Green biosynthesis of silver nanoparticles and nanomolar detection of p-nitrophenol

A diazonium-functionalized silver electrode for the sensitive amperometric detection of p-nitrophenol in water over a wide range of concentrations

This work presents a novel approach for the electrochemical detection of p-nitrophenol (pNP) focusing on the development of a simple and efficient strategy to overcome pNP adsorption. The proposed method involves the functionalization of a silver (Ag) electrode with an electrografted, thin diazonium film. After characterization by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry, the as-functionalized electrode allowed a wide linear detection range to be established in aqueous solutions, spanning from 1 to 500 μM pNP. This outcome indicates that the diazonium film effectively addresses any issues related to adsorption with good repeatability and reproducibility. Furthermore, the sensor's analytical performances were evaluated yielding a sensitivity and a limit of detection of 0.3819 μA cm-2 μM-1 and 600 nM, respectively. The sensor was also found to exhibit a good selectivity towards pNP and phenolic compounds and was successfully tested on a real water sample.

Using silver nanoparticle-decorated whey protein isolate amyloid fibrils to modify the electrode surface used for electrochemical detection of para-nitrophenol

Due to their organized structures, remarkable stiffness, and nice biocompatibility and biodegradability, amyloid fibrils serve as building blocks for versatile sustainable materials. Silver nanoparticles (AgNPs) are commonly used as the nano-catalysts for various electrochemical reactions. Given their large specific surface area and high surface energy, AgNPs exhibit high aggregation propensity, which hampers their electrocatalytic performance. Food protein wastes have been identified to be associated with climate change and environmental impacts, and a surplus of whey proteins in dairy industries causes high biological and chemical demands, and greenhouse gas emissions. This study is aimed at constructing sustainable electrode surface modifiers using AgNP-deposited whey protein amyloid fibrils (AgNP/WPI-AFs). AgNP/WPI-AFs were synthesized and characterized via spectroscopic techniques, electron microscopy, and X-ray diffraction. Next, the electrocatalytic performance of AgNP/WPI-AF modified electrode was assessed via para-nitrophenol (p-NP) reduction combined with various electrochemical analyses. Moreover, the reaction mechanism of p-NP electrocatalysis on the surface of AgNP/WPI-AF modified electrode was investigated. The detection range, limit of detection, sensitivity, and selectivity of the AgNP/WPI-AF modified electrode were evaluated accordingly. This work not only demonstrates an alternative for whey valorization but also highlights the feasibility of using amyloid-based hybrid materials as the electrode surface modifier for electrochemical sensing purposes.

Chemically Exfoliated Titanium Carbide MXene for Highly Sensitive Electrochemical Sensors for Detection of 4-Nitrophenols in Drinking Water

Soil and water contamination by numerous pollutants has been increasingly posing threats to food, water, agriculture, and human health. Using novel nanoscale materials to develop rapid electrochemical sensors is very promising due to the discovery of a number of new two-dimensional (2D) electronic materials. Of particular importance is 2D transition-metal carbide MXene that has been shown to possess transformative properties pertaining to its physical, chemical, and environmental characteristics, leading to their potential sensor applications. Designing electrochemical sensors using MXene has the potential to pave the way for monitoring environmental pollutants. Here, a stacked layer of chemically exfoliated MXene (Ti₃C₂T _x ) was demonstrated as an electrochemical sensor for detection of 4-nitrophenol (4-NP) with high sensitivity and a low limit of detection. Successful selective exfoliation of the MAX (Ti₃AlC₂) phase of the material by chemical etching without oxidation is shown to be the key to achieving higher sensitivity and a lower detection limit. In the optimal conditions, the proposed MXene sensor electrodes were capable of detecting 4-NP in a broad concentration range from 500 nM to 100 μM with a good linear sensing range (regression fit, R = 0.995). The higher sensitivity and notable limit of detection reached about 16.35 μA μM^-1 cm^-2 and 42 nM/L, respectively, with good reproducibility and repeatability. The real-time application of the proposed MXene sensor electrodes was confirmed by testing in tap water samples with excellent recoveries of 95-99%.

Nickel/nitrogen-doped carbon nanocomposites: Synthesis and electrochemical sensor for determination of p-nitrophenol in local environment

A novel electrochemical sensor was prepared using N-doped carbon mesoporous materials supported with nickel nanoparticles (Ni-NCs) for environmental p-nitrophenol (p-NP) detection in a specific geographical area. These as-prepared Ni-NCs were dispersed in polyethyleneimine (PEI) solution and modified onto a glassy carbon electrode (GCE) for electrocatalytic reduction of p-NP. The Ni-NCs-PEI/GCE showed a high Faraday current at -0.302 V during p-NP reduction, because of the synergistic effect between Ni-NCs and PEI. Under ideal conditions, the Ni-NCs-PEI/GCE was used in the voltametric determination of p-NP, with high sensitivity. The linear ranges for p-NP are 0.06-10 μM and 10-100 μM with low detection limit (4.0 nM) and high sensitivity (1.465 μA μM^-1 cm^-2). In the presence of other phenolic compounds, this sensor showed good selectivity for p-NP detection. The Ni-NCs-PEI/GCE was also used to determine p-NP in environmental water samples of a specific geographical area, with recoveries ranging from 95.9% to 109.4%, and an RSD of less than 3.6%. Therefore, this novel Ni-NCs-PEI/GCE provides a good example for the design of other carbon-based nanocomposite materials, for electrochemical detection of trace p-NP in a specific geographical area.

Bio-AgNPs-based electrochemical nanosensors for the sensitive determination of 4-nitrophenol in tomato samples: the roles of natural plant extracts in physicochemical parameters and sensing performance

The present work reports efficient electrochemical nanosensors for the sensitive monitoring of 4-nitrophenol (4-NP) in tomato samples using various biosynthesized silver nanoparticles (bio-AgNPs). Three different bio-AgNP types were synthesized using natural plant extracts, including green tea (GT) leaf, grapefruit peel (GP), and mangosteen peel (MP), aiming to investigate their effects on the formation of bio-AgNPs, as well as the analytical performance of 4-NP. Based on the obtained results, it was found that the phytochemical content in various plant extracts directly influenced the physicochemical parameters of the created bio-AgNPs, such as particle size, crystallinity, and distribution. More importantly, these parameters have decisive effects on the electrocatalytic activity, conductivity, and electrochemical sensing performance of electrodes modified with them for 4-NP detection. Among the three bio-AgNPs evaluated, the GT-AgNPs (using green tea leaf extract) with uniform shape, small size without aggregation, and high crystallinity showed the best analytical performance for 4-NP determination. The electrode-modified GT-AgNPs exhibited a good 4-NP analytical performance with an electrochemical sensitivity of 1.25 μA μM⁻¹ cm⁻² and a detection limit of 0.43 μM in the detection range from 0.5 to 50 μM. The practical applicability of the sensor was also studied in tomato samples, promising satisfactory results toward 4-NP detection in other real samples.

In this work, we systematically investigated and compared the electrochemical sensing performances of three electrodes modified with various bio-AgNPs toward 4-NP detection in tomato samples.

Detection and remediation of pollutants to maintain ecosustainability employing nanotechnology: A review

Environmental deterioration due to anthropogenic activities is a threat to sustainable, clean and green environment. Accumulation of hazardous chemicals pollutes soil, water and air and thus significantly affects all the ecosystems. This article highlight the challenges associated with various conventional techniques such as filtration, absorption, flocculation, coagulation, chromatographic and mass spectroscopic techniques. Environmental nanotechnology has provided an innovative frontier to combat the aforesaid issues of sustainable environment by reducing the non-requisite use of raw materials, electricity, excessive use of agrochemicals and release of industrial effluents into water bodies. Various nanotechnology based approaches including surface enhance scattering, surface plasmon resonance; and distinct types of nanoparticles like silver, silicon oxide and zinc oxide have contributed significantly in detection of environmental pollutants. Biosensing technology has also gained significant attention for detection and remediation of pollutants. Furthermore, nanoparticles of gold, ferric oxide and manganese oxide have been used for the on-site remediation of antibiotics, organic dyes, pesticides, and heavy metals. Recently, green nanomaterials have been given more attention to address toxicity issues of chemically synthesized nanomaterials. Hence, nanotechnology has provided a platform with tremendous applications to have sustainable environment for present as well as future generations. This review article will help to understand the fundamentals for achieving the goals of sustainable development, and healthy environment.

Scalable Electrochemical Synthesis of Novel Biogenic Silver Nanoparticles and Its Application to High-Sensitive Detection of 4-Nitrophenol in Aqueous System

This study reports a scalable green electrochemical synthesis of novel biogenic silver nanoparticles colloid (biogenic AgNPs) in large scale up to 5 liters using the bulk silver bar and the green tea leaves (Camellia sinensis) extract (GTE) as reducing agent during the electrochemical process. Under a direct-current voltage source, the biomolecules in GTE can release electrons to promote the reducing process of Ag+ to Ag0. More interestingly, the formation of the intermediate complex helps to cap on the nanoparticles, which leads to stabilizing AgNPs. The as-synthesized biogenic AgNPs with the size of 34 nm exhibit the outstanding electrochemical properties due to the presence of biomolecules on the biogenic AgNPs surface, which facilitates the effective attaching of AgNPs on the carbon surface of the screen-printed carbon electrode (SPE) through the formation of the strong C-O coordinate bonds between O atom of oxygen functional groups and C atom of SPE. The electrochemical properties of the biogenic AgNPs-modified SPE are enhanced significantly in comparison with bare SPE and pure AgNPs-SPE. The biogenic AgNPs-SPE is applied successfully to the detection of 4-nitrophenol (4-NP). The electrochemical sensor using biogenic AgNPs can reliably detect 4-NP in the linear range from 0.1 to 25 μM with the sensitivity about 6.69 μA μM-1 cm-2. The present work reveals, as the greener synthesis method with ultra-large scalable ability, high purity, and excellent electrochemical properties of biogenic AgNPs is very promising for technological applications in high-sensitive electrochemical chemosensors, nanopharmaceuticals, and other fields.

Size-controllable synthesis of zinc ferrite/reduced graphene oxide aerogels: efficient electrochemical sensing of p-nitrophenol

In this study, a nonaqueous method for the synthesis of size-controlled highly crystalline zinc ferrite/reduced graphene oxide (ZFO/rGO) aerogel was provided by using benzyl alcohol as the medium. In our findings, benzyl alcohol was introduced not only as the solvent, but the structure-directing agent and strong reducing agent during the nucleation and growth of ZnFe₂O₄ nanoparticles (NPs). The characterization analysis indicated that ZnFe₂O₄ NPs were immobilized on the multilayer rGO with a controllable size of 12 nm. Moreover, the 3D ZFO/rGO aerogel shows excellent electrochemical property as a facile electrochemical sensor for the detection of p-nitrophenol (p-NP). The ZFO/rGO electrochemical sensing offers the advantages of wide linear range (1-500 μmol l^-1), excellent sensitivity (23.985 mA mM^-1 cm^-2), good stability and selectivity (<8.8%). In addition, the possible reaction mechanism of 3D ZFO/rGO aerogel was explained during the detection process under acidic condition. Significantly, our results not only provided insight into the possible reaction mechanism of 3D ZFO/rGO nanocomposite, but proposed the way for the synthesis of highly crystalline materials through a benzyl alcohol-mediated method.

Green synthesis of silver nanoparticles using aqueous rhizome extract of Zingiber officinale and Curcuma longa: In-vitro anti-cancer potential on human colon carcinoma HT-29 cells

This study was aimed to analyze the anti-cancer activity of silver nanoparticles (AgNPs) synthesized using aqueous plant extracts from the rhizome of Curcuma longa and Zingiber officinale. Synergistic aqueous extract of rhizome of C. longa and Z. officinale was used to green synthesis of AgNPs. Characterization of AgNPs was performed using UV–visible spectroscopy, FTIR, X-ray diffraction, TEM, and SEM analyses. Anti-cancer activity of AgNPs against human colon carcinoma (HT-29) cells was tested using MTT assay. UV–Visible spectroscopy analysis indicated the surface plasmon resonance (SPR) sharp peak at 350–430 nm wavelength that corresponds to the production of AgNPs. FTIR analysis reveals that existence of carboxyl (—C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O) and amine (N—H) functional groups in the AgNPs. The X-ray diffraction analysis confirms four spectral peaks at 111, 200, 220, and 311. SEM analysis showed that AgNPs are in a spherical shape with a size of 42–61 nm and TEM analysis showed particle size are ranged between 20–51 nm. Anti-cancer study reveals that AgNPs had shown cytotoxicity against HT-29 cells at the concentrations ranged from 25 to 500 μg/mL and IC₅₀ at 150.8 µg/mL. This study concludes that AgNPs synthesized using rhizome of Z. officinale and C. longa possesses potential anti-cancer activity.

Biogenesis of Prism-Like Silver Oxide Nanoparticles Using Nappa Cabbage Extract and Their p-Nitrophenol Sensing Activity

The present study aimed to explore the eco-friendly synthesis of prism-like silver oxide nanoparticles (Ag₂ONPs) from nappa cabbage extract and its p-nitrophenol sensing activity. The prepared Ag₂ONPs were characterized by X-ray diffraction (XRD), field-emission scanning spectroscopy (FESEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet (UV)-visible light spectral analysis (UV-Vis). p-Nitrophenol sensing properties of the prepared nanoparticles were also determined using a simple I-V method. The results showed that the as-prepared Ag₂ONPs have a face-centered cubic (fcc) crystalline nature and a prism-like morphology with particle size in the range 21.61-92.26 nm. The result also showed a high intensity of the (111) facet, making the Ag₂ONP-carbon black/nickel foam electrode (Ag₂ONP-C/NFE) exhibit a high-performance response to p-nitrophenol spanning a wide range of concentrations from 1.0 mM to 0.1 pM and a response time of around 5 s, indicating a high potential for water treatment applications.

Design strategy of rGO–HNT–AgNPs based hybrid nanocomposite with enhanced performance for electrochemical detection of 4-nitrophenol

We report a highly precise and sensitive electrochemical sensor to detect 4-nitrophenol based on halloysite nanotubes with silver nanoparticles decorated on reduced graphene oxide.

Hydrothermal Synthesis of Cr2Se3 Hexagons for Sensitive and Low-level Detection of 4-Nitrophenol in Water

We report a simple hydrothermal method used for the synthesis of Cr₂Se₃ hexagons (h-Cr₂Se₃) and its application towards electrochemical sensing of 4-nitrophenol (4-NP). The formation of h-Cr₂Se₃ was confirmed by using scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical activity of the h-Cr₂Se₃ modified screen-printed carbon electrode (SPCE) towards 4-NP was studied using cyclic voltammetry (CV) and amperometric i-t techniques. Typically, the obtained results were compared with those for a bare SPCE. The CV result clearly reveals that h-Cr₂Se₃ modified SPCE has higher catalytic activity towards reduction of 4-NP than bare SPCE. Hence, h-Cr₂Se₃ modified SPCE was concluded as a viable sensor for sensitive determination of 4-NP. Under optimized conditions, h-Cr₂Se₃ modified SPCE demonstrates the excellent capacity to detect the 4-NP in a linear range from 0.05 µM to 908.0 µM. The LOD and sensitivity in detection of 4-NP were determined at 0.01 µM and 1.24 µAµM⁻¹ cm⁻² respectively. The sensor is highly selective and stable and shows reproducible recovery of 4-NP in domestic supply and river water samples.

Determination of 4-nitrophenol in water by use of a screen-printed carbon electrode modified with chitosan-crafted ZnO nanoneedles

The toxicity and environmental pollution by nitro aromatic compounds in water samples is the most recognized problem in worldwide. Hence, we have developed a simple and highly sensitive electrochemical method for the determination of 4-nitrophenol (4-NP) in water samples based on a chitosan (CHT) crafted zinc oxide nanoneedles (ZnO NDs) modified screen printed carbon electrode. The CHT/ZnO NDs were characterized by Field emission scanning electron microscope, Fourier transform infrared spectroscopy and X-ray diffraction technique. The CHT/ZnO NDs modified electrode showed an enhanced electrocatalytic activity and lower potential detection towards 4-NP, compared with other modified electrodes. Under optimum conditions, the differential pulse voltammetry (DPV) response of CHT/ZnO NDs modified electrode displayed a wide linear response range from 0.5 to 400.6μM towards the detection of 4-NP with a detection limit (LOD) of 0.23μM. The CHT/ZnO NDs modified electrode was used for specific and sensitive detection of 4-NP in presence of possible interfering species and common metal ions with long-term stability. In addition, the excellent analytical performance of the proposed sensor was successfully applied for determination of 4-NP in water samples.

Ag nanoshell catalyzed dedying of industrial effluents

A rapid way to dedye industrial effluents is reported herein using silver nanoshells (Ag-NSs) as a green catalyst.

Green synthesized silver nanoparticles decorated on reduced graphene oxide for enhanced electrochemical sensing of nitrobenzene in waste water samples

In the present work, an electrochemical sensor for nitrobenzene has been developed based on a green synthesized silver nanoparticle (AgNP) decorated reduced graphene oxide (RGO) modified glassy carbon electrode (GCE).

Green synthesis of gold nanoparticles for trace level detection of a hazardous pollutant (nitrobenzene) causing Methemoglobinaemia

The present study involves a green synthesis of gold nanoparticles (Au-NPs) using Acacia nilotica twig bark extract at room temperature and trace level detection of one of the hazardous materials, viz. nitrobenzene (NB) that causes Methemoglobinaemia. The synthesis protocol demonstrates that the bioreduction of chloroauric acid leads to the formation of Au-NPs within 10min, suggesting a higher reaction rate than any other chemical methods involved. The obtained Au-NPs have been characterized by UV-vis spectroscopy, X-ray diffraction, transmission electron microscopy, Energy-Dispersive X-ray Spectroscopy and Fourier Transform Infrared Spectroscopy. The electrochemical detection of NB has been investigated at the green synthesized Au-NPs modified glassy carbon electrode by using differential pulse voltammetry (DPV). The Au-NPs modified electrode exhibits excellent reduction ability toward NB compared to unmodified electrode. The developed NB sensor at Au-NPs modified electrode displays a wide linear response from 0.1 to 600μM with high sensitivity of 1.01μAμM(-1)cm(-2) and low limit of detection of 0.016μM. The modified electrode shows exceptional selectivity in the presence of ions, phenolic and biologically coactive compounds. In addition, the Au-NPs modified electrode exhibits an outstanding recovery results toward NB in various real water samples.