Perezone as corrosion inhibitor for AISI 1018 steel immersed in NaCl saturated with CO2

Experimental and theoretical evaluations on Oleuropein as a natural origin corrosion inhibitor for copper in acidic environment

Copper corrosion in acidic cleaning solutions is a major worry for heat exchangers. Corrosion inhibitors derived from natural sources might be a viable option. The isolation of Oleuropein compound from olive leaf and investigation of its anticorrosion potential for copper in 1.0 M H₂SO₄ solution are reported here. All experimental results from LC-MS, FT-IR, ¹H and ¹³C-NMR characterizations support the molecular structure of Oleuropein. Electrochemical and gravimetric tests were used to evaluate the corrosion inhibition capabilities of Oleuropein. According to polarization investigation, Oleuropein is a mixed-type inhibitor. Oleuropein's inhibitory efficacy increases with concentration, attaining an optimum value (98.92%) at 100 mg L^-1. At high temperatures, Oleuropein can be considered an efficient inhibitor. Thermodynamic variables for the activation operation and copper dissolution were computed and addressed as well. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) examinations revealed that Oleuropein produced an outer layer on the copper surface, shielding it from severe acid damage. Quantum chemical simulations were employed to propose molecular explanations for Oleuropein's inhibitory actions.

A Timeline of Perezone, the First Isolated Secondary Metabolite in the New World, Covering the Period from 1852 to 2020

This chapter covers a sesquiterpene quinone, commonly named perezone. This molecule is documented as the first secondary metabolite isolated in crystalline form in the New World in 1852. An introduction, with its structure, the IUPAC nomenclature, and the most recent physical and spectroscopic characterizations are firstly described initially. Alongside this, a timeline and scheme with summarized information of the history of this molecule is given including the "Códice Badiano de la Cruz, 1552, highlighting the year of its isolation culminating with information up to 2005. Subsequently, in a chronological order the most recent advances of the target molecule are included and organized in subsections covering the last 15-year period 2006-2020. Finally, recently submitted contributions from the laboratory of the authors are described. It is important to note that the details provided highlight the importance and relevance of perezone.

A Review of Recent Advances in the Inhibition of Sweet Corrosion

This review paper discusses the research work published in the last decade on the use of organic compounds and natural products as corrosion inhibitors for steel in CO₂ and CO₂ /H₂ S coexisting environments. The carbon and mild steel samples tested are mostly immersed in CO₂ -saturated NaCl/brine solutions or simulated oilfield waters. The influence of temperature, immersion time, CO₂ partial pressure, pre-corrosion, flow rate/rotation speed, and the synergistic effect of other compounds on the corrosion inhibition effectiveness of organic compounds and natural products is presented. Primarily, weight loss and electrochemical techniques were used to evaluate the corrosion inhibition effectiveness of these compounds.

Eco-friendly 2-Thiobarbituric acid as a corrosion inhibitor for API 5L X60 steel in simulated sweet oilfield environment: Electrochemical and surface analysis studies

The corrosion inhibition efficiency of 2-Thiobarbituric acid (TBA) for metal substrate (API X60 steel) in 3.5% NaCl solution saturated with CO₂ gas was probed using various techniques namely, LPR (linear polarization resistance), EIS (electrochemical impedance spectroscopy), and PDP (potentiodynamic polarization). The effects of TBA concentration (25–100 ppm), solution pH (4 and 6), temperature (25–80 °C), and immersion time (2–72 h) on the inhibition efficiency were examined. SEM (scanning electron microscopy) and XPS (X–ray photoelectron spectroscopy) were deployed to explore the corrosion retardation mechanism. TBA exhibited protection efficiencies exceeding 90% for all experimental conditions considered. The excellent anticorrosion performance by TBA was retained up to 72 hours of immersion time. PDP results exhibited that TBA behaved as a mixed type inhibitor. Results from kinetics and thermodynamics analyses indicate that TBA chemically adsorbed on the steel surface following Langmuir isotherm model. The composition of the adsorbed TBA film has been analyzed by XPS.