Interindividual and intraspecimen variability of 3-D bone microarchitectural parameters in iliac crest biopsies imaged by conventional micro-computed tomography

Porosity and surface curvature effects on the permeability and wall shear stress of trabecular bone: Guidelines for biomimetic scaffolds for bone repair

Scaffolds are an essential component of bone tissue engineering to provide support and create a physiological environment for cells. Biomimetic scaffolds are a promising approach to fulfill the requirements. Bone allografts are widely used scaffolds due to their mechanical and structural characteristics. The scaffold geometry is well known to be an important determinant of induced mechanical stimulation felt by the cells. However, the impact of allograft geometry on permeability and wall shear stress distribution is not well understood. This information is essential for designing biomimetic scaffolds that provide a suitable environment for cells to proliferate and differentiate. The present study investigates the effect of geometry on the permeability and wall shear stress of bone allografts at both macroscopic and microscopic scales. Our results concluded that the wall shear stress was strongly correlated with the porosity of the allograft. The level of wall shear stress at a local scale was also determined by the surface curvature characteristics. The results of this study can serve as a guideline for future biomimetic scaffold designs that provide a mechanical environment favorable for osteogenesis and bone repair.

A New Microarchitecture-Based Parameter to Predict the Micromechanical Properties of Bone Allografts

Scaffolds are an essential component of bone tissue engineering. They provide support and create a physiological environment for cells to proliferate and differentiate. Bone allografts extracted from human donors are promising scaffolds due to their mechanical and structural characteristics. Bone microarchitecture is well known to be an important determinant of macroscopic mechanical properties, but its role at the microscopic, i.e., the trabeculae level is still poorly understood. The present study investigated linear correlations between microarchitectural parameters obtained from X-ray computed tomography (micro-CT) images of bone allografts, such as bone volume fraction (BV/TV), degree of anisotropy (DA), or ellipsoid factor (EF), and micromechanical parameters derived from micro-finite element calculations, such as mean axial strain (ε_z) and strain energy density (W_e). DAEF, a new parameter based on a linear combination of the two microarchitectural parameters DA and EF, showed a strong linear correlation with the bone mechanical characteristics at the microscopic scale. Our results concluded that the spatial distribution and the plate-and-rod structure of trabecular bone are the main determinants of the mechanical properties of bone at the microscopic level. The DAEF parameter could, therefore, be used as a tool to predict the level of mechanical stimulation at the local scale, a key parameter to better understand and optimize the mechanism of osteogenesis in bone tissue engineering.

Contemporary kidney transplantation has a limited impact on bone microarchitecture

Bone microarchitecture is an important component of bone quality and disturbances may reduce bone strength and resistance to trauma. Kidney transplant recipients have an excess risk of fractures, and bone loss affecting both trabecular and cortical bone compartments have been demonstrated after kidney transplantation. The primary aim of this study was to investigate the impact of kidney transplantation on trabecular and cortical bone microarchitecture, assessed by histomorphometry and micro computed tomography (μCT). Iliac crest bone biopsies, analyzed by bone histomorphometry and μCT, were performed at time of kidney transplantation and 12 months post-transplantation in an unselected cohort of 30 patients. Biochemical markers of mineral metabolism and bone turnover were measured at both time-points. At 12 months post-transplantation, bone turnover was low in 5 (17%) and normal in 25 (83%) patients. By histomorphometry, bone remodeling normalized, with decreases in eroded perimeters (4.0 to 2.1%, p = 0.02) and number of patients with marrow fibrosis (41 to 0%, p < 0.001). By μCT, trabecular thickness (134 to 125 μM, p = 0.003) decreased slightly. Other parameters of bone volume and microarchitecture, including cortical thickness (729 to 713 μm, p = 0.73) and porosity (10.2 to 9.5%, p = 0.15), remained stable. We conclude that kidney transplantation with current immunosuppressive protocols has a limited impact on bone microarchitecture.

•

Bone structure after kidney transplantation was explored using biopsy, μCT, and DXA.

•

Modest trabecular bone loss was detected in the first post-transplant year.

•

Cortical thickness and porosity were overall stable post-transplant.

•

Contemporary kidney transplantation has minimal impact on bone microarchitecture.

Trabecular structure and composition analysis of human autogenous bone donor sites using micro-computed tomography

OBJECTIVES

To evaluate the bone microstructure of autogenous graft bone in elderly people (mean age, 66 years), we compared the bone volume/total volume and bone mineral density of four donor sites that are commonly harvested for maxillofacial surgery and dental implant treatments, using X-ray micro-computed tomography.

METHODS

Eighteen Japanese cadavers were included in this study. Overall, 66 harvested bones (mandibular symphysis, mandibular ramus, ilium, and tibia) were studied. Micro-computed tomography scans of four sites were performed to analyze the trabecular structures, bone mineral density, and bone volume/total volume in these bones.

RESULTS

The mandibular symphysis bones showed the highest bone volume/total volume and bone mineral density at the four sites. There was a significant difference in the bone volume/total volume between the mandibular symphysis and tibia groups. There was also a significant difference in bone mineral density between the mandibular symphysis group and the ilium and tibia groups. In the three-dimensional observations, the structures of the mandibular trabecular were plate-type. The structures of the tibial bone were mixtures of plate- and rod-types. In the ilium, most trabecula were rod-shaped.

CONCLUSIONS

Mandibular symphysis and ramus had a higher bone volume/total volume and bone mineral density of the four sites and did not show regressive changes in our findings. Mandibular bone is the most suitable source of autogenous graft bone material because of its superior bone quality and quantity.

Relationships Among Bone Morphological Parameters and Mechanical Properties of Cadaveric Human Vertebral Cancellous Bone

Mechanical properties and morphological features of the vertebral cancellous bone are related to resistance to fracture and capability of withstanding surgical treatments. In particular, vertebral strength is related to its elastic properties, whereas the ease of fluid motion, related to the success of incorporation orthopedic materials (eg, bone cement), is regulated by the hydraulic permeability (K). It has been shown that both elastic modulus and permeability of a material are affected by its morphology. The objective of this study was to establish relations between local values of K and the aggregate modulus (H), and parameters descriptive of the bone morphology. We hypothesized that multivariate statistical models, by including the contribution of several morphology parameters at once, would provide a strong correlation with K and H of the vertebral cancellous bone. Hence, μCT scans of human lumbar vertebra were used to determine a set of bone morphology descriptors. Subsequently, indentation tests on the bone samples were conducted to determine local values of K and H. Finally, a multivariate approach supported by principal component analysis was adopted to develop predictive statistical models of bone permeability and aggregate modulus as a function of bone morphology descriptors. It was found that linear combinations of bone volume fraction, trabecular thickness, trabecular spacing, structure model index, connectivity density, and degree of anisotropy provide a strong correlation (R 2 ~ 76%) with K and a weaker correlation (R 2 ~ 47%) with H. The results of this study can be exploited in computational mechanics frameworks for investigating the potential mechanical behavior of human vertebra and to develop strategies to treat or prevent pathological conditions such as osteoporosis, age-related bone loss, and vertebral compression fractures. © 2020 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

Structural and Metabolic Assessment of Bone

The assessment of bone structure and metabolism should focus on the bone strength. Many factors are involved, and although bone density is an important component, it is not the same as bone strength. Other aspects of bone quality include bone volume, micro-architecture, material composition, and ability to repair damage. This chapter briefly reviews some of the methods that can be used to assess both density and quality of bone. Non-invasive measurements of density or structure include dual X-ray absorptiometry (DXA), quantitative computed tomography, ultrasound, and magnetic resonance imaging. DXA is most widely used and has advantages of safety and accessibility, but there are limitations in the interpretation of the results, and in clinical practice positioning errors are frequently seen. Invasive methods are used primarily for research. Samples of bone can be used to measure structure by histology as well as micro-computed tomography and infra-red spectroscopy or backscattered electron microscopy. Force can be directly applied to bone samples to measure the bones strength. Impact microindentation is a new minimally invasive technique that measures bone hardness. Metabolic assessment includes blood and urine tests that reflect diseases that cause bone loss, particularly problems with mineral metabolism. Tetracycline-labelled bone biopsies are the standard for measuring bone formation. Non-invasive biochemical tests of bone formation and resorption can evaluate a patient's skeletal physiology.

Suppression Effect of Astaxanthin on Osteoclast Formation In Vitro and Bone Loss In Vivo

Osteoporosis is characterized by a reduction of the bone mineral density (BMD) and microarchitectural deterioration of the bone, which lead to bone fragility and susceptibility to fracture. Astaxanthin (AST) has a variety of biological activities, such as a protective effect against asthma or neuroinflammation, antioxidant effect, and decrease of the osteoclast number in the right mandibles in the periodontitis model. Although treatment with AST is known to have an effect on inflammation, no studies on the effect of AST exposure on bone loss have been performed. Thus, in the present study, we examined the antiosteoporotic effect of AST on bone mass in ovariectomized (OVX) mice and its possible mechanism of action. The administration of AST (5, 10 mg/kg) for 6 weeks suppressed the enhancement of serum calcium, inorganic phosphorus, alkaline phosphatase, total cholesterol, and tartrate-resistant acid phosphatase (TRAP) activity. The bone mineral density (BMD) and bone microarchitecture of the trabecular bone in the tibia and femur were recovered by AST exposure. Moreover, in the in vitro experiment, we demonstrated that AST inhibits osteoclast formation through the expression of the nuclear factor of activated T cells (NFAT) c1, dendritic cell-specific transmembrane protein (DC-STAMP), TRAP, and cathepsin K without any cytotoxic effects on bone marrow-derived macrophages (BMMs). Therefore, we suggest that AST may have therapeutic potential for the treatment of postmenopausal osteoporosis.

Age-related changes in vertebral and iliac crest 3D bone microstructure--differences and similarities

Age-related changes of vertebra and iliac crest 3D microstructure were investigated, and we showed that they were in general similar. The 95th percentile of vertebral trabecular thickness distribution increased with age for women. Surprisingly, vertebral and iliac crest bone microstructure was only weakly correlated (r = 0.38 to 0.75), despite the overall similar age-related changes.

INTRODUCTION

The purposes of the study were to determine the age-related changes in iliac and vertebral bone microstructure for women and men over a large age range and to investigate the relationship between the bone microstructure at these skeletal sites.

METHODS

Matched sets of transiliac crest bone biopsies and lumbar vertebral body (L2) specimens from 41 women (19-96 years) and 39 men (23-95 years) were micro-computed tomography (μCT) scanned, and the 3D microstructure was quantified.

RESULTS

For both women and men, bone volume per total volume (BV/TV), connectivity density (CD), and trabecular number (Tb.N) decreased significantly, while structure model index (SMI) and trabecular separation (Tb.Sp) increased significantly with age at either skeletal site. Vertebral trabecular thickness (Tb.Th) was independent of age for both women and men, while iliac Tb.Th decreased significantly with age for men, but not for women. In general, the vertebral and iliac age-related changes were similar. The 95th percentile of the Tb.Th distribution increased significantly with age for women but was independent of age for men at the vertebral body, while it was independent of age for either sex at the iliac crest. The Tb.Th probability density functions at the two skeletal sites became significantly more similar with age for women, but not for men. The microstructural parameters at the iliac crest and the vertebral bodies were only moderately correlated from r = 0.38 for SMI in women to r = 0.75 for Tb.Sp in men.

CONCLUSION

Age-related changes in vertebral and iliac bone microstructure were in general similar. The iliac and vertebral Tb.Th distributions became more similar with age for women. Despite the overall similar age-related changes in trabecular bone microstructure, the vertebral and iliac bone microstructural measures were only weakly correlated (r = 0.38 to 0.75).

Evaluating bone quality in patients with chronic kidney disease

Bone of normal quality and quantity can successfully endure physiologically imposed mechanical loads. Chronic kidney disease-mineral and bone disorder (CKD-MBD) adversely affects bone quality through alterations in bone turnover and mineralization, whereas bone quantity is affected through changes in bone volume. Changes in bone quality can be associated with altered bone material, structure, or microdamage, which can result in an elevated rate of fracture in patients with CKD-MBD. Fractures cannot always be explained by reduced bone quantity and, therefore, bone quality should be assessed with a variety of techniques from the macro-organ level to the nanoscale level. In this Review, we demonstrate the importance of evaluating bone from multiple perspectives and hierarchical levels to understand CKD-MBD-related abnormalities in bone quality. Understanding the relationships between variations in material, structure, microdamage, and mechanical properties of bone in patients with CKD-MBD should aid in the development of new modalities to prevent, or treat, these abnormalities.

Prospective histomorphometric and DXA evaluation of bone remodeling in imatinib-treated CML patients: evidence for site-specific skeletal effects

CONTEXT

Imatinib is a tyrosine kinase inhibitor that has been successfully used to treat Philadelphia chromosome-positive chronic myeloid leukemia (CML) and Kit(+) gastrointestinal stromal tumors. We have previously shown that imatinib therapy is associated with an increase in trabecular bone volume.

OBJECTIVE

In the present study, we performed a prospective analysis of bone indices in imatinib-treated CML patients to determine the mechanism responsible for this altered bone remodeling. DESIGN, PATIENTS, AND INTERVENTION: This study assessed the effects of high-dose (600 mg/d) imatinib on bone parameters in newly diagnosed chronic-phase Philadelphia chromosome-positive CML patients (n = 11) enrolled in the TIDEL II study. At baseline and after 6, 12, and 24 months of treatment, serum markers of bone remodeling were quantitated, dual-energy x-ray absorptiometry analysis of bone mineral density (BMD) was carried out, and a bone biopsy was collected for histological and micro-computed tomography analysis.

RESULTS

Our studies show that the increase in trabecular bone volume and trabecular thickness after imatinib treatment was associated with a significant decrease in osteoclast numbers, accompanied by a significant decrease in serum levels of a marker of osteoclast activity. In contrast, osteoblast numbers were not altered by up to 24 months of imatinib treatment. Notably, we also found that imatinib caused a site-specific decrease in BMD at the femoral neck.

CONCLUSIONS

These data suggest that imatinib therapy dysregulates bone remodeling, causing a generalized decrease in osteoclast number and activity that is not counterbalanced by a decrease in osteoblast activity, leading to increased trabecular bone volume. Further long-term investigations are required to determine the causes and consequences of the site-specific decrease in BMD at the femoral neck.

Influence of trabecular microstructure and cortical index on the complexity of proximal humeral fractures

OBJECTIVES

Poor bone quality increases the susceptibility to fractures of the proximal humerus. It is unclear whether local trabecular and cortical measures influence the severity of fracture patterns. The goal of this study was to assess parameters of trabecular and cortical bone properties and to compare these parameters with the severity of fractures and biomechanical testing.

METHODS

Twenty patients with displaced proximal humeral fractures planned for osteosynthesis were included. Fractures were classified as either 2-part fractures or complex fractures. Bone after core drilling was harvested during surgery from the humeral head in each patient. Twenty bone cores obtained from nonpaired cadaver humeral heads served as nonfractured controls. Micro-CT (μCT) was performed and bone volume/total volume (BV/TV), connectivity density (CD), trabecular number (Tb.N), trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and bone mineral density (BMD) were assessed. The cortical index (CI) was determined from AP plain films. Biomechanical testing was done after μCT scanning by axially loading until failure, and ultimate strength and E modulus were recorded.

RESULTS

BV/TV, BMD and CD showed moderate to strong correlations with biomechanical testing (r = 0.45-0.76, all p < 0.05). No significant differences were detected between the 2-part and complex fracture groups and controls regarding μCT and biomechanical parameters. CI was not significantly different between the 2-part and complex fracture groups.

CONCLUSIONS

In our study population local trabecular bone structure and cortical index could not predict the severity of proximal humeral fractures in the elderly. Complex fractures do not necessarily imply lower bone quality compared to simple fractures.

High-resolution computed tomography for clinical imaging of bone microarchitecture

BACKGROUND

The role of bone structure, one component of bone quality, has emerged as a contributor to bone strength. The application of high-resolution imaging in evaluating bone structure has evolved from an in vitro technology for small specimens to an emerging clinical research tool for in vivo studies in humans. However, many technical and practical challenges remain to translate these techniques into established clinical outcomes.

QUESTIONS/PURPOSES

We reviewed use of high-resolution CT for evaluating trabecular microarchitecture and cortical ultrastructure of bone specimens ex vivo, extension of these techniques to in vivo human imaging studies, and recent studies involving application of high-resolution CT to characterize bone structure in the context of skeletal disease.

METHODS

We performed the literature review using PubMed and Google Scholar. Keywords included CT, MDCT, micro-CT, high-resolution peripheral CT, bone microarchitecture, and bone quality.

RESULTS

Specimens can be imaged by micro-CT at a resolution starting at 1 μm, but in vivo human imaging is restricted to a voxel size of 82 μm (with actual spatial resolution of ~ 130 μm) due to technical limitations and radiation dose considerations. Presently, this mode is limited to peripheral skeletal regions, such as the wrist and tibia. In contrast, multidetector CT can assess the central skeleton but incurs a higher radiation burden on the subject and provides lower resolution (200-500 μm).

CONCLUSIONS

CT currently provides quantitative measures of bone structure and may be used for estimating bone strength mathematically. The techniques may provide clinically relevant information by enhancing our understanding of fracture risk and establishing the efficacy of antifracture for osteoporosis and other bone metabolic disorders.

Reproducibility and agreement of micro-CT and histomorphometry in human trabecular bone with different metabolic status

The use of micro-computed tomography (micro-CT) to study bone microstructure is continuously increasing. Thus, it is important to ensure that micro-CT can differentiate healthy and pathological bone. This study aimed to determine whether the reproducibility of bone histomorphometry and micro-CT, and agreement between the techniques, vary in bone samples with different metabolic status. Iliac crest biopsies (n = 36) were obtained from healthy subjects (n = 10) and from patients with osteoporosis (OP) (n = 15) or renal osteodystrophy (ROD) (n = 11). Micro-CT and histomorphometry analyses were repeated twice. Results were analyzed in separate groups and after pooling the data. Bone histomorphometry detected generally known differences between the diseases, whereas micro-CT did not detect differences between normal and ROD samples as effectively. Repeated measurements for BV/TV, Tb.Th, Tb.N, and Tb.Sp exhibited linear correlation coefficients (ρ) of 0.87-0.92 [coefficients of variations (CV), 8.3-27.2%] for histomorphometry and of 0.66-0.94 (CV, 4.4-23.4%) for micro-CT. There were no significant differences in reproducibility among samples from different study groups. Correlations between BV/TV (micro-CT) and mineralized bone volume (Md.V/TV, histomorphometry) were weaker than between BV/TV (micro-CT) and BV/TV (histomorphometry). When comparing the techniques, BV/TV, Tb.Th, and Tb.N displayed moderate correlations (ρ = 0.39-0.62, P < 0.05), and the agreement for BV/TV was highest in OP samples. The agreement between the techniques using clinical bone samples was moderate. Especially, micro-CT was less effective than bone histomorphometry in differentiating ROD from normal samples. The reproducibility was not affected by the health status of bone. Histomorphometry is still needed in clinical practice to study the remodeling balance in bone, and the methods are complementary.

Structural parameters of normal and osteoporotic human trabecular bone are affected differently by microCT image resolution

This study employed microCT to investigate whether image resolution affects bone structural parameters differently in healthy normal and osteoporotic trabecular bone. With increasing image voxel size, the originally detected differences between sample groups diminished. The results suggest that structural differences may not be reliably detected with clinical scanners.

INTRODUCTION

Structural parameters of bone reflect its health status, but are highly dependent on the image resolution. We hypothesized that image resolution affects bone structural parameters differently in normal and osteoporotic trabecular bone.

METHODS

Human trabecular bone samples from the iliac crest and the knee were analyzed (normal n = 11, osteoporotic n = 15) using a high-resolution microCT (14 or 18 µm voxel sizes). Images were re-sampled to voxel sizes 1-16 times larger than the original image and thresholded with global or local adaptive algorithms. Absolute and normalized values of each structural parameter were calculated, and the effect of decreasing image resolution was compared between the normal and osteoporotic samples.

RESULTS

Normal and osteoporotic samples had different (p < 0.05) absolute bone volume fractions. However, the normalized values showed that the osteoporotic samples were more prone to errors (p < 0.05) with increased voxel size. The absolute values of trabecular number, trabecular separation, degree of anisotropy, and structure model index were different between the groups at the original voxel size (p < 0.05), but at voxel sizes between 60 and 110 µm, those differences were no longer significant.

CONCLUSIONS

The results suggest that structural differences between osteoporotic and normal trabecular bone may not be reliably detected with clinical CT scanners providing image voxel sizes above 100 µm.