Enhanced visible-light photocatalytic performance of Fe3O4 nanopyramids for water splitting and dye degradation

Synergistic effects of covalently coupled eosin-Y with Ben-graphitic carbon nitride framework for improved photocatalytic activity in solar light-driven Biginelli product generation and NADH regeneration

Elevated global pollution level is the prime reason that contributes to the onset of various harmful health diseases. The products of Biginelli reaction are enormously used in the pharmaceutical industry as they have antiviral, antibacterial, and calcium channel modulation abilities. This work reports a novel eosin Y sensitized boron graphitic carbon nitride (EY-Ben-g-C3N4) as a photocatalyst that efficiently produced 3,4-dihydropyrimidine-2-(1H)-one by the Biginelli reaction of benzaldehyde, urea, and methyl acetoacetate. The photocatalyst EY-Ben-g-C3N4 showed a successful generation of 3,4-dihydropyrimidine-2-(1H)-one (Biginelli product) in good yield via photocatalysis which is an eco-friendly method and has facile operational process. In addition to the production of Biginelli products, the photocatalyst also showed a remarkable NADH regeneration of 81.18%. The incorporation of g-C3N4 with boron helps increase the surface area and the incorporation of eosin Y which is an inexpensive and non-toxic dye, and in Ben-g-C3N4, enhanced the light-harvesting capacity of the photocatalyst. The production of 3,4-dihydropyrimidine-2-(1H)-one and NADH by the EY-Ben-g-C3N4 photocatalyst is attributed to the requisite band gap, high molar absorbance, low rate of charge recombination, and increased capacity of the photocatalyst to harvest solar light energy.

Effect of iron nanoparticles on chromium adsorption in aqueous solution using magnetic biochar: A site energy distribution analysis

The effects of adding green-synthesized magnetic iron-containing nanoparticles (GSMFe) onto biochar in aqueous solution for the adsorptive removal of hexavalent chromium [Cr(VI)] were investigated in this study. Nanocomposites, denoted as green synthesis magnetic biochar (GSMB), were created using a green synthesis technique with white tea residue to introduce GSMFe into biochar. Six adsorbents, varying in GSMFe content, were tested for their effectiveness in eliminating Cr(VI), a globally significant hazardous heavy metal. The results demonstrated that incorporating GSMFe into biochar led to significant improvements in adsorption capacity and saturation magnetization. With an increasing amount of GSMFe, the maximum adsorption capacity increased from 2.47 mg/g (EWTWB) to 9.11 mg/g (GSMB4). The highest saturation magnetization was achieved at 13.4 Am2/kg at GSMB4. Similarly, surface areas rose up to 72.9 m2/g at GSMB3 but declined thereafter due to GSMFe aggregation and pore blockage. Sorption behavior for Cr(VI) was assessed using five isotherm models, with the Redlich-Peterson model showing the best fit. The analysis of approximate site energy distribution (SED) indicates that the incorporation of GSMFe enhances the frequency of the entire range of sorption energy sites, while the biochar matrix contributes to a slight increase in medium sorption energy sites within the GSMFe. Among the GSMBs, the difference were more pronounced at low-energy sites than at high-energy sites. At higher energy sites (27,500-40,000 J/mol), sorption site frequencies remained similar, regardless of GSMFe content and associated physicochemical properties. For sorption energy site values exceeding 17,500 J/mol (Cr(VI) concentration below 50 mg/L), GSMB2 is regarded as a more practical choice due to its relatively large area under the frequency distribution curve and commendable cost-effectiveness.

A green approach of biochar-supported magnetic nanocomposites from white tea waste: Production, characterization and plausible synthesis mechanisms

Green synthesized magnetic nanoparticles were impregnated into biochar matrix (EWTWB) to produce biochar-supported magnetic nanocomposite (GSMB). Instead of chemicals, organic matters in white tea waste extract were used as reductant, surfactant and functional capping materials. Magnetic biochar produced from traditional methods of pyrolysis (PMB) and co-precipitation (Co-PreMB) were prepared to compare their properties with GSMB. Xray Diffraction confirmed the main component of green synthesized particles is Fe₃O₄. When compared with PMB and Co-PreMB, the Fe₃O₄ produced by co-precipitation method has higher purity while the products from green synthesis method are complex and contain a small portion of other iron-containing compounds. As a consequence, Co-PreMB has higher saturation magnetisation value than GSMB, which are 31.3 and 11.5 Am²/kg, respectively. GSMB was also found to be less stable in acidic conditions (pH ≤ 4) than Co-PreMB. However, the SEM results exhibited that spherical magnetic nanoparticles (20-50 nm) were successfully formed and distributed on the surface of biochar via green synthesis method while serious aggregation happened on the surface of Co-PreMB. According to the result of BET, the surface area of GSMB increased dramatically from 0.2 m²/g to 59.7 m²/g. Fourier Transform Infrared spectroscopy and Xray photoelectron spectroscopy results showed the presence of rich oxygen-containing functional groups on the GSMB The high surface area and rich functional groups making the green synthesis method a very promising greener way to prepare magnetic biochar for the purpose of wastewater treatment.

Polyacrylonitrile support impregnated with amine-functionalized graphitic carbon nitride/magnetite composite nanofibers towards enhanced arsenic remediation: A mechanistic approach

Recently, novel composite materials are rapidly being explored for water treatment applications. However, their physicochemical behavior and mechanistic investigations are still a mystery. Therefore, our key prospect is to develop a highly stable mixed-matrix adsorbent system using polyacrylonitrile (PAN) support impregnated with amine-functionalized graphitic carbon nitride/magnetite (gCN-NH₂/Fe₃O₄) composite nanofibers (PAN/gCN-NH₂/Fe₃O₄: PCNFe) by simple electrospinning techniques. Various instrumental techniques were used to explore the structural, physicochemical, and mechanical behavior of the synthesized nanofiber. The developed PCNFe with a specific surface area of 39.0 m²/g was found to be non-aggregated and to have outstanding water dispersibility, abundant surface functionality, greater hydrophilicity, superior magnetic property, and higher thermal & mechanical characteristics making it favorable for rapid As removal. Based on the experimental findings from the batch study, 97.0 and 99.0 % of arsenite (As(III)) and arsenate (As(V)), respectively, could be adsorbed by utilizing0.02 g of adsorbent dosage within 60 min of contact time at pH 7 and 4, with an initial concentration of 10 mg/L. Adsorption of As(III) and As(V) followed the pseudo-second-order kinetic and Langmuir isotherm models with an sorption capacities of 32.26 and 33.22 mg/g, respectively, at ambient temperature. The adsorption was endothermic and spontaneous, in accordance with the thermodynamic study. Furthermore, the addition of co-anions in a competitive environment did not affect As adsorption except for PO₄^3-. Moreover, PCNFe preserves its adsorption efficiency above 80 % after five regeneration cycles. The combined results of FTIR and XPS after adsorption further support the adsorption mechanism. Also, the composite nanostructures retain their morphological and structural integrity after the adsorption process. The facile synthesis protocol, high As adsorption capacity, and enhanced mechanical integrity of PCNFe foreshadow its huge prospects for real wastewater treatment.

Sunlight-Driven Production of Reactive Oxygen Species from Natural Iron Minerals: Quantum Yield and Wavelength Dependence

Photochemically generated reactive oxygen species (ROS) play numerous key roles in earth's surface biogeochemical processes and pollutant dynamics. ROS production has historically been linked to the photosensitization of natural organic matter. Here, we report the photochemical ROS production from three naturally abundant iron minerals. All investigated iron minerals are photoactive toward sunlight irradiation, with photogenerated currents linearly correlated with incident light intensity. Hydroxyl radicals (^•OH) and hydrogen peroxide (H₂O₂) are identified as the major ROS species, with apparent quantum yields ranging from 1.4 × 10^-8 to 3.9 × 10^-8 and 5.8 × 10^-8 to 2.5 × 10^-6, respectively. Photochemical ROS production exhibits high wavelength dependence, for instance, the ^•OH quantum yield decreases with the increase of light wavelength from 375 to 425 nm, and above 425 nm it sharply decreases to zero. The temperature shows a positive impact on ^•OH production, with apparent activation energies ranging from 8.0 to 17.8 kJ/mol. Interestingly, natural iron minerals with impurities exhibit higher ROS production than their pure crystal counterparts. Compared with organic photosensitizers, iron minerals exhibit higher wavelength dependence, higher selectivity, lower efficiency, and long-term stability in photochemical ROS production. Our study highlights natural inorganic iron mineral photochemistry as a ubiquitous yet previously overlooked source of ROS.

Conversion and reducing agent effect on zero valent iron into Fe3O4 for photocatalytic degradation under UV light irradiation

Conversion and reducing agent (NaBH₄) effect on zero valent iron into Fe₃O₄ nanoparticles with diverse molar ratios of reducing agent was produced through chemical reduction technique. The structural, optical, vibrational analyses were executed via XRD, UV-Vis, Raman, and FT-IR analysis. The crystallite size obtained were 35 nm, 27 nm, and 18 nm for Fe:NaBH₄ (1:1), Fe:NaBH₄ (1:2) and Fe:NaBH₄ (1:3). The morphology of the Fe:NaBH₄ (1:1) was not in good orientation with higher dimensions. As explored in Fe:NaBH₄ (1:2) and (1:3) samples, there is a proper growth of nanoneedles and nanosheets formation. This was due to the addition of reducing agent which greatly helped in enhancement of morphology. The prepared photocatalysts were tested to reduce Malachite Green (MG) under UV illumination. The pure dye solution obtained 57% efficiency after irradiation. Fe:NaBH₄ (1:3) photocatalyst achieved 97% efficiency on reducing pollutants. The rate constant values calculated was 0.007, 0.013, 0.02 and 0.03 min^-1 for pure, Fe: NaBH₄ (1:1), Fe: NaBH₄ (1:2) and Fe: NaBH₄ (1:3) assisted MG samples. The as prepared photocatalyst is more potential one on removal of toxic pollutants from wastewater which is due to the better enhancement of nanoneedles and nanosheets oriented by the effect of reducing agent. The advantage of Fe₃O₄ nanoparticles for wastewater is that the removal of these nanoparticles can be ease with magnetic separation methods. On considering the advantage of removing of photocatalyst and efficiency, this prepared product is suitable one for wastewater remediation process in future days.

Performance and potential mechanism of transformation of polycyclic aromatic hydrocarbons (PAHs) on various iron oxides

The abiotic transformation of polycyclic aromatic hydrocarbons (PAHs) is significantly impacted by soil components, especially inorganic redox species like iron oxides. In this study, the catalytic activities of three types of iron oxides in PAHs degradation without light irradiation were evaluated using a combination of experimental techniques. The results showed that α-Fe₂O₃ possessed the highest transformation rate for anthracene (ANT), with a reaction rate constant (K_obs) up to 0.28 d^-1, followed by Fe₃O₄ (K_obs = 0.06 d^-1) and α-FeOOH (K_obs = 0.06 d^-1). X-ray photoelectron spectroscopy (XPS) characterization suggested that α-Fe₂O₃ had the highest oxygen vacancy concentration, which was conducive to the adsorption of O₂ by α-Fe₂O₃, providing sufficient adsorbed oxygen species. Oxygen vacancy contributed to the exposure of Fe(III), and accordingly, more active sites were created that were responsible for ANT degradation. According to these results, two possible pathways for the degradation of PAHs on iron oxides can be concluded: (1) direct oxidation by Fe(III) and (2) oxidation by the O₂^•- generated onto oxygen vacancies. This study provides significant insights into the environmental fate of PAHs on iron oxides, and raises the possibility that iron oxides may be used as catalytic materials in the remediation PAHs-contaminated soil.

Multiwavelength Phototactic Micromotor with Controllable Swarming Motion for "Chemistry-on-the-Fly"

Artificial nano/micromotors that represent the next-generation automotive microdevices hold considerable promise in various potential applications. However, it is a great challenge to design light-powered micro/nanomotors with effective propulsion that can fulfill diverse tasks. Herein, a multilight-responsive micromotor is fabricated by in situ precipitation of photothermal Fe₃O₄ nanoparticles (NPs) onto different microparticles. The composites exhibit phototactic swarming movement by irradiation at 320-550 nm, which can be reversibly and remotely manipulated by irradiation position, "on/off" switch, and light intensity. The micromotor made of Fe₃O₄@poly(glycidyl methacrylate)/polystyrene (Fe₃O₄@PGS) core-shell particles presents a propulsion speed as high as 270 μm/s under ultraviolet (UV) irradiation. Using an array of experimental methods and numerical simulations, thermal convection mechanism is proposed for the propulsion. Namely, under light irradiation, the photogenerated heat on Fe₃O₄ NPs decreases the density of the irradiated spot, leading to the swarming motion of the composite particles propelled by a "hydrodynamic drag" toward the light spot. Then, Fe₃O₄@PGS is exploited as a platform for performing "chemistry-on-the-fly" using both the catalytic efficiency of Fe₃O₄ NPs and an immobilized enzyme (lipase). It is found that the propulsion increases the catalytic efficiency of Fe₃O₄ NPs for rhodamine B degradation by over 10 times under sunlight. Moreover, it is proved to accelerate the enzymatic reactions of lipase on Fe₃O₄@PGS in both aqueous and organic systems by more than 50%. Such a multiwavelength phototactic swimmer paves the way to the design of advanced micromotors for various applications, such as drug delivery, microsurgery, and sensing.