Efficacy of a thermally treated single file compared with rotary systems in endodontic retreatment of curved canals: a micro-CT study

ProTaper universal retreatment retreatment potential in oval-shaped canals filled with different obturation techniques-A micro-computed tomography study

Aim

The objective of this in vitro micro-computed tomography investigation is to assess the efficacy of the ProTaper Universal Retreatment System in retreating oval-shaped root canals filled with three obturation procedures.

Materials and Methods

Thirty-six lower incisors with a single oval root canal were prepared using XP-Endo Shaper up to size 30/0.04, and allocated into three equal groups based on the filling technique: Group 1: Warm vertical condensation technique; Group 2: GuttaCore obturators; Group 3: Cold lateral condensation technique. All samples were further retreated using the ProTaper Universal Retreatment system. Micro-CT analysis was performed before and after the retreatment procedure. Statistical analysis was performed with a significance level of 0.05. Data analysis was conducted using the Kolmogorov-Smirnov and Kruskal-Wallis H tests.

Results

The best performance of the files was achieved when the removal of the filling in the entire canal was considered. However, this outcome was not statistically significant when compared with the other observed root canal levels. The retreatment procedure could not ensure thorough cleanliness of the canal walls from filling remnants, regardless of the obturation technique and observational level.

Conclusions

The ProTaper Universal Retreatment system used for the removal of gutta-percha and sealer in oval-shaped root canals demonstrated equal effectiveness, regardless of the obturation technique used.

In vitro evaluation of filling material removal and apical debris extrusion after retreatment using Reciproc blue, Hyflex EDM and ProTaper retreatment files

OBJECTIVES

To evaluate the amount of remaining filing material and apical debris extrusion after retreatment using Reciproc Blue, Hyflex EDM and ProTaper Retreatment Files.

MATERIALS AND METHODS

Thirty-six extracted permanent mandibular first molars with moderately curved mesial roots were selected. Mesiobuccal canals were prepared using the ProTaper Next system up to size X2 and filled using gutta-percha and Adseal sealer via cold lateral compaction. Teeth were randomly divided into three equal groups (n = 12): Group 1: Reciproc Blue (RB)(VDW, Germany), Group 2: Hyflex EDM (HEDM)(Coltene/Whaledent, Switzerland), Group 3: ProTaper Universal Retreatment file system + ProTaper Next file system (PTUR + PTN)( Dentsply Maillefer, Switzerland). Eppendorf tubes were used to collect the apically extruded debris. Cone-beam computed tomographic scans were taken prior to and after retreatment and the volume of remaining filling material was assessed at the coronal, middle and apical levels. Statistical analysis was performed using the Kruskal-Wallis test, Friedman's test and Wilcoxon Sign Rank test. Significance level was set at p value 0.05.

RESULTS

There were no statistically significant differences among the three groups in the reduction of the volume of the filling material or in the amount of apically extruded debris.

CONCLUSION

All the tested filing systems showed similar efficacy in removing the filling material, however, none of them could achieve its complete removal. Apical extrusion of debris occurred with all the systems used with no significant difference between the three groups.

Efficiency and complications in root canal retreatment using nickel titanium rotary file with continuous rotation, reciprocating, or adaptive motion in curved root canals: a laboratory investigation

BACKGROUND

It is currently unknown whether rotary file motion affects the best outcome of root canal retreatment. This experimental study compared the efficacy, efficiency, and complications of single-use NiTi rotary files using continuous rotation, reciprocating, and adaptive motions in root canal filling removal in curved root canals. Reciproc blue R25 was used with reciprocating motion (RB), VDW.ROTATE retreatment files with continuous rotation (VR), and ProTaper NEXT X2 with continuous rotation (PTNc) or adaptive motion (PTNa).

METHODS

Forty mesial root canals of extracted mandibular first and second molars with an angle of curvature between 20°-40° and a radius of curvature between 5 and 10 mm were collected. The specimens were instrumented and obturated with gutta-percha and AH Plus sealer using the continuous wave of condensation technique. The specimens were randomly divided into 4 retreatment groups (n = 10), RB, VR, PTNc, and PTNa. The percentage of root canal filling removal in each group was analyzed using Micro-Computed Tomography (µCT). The motor running time, total time, root canal complication, and instrument complication were recorded and statistically analyzed (p-value < 0.05).

RESULTS

The pre-operative root canal curvature and root canal filling volume were comparable among groups. The percentage of root canal filling removal from the whole canal in the PTNc, RB, PTNa, and VR group was 98%, 96%, 95%, and 93%, respectively. A significant difference was observed between the PTNc and VR groups for the whole canal and the apical-third part. The motor running time and total time were significantly different between the groups. Instrument fracture was observed at 40% in the VR and 20% in the PTNa group, but none in the RB and PTNc groups.

CONCLUSIONS

The ProTaper NEXT X2 with continuous rotation and RB files can be used with high efficacy and efficiency in curved root canal retreatment. Continuous rotation is more efficacious and efficient than adaptive motion when using the NiTi rotary file. Single file retreatment can be used in small canals with high efficacy, cost-effectiveness, and less time consumption.

Micro-CT evaluation of the removal of root fillings using rotary and reciprocating systems supplemented by XP-Endo Finisher, the Self-Adjusting File, or Er,Cr:YSGG laser

Objectives

This study aimed to compare the effectiveness of a single-file reciprocating system (WaveOne Gold, WOG) and a multi-file rotary system (ProTaper Universal Retreatment, PTUR) in removing canal filling from severely curved canals and to evaluate the possible adjunctive effects of XP-Endo Finisher (XPF), the Self-Adjusting File (SAF), and an erbium, chromium: yttrium, scandium, gallium garnet (Er,Cr:YSGG) laser using micro-computed tomography (μCT).

Materials and Methods

Sixty-six curved mandibular molars were divided into 2 groups based on the retreatment technique and then into 3 based on the supplementary method. The residual filling volumes and root canals were evaluated with μCT before and after retreatment, and after the supplementary steps. The data were statistically analyzed with the t-test, Mann-Whitney U test, analysis of covariance, and factorial analysis of variance (p < 0.05).

Results

PTUR and WOG showed no significant difference in removing filling materials (p > 0.05). The supplementary techniques were significantly more effective than reciprocating or rotary systems only (p < 0.01). The supplementary steps showed no significant differences in canal filling removal effectiveness (p > 0.05), but XPF showed less dentin reduction than the SAF and Er,Cr:YSGG laser (p < 0.01).

Conclusions

The supplementary methods significantly decreased the volume of residual filling materials. XPF caused minimal changes in root canal volume and might be preferred for retreatment in curved root canals. Supplementary approaches after retreatment procedures may improve root canal cleanliness.

Comparative evaluation of efficacy of three single file retreatment systems for removal of gutta percha and assessment of root canal transportation - An In Vitro study

Background

In comparison to multiple file systems, recent advancements in single file retreatment systems had reduced the working time and ease of operation for clinicians.

Aim

To compare the efficacy of retreatment systems compared with hand instrumentation, by evaluating their removal efficacy, time required for retreatment and assessment of canal transportation.

Methods and Material

Forty premolars were instrumented using ProTaper Gold gold files. Post instrumentation, scan was taken, obturated using warm vertical compaction technique, and stored in artificial saliva for three months and randomly divided into four groups for retreatment. Hand instrumentation (Hi), Neoniti (Nn), Mtwo R (Mt), WaveOne Gold (Wg). Post retreatment, scan was taken. Teeth were sectioned longitudinally and photographed under the stereomicroscope. Retreatment time was recorded, and canal transportation was calculated.

Statistical Analysis

The results were analyzed using one-way analysis of variance (ANOVA) followed by Tukey's post hoc test at 95% confidence level.

Results

The retreatment time was significantly longer in the Hi group. Within the test groups, a significantly longer time has been taken by Wg (p < 0.05) compared to Mt and Nn. There was no difference in the canal transportation between the single file systems at 3 mm, 6 mm and 9 mm from the apex, there was statistically significant higher transportation for the Hi group at 9 mm from the apex (p < 0.05).

Conclusions

All techniques were effective in removal of filling material with minimal canal transportation. Wg system was shown to increased time compared to Nn and Mt systems. Hi group was slowest with maximum canal transportation at 9 mm from the apex.

Effectiveness and safety of rotary and reciprocating kinematics for retreatment of curved root canals: a systematic review of in vitro studies

Objectives

This systematic review (register-osf.io/wg7ba) compared the efficacy and safety of rotary and reciprocating kinematics in the removal of filling material from curved root canals.

Materials and Methods

Only in vitro studies evaluating both kinematics during retreatment were included. A systematic search (PubMed/MEDLINE, Scopus, and other databases, until January 2021), data extraction, and risk of bias analysis (Joanna Briggs Institute checklist) were performed. Efficacy in filling removal was the primary outcome.

Results

The search resulted in 2,795 studies, of which 15 were included. Efficacy was measured in terms of the remaining filling material and the time required for this. Nine studies evaluated filling material removal, of which 7 found no significant differences between rotary and reciprocating kinematics. Regarding the time for filling removal, 5 studies showed no difference between both kinematics, 2 studies showed faster results with rotary systems, and other 2 showed the opposite. No significant differences were found in apical transportation, centering ability, instrument failure, dentin removed and extruded debris. A low risk of bias was observed.

Conclusions

This review suggests that the choice of rotary or reciprocating kinematics does not influence the efficacy of filling removal from curved root canals. Further studies are needed to compare the kinematics safety in curved root canals.

Shaping Ability of Reciprocating and Rotary Systems After Root Canal Retreatment: a CBCT Study

The purpose of this in vitro study was to evaluate the shaping ability of reciprocating and continuous rotary systems after root canal retreatment. After preparation and root canal filling, mesial canals of 54 mandibular molars were distributed into 3 groups (n=18), according to the filling material removal and re-instrumentation protocols: WOG group - WaveOne Gold system; PTN group - ProTaper Next system; and PTU group - ProTaper Universal system. Cone-beam computed tomographic (CBCT) images acquisition of the mesial root canals was performed at different moments: (1) before instrumentation (unprepared root canals), (2) after preparation and filling, (3) after filling material removal and (4) re-instrumentation. The apical transportation (AT), centering ability (CA) and change in root canal diameter were assessed by CBCT analysis. The remaining filling material quantification was performed by radiographic examination. The statistical analyses were performed using the 3-way ANOVA, Tukey-Kramer, Kruskal-Wallis and Dunn multiple Comparison tests (p<0.05). The tested instruments did not show full CA (=1.0). PTN group had greater AT at the 5th mm in comparison with the WOG group (p<0.05). After re-instrumentation, WOG group had greater root canal diameter change at the 1st and 5th mm than PTN and PTU groups (p<0.05). There was no significant difference among groups when comparing the amount of remaining filling material after re-instrumentation (p>0.05). The tested systems provided minimal alteration in root canal morphology at the apical portion after root canal retreatment. However, WOG promoted greater change in root canal diameter.

A single-file endodontic treatment: A promising endodontic concept

nema

Comparison of the efficacy of three different supplementary cleaning protocols in root-filled teeth with a bioceramic sealer after retreatment-a micro-computed tomographic study

OBJECTIVE

The present study evaluated the efficacy of three different supplementary cleaning protocols on the removal of bioceramic-based root canal filling materials from oval-shaped canals.

MATERIALS AND METHODS

A total of 36 human mandibular premolars were instrumented and obturated with gutta-percha and iRoot SP using the single-cone technique. Retreatment was performed with ProTaper Universal retreatment files. The samples were randomly divided into the following supplementary cleaning protocols: conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI), and XP-endo Finisher R (XPR). The samples underwent micro-CT scanning to quantify the amount of residual filling materials after retreatment and after performing the cleaning protocols. The volume of filling material removal was analyzed by one-way analysis of variance and post hoc Bonferroni and Games-Howell tests (P < 0.05).

RESULTS

There were significant differences in the amount of root canal filling material removal in every comparison group (P < 0.05). The XPR removed significantly more residual filling materials (P < 0.01) followed by PUI and CSI (P < 0.05). Similar efficacy was found in the total root canal and all root thirds.

CONCLUSIONS

The additional use of XP-endo Finisher R and passive ultrasonic irrigation effectively removed the bioceramic-obturated root filling materials from the oval-shaped canals. However, none of the techniques completely removed the filling materials.

CLINICAL RELEVANCE

The XP-endo Finisher R and passive ultrasonic irrigation exhibited greater efficacy compared with syringe irrigation in the reduction of residual filling materials after retreatment in root-filled teeth with a bioceramic sealer.

Removal of filling material using rotating or reciprocating systems with or without solvent: microCT analysis

This study evaluated by the efficacy of rotary and reciprocating systems to remove filling material by micro-CT. Sixty human canines were instrumented up to F3 by ProTaper Universal system and filled with AH Plus/ gutta-percha. Specimens were submitted to 1,200 thermal cycles, scanned by microCT SkyScan 1176 and randomly distributed in groups according to the filling material removal protocol (n = 10): ProTaper Universal, ProTaper Universal/xylol, ProTaper Next, ProTaper Next/xylol, Reciproc and Reciproc/xylol. After filling removal, specimens were analyzed by microCT to separately verify the presence of gutta-percha and sealer remnants. The data (mm3) were analyzed by two way ANOVA and Tukey´s test (5%). For the remaining gutta-percha, the use of xylol provided the highest values for Reciproc (7.60 ± 0.73), which was statistically different from the other groups (p < 0.05) that presented lower values and were statistically similar to each other (p > 0.05). For the remaining sealer, xylol provided the highest values (21.25 ± 6.94) different (p < 0.05) from the use of instruments alone (11.47 ± 9.45). ProTaper Next presented the lowest values (8.16 ± 1.37) for the remaining sealer, different (p < 0.05) from that of Reciproc (24.67 ± 6.32). The qualitative analysis revealed that all groups presented some remaining root filling material, with the highest volumes presented by Reciproc and Reciproc/xylol. In conclusion the rotary systems provided greater removal of filling material regardless of the use of xylol. The use of xylol negatively interfered with the action of the reciprocating system in the removal of the gutta-percha and sealer.

Critical analysis of research methods and experimental models to study removal of root filling materials

Despite enjoying high favourable outcome rates, root canal treatment is not always successful. Root canal retreatment is a widely practised option for managing a non-healing root treated tooth. A basic distinction between retreatment and initial treatment is the requirement to remove the existing root filling material occupying the root canal space. Only then, can the technical deficiencies and possible causes of failure be addressed. Hence, the successful removal of the root filling material is critical to achieving the objectives of retreatment. Many different materials and techniques have been used for root canal filling, which have been documented in a plethora of studies; these are mainly laboratory studies investigating the removal of root filling materials. To help guide future research, which may then better inform clinical practice in relation to retreatment procedures, the focus of this narrative review is on the research methods and experimental models employed to study the removal of root filling materials. The current available literature demonstrates great variation in the research methodologies used to study the removal of root filling material, including direct visualization by splitting tooth samples or clearing, three-dimensional radiographic imaging including using microcomputed tomography or cone-beam computed tomography, and a combination of these techniques. Depending on the research method employed, variation also exists in quantification of root filling material removal; these include measurements of surface area, volume or weight, and criteria-based (semi-quantitative) assessment. Experimental models, using human teeth or resin models, differ with respect to standardization techniques and replication of the clinical scenario including initial sample preparation, canal filling, allocation and technical aspects of retreatment procedures. Future models should replicate, as closely as possible, the clinical scenario. Currently, microcomputed tomography provides a highly detailed, non-invasive and non-destructive method of objectively assessing and quantifying root filling removal.

Effect of a novel laser-initiated photoacoustic activation of a solvent or sodium hypochlorite in the removal of filling remnants after retreatment of curved root canals

BACKGROUND

This study aimed to evaluate the effect of Er:YAG laser-initiated shockwave-enhanced emission of photoacoustic streaming (SWEEPS®) and passive ultrasonic irrigation (PUI) combining thymol-based solvent or sodium hypochlorite (NaOCl) in the removal of filling remnants from curved canals.

METHODS

Forty-eight curved root canals were instrumented and filled with an epoxy-resin-based sealer and gutta-percha. The canals were retreated with a Wave One Gold primary file (tip size 25; variable taper) and sodium hypochlorite (NaOCl). After the retreatment, the samples were randomly divided into four groups according to the additional irrigation protocol: PUI/NaOCl, PUI/solvent, SWEEPS®/NaOCl or SWEEPS®/solvent. The volume of filling material in root canal was measured after root canal filling, after mechanical retreatment, after final irrigation protocol and after additional irrigation protocol, using micro-CT. The results were analyzed using Kruskal-Wallis test with the post-hoc Mann-Whitney U test and Wilcoxon test (α=0.05).

RESULTS

In the PUI group, irrigation with the solvent or NaOCl resulted in similar filling reduction (p = 0.224). In the SWEEPS® group, irrigation with NaOCl resulted in a significantly greater filling reduction compared to the solvent (p = 0.021). The SWEEPS®/NaOCl group was more effective than the PUI/NaOCl group (p = 0.008). No significant differences were found between PUI/solvent and SWEEPS® groups (p>0.05) and PUI/NaOCl and SWEEPS®/solvent group (p>0.05).

CONCLUSION

Although all tested protocols improved the removal of filling remnants from curved root canal, the SWEEPS® was more successful than PUI when NaOCl was used. Both tested techniques showed similar efficacy when in combination with the solvent.

The efficacy of different instruments combined with Nd:YAP in endodontic retreatment

BACKGROUND

To evaluate the efficiency of endodontic retreatment using different instruments and observe whether the Nd:YAP laser can assist.

METHODS

Eighty premolars were selected, of which the root canals were prepared, and were filled with both gutta-percha and AH plus. The teeth were randomly divided into eight groups, respectively using and not using the Nd:YAP laser with the use of H files, Reciproc files, Mtwo R files, and Mtwo R + H files to remove the root-canal filling material. The retreatment time of each sample was recorded, and the amount of residual gutta-percha was calculated by Image J.

RESULTS

(I) In the four no-Nd:YAP laser groups, the Mtwo R group and Reciproc group took the least time, and there was no statistical difference between them (P>0.05). The Mtwo R + H file group took longer than the Mtwo R group and Reciproc group (P<0.05). The H file group took the longest time (P<0.05). (II) In the Nd:YAP laser group, the H file group took the longest time (P<0.05), and there were no significant statistical difference between the other three groups (P>0.05). (III) The Nd:YAP laser groups took a longer time than the no-Nd:YAP laser groups (P<0.05). (IV) All of the groups had residues. (V) The residues in the Mtwo R + H files group and the Reciproc group were the least among the four groups (P<0.05), and the residues in the Mtwo R group were the most (P<0.05). (VI) The residues in the Mtwo R and H file groups of the Nd:YAP laser groups were less than those of the no-Nd:YAP laser groups (P<0.05), and the residues in the Reciproc and the Mtwo R + H file groups of the Nd:YAP laser group showed no statistical difference with that of the no-Nd:YAP laser group (P>0.05).

CONCLUSIONS

None of the experimental methods could altogether remove the root-filling material. The Nd:YAP laser could assist, but the procedure still took a long time and the efficiency of endodontic retreatment was limited. Using the Mtwo R + H or Reciproc file was the most efficient.

Supplementary solvent irrigation efficacy on filling remnants removal comparing XP-endo Finisher R vs IrriSafe

This study aimed to compare the efficacy of XP-endo Finisher R and IrriSafe, with a solvent mixture of Methyl ethyl ketone/Tetrachloroethylene (MEK/TCE), in the removal of root filling residues. Twenty-four human mandibular incisors were pair-matched by micro-computed tomography according to volume and aspect ratio. After retreatment, specimens were allocated to two experimental groups (n = 12), according to the supplementary instrument used. The volume of residual filling material after each irrigating step and the time for retreatment was calculated. Statistical analyses were carried out using Mann-Whitney test, with a significance level of 5%. The volume of initial root canal filling material between the groups was similar (p > 0.05). With the final irrigation protocol (NaOCl and EDTA) the volume of the filling remnants decreased significantly (p < 0.05) with no differences between IrriSafe or XP-endo Finisher R (p > 0.05). The additional solvent mixture MEK/TCE increased the efficiency of filling materials reduction, regardless of the agitating instruments employed, IrriSafe or XP-endo Finisher R (p < 0.05). There was no difference between the two groups regarding the time (p = 0.149). Both supplementary instruments were effective in the reduction of filling remnants. The additional step with a solvent mixture of MEK/TCE enabled a total recovery of patency and the achievement of cleaner canals, independently of the agitation instrument.

Safety and Effectiveness of Additional Apical Preparation using a Rotary Heat-treated Nickel-Titanium file with Larger Diameter and Minimum Taper in Retreatment of Curved Root Canals

OBJECTIVE

 The aim of this study was to investigate the effect of additional apical preparation using the ProDesign Logic (PDL) 50/.01 rotary heat-treated nickel-titanium (NiTi) file with a larger diameter and minimal taper for retreatment of curved root canals.

MATERIALS AND METHODS

 Mesial curved root canals of 12 mandibular molars were prepared using PDL 25/.06 and filled using the continuous wave of condensation technique and AH Plus sealer. After retreatment using ProDesign S (PDS) 25/.08, PDL 25/.06 and PDL 35/05, a complementary procedure was performed with PDL 50/.01. Microcomputed tomography (micro-CT) scanning was performed before and after retreatment procedures. The cyclic fatigue resistance of unused PDS 25/.08, PDL 25/.06, PDL 35/.05 and PDL 50/.01 instruments (n = 12) was evaluated in a stainless-steel device.

STATISTICAL ANALYSIS

 Data on the volumes of the root canals and the remaining filling materials were submitted to the paired t-test. Cyclic fatigue resistance data was submitted to one-way ANOVA and Tukey's tests (α = 0.05).

RESULTS

 Use of PDL 50/.01 decreased the remaining filling materials in the apical third (p < 0.05). The root canal volume was similar in the cervical and middle thirds before and after preparation using PDL 50/.01 (p > 0.05). PDL 50/.01 presented the highest cyclic fatigue resistance (p < 0.05).

CONCLUSIONS

 Use of the PDL 50/.01 instrument as an additional apical preparation for retreatment of curved root canals improved filling material removal in the apical third, while maintaining the dentin in the cervical and middle thirds. In addition, PDL 50/.01 presented high-flexural resistance.

Canal transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals: A micro-computed tomographic study

This study assessed the apical transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals. Thirty-eight roots were analysed using micro-CT for the comparison of apical transportation produced by two retreatment systems. Longitudinal transportation, horizontal transportation, variation in the canal angle of curvature and variation in the canal/root width ratio were analysed. Longitudinal transportation was frequently observed, regardless of the system used. The canals retreated with Mani GPR showed a significantly higher horizontal transportation at 1 mm from the root apex (P < 0.01) and greater variation of the canal curvature angle (P < 0.01). The canal/root width ratio was similar between groups (P > 0.05). In conclusion, longitudinal transportation occurred more frequently in the mesial canal walls. Mani GPR showed greater horizontal transportation at 1 mm short of the apex, and higher variation of the canal curvature angle compared with HyFlex NT.

Endodontic Retreatment Using a Single Instrument from four Nickel-Titanium Systems - A Micro-CT Study

Abstract This study evaluated the efficiency of using a single instrument from three different rotary multi-file systems and compared them with that of a reciprocating single-file for endodontic retreatment by means of micro-CT. Sixty extracted canines were prepared using a size F2 ProTaper Universal file and obturated. After 30 days of storage at 37ºC and 100% humidity, the teeth were randomly divided into four groups (n=15) based on the type of instrument used to retreatment: ProTaper Next (PTN), ProTaper Gold (PTG), TRUShape 3D (TS), and WaveOne (WO). The canals were retreated using only the size 40 instrument from each system according to the manufacturer’s recommendations for torque and speed. The time required to remove the filling material was recorded in seconds. The amount of initial and residual filling material and the quantity of dentin removed were assessed by means of micro-CT. Data were statistically analyzed (ANOVA and Kruskal-Wallis) at a 5% significance level. TS instruments required the highest (p<0.05) amount of time (mean, 384.80 ±144.92) compared with the WO (229.67±68.16) and PTG (248.67±64.22) and not so different from PTN instruments (327.67±133.3). No differences in the amount of dentin removed, initial and residual filling volume, and percentages of filling material were observed among the groups. The use of a single rotary instrument from the PTG, TS, and PTN systems was as effective as that of the single-file reciprocating WO system. However, none of the instruments was able to remove the filling materials completely.

Comparison of the Self-Adjusting File and Hedström File Used as Supplementary Instruments for the Remaining Filling Material Removal During Retreatment of C-Shaped Canals: A Micro-CT Study

Objective:

The aim of this study was to evaluate the use of Self-adjusting file (SAF) system and Hedström (H) file for removing remaining filling material (RFM) from C-shaped canals.

Methods:

20 C-shaped mandibular second molars with C1 configurations were instrumented, filled with tagger´s hybrid technique. Samples were divided into 2 groups (n=10). Reciproc R25 and a Mtwo 35/04 file were used for retreatment in both groups. Then, a 2.0 SAF file (group I) and a #35 H file (group II) were used as supplementary steps for RFM removal. Micro-CT scanning was performed after every procedure. Total volumes were calculated and converted into percentages. Also, the minimum wall thickness at 3, 5, 7 mm from apex was calculated. The Prism 7.0 software was used as the analytical tool with a significance of 5%.

Results:

Initial obturation removal was approximately 64% in group I and 67% in Group II. The apical third had the highest values of RFM. The use of a H file significantly reduced the RFM compared to SAF in the total canal length respectively (30% vs 18%) and at 1-3 mm and 3-6 mm when compared to the use of SAF. A statistically significant decrease of RFM and minimum wall thickness were observed in both groups (P<0.05).

Conclusion:

None of the retreatment techniques completely removed RFM. The apical region was the more unaffected area. Also, the SAF file was less effective than the H file in removing the RFM. Although C-shaped canals possesses thinner dentinal wall thickness, no excessive dentine removal was observed after each instrument use.

The retreatment abilities of ProTaper Next and F6 Skytaper: a micro-computed tomography study

Purpose

The aim of this study was to evaluate the retreatment abilities of the ProTaper Next (PTN) and F6 SkyTaper (F6) systems by using micro-computed tomography (microct), radiographic and microscopic imaging techniques.

Materials and methods

The root canals of twenty-six extracted mandibular premolar teeth were prepared and obturated. For the retreatment procedure, the teeth were randomly divided into two equal groups according to endodontic instruments: PTN (X4) and F6 (#40/.06). Pre- and post-operative filling material volumes were measured with micro-ct, and areas were measured with radiographic and microscopic imaging techniques. The percentages of residual material were calculated, and then statistically compared. The significance level was set at p<0.05.

Results

There was no statistically significant difference between F6 and PTN for retreatment efficacy in the micro-ct and radiographic imaging techniques (p>0.05). PTN demonstrated better cleaning ability when evaluated by microscopic imaging. (p<0.05). The correlation was moderate between micro-ct and radiographic, and micro-ct and microscopic imaging groups; however, it was strong between radiographic and microscopic imaging methods.

Conclusion

The PTN and F6 files had similar effects in the removal of filling material with microct evaluation. The radiographic imaging method gave similar results with micro-ct imaging.