Bacterial colonization in the apical part of extracted human teeth following root-end resection and filling: a confocal laser scanning microscopy study

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study

BACKGROUND

Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics.

AIM OF THE STUDY

The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM).

MATERIALS AND METHODS

In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests.

RESULTS

The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen.

CONCLUSION

Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

CLSM-Guided Imaging for Quantifying Endodontic Disinfection

Elimination of microbes in the root canal system is crucial for achieving long-term success in endodontic treatment. Further efforts in study design and standardization are needed in order to improve the validity and comparability of in vitro results on endodontic disinfection procedures, in turn improving clinical outcomes. This study optimizes two models at all steps: tooth selection, pretreatment, inoculation method (by growth or centrifugation), and confocal laser scanning microscopy (CLSM)-guided imaging of LIVE/DEAD-stained specimens. Individual anatomical conditions lead to substantial differences in penetration depth. Sclerosis grading (SCG), a classification system introduced in this study, provides information about the sclerosis status of the dentine and is helpful for careful, specific, and comparable tooth selection in in vitro studies. Sonically activated EDTA for the pretreatment of roots, inoculation of Enterococcus faecalis in an overflow model, 3-4 weeks of incubation, as well as polishing of dentine slices before staining, led to advances in the visualization of bacterial penetration and irrigation depths. In contrast, NaOCl pretreatment negatively affected performance reproducibility and should be avoided in any pretreatment. Nonsclerotized teeth (SCG0) can be used for microbial semilunar-shaped inoculation by centrifugation as a "quick-and-dirty" model for initial orientation. In conclusion, CLSM-guided imaging for quantifying endodontic infection/disinfection is a very powerful method after the fine-tuning of materials and methods.

Minimally invasive management of vital teeth requiring root canal therapy

The present study aimed to investigate the possible use of a non-instrumentation technique including blue light irradiation for root canal cleaning. Extracted human single rooted teeth were selected. Nine different groups included distilled water, NaOCl, intra-canal heated NaOCl, and NaOCl + EDTA irrigation after either instrumentation or non-instrumentation, and a laser application group following non-instrumentation technique. The chemical assessment of the root canal dentine was evaluated using energy dispersive spectroscopy (EDS) and Fourier transform infrared (FT-IR) spectroscopy. Surface microstructural analyses were performed by using scanning electron microscopy (SEM). The antimicrobial efficacy of different preparation techniques was evaluated using microbial tests. Light application didn't change the calcium/phosphorus, carbonate/phosphate and amide I/phosphate ratios of the root canal dentin. The root canal dentin preserved its original chemistry and microstructure after light application. The instrumentation decreased the carbonate/phosphate and amide I/phosphate ratios of the root canal dentin regardless of the irrigation solution or technique (p < 0.05). The application of light could not provide antibacterial efficacy to match the NaOCl irrigation. The NaOCl irrigation both in the non-instrumentation and instrumentation groups significantly reduced the number of bacteria (p < 0.05). The use of minimally invasive root canal preparation techniques where the root canal is not instrumented and is disinfected by light followed by obturation with a hydraulic cement sealer reduced the microbial load and preserved the dentin thus may be an attractive treatment option for management of vital teeth needing root canal therapy.

Reparative dentin formation as a possible factor influencing the penetrability of dentin in human teeth with apical periodontitis: an ex vivo study

BACKGROUND

There is still a lack of knowledge regarding the permeability and configuration of infected root dentin. The aim of this ex vivo study was to compare the dentin penetrability of healthy teeth and necrotic teeth with apical periodontitis by evaluating the penetration of sodium hypochlorite (NaOCl) and to analyze the histopathological features of root dentin.

METHODS

Forty-eight molars were collected and divided into two groups. The clinical diagnosis for one group was pulp necrosis with apical periodontitis and the pulp and periapex were normal in the other group. Forty-eight straight roots were divided into two groups: infected and healthy. First, all root canals were stained with 2% methylene blue to visualize penetration after standard root canal instrumentation and irrigation. Transverse sections were obtained, and the dye penetration parameters were measured. The cross sections were processed to 20-30 μm and stained with hematoxylin and eosin for observation of the histopathological changes in the root dentin.

RESULTS

The maximum penetration depth, median penetration depth and penetration percentage of NaOCl solutions, in infected root canals were significantly lower than those in healthy root canals. The histopathological analysis showed that the frequency of reparative dentin formation in infected root canals was significantly greater than that in healthy root canals.

CONCLUSIONS

The dentin penetrability of teeth with necrotic teeth and apical periodontitis was more superficial during root canal irrigation than that of healthy teeth. The histopathological changes in infected radicular dentin, namely the formation of reparative dentin, might be associated with the lower permeability of dentin tubules in human teeth with apical periodontitis.

Efficacy of Endodontic Disinfection Protocols in an E. faecalis Biofilm Model-Using DAPI Staining and SEM

The aim of this study was to investigate the antimicrobial efficacy of different disinfection protocols in a novel Enterococcus faecalis biofilm model based on a visualization method and to evaluate the potential alteration of dentinal surface. A total of 120 extracted human premolars were allocated to 6 groups with different irrigation protocols. The assessment of the effectiveness of each protocol and the alteration of dentinal surface were visualized by using SEM and fluorescence microscopy (DAPI). A dense E. faecalis biofilm with a penetration depth of 289 μm (medial part of the root canal) and 93 μm (apical part) validated that the biofilm model had been successfully implemented. A significant difference between the 3% NaOCl groups and all the other groups in both observed parts of the root canal (p < 0.05) was detected. However, the SEM analysis revealed that the dentinal surface in the 3% NaOCl groups was severely altered. The established biofilm model and the visualization method based on DAPI are appropriate for bacterial quantification and evaluation of the depth effect of different disinfection protocols in the root canal system. The combination of 3% NaOCl with 20% EDTA or MTAD with PUI allows the decontamination of deeper dentine zones within the root canal but simultaneously alters the dentinal surface.

Root canal cleaning in roots with complex canals using agitated irrigation fluids

The internal topography of the root canal is complex, especially for the mesial root of the permanent first molar. In response to such challenges, enhanced irrigation protocols have been developed, using laser pulses to agitate fluids and enhance the removal of microbial deposits. The aim of this laboratory study was to assess the effectiveness of laser agitation of sodium hypochlorite in removing multispecies biofilms grown in the mesial root of the permanent first molars. The five agitation groups (N = 12 roots for each) were: 940 nm diode laser (superpulsed mode, 50 μs/pulses at 20 Hz using 20 mJ/pulse); 1064 nm Nd: YAG laser (200 μs/pulse at 20 Hz using 20 mJ/pulse); 2940 nm Er: YAG laser (50 μs/pulse at 15 Hz using a 400/14 conical tip in the SWEEPS protocol, with 20 mJ/pulse); passive ultrasonic agitation at 28 kHz (positive control); and irrigation with a 27-gauge side vented needle for 2 min per canal (negative control). Biofilm removal was assessed by confocal microscopic imaging of root slices at 1, 4 and 7 mm from the root apex. None of the tested methods were effective in completely eradicating biofilm from the most confined regions of the root canal system. The greatest challenge was cleaning the isthmus regions. There was a positive correlation between canal cleaning and isthmus cleaning, suggesting that increased effectiveness in cleaning root canal walls is associated with more effective isthmus cleaning. Wider and narrow isthmuses were cleaned better than long and narrow isthmuses.

Antimicrobial evaluation of polytetrafluoroethylene used as part of temporary restorations: An ex vivo study

The use of polytetrafluoroethylene (PTFE) tape as the base layer of temporary restorations had gained popularity mainly due to the ease of manipulation. The aim of this study was to assess whether this method changes the potential for bacterial growth and leakage of temporary restorations. The direct contact test and live/dead fluorescent staining were used for comparing Enterococcus faecalis growth and biofilm formation on PTFE, composite, intermediate restorative material (IRM) and Coltosol F. Confocal laser scanning microscopy was employed to evaluate E. faecalis penetration through 2 mm of PTFE, IRM or Coltosol F placed on the bottom of the pulp chamber and into radicular dentinal tubules in extracted maxillary third molars. The results demonstrated that E. faecalis grows on and penetrates through PTFE significantly more than it does with IRM and Coltosol F, revealing its comparably reduced overall antimicrobial sealing ability when placed as the base part of temporary restorations.

Quantification of Bacterial DNA from Infected Human Root Canals Using qPCR and DAPI after Disinfection with Established and Novel Irrigation Protocols

The removal of bacterial infections within the root canal system is still a challenge. Therefore, the cleansing effect of established and new irrigation-protocols (IP) containing silver diamine fluoride (SDF) 3.8% on the whole root canal system was analyzed using quantitative PCR (qPCR) and 4′,6-diamidino-phenylindole-(DAPI)-staining. Extracted human premolars were instrumented up to F2 (ProTaper Gold) under NaCl 0.9% irrigation and incubated with Enterococcus faecalis for 42 days. Subsequently, different ultrasonically agitated IP were applied to the roots: control (no irrigation), 1. NaOCl 3%, EDTA 20%, CHX 2%, 2. NaOCl 3%, EDTA 20%, 3. NaOCl 3%, EDTA 20%, SDF 3.8%, 4. SDF 3.8%, and 5. NaCl 0.9%. One half of the root was investigated fluorescent-microscopically with DAPI. The other half was grinded in a cryogenic mill and the bacterial DNA was quantified with qPCR. The qPCR results showed a statistically significant reduction of bacteria after the application of IP 1, 2, and 3 compared to the control group. While IP 4 lead to a bacterial reduction which was not significant, IP 5 showed no reduction. These data corresponded with DAPI staining. With qPCR a new molecular-biological method for the investigation of the complete root canal system was implemented. The novel IP 3 had an equally good cleansing effect as the already established IP.

Quantification of Bacterial Colonization in Dental Hard Tissues Using Optimized Molecular Biological Methods

Bacterial infections of root canals and the surrounding dental hard tissue are still a challenge due to biofilm formation as well as the complex root canal anatomy. However, current methods for analyzing biofilm formation, bacterial colonization of root canals and dental hard tissue [e.g., scanning electron microscopy, confocal laser scanning microscopy (CLSM) or determination of colony forming units (CFU)] are time-consuming and only offer a selective qualitative or semi-quantitative analysis. The aim of the present study is the establishment of optimized molecular biological methods for DNA-isolation and quantification of bacterial colonization via quantitative PCR (qPCR) from dental hard tissue. Root canals of human premolars were colonized with Enterococcus faecalis. For isolation of DNA, teeth were then grinded with a cryo mill. Since the hard tissues dentin and especially enamel belong to the hardest materials in the human organism, the isolation of bacterial DNA from root dentin is very challenging. Therefore, treatment steps for the isolation of DNA from grinded teeth were systematically analyzed to allow improved recovery of bacterial DNA from dental hard tissues. Starting with the disintegration of the peptidoglycan-layer of bacterial cells, different lysozyme solutions were tested for efficacy. Furthermore, incubation times and concentrations of chelating agents such as EDTA were optimized. These solutions are crucial for the disintegration of teeth and hence improve the accessibility of bacterial DNA. The final step was the determination of prior bacterial colonization of each root canal as determined by qPCR and comparing the results to alternative methods such as CFU. As a result of this study, optimized procedures for bacterial DNA-isolation from teeth were established, which result in an increased recovery rate of bacterial DNA. This method allows a non-selective and straightforward procedure to quantify bacterial colonization from dental hard tissue. It can be easily adapted for other study types such as microbiome studies and for comparable tissues like bones.

The Invasion of Bacterial Biofilms into the Dentinal Tubules of Extracted Teeth Retrofilled with Fluorescently Labeled Retrograde Filling Materials

In this study, we evaluated the invasion of bacteria into the dentinal tubules of retrofilled extracted human teeth, and the influence of different fluorescently labeled retrograde filling materials on the bacterial invasion and viability, by means of confocal laser scanning microscopy (CLSM). The root apices of extracted teeth were cut, prepared, and filled retrogradely using either intermediate restorative material (IRM), mineral trioxide aggregate (MTA), or Biodentine. The roots were filled with Enterococcus faecalis bacteria from their coronal part for 21 days. Then, 3-mm-long apical segments were cut to get root axial slices, and the bacteria were fluorescently stained and evaluated by CLSM. Bacterial penetration into the dentinal tubules favored the bucco-lingual directions. The filling materials penetrated up to 957 µm into the tubuli, and the bacteria, up to 1480 µm (means: 130 and 167 μm, respectively). Biodentine fillings penetrated less and the associated bacteria penetrated deeper into the tubuli compared to MTA or IRM (p = 0.004). Deeper filling penetration was associated with shallower penetration of both dead and live, or live alone, bacteria (p = 0.015). In conclusion, the current study enables better understanding of the microbiological–pathological course after endodontic surgical procedures. It was found that even with retrograde fillings, bacteria invade deep into the dental tubules, where deeper filling penetration prevents deeper penetration of the bacteria and adversely affects the viability of the bacteria.

Micro-computed tomographic evaluation of the flow and filling ability of endodontic materials using different test models

Objectives

This study compared the flow and filling of several retrograde filling materials using new different test models.

Materials and Methods

Glass plates were manufactured with a central cavity and 4 grooves in the horizontal and vertical directions. Grooves with the dimensions used in the previous study (1 × 1 × 2 mm; length, width, and height respectively) were compared with grooves measuring 1 × 1 × 1 and 1 × 2 × 1 mm. Biodentine, intermediate restorative material (IRM), and mineral trioxide aggregate (MTA) were evaluated. Each material was placed in the central cavity, and then another glass plate and a metal weight were placed over the cement. The glass plate/material set was scanned using micro-computed tomography. Flow was calculated by linear measurements in the grooves. Central filling was calculated in the central cavity (mm³) and lateral filling was measured up to 2 mm from the central cavity.

Results

Biodentine presented the least flow and better filling than IRM when evaluated in the 1 × 1 × 2 model. In a comparison of the test models, MTA had the most flow in the 1 × 1 × 2 model. All materials had lower lateral filling when the 1 × 1 × 2 model was used.

Conclusions

Flow and filling were affected by the size of the test models. Higher grooves and materials with greater flow resulted in lower filling capacity. The test model measuring 1 × 1 × 2 mm showed a better ability to differentiate among the materials.

The influence of centrifugation and inoculation time on the number, distribution, and viability of intratubular bacteria and surface biofilm in deciduous and permanent bovine dentin

The present study aimed to assess the influence of centrifugation and inoculation time on the number, distribution, and viability of intratubular bacteria and surface monospecies E. faecalis biofilm.

MATERIALS AND METHODS

Forty-four semicylindrical specimens cut from primary (n = 22) and permanent (n = 22) bovine teeth were randomly assigned to the experimental groups. Teeth of each type were inoculated with E. faecalis with and without centrifugation for 1 and 14 days. The number, localization, viability of bacteria and depth of their penetration were assessed with bacterial culturing of dentin shavings, scanning electron microscopy (SEM) and confocal laser electron microscopy (CLSM). Three-way ANOVA with post-hoc Tukey test were used to assess the influence of different experimental setups on dentin infection.

RESULTS

Severe dentin infection was observed in permanent and deciduous teeth after centrifugation and 1-day incubation: bacteria reached the full length of dentinal tubules and colony-forming units were too numerous to count. The volume of green fluorescence didn't differ significantly in permanent teeth compared with deciduous (p = 1.0). After 1-day stationary inoculation, small number of cultivable bacteria and few viable bacteria in dentinal tubules were found in both groups. After 14-day stationary inoculation, the dentin infection according to CLSM was deeper in deciduous teeth compared with permanent (p = 0.006 and p = 0.019 for centrifugation and stationary inoculation, respectively).

CONCLUSION

The most even and dense dentin infection was observed in primary and permanent bovine teeth after centrifugation and 1-day inoculation, and in deciduous teeth after 14-day stationary inoculation.

The Effect of Pulpotomy Base Material on Bacterial Penetration and Proliferation for Pulpotomized Primary Molar Teeth: A Confocal Laser Scanning Microscopy Study

Introduction: the study aimed to evaluate Enterococcus Faecalis colonization in the pulp chamber in pulpotomized extracted human teeth filled by different pulpotomy base materials (PBMs), using confocal laser scanning microscopy (CLSM). Study design: Cavity preparations were made in 70 extracted primary molars. The pulp chambers were filled using either Intermediate restorative material (IRM), Mineral Trioxide Aggregate (MTA) or Glass ionomer (GI). Twenty-five teeth served controls. The specimens were sterilized, and coronally filled with bacterial suspension for 21 days. The specimens were cut through the furcation area, stained using LIVE/DEAD BacLight Bacterial Viability Kit and evaluated using CLSM. Results: The extent of fluorescent staining was larger in the GI group, compared to the IRM and MTA groups, and larger in the IRM group compared to the MTA group (P<0.05). The minimal and maximal bacterial penetration depths into the dentinal tubules were 55 and 695&mu;m, respectively (mean 310&mu;m), without differences between the materials (GI, IRM, MTA, p>0.05). The ratio of live bacteria to dead bacteria within the evaluated areas was higher in the GI group compared to the IRM and the MTA groups, and higher in the IRM group compared to the MTA group (P<0.05). There were no differences between the mesial, distal and apical parts in any of the evaluations (p>0.05). Conclusions: bacteria colonize the interface between the PBM and dentin and penetrate deeply into the dentinal tubules. The extent and the vitality of the colonized bacteria may be affected by the type of PBM.

Efficacy of Mineral Trioxide Aggregate and Biodentine as Apical Barriers in Immature Permanent Teeth: A Microbiological Study

Aim

To compare the bacterial leakage of mineral trioxide aggregate (MTA) and biodentine when used as an apical plug in immature permanent teeth.

Materials and methods

It was a randomized double-blind in vitro study. A total of 60 teeth were divided into 2 groups of MTA and biodentine, which were further divided into 2 subgroups (n = 30) each based on the apical plug thickness of 2 and 4 mm. The teeth were cleaned and shaped; root-end resection and canal preparation were done. Mineral trioxide aggregate and biodentine were mixed and filled as apical plugs of 2 or 4 mm thickness. Enterococcus faecalis was used to assess the bacterial leakage of the filled samples.

Statistical analysis

The comparison between the two groups was done by Chi-square test for categorical data. All p values <0.05 were considered as statistically significant.

Results

A 4 mm apical plug of biodentine showed the least amount of bacterial leakage followed by 2 mm MTA and 4 mm MTA. A 2 mm apical plug of biodentine showed the maximum bacterial leakage. But this was not statistically significant over a period of 3 months. There was a statistically significant difference (p value = 0.042) among the total number of samples that leaked in the 2 and 4 mm biodentine group.

Conclusion

Mineral trioxide aggregate and biodentine had a similar apical sealing ability. The apical sealing ability of biodentine at 4 mm thickness was greater than 2 mm thickness.

Clinical significance

The apical leakage of the materials used in apexification is one of the main causes of endodontic failures in immature necrotic teeth. Materials like MTA and biodentine have overcome various drawbacks of calcium hydroxide as apexification material. The thickness of the apical plug plays an important role in preventing any microorganism from entering the periapical area, hence maintaining an adequate seal.

How to cite this article

Abbas A, Kethineni B, Puppala R, et al. Efficacy of MTA and Biodentine as Apical Barriers in Immature Permanent Teeth: A Microbiological Study. Int J Clin Pediatr Dent 2020;13(6):656-662.

Pattern of Disinfection of Root Canal Dentin by Alternated Acid-Base Irrigating Regimen

Objective

To quantify Enterococcus faecalis density in root canal dentin after chemomechanical preparation (CMP) using alternated irrigating regimen.

Methodology

Root canals (RC) were contaminated with E. faecalis (ATCC 19433) for 3 weeks and evident biofilms were obtained. After initial sampling (S1), the CMP was aided by irrigants: saline solution (control; n=12), a conventional regimen (CR) (group 1; n=12) using 5.25% NaOCl and a final rinse with 17% EDTA, and an alternating regimen (AR) of intercalated use of NaOCl and EDTA (group 2, n=12), followed by a second sampling (S2). After 2 weeks, S3 was obtained. Two roots were analyzed by scanning electron microscopy. Each root was divided into cervical, mild, and apical segments and sampling of the superficial (n=90) and deep (n=90) dentin layers was obtained using Gates-Glidden burs. The E. faecalis density (CFU/mg) in log₁₀ was categorized as residual (0 > 0.2), moderate (0.2 ≥ 0.5), or elevated (> 0.5). The prevalence of positive samples in BHI and BHI-A was analyzed by Pearson's chi-square test. The data were normalized by a log₁₀ transformation of CFU and were analyzed by one-way ANOVA and Tukey's tests.

Results

Biofilms were observed only in the control root canal walls. Topographically, the controls and CR showed similar distributions of E. faecalis in the dentin. Microbiologically positive root canals harbored much E. faecalis in the adjacent dentin (p < 0.05). Irrigating saline provided moderate density of E. faecalis in the dentin while CR and AR resulted in a residual density of microorganisms (p < 0.05).

Conclusions

The Enterococcus faecalis density in dentin was influenced by the irrigating regimen and the microbiological status of the root canal. The CMP aided by the alternating regimen interfered with the recolonization of the root canal and topographic distribution of Enterococcus in root dentin.

Reformulated mineral trioxide aggregate components and the assessments for use as future dental regenerative cements

Mineral trioxide aggregate, which comprises three major inorganic components, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A), is promising regenerative cement for dentistry. While mineral trioxide aggregate has been successfully applied in retrograde filling, the exact role of each component in the mineral trioxide aggregate system is largely unexplored. In this study, we individually synthesized the three components, namely, C3S, C2A, and C3A, and then mixed them to achieve various compositions (a total of 14 compositions including those similar to mineral trioxide aggregate). All powders were fabricated to obtain high purity. The setting reaction of all cement compositions was within 40 min, which is shorter than for commercial mineral trioxide aggregate (~150 min). Over time, the pH of the composed cements initially showed an abrupt increase and then plateaued (pH 10-12), which is a typical behavior of mineral trioxide aggregate. The compression and tensile strength of the composed cements increased (2-4 times the initial values) with time for up to 21 days in an aqueous medium, the degree to which largely depended on the composition. The cell viability test with rat mesenchymal stem cells revealed no toxicity for any composition except C3A, which contained aluminum. To confirm the in vivo biological response, cement was retro-filled into an extracted rat tooth and the complex was re-implanted. Four weeks post-operation, histological assessments revealed that C3A caused significant tissue toxicity, while good tissue compatibility was observed with the other compositions. Taken together, these results reveal that of the three major constituents of mineral trioxide aggregate, C3A generated significant toxicity in vitro and in vivo, although it accelerated setting time. This study highlights the need for careful consideration with regard to the composition of mineral trioxide aggregate, and if possible (when other properties are satisfactory), the C3A component should be avoided, which can be achieved by the mixture of individual components.