Novel evaluation method of dentin repair by direct pulp capping using high-resolution micro-computed tomography

An animal study on the effectiveness of platelet-rich plasma as a direct pulp capping agent

Direct pulp capping (DPC) is a conservative approach for preserving tooth vitality without requiring more invasive procedures by enhancing pulp healing and mineralized tissue barrier formation. We investigated the effectiveness of Platelet Rich Plasma (PRP) vs. Mineral Trioxide Aggregate (MTA) as a DPC agent. Forty-two teeth from three mongrel dogs were divided into two equal groups. After three months, the animals were sacrificed to evaluate teeth radiographically using cone-beam computerized tomography, histopathologically, and real-time PCR for dentin sialophosphoprotein (DSPP), matrix extracellular phosphoglycoprotein (MEPE), and nestin (NES) mRNA expression. Radiographically, hard tissue formation was evident in both groups without significant differences (p = 0.440). Histopathologic findings confirmed the dentin bridge formation in both groups; however, such mineralized tissues were homogenous without cellular inclusions in the PRP group, while was osteodentin type in the MTA group. There was no significant difference in dentin bridge thickness between the PRP-capped and MTA-capped teeth (p = 0.732). The PRP group had significantly higher DSPP, MEPE, and NES mRNA gene expression than the MTA group (p < 0.05). In conclusion, PRP enables mineralized tissue formation following DPC similar to MTA, and could generate better cellular dentinogenic responses and restore dentin with homogenous architecture than MTA, making PRP a promising alternative DPC agent.

Dual-Fuel Propelled Nanomotors with Two-Stage Permeation for Deep Bacterial Infection in the Treatment of Pulpitis

Bacterial infection-induced inflammatory response could cause irreversible death of pulp tissue in the absence of timely and effective therapy. Given that, the narrow structure of root canal limits the therapeutic effects of passive diffusion-drugs, considerable attention has been drawn to the development of nanomotors, which have high tissue penetration abilities but generally face the problem of insufficient fuel concentration. To address this drawback, dual-fuel propelled nanomotors (DPNMs) by encapsulating L-arginine (L-Arg), calcium peroxide (CaO2 ) in metal-organic framework is developed. Under pathological environment, L-Arg could release nitric oxide (NO) by reacting with reactive oxygen species (ROS) to provide the driving force for movement. Remarkably, the depleted ROS could be supplemented through the reaction between CaO2 with acids abundant in the inflammatory microenvironment. Owing to high diffusivity, NO achieves further tissue penetration based on the first-stage propulsion of nanomotors, thereby removing deep-seated bacterial infection. Results indicate that the nanomotors effectively eliminate bacterial infection based on antibacterial activity of NO, thereby blocking inflammatory response and oxidative damage, forming reparative dentine layer to avoid further exposure and infection. Thus, this work provides a propagable strategy to overcome fuel shortage and facilitates the therapy of deep lesions.

Microstructural Evaluation of the Mineralized Apical Barrier Induced by a Calcium Hydroxide Paste Containing Iodoform: A Case Report

INTRODUCTION

A 65-year-old man had nonsurgical retreatment using an iodoform and calcium hydroxide paste in a maxillary left canine with persistent apical periodontitis. An apical mineralized barrier (AMB) was observed 3-months postoperatively. Unfortunately, the tooth was extracted due to a cementum tear. This provided an opportunity to analyze the AMB histologically, as there is a lack of previous reports on its microstructure.

METHODS

After extraction and removal of the granulation tissue from the root surface, the canine was processed, and observed using micro-computed tomography (μCT) and light microscopy. Thereafter, the specimen was resin-embedded specimen was evaluated by scanning electron microscopy, micro-X-ray fluorescence spectroscopy and Raman spectroscopy to understand the mechanism and nature of the AMB formation during apical healing.

RESULTS

Nonsurgical retreatment was clinically successful based on the absence of clinical symptoms of apical periodontitis and the radiographic presence of an AMB. The AMB was opaque and could be readily differentiated from dentin under a light microscope. Micro-computed tomography analysis revealed that the AMB had the same mineral density as dentin. Scanning electron microscopy revealed that the AMB had two distinct layers based on the size of the calcified particles. Elemental mapping using micro-X-ray fluorescence spectroscopy showed that the localization of calcium and phosphorus differed between AMB and other areas of biomineralization. Raman spectral mapping revealed that the surface layer of the AMB consisted of collagen, calcium carbonate, and hydroxyapatite.

CONCLUSIONS

This study explored new analytical methods for elucidating the apical wound-healing process and the nature of the mineralized repair. The findings provided detailed information on the AMB highlighting a bilaminar structure with high calcium components higher on the inside and a brightness similar to cementum not dentin and the presence of hydroxyapatite.

GelMA/TCP nanocomposite scaffold for vital pulp therapy

Pulp capping is a necessary procedure for preserving the vitality and health of the dental pulp, playing a crucial role in preventing the need for root canal treatment or tooth extraction. Here, we developed an electrospun gelatin methacryloyl (GelMA) fibrous scaffold incorporating beta-tricalcium phosphate (TCP) particles for pulp capping. A comprehensive morphological, physical-chemical, and mechanical characterization of the engineered fibrous scaffolds was performed. In vitro bioactivity, cell compatibility, and odontogenic differentiation potential of the scaffolds in dental pulp stem cells (DPSCs) were also evaluated. A pre-clinical in vivo model was used to determine the therapeutic role of the GelMA/TCP scaffolds in promoting hard tissue formation. Morphological, chemical, and thermal analyses confirmed effective TCP incorporation in the GelMA nanofibers. The GelMA+20%TCP nanofibrous scaffold exhibited bead-free morphology and suitable mechanical and degradation properties. In vitro, GelMA+20%TCP scaffolds supported apatite-like formation, improved cell spreading, and increased deposition of mineralization nodules. Gene expression analysis revealed upregulation of ALPL, RUNX2, COL1A1, and DMP1 in the presence of TCP-laden scaffolds. In vivo, analyses showed mild inflammatory reaction upon scaffolds' contact while supporting mineralized tissue formation. Although the levels of Nestin and DMP1 proteins did not exceed those associated with the clinical reference treatment (i.e., mineral trioxide aggregate), the GelMA+20%TCP scaffold exhibited comparable levels, thus suggesting the emergence of differentiated odontoblast-like cells capable of dentin matrix secretion. Our innovative GelMA/TCP scaffold represents a simplified and efficient alternative to conventional pulp-capping biomaterials. STATEMENT OF SIGNIFICANCE: Vital pulp therapy (VPT) aims to preserve dental pulp vitality and avoid root canal treatment. Biomaterials that bolster mineralized tissue regeneration with ease of use are still lacking. We successfully engineered gelatin methacryloyl (GelMA) electrospun scaffolds incorporated with beta-tricalcium phosphate (TCP) for VPT. Notably, electrospun GelMA-based scaffolds containing 20% (w/v) of TCP exhibited favorable mechanical properties and degradation, cytocompatibility, and mineralization potential indicated by apatite-like structures in vitro and mineralized tissue deposition in vivo, although not surpassing those associated with the standard of care. Collectively, our innovative GelMA/TCP scaffold represents a simplified alternative to conventional pulp capping materials such as MTA and Biodentine™ since it is a ready-to-use biomaterial, requires no setting time, and is therapeutically effective.

Effect of Bioactive Glasses and Basic Fibroblast Growth Factor on Dental Pulp Cells

Ideal regeneration of hard tissue and dental pulp has been reported with the use of a combination of bioactive glass and basic fibroblast growth factor (bFGF). However, no previous study has investigated the molecular mechanisms underlying the processes induced by this combination in dental pulp cells. This study aimed to examine the cellular phenotype and transcriptional changes induced by the combination of bioactive glass solution (BG) and bFGF in dental pulp cells using phase-contrast microscopy, a cell counting kit-8 assay, alkaline phosphatase staining, and RNA sequence analysis. bFGF induced elongation of the cell process and increased the number of cells. Whereas BG did not increase ALP activity, it induced extracellular matrix-related genes in the dental pulp. In addition, the combination of BG and bFGF induces gliogenesis-related genes in the nervous system. This is to say, bFGF increased the viability of dental pulp cells, bioactive glass induced odontogenesis, and a dual stimulation with bioactive glass and bFGF induced the wound healing of the nerve system in the dental pulp. Taken together, bioactive glass and bFGF may be useful for the regeneration of the dentin-pulp complex.

Direct pulp capping procedures - Evidence and practice

The aim of direct pulp capping (DPC) is to promote pulp healing and mineralized tissue barrier formation by placing a dental biomaterial directly over the exposed pulp. Successful application of this approach avoids the need for further and more extensive treatment. In order to ensure a complete pulp healing with the placement of restorative materials, a mineralized tissue barrier must form to protect the pulp from microbial invasion. The formation of mineralized tissue barrier can only be induced when there is a significant reduction in pulp inflammation and infection. Consequently, promoting the healing of pulp inflammation may provide a favorable therapeutic opportunity to maintain the sustainability of DPC treatment. Mineralized tissue formation was observed as the favorable reaction of exposed pulp tissue against a variety of dental biomaterials utilized for DPC. This observation reveals an intrinsic capacity of pulp tissue for healing. Therefore, this review focuses on the DPC and its healing procedure as well as the materials used for DPC treatment and their mechanisms of action to promote pulpal healing. In addition, the factors that can affect the healing process of DPC, clinical considerations and future perspective has been described.

Clinical application of calcium silicate-based bioceramics in endodontics

Pulp treatment is extremely common in endodontics, with the main purpose of eliminating clinical symptoms and preserving tooth physiological function. However, the effect of dental pulp treatment is closely related to the methods and materials used in the process of treatment. Plenty of studies about calcium silicate-based bioceramics which are widely applied in various endodontic operations have been reported because of their significant biocompatibility and bioactivity. Although most of these materials have superior physical and chemical properties, the differences between them can also have an impact on the success rate of different clinical practices. Therefore, this review is focused on the applications of several common calcium silicate-based bioceramics, including Mineral trioxide aggregate (MTA), Biodentine, Bioaggregate, iRoot BP Plus in usual endodontic treatment, such as dental pulp capping, root perforation repair, regenerative endodontic procedures (REPs), apexification, root-end filling and root canal treatment (RCT). Besides, the efficacy of these bioceramics mentioned above in human trials is also compared, which aims to provide clinical guidance for their clinical application in endodontics.

Poly(Aspartic Acid) Promotes Odontoblast-like Cell Differentiation in Rat Molars with Exposed Pulp

In recent years, alternative pulpal therapies targeting dentinogenesis signaling pathways using different peptides have been investigated. The aim of this study was to verify the effectiveness of poly(aspartic acid), pAsp, in dentin regeneration using an animal model.

METHODS

Mechanical pulp exposure was performed in the upper molars of 56 Wistar rats, randomly divided as follows (n = 14): control (no treatment); MTA group-pulp capping with mineral trioxide aggregate (MTA Angelus); pAsp group-application of 20 μL of pAsp solution (25 mg·mL-1); MTA+pAsp group-application of MTA mixed with pAsp (5:1 by mass). Animals were euthanized after 7 or 21 days. Histological sections were submitted to hematoxylin-eosin and Brown and Brenn staining and immunohistochemical analysis for osteopontin (OPN) and dentin matrix protein 1 (DMP 1).

RESULTS

At 7 days, an acute inflammatory infiltrate and the presence of disorganized mineralized tissue were observed in all groups. At 21 days, the quality and thickness of the reparative dentin in treated groups were superior to the control, and bacterial contamination was observed in two MTA-pAsp specimens. While all treated groups showed intense immunostaining for OPN at 21 days, only the pAsp group expressed DMP 1, indicating the presence of fully differentiated odontoblast-like cells.

CONCLUSION

Poly(aspartic) acid promoted dentin regeneration in rat molars in the absence of an additional calcium source and may be an alternative to MTA as a pulp-capping agent.

A novel analysis of the formation and resorption changes in dental hard tissue using longitudinal in vivo micro computed tomography

This study was to investigate the new analysis manner of dental hard tissue change using in vivo micro-computed tomography (CT) in rat. Scanning, registration, analyzing, and presenting method to track longitudinal in vivo micro-CT data on dental hard tissues were validated in murine models: formative, dentin thickness after direct pulp capping with mineral trioxide aggregate; resorptive, development of apical bone rarefaction in apical periodontitis model. Serial in vivo micro-CT scans were analyzed through rigid-registration, active-contouring, deformable-registration, and motion vector-based quantitative analyses. The rate and direction of hard tissue formation after direct pulp capping was datafied by tracing coordinate shift of fiducial points on pulp chamber outline in formative model. The development of apical periodontitis could be monitored with voxel counts, and quantitatively analyzed in terms of lesion size, bone loss, and mineral density in resorptive model. This study supports the application of longitudinal in vivo micro-CT for resorptive- and formative-phase specific monitoring of dental hard tissues.

Development of Rat Caries-Induced Pulpitis Model for Vital Pulp Therapy

Rodent animal models for vital pulp therapy are commonly used in dental research because their tooth anatomy and cellular processes are similar to the anatomy and processes in humans. However, most studies have been conducted using uninfected sound teeth, which makes it difficult to adequately assess the inflammatory shift after vital pulp therapy. In the present study, we aimed to establish a caries-induced pulpitis model based on the conventional rat caries model and then evaluate inflammatory changes during the wound-healing process after pulp capping in a model of reversible pulpitis induced by carious infection. To establish the caries-induced pulpitis model, the pulpal inflammatory status was investigated at different stages of caries progression by immunostaining targeted to specific inflammatory biomarkers. Immunohistochemical staining revealed that both Toll-like receptor 2 and proliferating cell nuclear antigen were expressed in moderate and severe caries-stimulated pulp, indicating that an immune reaction occurred at both stages of caries progression. M2 macrophages were predominant in moderate caries-stimulated pulp, whereas M1 macrophages were predominant in the severe caries-stimulated pulp. Pulp capping in teeth with moderate caries (i.e., teeth with reversible pulpitis) led to complete tertiary dentin formation within 28 d after treatment. Impaired wound healing was observed in teeth with severe caries (i.e., teeth with irreversible pulpitis). During the wound-healing process in reversible pulpitis after pulp capping, M2 macrophages were predominant at all time points; their proliferative capacity was upregulated in the early stage of wound healing compared with healthy pulp. In conclusion, we successfully established a caries-induced pulpitis model for studies of vital pulp therapy. M2 macrophages have an important role in the early stages of the wound-healing process in reversible pulpitis.

Novel Functional Peptide for Next-Generation Vital Pulp Therapy

Although vital pulp therapy should be performed by promoting the wound-healing capacity of dental pulp, existing pulp-capping materials were not developed with a focus on the pulpal repair process. In previous investigations of wound healing in dental pulp, we found that organic dentin matrix components (DMCs) were degraded by matrix metalloproteinase-20, and DMC degradation products containing protein S100A7 (S100A7) and protein S100A8 (S100A8) promoted the pulpal wound-healing process. However, the direct use of recombinant proteins as pulp-capping materials may cause clinical problems or lead to high medical costs. Thus, we hypothesized that functional peptides derived from recombinant proteins could solve the problems associated with direct use of such proteins. In this study, we identified functional peptides derived from the protein S100 family and investigated their effects on dental pulp tissue. We first performed amino acid sequence alignments of protein S100 family members from several mammalian sources, then identified candidate peptides. Next, we used a peptide array method that involved human dental pulp stem cells (hDPSCs) to evaluate the mineralization-inducing ability of each peptide. Our results supported the selection of 4 candidate functional peptides derived from proteins S100A8 and S100A9. Direct pulp-capping experiments in a rat model demonstrated that 1 S100A8-derived peptide induced greater tertiary dentin formation compared with the other peptides. To investigate the mechanism underlying this induction effect, we performed liquid chromatography-tandem mass spectrometry analysis using hDPSCs and the S100A8-derived peptide; the results suggested that this peptide promotes tertiary dentin formation by inhibiting inflammatory responses. In addition, this peptide was located in a hairpin region on the surface of S100A8 and could function by direct interaction with other molecules. In summary, this study demonstrated that a S100A8-derived functional peptide promoted wound healing in dental pulp; our findings provide insights for the development of next-generation biological vital pulp therapies.

The Influence of New Bioactive Materials on Pulp–Dentin Complex Regeneration in the Assessment of Cone Bone Computed Tomography (CBCT) and Computed Micro-Tomography (Micro-CT) from a Present and Future Perspective—A Systematic Review

The present paper is the first article providing a systematic literature review on the visualization of tertiary dentin influenced by modern bioactive materials in CBCT and micro-CT. Six database searches of studies on tertiary dentin visualization using CBCT produced 622 records in total, and the search of the studies on tertiary dentin using micro-CT produced 502 records in total. The results were thoroughly selected considering the inclusion criteria, and five research papers using CBCT and nine research papers using micro-CT for visualization of tertiary dentin were eventually qualified for the analysis. All the non-randomized and randomized studies presented good and high levels of quality evidence, respectively. Among the bioactive materials used, the most frequently analysed were: MTA, Biodentine dentin matrix hydrogel, Pro Root MTA, and EndoSequence root repair material. The highest thickness of the tertiary dentin was achieved after the use of MTA material in both imaging techniques. The remaining parameters had different results, taking into account the CBCT and micro-CT analysis. The possibilities of the qualitative and quantitative assessment of the particular parameters of tertiary dentin using CBCT and micro-CT techniques were presented and analysed. CBCT and micro-CT analyses can be useful in the assessment of tertiary dentin formed beneath the bioactive material applied during vital pulp treatment. The research argues that the presented results differ depending on the material applied to the pulp, the study duration (4–6 weeks), difference in teeth, species (rats, human), as well as the applied technique and differences in computer software used for the analysis.

Adoption of Biomedical Ceramic iRoot BP in the Treatment of Localized Pulpitis in Children

To explore the clinical efficacy of biomedical ceramic iRoot BP in the treatment of localized acute pulpitis in children, and the effect of iRoot BP on proliferation and osteogenic differentiation of human dental pulp stem cells (hDPSCs), 72 localized acute pulpitis children admitted to our hospital from September 2018 to September 2019 were selected and divided into group A (treated with MTA pulp capping material) and group B (treated with iRoot BP material), and the clinical effect, pain degree, and adverse reactions (ADR) rate were compared. The effects of iRoot BP on hDPSCs proliferation and osteogenic differentiation were analyzed; the proliferative activity of cells in iRoot BP group, MTA group, and control group (C group) were measured by cholecystokinin-8 (CCK-8) assay, the ability of cell mineralized nodular formation was observed via alizarin red staining; and quantitative reverse transcription PCR (qRT-PCR) andWestern blot were adopted to determine the expression of osteogenic related genes of hDPSCs and key proteins of mitogen-activated protein kinase (MAPK) signaling pathway. After 1 week of treatment, the clinical efficacy of group B was more favorable in contrast with group A (P < 0.05); the pain of children in group B was notably better in contrast with group A, and incidence of ADR was notably lower in contrast with group A (P < 0.05). 5.0 mg/mL, 10.0 mg/mL, and 30 mg/mL iRoot BP or MTA could improve cell proliferation activity (P < 0.01); the effect of iRoot BP on proliferation of hDPSCs was greater in contrast with MTA (P < 0.05); and the integral optical density (IOD) value of iRoot BP group was notably higher in contrast with MTA group (P < 0.01). The mRNA expression levels of collagen-I (COL-I), bone sialoprotein (BSP), and osteocalcin (OC) in MTA group and iRoot BP group were notably higher in contrast with C group (P < 0.01); the COL-I mRNA expression level of iRoot BP group was notably higher in contrast with MTA group (P < 0.01); the mRNA expression level of BSP in MTA group was notably higher in contrast with iRoot BP group (P < 0.01); the relative protein expression levels of phosphorylated ERK (p-ERK) and phospho-Jun N-terminal kinase (p-JNK) in MTA group and iRoot BP group were notably higher in contrast with C group (P < 0.01); and the relative expression level of p-ERK protein in iRoot BP group was higher in contrast with MTA group (P < 0.05). These results indicated that the clinical efficacy of biomedical ceramic iRoot BP was better than MTA in the preservation of live pulpitis in children, and the patients treated with iRoot BP had better pain recovery effect and lower risk of ADR. The effect of iRoot BP on the proliferation and mineralization of hDPSCs was better than that of MTA, and it may promote the osteogenic differentiation of hDPSCs by activating MAPK signaling pathway and regulating gene expression of COL-I, BSP, and OC.

Biological properties of lithium-containing surface pre-reacted glass fillers as direct pulp-capping cements

OBJECTIVE

Surface pre-reacted glass fillers (S-PRG) can release different types of ions and in our previous study, we modified these fillers with lithium chloride (S-PRG/Li-100 mM) to induce reparative dentin formation by activating the Wnt/β-catenin signaling pathway. Here, we assessed the biological performance of S-PRG/Li-100 mM and compared it with that of mineral trioxide aggregate (MTA) and S-PRG without additives.

METHODS

In vivo studies were conducted on male Wistar rats using Masson's trichrome staining in pulp-capped molars. The test materials were implanted subcutaneously to evaluate their capacity for vascularization and biocompatibility. The ability of the test materials to form apatite was tested by immersing them in simulated body fluid. Rhodamine-B staining was conducted to assess their sealing ability in bovine teeth, while their antibacterial activity was evaluated against Streptococcus mutans and Lactobacillus casei in terms of colony-forming units and by live/dead staining.

RESULTS

Masson's trichrome staining and tissue-implantation tests confirmed the biocompatibility of S-PRG/Li-100 mM and it was similar to that of MTA and S-PRG; inflammation regression was observed 14 days after operation in the subcutaneous tissues. S-PRG/Li-100 mM promoted the formation of apatite on its surface. Both the S-PRG groups showed higher sealing capability and bactericidal/bacteriostatic activity against oral bacterial biofilms than MTA.

SIGNIFICANCE

Lithium-containing surface pre-reacted glass cements exhibit better antibacterial and sealing capabilities than MTA, suggesting their potential as high-performance direct pulp-capping materials.

Silicate bioceramics elicit proliferation and odonto-genic differentiation of human dental pulp cells

This study aimed to investigate the effects of silicates on the proliferation and odontogenic differentiation of human dental pulp cells (hDPCs) in vitro. HDPCs were cultured in the presence of calcium silicate (CS) extracts, while calcium hydroxide (CH) extracts and culture medium without CH or CS were used as the control groups. The calcium and phosphorus ion concentrations in the CS were similar to those in the control groups, but the concentration of silicon ions in the CS extracts was higher than that in the control groups. HDPCs cultured with CS and CH extracts at dilution of 1/128 proliferated significantly more than those cultured with the control treatments. CS extracts promoted cell migration, enhanced the expression of odontogenic marker genes and conspicuously increased odontogenesis-related protein production and the release of cytokines, suggesting that CS bioactive ceramics possess excellent biocompatibility and bioactivity and have the potential for application as pulp-capping agents.

Premixed bioceramics: A novel pulp capping agent

The main aim of restorative dentistry is to protect the vitality of the Pulp tissue. The pin point carious expoure and iatrogenic errors warrant the need for various pulp capping procedures like Indirect Pulp Capping and Direct Pulp Capping. Pulp Capping is dressing of the dental pulp exposed due to mechanical procedure, carious lesion or traumatic injury to preserve its vitality and function. There has been constant evolution and research on materials used to cap the Pulp tissue. The different kind of chemical and biological materials has been used with varying degree of success. The prognosis based on the pulp capping material has dramatically improved with the introduction of bioactive cement. Though MTA and biodentine have shown a high success rate, their properties can be adversely affected with error in powder/liquid ratio and may present with difficulty in the handling characteristic. Premixed bioceramics have been introduced in the market and present with desirable properties as a pulp capping agent. Owing to good handling characteristics, biocompatibility, odontogenic property, and antibacterial action it is a potent pulp capping agent for clinical application. This review is aimed to discuss the introduction of premixed bioceramics, forms of premixed bioceramics available, and its physical, chemical, and biocompatible properties.

In vivo Biocompatibility and Bioactivity of Calcium Silicate-Based Bioceramics in Endodontics

Endodontic therapy aims to preserve or repair the activity and function of pulp and periapical tissues. Due to their excellent biological features, a substantial number of calcium silicate-based bioceramics have been introduced into endodontics and simultaneously increased the success rate of endodontic treatment. The present manuscript describes the in vivo biocompatibility and bioactivity of four types of calcium silicate-based bioceramics in endodontics.

Performance of a Biodegradable Composite with Hydroxyapatite as a Scaffold in Pulp Tissue Repair

Vital pulp therapy is an important endodontic treatment. Strategies using growth factors and biological molecules are effective in developing pulp capping materials based on wound healing by the dentin-pulp complex. Our group developed biodegradable viscoelastic polymer materials for tissue-engineered medical devices. The polymer contents help overcome the poor fracture toughness of hydroxyapatite (HAp)-facilitated osteogenic differentiation of pulp cells. However, the composition of this novel polymer remained unclear. This study evaluated a novel polymer composite, P(CL-co-DLLA) and HAp, as a direct pulp capping carrier for biological molecules. The biocompatibility of the novel polymer composite was evaluated by determining the cytotoxicity and proliferation of human dental stem cells in vitro. The novel polymer composite with BMP-2, which reportedly induced tertiary dentin, was tested as a direct pulp capping material in a rat model. Cytotoxicity and proliferation assays revealed that the biocompatibility of the novel polymer composite was similar to that of the control. The novel polymer composite with BMP-2-induced tertiary dentin, similar to hydraulic calcium-silicate cement, in the direct pulp capping model. The BMP-2 composite upregulated wound healing-related gene expression compared to the novel polymer composite alone. Therefore, we suggest that novel polymer composites could be effective carriers for pulp capping.

Comparison of iRoot BP Plus and Calcium Hydroxide as Pulpotomy Materials in Permanent Incisors with Complicated Crown Fractures: A Retrospective Study

INTRODUCTION

Calcium hydroxide has been used as a traditional pulpotomy agent for a long time but has some disadvantages. iRoot BP Plus (Innovative Bioceramix Inc, Vancouver, Canada) is a newly developed, ready-to-use calcium silicate-based bioactive ceramic with excellent bioactivity and sealing ability. However, whether iRoot BP Plus shows superiority over calcium hydroxide as a pulpotomy material on permanent incisors with complicated crown fractures remains unknown.

METHODS

This research included 205 permanent incisors with complicated crown fractures. These teeth were treated with pulpotomy and divided into 2 groups according to the pulpotomy material (105 treated with iRoot BP Plus and 100 with calcium hydroxide). Clinical and radiographic information was collected during the 12- to 24-month follow-up period. The formation of reparative dentin bridges and pulp canal obliteration were analyzed using radiographs in both groups.

RESULTS

The success rates for recall in the average follow-up period of 17.5 ± 4.4 months (12-24 months) after pulpotomy treatment were significantly different between the 2 groups, with 99% for the iRoot BP Plus group and 93% for the calcium hydroxide group. Reparative dentin bridges were observed in 92.4% of the iRoot BP Plus group and 90% of the calcium hydroxide group, but the difference was not significant. Pulp canal obliteration was observed in 2 teeth (2%) in each group.

CONCLUSIONS

The success rates obtained in our study indicate that iRoot BP Plus as a pulpotomy agent can be a suitable alternative to calcium hydroxide to manage complicated crown fractures.

Comparison between iRoot BP Plus (EndoSequence Root Repair Material) and Mineral Trioxide Aggregate as Pulp-capping Agents: A Systematic Review

INTRODUCTION

iRoot BP Plus, also known as EndoSequence root repair material (EERM) is a premixed bioceramic thick/putty. According to its instruction manual, iRoot BP Plus is composed of tricalcium silicate, zirconium oxide, tantalum pentoxide, dicalcium silicate, calcium sulfate, calcium phosphate monobasic, and filler agents. This systematic review was carried out to evaluate and present the iRoot BP Plus material as a pulp-capping agent.

MATERIALS AND METHODS

A systematic search for articles with the scope of the selection criteria undergoing for data extraction was conducted through electronic databases. Studies on evaluation of the cytotoxicity, bioactivity, and dentinal bridge formation of iRoot BP, iRoot BP Plus, ERRM putty, or ERRM paste (ERRM) on variant human cells were selected for in vitro models, and dentinal bridge formation on human and animals teeth for in vivo models were selected.

RESULTS

A total of 22 articles were discussed in the review, 14 in vitro studies, five in vivo studies, and three articles with both studies. Methyl thiazol tetrazolium was the most used method for evaluating cytotoxicity. As for dentinal bridge formation, histological assessment and micro-Computed tomography were used. Human dental pulp cells (hDPCs) were the most investigated for in vitro models and rats for in vivo models. Except for one study, all studies involved in this review were primarily examining the material and comparing it to different types of mineral trioxide aggregate.

CONCLUSION

iRoot BP, iRoot BP Plus, and ERRM are biocompatible materials that enhance hDPCs and other variant human cells proliferation, migration, attachment adhesion, mineralization, and dentinal bridge formation.

Lithium-containing surface pre-reacted glass fillers enhance hDPSC functions and induce reparative dentin formation in a rat pulp capping model through activation of Wnt/β-catenin signaling

Surface pre-reacted glass (S-PRG) fillers are new bioactive molecules used in dental clinic work to fill tooth defects. These fillers release various types of ions (Al⁺³, BO^-3, Na⁺, SiO₃^-2, Sr⁺² and F^-) and exhibit high biocompatibility, antibacterial capability, reduced plaque accumulation, and enhanced osteoblast differentiation. We previously showed that cement of S-PRG fillers could induce tertiary dentin formation in rat models. Previous work also showed that lithium ions can activate the Wnt/β-catenin signaling pathway in vitro and induce dentin formation in pulpotomized teeth in vivo. In the current study, we sought to enhance the effect of S-PRG cement by incorporating LiCl. We show that treatment of human dental pulp stem cells with eluates from S-PRG/LiCl combination cements leads to an upregulation in cell migration, differentiation, and mineralization in vitro. In pulp-capping animal trials, we found that S-PRG/LiCl cements could induce tertiary dentin formation 28-days post-capping. At 7 days post-capping, we identified both β-catenin and Axin2 expression using immunofluorescence, indicative of Wnt/β-catenin signaling activity. In conclusion, S-PRG/LiCl cement is highly effective in promoting human dental pulp stem cells profiles and in enhancing reparative dentin formation in rat teeth through activation of the Wnt/β-catenin canonical signaling pathway. STATEMENT OF SIGNIFICANCE: This is the first study to assess the behavior of S-PRG fillers containing lithium ions on human dental pulp stem cells. We show that this new combination cement promotes positive cell responses by activating the endogenous Wnt/β-catenin signaling pathway in the pulp. The Wnt/β-catenin canonical signaling pathway is involved in many developmental and wound healing processes. The released lithium ions from the S-PRG cement were systematically detected <0.01 mmol/L in our rat model. But it was efficient to induce tertiary dentin formation at the defect site. Since this novel bioactive cement is potentially a promising material for clinical pulp regenerative therapy, future human clinical trials will be needed.

Surface Pre-Reacted Glass Filler Contributes to Tertiary Dentin Formation through a Mechanism Different Than That of Hydraulic Calcium-Silicate Cement

The induction of tissue mineralization and the mechanism by which surface pre-reacted glass-ionomer (S-PRG) cement influences pulpal healing remain unclear. We evaluated S-PRG cement-induced tertiary dentin formation in vivo, and its effect on the pulp cell healing process in vitro. Induced tertiary dentin formation was evaluated with micro-computed tomography (μCT) and scanning electron microscopy (SEM). The distribution of elements from the S-PRG cement in pulpal tissue was confirmed by micro-X-ray fluorescence (μXRF). The effects of S-PRG cement on cytotoxicity, proliferation, formation of mineralized nodules, and gene expression in human dental pulp stem cells (hDPSCs) were assessed in vitro. μCT and SEM revealed that S-PRG induced tertiary dentin formation with similar characteristics to that induced by hydraulic calcium-silicate cement (ProRoot mineral trioxide aggregate (MTA)). μXRF showed Sr and Si ion transfer into pulpal tissue from S-PRG cement. Notably, S-PRG cement and MTA showed similar biocompatibility. A co-culture of hDPSCs and S-PRG discs promoted mineralized nodule formation on surrounding cells. Additionally, S-PRG cement regulated the expression of genes related to osteo/dentinogenic differentiation. MTA and S-PRG regulated gene expression in hDPSCs, but the patterns of regulation differed. S-PRG cement upregulated CXCL-12 and TGF-β1 gene expression. These findings showed that S-PRG and MTA exhibit similar effects on dental pulp through different mechanisms.

Pulpal repair after direct pulp capping with new bioceramic materials: A comparative histological study

Aim

To histopathologically evaluate the pulpal healing after direct pulp capping with TotalFill and compared it with Neo MTA Plus in human tooth cultures.

Methods

Forty sound human premolars freshly extracted for orthodontic reasons were randomly assigned to two experimental groups; group I: TotalFill and group II: Neo MTA Plus. Standardized Class V cavities were prepared on the buccal surface of each tooth where the pulp exposure was performed with a dental explorer. The pulp-exposed teeth were immediately capped with one of the tested materials. The prepared cavities were then finally restored with glass-ionomer cement. Teeth were cultured for three weeks and three months. Then, the cultured teeth were demineralized, sectioned and stained for histopathological evaluation. Data collected and statistically analyzed by using Fisher's exact test. The significance level was set at P ≤ 0.05.

Results

Histopathological analysis showed complete dentin bridge formation and an absence of inflammatory pulp response. Statistical analysis showed no significant differences between the TotalFill and Neo MTA Plus groups during the observation periods. However, a significantly higher thickness of the dentin bridge was found in the group of teeth treated with TotalFill at three months.

Conclusions

TotalFill produced similar favorable pulp healing and repair, and were comparable to Neo MTA Plus. Furthermore, TotalFill can form a thicker dentin bridge compared with Neo MTA Plus.

Effect of tissue inhibitor of metalloprotease 1 on human pulp cells in vitro and rat pulp tissue in vivo

AIM

To evaluate the dentinogenetic effects of tissue inhibitor of metalloprotease (TIMP1) on human pulp cells in vitro and rat pulp tissue in vivo.

METHODOLOGY

The effect of TIMP1 on pulp cell functions related to hard tissue formation as part of the wound healing process (i.e. biocompatibility, proliferation, differentiation and mineralized nodule formation) was evaluated in vitro and using a direct pulp capping experimental animal model in vivo. The effects of different-sized cavity preparations on hard tissue formation induced by ProRoot MTA at 2 weeks were evaluated using micro-computed tomography (micro-CT). Tertiary dentine formation quality and quantity after pulp capping using TIMP1, ProRoot MTA and phosphate-buffered saline (PBS) was also evaluated after 4 weeks using micro-CT in term of dentine volume (DV), dentine mineral density (DVD) and histological analysis. The data were evaluated by Student's t-test, one-way ANOVA with Tukey's post hoc test, the Kruskal-Wallis test or the Steel-Dwass test. P values < 0.05 were considered statistically significant.

RESULTS

TIMP1 significantly stimulated dental pulp stem cell proliferation, differentiation, and mineralization and was more biocompatible compared with the PBS control (P < 0.05). In the pulp capping model, the amount of tertiary dentine that formed was directly proportional to the size of the pulp exposure; greater amounts of tertiary dentine were observed in pulps with larger exposures after 2 weeks. 4-week samples of TIMP1 and ProRoot MTA had similar characteristics, but both sample significantly induced tertiary dentine formation beneath the cavity compared with PBS (P <  0.05) under standardized cavity preparations.

CONCLUSIONS

TIMP1 has an important role in pulpal wound healing, which makes it a potential biological pulp capping material and candidate molecule for regenerative endodontic therapy.