The effects of different prosthetic materials on the formation of collagen types in incisional hernia

Different cellular and immunohistochemical abdominal wall cicatrization parameters evaluation in comparison with sublay, onlay, and ipom technique in an experimental rat model

PURPOSE

Incisional hernia (IH) occurs when there is a partial or complete solution of continuity of a fascia previously incised. Systematic reviews demonstrate that surgical treatment of IHs with the use of meshes are approximately 16%. Meta-analyses have demonstrated the superiority of mesh placement using sublay technique, but without a pathophysiological explanation. Thus, we aim to evaluate the different techniques of mesh positioning in an experimental model.

METHODS

Fifty rats were distributed into five groups; control; simulation (SM)-submitted to laparotomy only; onlay-the mesh was positioned in onlay fashion; retromuscular (SL)-the mesh was positioned in a sublay fashion; intraperitoneal (IPOM)-positioning of the mesh adjacent to the transversalis fascia, inside the cavity. After 60 days, adhesions, tensiometry, histology, and immunohistochemistry were addressed.

RESULTS

The IPOM group had the most adhesions, together with the SL group, with significantly relevant results. The SL group had higher values of tensiometric evaluation, while the IPOM group had the lowest mean in the tensiometry evaluation, being even lower than the SM group. Regarding histological and immunohistochemical findings, the SL group had a higher pixel number count compared to the groups, with statistical significance, in addition to higher expression of polymorphonuclear infiltrate and CD68 markers.

CONCLUSION

The mesh positioning in sublay compartment is associated with the development of more pronounce minimum tensile force required for detaching the surrounding abdominal wall tissues it was incorporated. The intensity of these findings correlates to the different histological and immunohistochemical profiles observed following each repair, since SL group was characterized by a higher proportion of collagen, inflammatory, and reparative elements. Characterizing these pro-healing elements and its counterparts will allow the development of new therapeutic tools which could be added to the still far-from-ideal current therapeutic options for IH treatment.

Analysis of tissue inflammatory response, fibroplasia, and foreign body reaction between the polyglactin suture of abdominal aponeurosis in rats and the intraperitoneal implant of polypropylene, polypropylene/polyglecaprone and polyester/porcine collagen meshes

Purpose

To compare tissue inflammatory response, foreign body reaction, fibroplasia, and proportion of type I/III collagen between closure of abdominal wall aponeurosis using polyglactin suture and intraperitoneal implant of polypropylene, polypropylene/polyglecaprone, and polyester/porcine collagen meshes to repair defects in the abdominal wall of rats.

Methods

Forty Wistar rats were placed in four groups, ten animals each, for the intraperitoneal implant of polypropylene, polypropylene/polyglecaprone, and polyester/porcine collagen meshes or suture with polyglactin (sham) after creation of defect in the abdominal wall. Twenty-one days later, histological analysis was performed after staining with hematoxylin-eosin and picrosirius red.

Results

The groups with meshes had a higher inflammation score (p < 0.05) and higher number of gigantocytes (p < 0.05) than the sham group, which had a better fibroplasia with a higher proportion of type I/III collagen than the tissue separating meshes (p < 0.05). There were no statistically significant differences between the three groups with meshes.

Conclusions

The intraperitoneal implant of polypropylene/polyglecaprone and polyester/porcine collagen meshes determined a more intense tissue inflammatory response with exuberant foreign body reaction, immature fibroplasia and low tissue proportion of type I/III collagen compared to suture with polyglactin of abdominal aponeurosis. However, there were no significant differences in relation to the polypropylene mesh group.

Sublay repair results in superior mesh incorporation and histological fibrogenesis in comparison to onlay and primary suture in an experimental rat model

PURPOSE

To compare adhesion scores, repair strength and histological findings among sublay, onlay and primary repair incisional hernioplasty techniques. Surgical repairs were employed directly on healthy animals, without previous hernia induction, to avoid confounding factors related to hernia development.

METHODS

Forty Wistar rats were divided into four groups, control, simulation, onlay and sublay. After 42 days, adhesion intensity, tensile strength of the abdominal wall and anatomopathological histological substrate were compared.

RESULTS

SL group presented greater adhesion scores (p < 0.0001), higher tensiometric (p < 0.0001), and was characterized by more histiocytes, mononuclear cells, macrovacuolar granulomas and type I collagen on histological analysis. Pearson correlation between adhesions and tensiometry, and between tensiometry and neocollagenization showed a strong positive association (r = 0.8905 and 0.6757, respectively in SL group, p < 0.05).

CONCLUSION

Mesh positioning in sublay compartment was followed by increased adhesion development and provides a stronger mesh-tissue attachment, in addition, resulted in a different histological profile of the inflammation/repair substrate. The intensity of these findings was directly correlated, suggesting they could be the result of a common biological phenomenon. Our findings indicate that mesh placement following the retromuscular technique generates a superior repair response, and give clues to a better understanding of the superiority of sublay repair in achieving lower recurrence rates. Characterization of the cellular and molecular elements responsible for the superiority of this technique is in our view an essential prerequisite aiming for improvements in the therapeutic options for the treatment of this disease.

Comparison of partially-absorbable lightweight mesh with heavyweight mesh for inguinal hernia repair: multicenter randomized study

Purpose

Prosthetic mesh is widely used for inguinal hernia repair; however, pain and stiffness can develop. This study was a prospective, multicenter, single-blind, randomized trial to assess postoperative pain and quality of life according to mesh type after inguinal hernia repair.

Methods

Forty-seven patients who underwent Lichtenstein repair for unilateral inguinal hernia with prosthetic mesh were enrolled and randomly allocated to the partially-absorbable lightweight mesh (LW group, n = 24) or heavyweight mesh group (HW group, n = 23). Data were collected using a visual analogue scale (VAS), Carolinas Comfort Scale (CCS), and Activities Assessment Scale (AAS) at screening and postoperative day 1, 7, 90, and 120; foreign body sensation, sense of stiffness, and sense of pull during activity were also evaluated.

Results

There were no significant differences in patients' demographics and clinical characteristics between groups. The VAS at day 90 was significantly lower in the LW group (0.46 ± 0.78 vs. 0.96 ± 0.82, P = 0.027). The CCS and AAS were significantly lower in the LW group at day 1 (51.33 ± 20.29 vs. 64.65 ± 22.64, P = 0.047 and 39.83 ± 9.88 vs. 46.43 ± 7.82, P = 0.015, respectively). Foreign body sensation was significantly lower in the LW group at day 120 (4.2% vs. 30.4 %, P = 0.023), as was sense of stiffness (P = 0.023). The sense of pull during activity was lower in the LW group at day 90 and 120 (P = 0.012 and P = 0.022, respectively). There was no recurrence or serious complication during follow-up.

Conclusion

Partially-absorbable lightweight prosthetic mesh can be used for inguinal hernia repair safely and improve functional outcomes and quality of life after surgery.

Repair of primary and incisional hernias using composite mesh fixed with absorbable tackers: preliminary experience of a laparoscopic approach with a newly designed mesh in 29 cases

Outcome of primary and incisional hernia repair is still affected by clinical complications in terms of recurrences, pain and discomfort. Factors like surgical approach, prosthesis characteristics and method of fixation might influence the outcome. We evaluated in a prospective observational study a cohort population which underwent primary and incisional laparoscopic hernia repair, with the use of a composite mesh in polypropylene fixed with absorbable devices. We focused on assessing the feasibility and safety of these procedures; they were always performed by an experienced laparoscopic surgeon, analyzing data from our patients through the EuraHS registry. Seventy nine procedures of primary and incisional hernia repair were performed from July 2013 to November 2015 at Santa Maria Regina degli Angeli Hospital in Adria (RO). All cases have been registered at the EuraHS registry ( http://www.eurahs.eu ); among them, we analyzed 29 procedures performed using a new composite polypropylene mesh (CMC, Clear Composite Mesh, DIPROMED srl San Mauro Torinese, Turin, Italy), fixed with absorbable tackers (ETHICON, Ethicon LLC Guaynabo, Puerto Rico 00969). We performed 23 incisional hernia repairs, 4 primary hernia repairs (1 umbilical, 2 epigastric and 1 lumbar hernia) and 2 parastomal hernia repairs. The median operation time was 65.1 min for elective and 81.4 min for urgent procedures (three cases). We had two post-operative complications (6.89%), one case of bleeding and another case of prolonged ileus successfully treated with conservative management. We had no recurrences at follow-up. According to QoL, at 12 months patients do not complain about any pain or discomfort for esthetic result. Laparoscopic treatment of primary and incisional hernia with the use of composite mesh in polypropylene fixed with absorbable devices is feasible and safe.

Mesh implants: An overview of crucial mesh parameters

Hernia repair is one of the most frequently performed surgical interventions that use mesh implants. This article evaluates crucial mesh parameters to facilitate selection of the most appropriate mesh implant, considering raw materials, mesh composition, structure parameters and mechanical parameters. A literature review was performed using the PubMed database. The most important mesh parameters in the selection of a mesh implant are the raw material, structural parameters and mechanical parameters, which should match the physiological conditions. The structural parameters, especially the porosity, are the most important predictors of the biocompatibility performance of synthetic meshes. Meshes with large pores exhibit less inflammatory infiltrate, connective tissue and scar bridging, which allows increased soft tissue ingrowth. The raw material and combination of raw materials of the used mesh, including potential coatings and textile design, strongly impact the inflammatory reaction to the mesh. Synthetic meshes made from innovative polymers combined with surface coating have been demonstrated to exhibit advantageous behavior in specialized fields. Monofilament, large-pore synthetic meshes exhibit advantages. The value of mesh classification based on mesh weight seems to be overestimated. Mechanical properties of meshes, such as anisotropy/isotropy, elasticity and tensile strength, are crucial parameters for predicting mesh performance after implantation.

Chitooligosaccharide Inhibits Scar Formation and Enhances Functional Recovery in a Mouse Model of Sciatic Nerve Injury

Chitooligosaccharide (COS) has been shown to induce fibroblast apoptosis, indicating that it could be used as a material to inhibit scar formation. In the present study, we used a mouse model of sciatic nerve injury (SNI) to determine the role of COS in scar inhibition and functional recovery. The animals were divided into three groups: SNI, SNI + vehicle, and SNI + COS group. We performed a series of functional and histological examinations at ctrl, 0 min, 14 days, and 42 days, including behavioral recovery, percentage of regenerating axons, degree of scar formation, vascular changes, type I and type III collagen ratio, and percentage of demyelinated axons. The SNI + COS group exhibited better recovery of sensory and motor function and less scar formation. Two-photon microscopy showed that the percentage of regenerating axons was highest in the SNI + COS group at 14 and 42 days. Our results suggested that COS can inhibit scar formation and enhance functional recovery by inducing fibroblast death, altering the proportion of different vascular diameters, changing the ratio of type I/type III collagen, and reducing the percentage of demyelinated axons. COS might be a useful drug in the treatment of SNI to reduce scar formation, but additional research is required to clarify the relevant molecular pathways.

Early and late postoperative inflammatory and collagen deposition responses in three different meshes: an experimental study in rats

PURPOSE

Although meshes reduce abdominal hernia recurrence, they increase the risk of inflammatory complications. This study aimed to compare the early and late postoperative inflammation and collagen deposition responses induced by three meshes.

METHODS

Rats were allocated into three groups. In group I, a polypropylene (PP) mesh was implanted in the abdominal wall. In groups II and III, PP + polyglactin (PP + PG) and PP + titanium (PP + TI) meshes were employed, respectively. On the seventh (7th) postoperative day, collagen deposition and inflammation were evaluated, and immunohistochemistry was performed on abdominal wall biopsies. These data were compared with those obtained on the fortieth (40th) postoperative day in a previous study.

RESULTS

The early inflammatory responses were the same in all groups. With time, it decreased in group I (p = 0.047) and increased in group II (p = 0.003). Group I exhibited early elevated VEGF (p < 0.001), COX2 (p < 0.001), and collagen (p = 0.023) levels, and group II exhibited the most severe inflammatory tissue response. On the 40th postoperative day, the VEGF (p < 0.001) and collagen (p < 0.005) were reduced as compared with the 7th postoperative day in all groups.

CONCLUSIONS

Belatedly, the inflammatory reaction decreased in PP mesh group and increased in PP + PG mesh group. The PP mesh induced early great elevations in VEGF, COX2 and collagen levels, whereas the PP + PG mesh caused severe tissue inflammation with small elevation in these levels. PP + TI mesh induced inflammatory response levels between the others. In conclusion, the inflammatory response depends on the mesh density and also the mesh material with clinical implications.

Biocompatibility and tissue integration of a novel shape memory surgical mesh for ventral hernia: in vivo animal studies

Approximately 400,000 ventral hernia repair surgeries are performed each year in the United States. Many of these procedures are performed using laparoscopic minimally invasive techniques and employ the use of surgical mesh. The use of surgical mesh has been shown to reduce recurrence rates compared to standard suture repairs. The placement of surgical mesh in a ventral hernia repair procedure can be challenging, and may even complicate the procedure. Others have attempted to provide commercial solutions to the problems of mesh placement, but these have not been well accepted by the clinical community. In this article, two versions of shape memory polymer (SMP)-modified surgical mesh, and unmodified surgical mesh, were compared by performing laparoscopic manipulation in an acute porcine model. Also, SMP-integrated polyester surgical meshes were implanted in four rats for 30-33 days to evaluate chronic biocompatibility and capacity for tissue integration. Porcine results show that the modified mesh provides a controlled, temperature-activated, automated deployment when compared to an unmodified mesh. In rats, results indicate that implanted SMP-modified meshes exhibit exceptional biocompatibility and excellent integration with surrounding tissue with no noticeable differences from the unmodified counterpart. This article provides further evidence that an SMP-modified surgical mesh promises reduction in surgical placement time and that such a mesh is not substantially different from unmodified meshes in chronic biocompatibility.