation temperature, leading to a loss of solubility upon thermal enzyme inactivation. The loss of solubility of hydrolysates was strongly associated with hydrogen bonding, which may result from the formation of polar peptide termini. These results challenge commonly accepted beliefs that hydrolysis inevitably improves solubility of plant proteins. Instead, it is shown that hydrolysis causes structural changes that result in aggregation, thus potentially limiting the application of enzymatic hydrolysis without the addition of further processing methods.

pH-shifting alters textural, thermal, and microstructural properties of mung bean starch-flaxseed protein composite gels

The objective of this study was to investigate the effect of pH-shifting on the textural and microstructural properties of mung bean starch (MBS)-flaxseed protein (FP) composite gels. Results showed that different pH-shifting treatments caused changes in hydrogen bond interactions and secondary structures in composite gels, leading to the formation of loose or compact gel networks. The pH 2-shifting modified protein and starch molecules with shorter chains tended to form smaller intermolecular aggregates, resulting in the formation of a looser gel network. For pH 12-shifting treatment, conformational change of FP caused the unfolding of protein and the exposure of more hydrophobic groups, which enhanced the hydrogen bond and hydrophobic interactions between polymers, contributing to the formation of a compact gel network. Furthermore, pH 12-shifting improved the water-holding capacity (WHC), storage modulus, and strength of gels, while pH 2-treated gels exhibited lower WHC, hardness, and gumminess due to the degradation of MBS and denaturation of FP caused by extreme acid condition. These findings suggest that pH-shifting can alter the gel properties of bi-polymeric starch-protein composite systems by affecting the secondary structures of proteins and the hydrogen bonding between the polymers, and provide a promising way for a wide application of FP in soft gel-type food production.