Intraoperative imaging and navigation with mobile cone-beam CT in maxillofacial surgery

Analysis of the implementation of a circuit for intra-operative superposition and comparison of the surgical outcomes using ICBCT in maxillofacial surgery

PURPOSE

This paper describes a novel circuit for intraoperative analysis with ICBCT in maxillofacial surgery. The aim is to establish guidelines, define indications, and conduct an analysis of the implementation of the circuit for intraoperative comparison of surgical outcomes in relation to 3D virtual planning in maxillofacial surgery.

METHODS

The study included 150 maxillofacial surgical procedures. Intraoperative actions involved fluoroscopy localization, intraoperative CBCT acquisition, segmentation, and superimposition, among other steps. Surgical times due to intraoperative superposition were measured, including time required for ICBCT positioning and acquisition, image segmentation, and comparison of 3D surfaces from the surgical planning.

RESULTS

Successful intraoperative comparison was achieved in all 150 cases, enabling surgeons to detect and address modifications before concluding the surgery. Out of the total, 26 patients (17.33%) required intraoperative revisions, with 11 cases (7.33%) needing major surgical revisions. On average, the additional surgical time with this circuit implementation was 10.66 ± 3.03 min (n = 22).

CONCLUSION

The results of our research demonstrate the potential for performing intraoperative surgical revision, allowing for immediate evaluation, enhancing surgical outcomes, and reducing the need for re-interventions.

Enhancing Cranio-Maxillofacial Fracture Care in Low- and Middle-Income Countries: A Systematic Review

Background: Cranio-maxillofacial (CMF) injuries represent a significant challenge in low- and middle-income countries (LMICs), exacerbated by inadequate infrastructure, resources, and training. This systematic review aims to evaluate the current strategies and solutions proposed in the literature to improve CMF fracture care in LMICs, focusing on education, patient transfer, and off-label solutions. Methods: A comprehensive literature search was conducted using PubMed/Medline from January 2000 to June 2023. Studies were selected based on the Preferred Reporting Items for Systematic Review and Meta-analysis Statement (PRISMA). Solutions were categorized into three main areas: education (digital and on-site teaching, fellowships abroad), patient transfer to specialized clinics, and off-label/non-operative solutions. Results: Twenty-three articles were included in the review, revealing a consensus on the necessity for enhanced education and training for local surgeons as the cornerstone for sustainable improvements in CMF care in LMICs. Digital platforms and on-site teaching were identified as key methods for delivering educational content. Furthermore, patient transfer to specialized national clinics and innovative off-label techniques were discussed as immediate solutions to provide quality care despite resource constraints. Conclusions: Effective CMF fracture care in LMICs requires a multifaceted approach, prioritizing the education and training of local healthcare professionals, facilitated patient transfer to specialized centers, and the adoption of off-label solutions to leverage available resources. Collaborative efforts between international organizations, local healthcare providers, and educational institutions are essential to implement these solutions effectively and improve patient outcomes in LMICs.

Three-dimensional measurements of symmetry for the mandibular ramus

BACKGROUND

The study examines a sample of patients presenting for viscerocranial computer tomography that does not display any apparent signs of asymmetry, assesses the three-dimensional congruency of the mandibular ramus, and focuses on differences in age and gender.

METHODS

This cross-sectional cohort study screened viscerocranial CT data of patients without deformation or developmental anomalies. Segmentations were obtained from the left and right sides and superimposed according to the best-fit alignment. Comparisons were made to evaluate three-dimensional congruency and compared between subgroups according to age and gender.

RESULTS

Two hundred and sixty-eight patients were screened, and one hundred patients met the inclusion criteria. There were no statistical differences between the left and right sides of the mandibular ramus. Also, there were no differences between the subgroups. The overall root mean square was 0.75 ± 0.15 mm, and the mean absolute distance from the mean was 0.54 ± 0.10 mm.

CONCLUSION

The mean difference was less than one millimetre, far below the two-millimetre distance described in the literature that defines relative symmetry. Our study population displays a high degree of three-dimensional congruency. Our findings help to understand that there is sufficient three-dimensional congruency of the mandibular ramus, thus contributing to facilitating CAD-CAM-based procedures based on symmetry for this specific anatomic structure.

Surgical navigation in maxillofacial surgery: A French national survey

PURPOSE

to gain a national understanding of the utilization of surgical navigation among maxillofacial surgeons in France through a web-based questionnaire.

METHODS

A 14-point multiple-choice questionnaire was created and distributed to the participants, divided into two sections. The first section gathered general information about the respondents, and the second section provided an overview of the use of surgical navigation.

RESULT

A total of 75 participants completed the survey. The results showed that a majority of university hospital departments (65%) utilize an intra-operative 3D imaging system, while very few private clinics and general hospitals use this technology.

CONCLUSION

The survey suggests that surgical navigation is primarily used in university centers in French maxillofacial surgery, with limited utilization and non-standardized indications for use.

Mandibular Fractures: Diagnosis and Management

Accurate evaluation, diagnosis, and management of mandibular fractures is essential to effectively restore an individual's facial esthetics and function. Understanding of surgical anatomy, fracture fixation principles, and the nuances of specific fractures with respect to various patient populations can aid in adequately avoiding complications such as malocclusion, non-union, paresthesia, and revision procedures. This article reviews comprehensive mandibular fracture assessment, mandibular surgical anatomy, fracture fixation principles, management considerations, and commonly encountered complications. In addition, this article reviews emerging literature examining 3-dimensional printing and intraoperative imaging.

The Application of Intraoperative Computed Tomography in Surgical Management of Temporomandibular Joint Ankylosis

PURPOSE

To investigate the application and value of intraoperative computed tomography (CT) in the surgical management of temporomandibular joint (TMJ) ankylosis.

PATIENTS AND METHODS

Patients who underwent surgery of TMJ ankylosis with the aid of intraoperative CT scan from July 2016 to December 2018 were retrospectively studied. Demographics, type of ankylosis, surgical method, intraoperative CT scan time, radiographic evidence, the CT-directed revision rate, and clinical outcomes were analyzed.

RESULTS

Four patients (5 sides) were successfully operated with the aid of intraoperative CT imaging, and CT-directed revisions were made in 3 of them during surgery. The average time spent in CT scanning was (10.2 ± 3.3) minutes. No surgical complications were noted, and a good satisfaction rate (with an average maximum mouth opening of 38.8 mm and no recurrence during the follow-up period) was obtained.

CONCLUSIONS

Intraoperative CT scanning is a helpful tool in the evaluation of the radiographic result of TMJ ankylosis, and a real-time revision could be made. It increased the precision and safety of the surgery of TMJ ankylosis.

Intraoperative Fluoroscopy Reduces Complication and Reoperation Rate in Facial Fractures

Purpose: The purpose of this study is to evaluate surgical outcomes of facial fractures after the introduction of intraoperative radiology. Methods: An historic cohort of patients without intraoperative fluoroscopy (IOF) was compared with a prospective cohort of patients with IOF. Main outcomes were postoperative complications and reoperation rate. Results: There were 51 in the non-IOF group and 49 in the IOF group. In the group with IOF 10 patients required intraoperative revisions (20.46%). Overall postoperative complication rate was higher in the non-IOF group (25.49% vs. 6.12%) due to the significantly higher bone-related complication rate (15.69% vs. 2.04%). Reoperation rate was also higher in the non-IOF group (11.76% vs. 0%). Conclusion: This study demonstrates that IOF reduces bone-related complication and reoperation rate by allowing correction of surgical errors immediately during surgery.

How useful is intraoperative cone beam computed tomography in maxillofacial surgery? An overview of the current literature

Intraoperative imaging is increasingly used by surgeons and has become an integral part of many surgical procedures. This study was performed to provide an overview of the current literature on the intraoperative use of cone beam computed tomography (CBCT) imaging in maxillofacial surgery. A bibliographic search of PubMed was conducted in March 2020, without time limitation, using "intraoperative imaging" AND "maxillofacial surgery" AND "cone beam computed tomography" as key words. Ninety-one articles were found; after complete reading, 16 articles met the eligibility criteria and were analysed. The results showed that the majority of the indications were related to maxillofacial trauma, particularly zygomaticomaxillary complex fractures. Final verification with intraoperative CBCT before wound closure was the most common use of this device. However, innovative uses of intraoperative CBCT are expanding, such as CBCT coupling with mirror computational planning, and even the combined use of initial intraoperative CBCT acquisition with navigation. Immediate, fast, and easy evaluation of bone repositioning to avoid the need for further surgical revision is the main advantage of this technique. Imaging quality is comparable to that of multi-slice computed tomography, but with lower radiation exposure. Nevertheless, CBCT is still not widely available in maxillofacial centres, probably because of its cost, and perhaps because not everyone is aware of its advantages and versatility, which are reported in this review.

Fibrous dysplasia of the orbital region: Series of 12 cases and review of the literature

PURPOSE

Fibrous dysplasia (FD) is a benign fibro-osseous developmental disorder of growing bone, sometimes involving the craniofacial skeleton (CFD). We wish to present a patient series with CFD of the orbital region and discuss treatment modalities.

METHODS

Twelve patients were referred for orbital CFD in the Nantes University Hospital between 2000 and 2018 and studied according to the clinical parameters, radiological features, and modalities of treatment.

RESULTS

The mean age was 25.6 years. Ten patients exhibited facial asymmetry with vertical globe dystopia (75%), proptosis (58%) and facial bump (50%). The disease was monostotic in 83% of patients, involving the frontal bone (25%), the sphenoidal bone (33%), the fronto-sphenoidal complex (25%), and the skull base (17%). Unilateral radiological proptosis was found in 7 patients, with a mean protrusion 3.9mm. The optic canal was involved in 75% of patients, with no functional impairment. Three patients were treated with bisphosphonate therapy to stop progression of the disease; 6 patients were given a bone remodelling procedure with good aesthetic outcomes.

CONCLUSION

The orbit is a rare localization for FD causing aesthetic and functional disabilities. Medical and surgical treatment can be proposed as part of a multidisciplinary approach.