Exploration of variables in the fabrication of pyrolysed photoresist

Tefashe U. Comment on “Extent of conjugation in diazonium-derived layers in molecular junction devices determined by experiment and modelling” by C. Van Dyck, A. J. Bergren, V. Mukundan, J. A. Fereiro and G. A. DiLabio, Phys. Chem. Chem. Phys., 2019, , 16762

Misinterpretation of scanning tunnelling microscopy results and sampling error yielded incorrect conclusions about the flatness of a carbon electrode substrate used for molecular electronic devices.

Robust All-Carbon Molecular Junctions on Flexible or Semi-Transparent Substrates Using "Process-Friendly" Fabrication

Large area molecular junctions were fabricated on electron-beam deposited carbon (eC) surfaces with molecular layers in the range of 2-5.5 nm between conducting, amorphous carbon contacts. Incorporating eC as an interconnect between Au and the molecular layer improves substrate roughness, prevents electromigration and uses well-known electrochemistry to form a covalent C-C bond to the molecular layer. Au/eC/anthraquinone/eC/Au junctions were fabricated on Si/SiOx with high yield and reproducibility and were unchanged by 10(7) current-voltage cycles and temperatures between 80 and 450 K. Au/eC/AQ/eC/Au devices fabricated on plastic films were unchanged by 10(7) current density vs bias voltage (J-V) cycles and repeated bending of the entire assembled junction. The low sheet resistance of Au/eC substrates permitted junctions with sufficiently transparent electrodes to conduct Raman or UV-vis absorption spectroscopy in either reflection or transmission geometries. Lithographic patterning of Au/eC substrates permitted wafer-scale integration yielding 500 devices on 20 chips on a 100 mm diameter wafer. Collectively, eC on Au provides a platform for fabrication and operation of chemically stable, optically and electrically functional molecules on rigid or flexible materials. The relative ease of processing and the robustness of molecular junctions incorporating eC layers should help address the challenge of economic fabrication of practical, flexible molecular junctions for a potentially wide range of applications.

Recent development of carbon electrode materials and their bioanalytical and environmental applications

New synthetic approaches, materials, properties, electroanalytical applications and perspectives of carbon materials are presented.

Light-induced organic monolayer modification of iodinated carbon electrodes

We report the modification of carbon electrodes formed from pyrolyzed photoresist films (PPF) via plasma iodination followed by the organic monolayer modification of these surfaces. The iodinated surfaces were characterized using cyclic voltammetry, atomic force microscopy, and X-ray photoelectron spectroscopy to enable the optimization of the iodination while preserving the stability and smoothness of the carbon surface. Subsequently, the C-I surface was further modified with molecules that possess an alkene or alkyne at one end through light activation with low energy (visible range λ 514 nm). The versatility of the modification reaction of the C-I surfaces is shown by reactions with undecylenic acid, 1,8-nonadiyne, and S-undec-10-enyl-2,2,2-trifluoroethanethioate (C11-S-TFA). Modification with 1,8-nonadiyne allows further modification via "click" chemistry with azido-terminated oligo(ethylene oxide) molecules demonstrated briefly to alter the hydrophilicity of the surface after attachment of ethylene oxide moieties. Furthermore, patterning of C11-S-TFA was demonstrated using a simple photolithography technique. Deprotection of the C11-S-TFA gave a free thiol allowed patterning of gold nanoparticles on the surface as verified using scanning electron microscopy (SEM). These results demonstrate that plasma iodination to form C-I is a versatile, simple, and modular approach to functionalize the carbon surface.

Regeneration of pyrolyzed photoresist film by heat treatment

A simple, time-, and cost-effective procedure is described for regenerating film-modified or deactivated pyrolyzed photoresist film (PPF) surfaces. Heating for 30 min at 545 ± 25 °C in argon at a flow rate of 1 L min(-1) removes covalently bound thin organic films, attached via electrografting from aryldiazonium salt solutions. The heat-treated surfaces exhibit improved electrochemical characteristics compared to those prior to modification and can be reused for solution-based electrochemical measurements and for electrografting. The same treatment reactivates PPF electrodes that have been deactivated by exposure to adsorbates from air or solution. X-ray photoelectron spectroscopy (XPS), atomic force microscopy, and water contact angle measurements establish that the regeneration procedure does not lead to significant changes in oxygen content, roughness, or hydrophobicity of PPF surfaces. XPS measurements also confirm the complete removal of covalently attached organic films after heat treatment but reveal a specific interaction between grafted nitrophenyl films and PPF which results in a small amount of N incorporation in the surface.