In vivo evaluation of laser fluorescence performance using different cut-off limits for occlusal caries detection

Laser fluorescence assessment of dental caries arrest with two silver fluoride agents in patients with special needs- a preliminary report

PURPOSE

While silver diamine fluoride has been used extensively for caries arrest and desensitising, silver fluoride (AgF) at neutral pH may also have value as a minimally invasive dental caries treatment. This study explored the effectiveness of two AgF products (AgF/KI and AgF/SnF2) when used in adult patients with special needs (SN) who had high caries risk and salivary gland hypofunction.

METHODS

This split-mouth clinical study, over two appointments 3-months apart, compared the impact of a single application of AgF/KI (Riva Star Aqua, SDI) and AgF/SnF2 (Creighton Dental CSDS, Whiteley) on matched carious lesions in the same arch, by clinical visual-tactile (cVT) assessment of caries status and laser fluorescence (LF, DIAGNOdent) evaluation of bacterial load in the lesions, using repeated measures analysis.

RESULTS

Twelve participants were recruited in the study. A total of 56 teeth (28 pairs) were included. Both AgF products gave a significant decrease in caries activity as measured by cVT (P < 0.0001) and LF (P = 0.0027). There were no statistically significant differences between the two AgF treatments, with response rates for improvements in active lesions of 92% in the AgF/KI arm, and 96% in the AgF/SnF2 arm. There was no effect of tooth type, lesion type, arch type, plaque metabolism and plaque area at the site level on outcomes, nor was there a clustering effect of sites in a patient level analysis. Overall, LF was superior to cVT for detecting lesions that still progressed despite treatment (P = 0.0027).

CONCLUSION

A single application of AgF/KI or AgF/SnF2 has high predictability (over 90%) for achieving arrest in active caries lesions in adult patients with SN and high caries risk. Clinical assessment should use visual-tactile examination combined with LF readings to detect lesions that are still progressing and that require additional treatments. Future studies should compare these AgF modalities with SDF and explore factors such as time between applications and the need for repeated applications.

TRIAL REGISTRATION

The study was registered with the Australian Clinical Trials Registry (ACTRN12621001139864p) on 23/08/2021.

Clinical Performance of Diagnostic Methods in Third Molar Teeth with Early Occlusal Caries

The aim of this study was to compare the diagnostic performance of clinical visual examination (ICDAS II), digital periapical radiography (PR), near infrared light transillumination (NIR-LT), and laser fluorescence (LF) to microcomputed tomography (Micro-CT) which is the reference standard for the detection of non-cavitated occlusal enamel and dentin caries in third molar teeth. Potential participants were consecutively recruited. In this prospective study, 101 third molars of 101 patients were examined; the molars had non-cavitated occlusal caries which required extraction. ICDAS II, PR, NIR-LT and LF examinations were carried out by two blinded examiners. Reference standard was determined by micro-CT imaging seven days after extraction. Accuracy rate, sensitivity, specificity, predictive values and areas under receiver operating characteristic (ROC) curves (Az) were statistically analyzed. Nonparametric variables were subjected to the Kruskal−Wallis Test. Significance level was set as p < 0.05. NIR-LT had the highest sensitivity (99.67−99.67%) and accuracy (78.22−77.23%) for the determination of occlusal enamel caries according to examiners 1 and 2, respectively. LF method had the highest sensitivity (70.83−54.17%) and accuracy (66.34−59.41%) for determining occlusal dentin caries according to examiners 1 and 2, respectively. The ROC curve (Az) value ranged between 0.524 and 0.726 for the different methods tested. Most effective methods for the diagnosis of occlusal enamel and dentin caries were determined to be NIR-LT and LF pen methods, respectively. The present prospective clinical study showed that NIR-LT and LF-Pen were a reliable modality for the detection of occlusal enamel and dentin caries without ionizing radiation.

Long-term evaluation of early-enamel lesions treated with novel experimental tricalcium silicate paste: A 2-year randomized clinical trial

OBJECTIVE

The aim of the current study is to evaluate the remineralization potential of experimental tricalcium silicate (TCS) paste in comparison with more popular remineralizing agents like silver diamine fluoride potassium iodide (SDF-KI) and casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on early enamel lesions.

MATERIALS AND METHODS

Forty-five patients in the age range of 15-50 years had early enamel lesions on the buccal surface of molar teeth. The patients were randomly divided into three treatment groups (SDF-KI, CPP-ACP, and TCS group) with 15 patients per group. Lesions were evaluated clinically by DIAGNOdent pen immediately and after 3,6,12, and 24 months of treatment.

RESULTS

The study was completed with 45 patients and 92 teeth. Twice-daily application of CPP-ACP and TCS paste showed a significant remineralization effect on early enamel lesions after 24 months (p < 0.001). Also, annual application of SDF-KI showed a significant remineralization effect after 24 months (p < 0.001). There was a significant difference between (SDF-KI and CPP-ACP) and (SDF-KI and TCS) at the different follow-up periods 3,6,12, and 24 months (p < 0.001). Meanwhile, there was no significant difference between CPP-ACP and TCS at the mentioned follow-up periods (p > 0.05).

CONCLUSION

TCS showed potential remineralization for early enamel lesions.

CLINICAL RELEVANCE

Experimental TCS is a promising remineralizing agent for management of early enamel lesions.

Effectiveness of Visual-Tactile Examination and DIAGNOdent Pen in Detecting Early Enamel Caries and Its Remineralisation: An In Vitro Study

Background

The caries preventive effect of Colgate Duraphat® and GC Tooth Mousse Plus® has been widely studied, but the remineralisation potential of initial occlusal caries using these two remineralisation materials remains unclear.

Aim

This study is aimed at evaluating and comparing the remineralisation of early enamel caries on the occlusal surface of permanent posterior teeth using ICDAS II caries scoring system and DIAGNOdent Pen (DDPen) after remineralisation with Colgate Duraphat® and GC Tooth Mousse Plus®.

Materials and Methods

Extracted posterior teeth (N = 120) with incipient occlusal caries were included in this study. The occlusal surface of each tooth was scored using DDPen and ICDAS II scoring before remineralisation. Then, remineralisation of the teeth of the experimental group was carried out using either CPP-ACP-F or fluoride varnish. After the remineralisation procedures, the occlusal surface of each tooth was again scored using DDPen and ICDAS II scoring. The teeth were then fixed in dental stone blocks and sectioned longitudinally for histological examination using a stereomicroscope. Statistical analysis was performed to calculate the sensitivity and specificity of DDPen and ICDAS II to detect remineralisation and compare with the gold standard histological examination.

Results

According to ICDAS-II scores, a significant difference was noted in GC Tooth Mousse Plus® and Duraphat® study samples, whereas the difference between the pre-and post-remineralisation of the control group was not significant. According to the DDPen score criteria, a statistically significant difference was noted among all study groups; however, a greater significance level was noted in the GC Tooth Mousse Plus® and Duraphat® study samples compared with the control group. The Spearman's rank correlation of ICDAS-II and DDPen with Downer's histological score (gold standard) revealed a higher association of DDPen score (.738) as compared to ICDAS-II scores (.430).

Conclusion

The study concluded that both ICDAS II and DDPen could detect remineralisation of early enamel occlusal caries. DDPen was more sensitive than ICDAS-II to detect remineralisation compared with the Downers histological scores.

In vivo effectiveness of visual inspection and laser fluorescence in the diagnosis of early pit-and-fissure carious lesions: A cross-sectional study in a group of Romanian children

General practitioners are still facing great challenges in the management of occlusal caries. Therefore, the development of better diagnostic protocols and assessment of caries activity might improve the results of nonoperative treatment. This study aimed to evaluate the effectiveness of visual inspection based on ICDAS-II (International Caries Detection and Assessment System) and DiagnoDent pen in the detection of pit-and-fissure early lesions in young permanent molars. The evaluation of 237 occlusal surfaces and caries risk assessment were performed in 96 children aged 7 to 15 years. The presence of pit-and-fissure noncavitated lesions was recorded using ICDAS-II scoring system and laser fluorescence. Statistical analysis was performed using McNemar test, with a level of significance of P < .05. The caries risk was measured for all participants. In 109 occlusal surfaces both methods identified enamel changes (46%) and in 62 cases both methods excluded the carious lesion (26.2%). The statistical analysis showed a significant moderate agreement between ICDAS-II code and DiagnoDent pen measurements (McNemar chi-squared statistic 9.5, P = .002 and Cohen kappa coefficient = 0.427). The majority of children (69.8%) had moderate caries risk and the most frequent risk factors recorded were sugar intake between meals, lack of regular dental control and poor oral hygiene. We concluded that ICDAS-II is a valuable and reliable diagnostic tool for early pit-and-fissure lesions and could be used alone during dental examination in children. The evaluation of caries risk should become clinical routine, as parameters belonging to high risk were frequently recorded in our study group.

Fluorescence devices for the detection of dental caries

BACKGROUND

Caries is one of the most prevalent and preventable conditions worldwide. If identified early enough then non-invasive techniques can be applied, and therefore this review focusses on early caries involving the enamel surface of the tooth. The cornerstone of caries detection is a visual and tactile dental examination, however alternative methods of detection are available, and these include fluorescence-based devices. There are three categories of fluorescence-based device each primarily defined by the different wavelengths they exploit; we have labelled these groups as red, blue, and green fluorescence. These devices could support the visual examination for the detection and diagnosis of caries at an early stage of decay.

OBJECTIVES

Our primary objectives were to estimate the diagnostic test accuracy of fluorescence-based devices for the detection and diagnosis of enamel caries in children or adults. We planned to investigate the following potential sources of heterogeneity: tooth surface (occlusal, proximal, smooth surface or adjacent to a restoration); single point measurement devices versus imaging or surface assessment devices; and the prevalence of more severe disease in each study sample, at the level of caries into dentine.

SEARCH METHODS

Cochrane Oral Health's Information Specialist undertook a search of the following databases: MEDLINE Ovid (1946 to 30 May 2019); Embase Ovid (1980 to 30 May 2019); US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov, to 30 May 2019); and the World Health Organization International Clinical Trials Registry Platform (to 30 May 2019). We studied reference lists as well as published systematic review articles.

SELECTION CRITERIA

We included diagnostic accuracy study designs that compared a fluorescence-based device with a reference standard. This included prospective studies that evaluated the diagnostic accuracy of single index tests and studies that directly compared two or more index tests. Studies that explicitly recruited participants with caries into dentine or frank cavitation were excluded.

DATA COLLECTION AND ANALYSIS

Two review authors extracted data independently using a piloted study data extraction form based on the Quality Assessment of Diagnostic Accuracy Studies 2 (QUADAS-2). Sensitivity and specificity with 95% confidence intervals (CIs) were reported for each study. This information has been displayed as coupled forest plots and summary receiver operating characteristic (SROC) plots, displaying the sensitivity-specificity points for each study. We estimated diagnostic accuracy using hierarchical summary receiver operating characteristic (HSROC) methods. We reported sensitivities at fixed values of specificity (median 0.78, upper quartile 0.90).

MAIN RESULTS

We included a total of 133 studies, 55 did not report data in the 2 x 2 format and could not be included in the meta-analysis. 79 studies which provided 114 datasets and evaluated 21,283 tooth surfaces were included in the meta-analysis. There was a high risk of bias for the participant selection domain. The index test, reference standard, and flow and timing domains all showed a high proportion of studies to be at low risk of bias. Concerns regarding the applicability of the evidence were high or unclear for all domains, the highest proportion being seen in participant selection. Selective participant recruitment, poorly defined diagnostic thresholds, and in vitro studies being non-generalisable to the clinical scenario of a routine dental examination were the main reasons for these findings. The dominance of in vitro studies also means that the information on how the results of these devices are used to support diagnosis, as opposed to pure detection, was extremely limited. There was substantial variability in the results which could not be explained by the different devices or dentition or other sources of heterogeneity that we investigated. The diagnostic odds ratio (DOR) was 14.12 (95% CI 11.17 to 17.84). The estimated sensitivity, at a fixed median specificity of 0.78, was 0.70 (95% CI 0.64 to 0.75). In a hypothetical cohort of 1000 tooth sites or surfaces, with a prevalence of enamel caries of 57%, obtained from the included studies, the estimated sensitivity of 0.70 and specificity of 0.78 would result in 171 missed tooth sites or surfaces with enamel caries (false negatives) and 95 incorrectly classed as having early caries (false positives). We used meta-regression to compare the accuracy of the different devices for red fluorescence (84 datasets, 14,514 tooth sites), blue fluorescence (21 datasets, 3429 tooth sites), and green fluorescence (9 datasets, 3340 tooth sites) devices. Initially, we allowed threshold, shape, and accuracy to vary according to device type by including covariates in the model. Allowing consistency of shape, removal of the covariates for accuracy had only a negligible effect (Chi2 = 3.91, degrees of freedom (df) = 2, P = 0.14). Despite the relatively large volume of evidence we rated the certainty of the evidence as low, downgraded two levels in total, for risk of bias due to limitations in the design and conduct of the included studies, indirectness arising from the high number of in vitro studies, and inconsistency due to the substantial variability of results.

AUTHORS' CONCLUSIONS

There is considerable variation in the performance of these fluorescence-based devices that could not be explained by the different wavelengths of the devices assessed, participant, or study characteristics. Blue and green fluorescence-based devices appeared to outperform red fluorescence-based devices but this difference was not supported by the results of a formal statistical comparison. The evidence base was considerable, but we were only able to include 79 studies out of 133 in the meta-analysis as estimates of sensitivity or specificity values or both could not be extracted or derived. In terms of applicability, any future studies should be carried out in a clinical setting, where difficulties of caries assessment within the oral cavity include plaque, staining, and restorations. Other considerations include the potential of fluorescence devices to be used in combination with other technologies and comparative diagnostic accuracy studies.

Development of a Fluorescence-Based Caries Scoring System for an Intraoral Scanner: An in vitro Study

OBJECTIVES

To develop an automated fluorescence-based caries scoring system for an intraoral scanner and totest the performance of the system compared to state-of-the-art methods.

METHODS

Seventy-three permanent posterior teeth were scanned with a three-dimensional (3D) intraoral scanner prototype which emitted light at 415 nm. An overlay representing the fluorescence signal from the tissue was mapped onto 3D models of the teeth. Multiple examination sites (n = 139) on the occlusal surfaces were chosen, and their red and green fluorescence signal components were extracted. These components were used to calculate 4 mathematical functions upon which a caries scoring system for the scanner prototype could be based. Visual-tactile (International Caries Detection and Assessment System, ICDAS), radiographic (ICDAS), and histological assessments were conducted on the same examination sites.

RESULTS

Most index tests showed significant correlation with histology. The strongest correlation was observed for the visual-tactile examination (rs = 0.80) followed by the scanner supported by the caries classification function that quantifies the overall fluorescence compared to sound surfaces (rs = 0.78). Additionally, this function resulted in the highest intra-examiner reliability (κ = 0.964), and the highest sum of sensitivity (SE) and specificity (SP) (sum SE-SP: 1.60-1.84) at the 2 histological levels where the comparison with visual-tactile assessment was possible (κ = 0.886, sum SE-SP = 1.57-1.81) and at the 3 out of 4 histological levels where the comparison with radiographic assessment was possible (κ = 0.911, sum SE-SP = 1.37-1.78); the only exception was for the lesions in the outer third of dentin, where the radiographic assessment showed the highest sum SE-SP (1.78).

CONCLUSION

A fluorescence-based caries scoring system was developed for the intraoral scanner showing promising performance compared to state-of-the-art caries detection methods. The intraoral scanner accompanied by an automated caries scoring system may improve objective caries detection and increase the efficiency and effectiveness of oral examinations. Furthermore, this device has the potential to support reliable monitoring of early caries lesions.

Treatment of various degrees of white spot lesions using resin infiltration-in vitro study

BACKGROUND

This study was conducted to evaluate the efficiency of resin infiltration to improve the color of white spot lesions (WSLs) and to estimate the effect of different numbers of etching and resin infiltrant applications on the color change of WSLs with various depths. Ninety-six sound extracted premolars were subjected to acid attack inducing different depths of WSLs. Using a DIAGNOdent, teeth were divided into four main groups according to the depth of the WSLs: shallow enamel, deep enamel, shallow dentine, and deep dentine without cavitation. Then each of the main groups was subdivided into four groups: six teeth each with different protocols of resin infiltration as follows: 1 etching + 1 infiltrant application (EA), 1 etching + 2 infiltrant applications (EAA), 2 etchings + 1 infiltrant application (EEA), 2 etchings + 2 infiltrant applications (EEAA). Spectrophotometric analysis was measured at baseline (T0), after inducing the WSLs (T1), and following resin infiltration application (T2) for each group.

RESULTS

In shallow enamel, EA produced the least mean color difference (1.62 ± 0.85), with high significant difference (P < 0.001), when compared with the clinically detectable threshold (ΔE = 3.7). While in deep enamel, EAA showed the least mean color change (1.95 ± 0.4), with P < 0.001 when compared with the critical value. Also, in shallow dentine, the least mean change was noticed with EAA (3.0 ± 0.45), with P < 0.001 when compared with the clinical color detection threshold. Furthermore, in deep dentine, EAA had the least mean difference (3.76 ± 0.6) but with no significant difference, when compared with the clinically detectable threshold.

CONCLUSIONS

As the WSL got deeper, the color of the lesion became more clinically visible. In shallow enamel, the best treatment option was one etching with one resin infiltrant application. For deep enamel and shallow dentine, one etching with two applications of infiltrant gave the best lesion masking. In deep dentine, it is advisable to perform one etching with two infiltration steps, taking in consideration that all deep dentine lesions without cavitation were partially masked, remained clinically detectable, and might require more invasive restorative procedures.

Performance of Different Methods for Detection of Incipient Occlusal Caries Lesions: An In Vitro Study

OBJECTIVE

The aim of this in vitro study was to evaluate the diagnostic performance of visual inspection (VI), laser fluorescence (LF pen), fluorescence camera (FC), and alternating current impedance spectroscopy technique (ACIST) for detection of incipient occlusal caries lesions. Histology was used as the gold standard to determine the interexaminer reliability of the methods, among three examiners with different levels of experiences (Examiner 1: 5 years; examiner 2: 10 years; and examiner 3: 25 years).

MATERIALS AND METHODS

One hundred two molar teeth were selected. The occlusal surfaces of teeth were evaluated with VI, LF pen, FC, and ACIST devices independently by three examiners. Diagnostic performances of methods were evaluated with binormal receiver-operating characteristics analysis. Interexaminer agreement of detection methods was assessed using Cohen's kappa coefficient values (p < 0.001).

RESULTS

Incipient enamel lesions were determined more successfully with VI by all examiners. All detection methods were presented with statistically acceptable interexaminer agreement (p < 0.001). For D₂ and D₃ thresholds, FC for examiner 1, VI for examiner 2, and both VI and FC for examiner 3 demonstrated statistically high sensitivity and specificity (p < 0.05).

CONCLUSIONS

It can be concluded that diagnostic performance of the methods was insufficient for detecting incipient occlusal caries lesions by itself. Performance can be improved by using them with VI as a traditional caries detection method.

The influence of the lining material on the repair of the infected dentin in young permanent molars after restoration: A randomized clinical trial

Aim:

This study evaluated the impact of liner material on the fluorescence, morphological and mineral characteristics of permanent carious dentin after cavity sealing.

Methods:

Thirty children (11.0 ± 2.7 years old) presenting at least one active deep carious lesion in permanent molars were selected. Fragments of carious dentin were removed from teeth before lining the cavity (baseline samples) with high-viscosity glass ionomer cement (G1) or an inert material (wax - G2). Cavities were restored with composite resin and reopened 60 days later, and other fragments were removed (60-day sample). The laser fluorescence (LF) readings and morphological and mineral changes of both groups were compared.

Results:

After 60 days, forty teeth were available for evaluation. Lower LF means were obtained (Wilcoxon signed-rank test; P < 0.05), and enhanced calcium and phosphorus levels were detected for both groups (t-test, P < 0.05). An uptake of fluorine was observed only in G1 (t-test; P < 0.05). Regardless of the group, baseline samples exhibited clear signs of bacterial invasion, and the collagen fibers were exposed; the 60-day samples showed a better-organized tissue with a more compact intertubular dentin.

Conclusion:

Caries arrestment with dentin reorganization occurs regardless of the lining material placed in contact with the infected dentin.

Desempenho de métodos baseados em indução de fluorescência na avaliação da remoção de dentina cariada

Resumo Introdução Critérios clínicos vêm sendo utilizados para determinação da presença de tecido cariado remanescente, mas geram dúvidas, tornando-se relevante a utilização de métodos que auxiliem na determinação da presença de cárie dentária remanescente. Objetivo Avaliar in vitro a eficácia de métodos de indução de fluorescência no diagnóstico da remoção de tecido cariado artificial dentinário. Material e método O esmalte oclusal de 94 terceiros molares humanos hígidos foi removido, expondo a dentina subjacente, para indução microbiológica de lesão de cárie artificial. Após a remoção do tecido cariado induzido, o remanescente dentinário foi avaliado por dois examinadores com DIAGNOdent, DIAGNOdent pen e Quantitative Light-Induced Fluorescence (QLF). Após todas as avaliações, secções dos dentes foram observadas e fotografadas em lupa estereoscópica com 30× de aumento por um examinador independente. As imagens foram analisadas no software Image J, permitindo a quantificação de tecido remanescente em milímetros quadrados. Foi calculada a reprodutibilidade interexaminador através de coeficiente intraclasse, sensibilidade, especificidade e área sob a curva ROC, e o teste de McNemar (p<0,05) foi aplicado para comparação dos diferentes métodos. Resultado Dos 94 dentes, 51 (54,2%) apresentaram remanescente de tecido cariado. Os valores de sensibilidade, especificidade e área sobre a curva ROC foram semelhantes para os três grupos (p>0,05). Os valores de reprodutibilidade variaram entre 0,952 e 0,978. Conclusão Dentre os métodos utilizados, o DIAGNOdent e o DIAGNOdent pen apresentaram melhor desempenho na avaliação da presença de cárie artificial remanescente quando comparados ao QLF.

Clinical, mineral and ultrastructural changes in carious dentin of primary molars after restoration

INTRODUCTION

Partial caries removal has been shown to be an effective method to treat deep carious lesions in deciduous teeth. Nevertheless, the possibility of keeping infected dentin in the cavity still requires additional investigation. The objective of this research was to describe changes in primary infected dentin after restoration with glass ionomer cement.

METHODS

Dentin from 45 primary molars with deep and active carious lesions was evaluated using clinical and laboratory criteria, before and 60 days after restoration. The clinical analysis evaluated dentin colour (CO), dentin consistency (COS) and laser fluorescence (LF). The laboratory procedures assessed bacterial contamination and mineral content (MC), and evaluated the dentin ultrastructure and collagen content. Data on CO, COS, LF and colony forming units were analysed using the Wilcoxon signed-rank test; MC, bacterial counts and collagen evaluations were evaluated using the Student's t-test.

RESULTS

After 60 days, lower values of LF were observed, together with a lower bacterial count, and a higher COS was found, with an increase in calcium, phosphorus and collagen contents. Differences were not detected for CO or for fluorine content. Baseline samples showed enlarged tubules with bacterial invasion; 60-day samples showed better organised tissue, with a more compact intertubular dentin and narrower tubules.

CONCLUSION

It is concluded that appropriate cavity sealing can promote beneficial changes in deep carious lesions of primary teeth, even in the presence of infected dentin.

Impact of different magnification levels on visual caries detection with ICDAS

OBJECTIVES

The aim of this in vitro study was to examine the effect of different levels of magnification on the accuracy and reliability of visual caries detection using ICDAS criteria.

METHODS

Occlusal surfaces of 100 extracted molars were assessed by 14 examiners (3rd and the 4th year dental students and dentists) using no magnification aids, a 2.5× Galilean loupe, a 4.5× Keplerian loupe, or a surgical microscope with 10× magnification. The assessments were repeated on a different day. Sensitivity, specificity, AUC and reliabilities were calculated according to the gold standard of histology.

RESULTS

We found that with increasing magnification, the number of surfaces rated as "sound" (ICDAS code 0) decreased, while the number of surfaces with a localized enamel breakdown (ICDAS code 3) increased. While the sensitivities increased, the values of the specificities decreased to an unacceptably low level irrespective of the clinical experience of the examiners.

CONCLUSIONS

ICDAS seems to be optimized for natural vision up to 2.0× magnification and not for high magnifications. The use of powerful magnification in visual caries detection involves the risk of unnecessary and premature invasive treatment.

CLINICAL SIGNIFICANCE

This paper discusses when it does and does not make sense to use magnification devices for visual caries detection using ICDAS criteria. Strong magnifications should be refrained from for this purpose.

Proximal caries lesion detection in primary teeth: does this justify the association of diagnostic methods?

The aim of this clinical study was to evaluate and compare the performance of visual exam with use of the Nyvad criteria (visual examination - (VE)), interproximal radiography (BW), laser fluorescence device (DIAGNOdent Pen-DDPen), and their association in the diagnosis of proximal lesions in primary teeth. For this purpose, 45 children (n = 59 surfaces) of both sexes, aged between 5 and 9 years were selected, who presented healthy primary molars or primary molars with signs suggestive of the presence of caries lesions. The surfaces were clinically evaluated and coded according to the Nyvad criteria and immediately afterwards with the DDPen. Radiographic exam was performed only on the surfaces coded with Nyvad scores 2, 3, 5, or 6. Active caries lesions and/or those with discontinuous surfaces were restored, considering the depth of lesion as reference standard. Sensitivity, specificity, accuracy, and area under ROC curve were calculated for each technique and its associations. Visual exam with Nyvad criteria presented the highest specificity, accuracy, and area under ROC curve values. The DDPen presented the highest sensitivity values. Association with one or more methods resulted in an increase in specificity. The performance of visual, radiographic, and DDpen exams and their associations were good; however, the clinical examination with the Nyvad criteria was sufficient for the diagnosis of interproximal lesions in primary teeth.

Assessment of a new infrared laser transillumination technology (808 nm) for the detection of occlusal caries-an in vitro study

This study aimed to evaluate in vitro performance of near-infrared laser transillumination (NIR-LTI) for detecting early occlusal caries in permanent teeth and compare it with quantitative light-induced fluorescence (QLF), DIAGNOdent Pen (DDPen), and conventional radiography (CR). Ninety-four occlusal surfaces presenting International Caries Detection and Assessment System (ICDAS) scores ranging from 0 to 3 were selected. For the NIR-LTI examination, images were captured using a prototype, which consists of a laser beam (808 nm) and an infrared CCD camera. One occlusal site on each tooth was assessed twice by two examiners. The teeth were prepared histologically and assessed for the presence of early caries. The intraexaminer correlation showed no difference between the NIR-LTI, DDPen, and QLF analytical methods, but all these methods differed from CR. Interexaminer reproducibility was moderate for NIR-LTI, which showed sensitivity (0.68), specificity (0.85), accuracy (0.73), and area under the receiver-operating characteristic (ROC) curve (0.76) similar to those of the fluorescence method and different from those of the CR. In conclusion, the performance of NIR-LTI was comparable to that of DDPen and QLF and may therefore be considered a valid and reliable alternative for the diagnosis of incipient lesions on the occlusal surface of permanent teeth.

In vitro evaluation of the efficacy of laser fluorescence (DIAGNOdent) to detect demineralization and remineralization of smooth enamel lesions

Objective:

Early detection of smooth surface lesions is important for appropriate management and monitoring of dental caries. The purpose of this in vitro study was to evaluate the efficacy of laser fluorescence to detect demineralization and remineralization of smooth enamel surfaces.

Materials and Methods:

In this in vitro study, 132 enamel blocks of semi-impacted human third molars were obtained; artificial caries lesions were induced and they were submitted to the pH-cycling process to create remineralization. Superficial microhardness (SMH) and laser fluorescence (LF) analysis were performed at baseline, after demineralization, and remineralization processes. The data were analyzed by Statistical Package for Social Sciences (SPSS)-16 using analysis of variance (ANOVA), Paired samples t-test, and Pearson's correlation test.

Results:

There was a significant difference between SMH values at baseline, after demineralization and after remineralization. Also, a statistically significant difference was observed between LF values in these three stages. The LF values increased after demineralization and then decreased after remineralization, and the SMH values decreased after demineralization and increased after remineralization. There was an inverse relationship between SMH and LF only at baseline and after demineralization, but not after remineralization.

Conclusion:

The results showed that LF is an appropriate method for detection of demineralization in an in vitro condition in smooth enamel lesions, but it was not so efficient in the detection of remineralization.

The Performance of ICDAS-II Using Low-Powered Magnification with Light-Emitting Diode Headlight and Alternating Current Impedance Spectroscopy Device for Detection of Occlusal Caries on Primary Molars

Early detection of occlusal caries in children is challenging for the dentists, because of the morphology of pit and fissures. The aim of this study was to compare in vitro the diagnostic performance of low-powered magnification with light-emitting diode headlight (LPMLED) using ICDAS-II criteria and AC Impedance Spectroscopy (ACIS) device, on occlusal surfaces of primary molars. The occlusal surfaces of 18 extracted primary molars were examined blindly by two examiners. The teeth were sectioned and examined under light microscopy using Downer's histological criteria as gold standard. Good to excellent inter- and intraexaminer reproducibility, higher sensitivity, specificity, and AUC values were achieved by LPMLED at D1 threshold. Also the relationship between histology and LPMLED was statistically significant. In conclusion visual aids have the potential to improve the performance of early caries detection and clinical diagnostics in children. Despite its potential, ACIS device should be considered as an adjunct method in detecting caries on primary teeth.

The performance of conventional and fluorescence-based methods for occlusal caries detection: an in vivo study with histologic validation

BACKGROUND

The authors conducted an in vivo study to determine clinical cutoffs for a laser fluorescence (LF) device, an LF pen and a fluorescence camera (FC), as well as to evaluate the clinical performance of these methods and conventional methods in detecting occlusal caries in permanent teeth by using the histologic gold standard for total validation of the sample.

METHODS

One trained examiner assessed 105 occlusal surfaces by using the LF device, LF pen, FC, International Caries Detection and Assessment System (ICDAS) criteria and bitewing (BW) radiographic methods. After tooth extraction, the authors assessed the teeth histologically. They determined the optimal clinical cutoffs by means of receiver operating characteristic curve analysis.

RESULTS

The specificities and sensitivities for enamel and dentin caries detection versus only dentin caries detection thresholds were 0.60 and 0.93 and 0.77 and 0.52 (ICDAS), 1.00 and 0.29 and 0.97 and 0.44 (BW radiography), 1.00 and 0.85 and 0.77 and 0.81 (LF device), 0.80 and 0.89 and 0.71 and 0.85 (LF pen) and 0.80 and 0.74 and 0.49 and 0.85 (FC), respectively. The accuracy values were higher for ICDAS, the LF device and the LF pen than they were for BW radiography and the FC.

CONCLUSIONS

The clinical cutoffs for sound teeth, enamel carious lesions and dentin carious lesions were, respectively, 0 through 4, 5 through 27 and 28 through 99 (LF device); 0 through 4, 5 through 32 and 33 through 99 (LF pen); and 0 through 1.2, 1.3 and 1.4 through 5.0 (FC). The ICDAS, the LF device and the LF pen demonstrated good performance in helping detect occlusal caries in vivo. The ICDAS did not seem to perform as well at the D(3) threshold (histologic scores 3 and 4) as at the D(1) threshold (histologic scores 1-4). BW radiography and the FC had the lowest performances in helping detect lesions at the D(1) and D(3) thresholds, respectively.

CLINICAL IMPLICATIONS

Occlusal caries detection should be based primarily on visual inspection. Fluorescence-based methods may be used to provide a second opinion in clinical practice.

In vivo remineralization of acid-etched enamel in non-brushing areas as influenced by fluoridated orthodontic adhesive and toothpaste

This study aimed to evaluate the in vivo remineralization of acid-etched enamel in non-brushing areas as influenced by fluoridated orthodontic adhesive and toothpaste. One hundred and twenty teeth from 30 volunteers were selected. The teeth were assigned to four treatments: no treatment (negative control); 37% phosphoric acid-etching (PAE) (positive control); PAE + resin-modified glass ionomer cement (RMGIC); and, PAE + composite resin. Patients brushed teeth with fluoridated (n = 15) or non-fluoridated (n = 15) toothpastes, so that etched enamel was protected with screens and it was not in contact with the brush bristles. Remineralization was evaluated by means of laser fluorescence (LF), environmental scanning electronic microscopy, and energy dispersive spectrometry after extraction. The LF means were compared by means of Wilcoxon and Mann Whitney tests. Environmental scanning electron microscopy scores were compared among the groups using a Kruskal Wallis test, whereas the Ca/P ratio was evaluated by means of an Analysis of Variance with subparcels (treatments) and Tukey's post-hoc test. There were no statistically significant differences between the tooth pastes and between the orthodontic adhesives evaluated. Most teeth presented only partial enamel remineralization. Therefore, the fluoride released by the RMGIC was not enough to cause increased crystal regrowth in the acid-etched enamel. The use of fluoridated toothpaste did not provide positive additional effect.

A novel LED-based device for occlusal caries detection

The aim of this in-vitro study was to compare the performance of laser-based (DIAGNOdent, KaVo, Biberach, Germany) and LED-based (Midwest Caries I.D., DENTSPLY Professional, New York, USA) caries detectors in the detection of occlusal caries in permanent molars. The study consisted of 129 visually sound or non-cavitated pits or fissures in 82 extracted permanent human molar teeth. Two trained examiners used the laser-based and LED-based caries detectors to examine the fissures for caries. The teeth were then sectioned at the surfaces suspected of containing occlusal caries and histologically evaluated using stereomicroscopy as a gold standard. Inter-examiner reliability of the caries detector examination was assessed using Cohen's Kappa statistics. The sensitivity, specificity, and accuracy in diagnosing occlusal caries using the two devices were calculated according to appropriate cut-off scores. Receiver operating characteristic (ROC) curves were also determined to compare the diagnostic performance of the devices in occlusal caries diagnosis. The cut-off level of significance was taken as p = 0.005. Cohen's Kappa showed substantial agreement for the laser-based caries detector (0.74), and almost perfect agreement for the LED-based (0.89) caries detector. The specificity of the laser-based device varied from 0.49 to 0.97 at T1 and T2. Its sensitivity varied from 0.33 to 0.65 at T1 and T2. The specificity of the LED-based device varied from 0.48 to 0.56 at T1 and T2. Its sensitivity varied from 0.65 to 0.84 at T1 and from 0.80 to 0.84 at T2. Taking the limitations of the current study into consideration, the DIAGNOdent laser pen was more accurate in determining when teeth were free of occlusal caries than was the Midwest Caries I.D. LED-based device, although the Midwest Caries I.D. device more often revealed the presence of occlusal caries than did the DIAGNOdent pen.

Light-emitting diode and laser fluorescence-based devices in detecting occlusal caries

The aim of this study was to assess the performance of two light-emitting diode (LED)- and two laser fluorescence-based devices in detecting occlusal caries in vitro. Ninety-seven permanent molars were assessed twice by two examiners using two LED- (Midwest Caries - MID and VistaProof - VP) and two laser fluorescence-based (DIAGNOdent 2095 - LF and DIAGNOdent pen 2190 - LFpen) devices. After measuring, the teeth were histologically prepared and classified according to lesion extension. At D1 the specificities were 0.76 (LF and LFpen), 0.94 (MID), and 0.70 (VP); the sensitivities were 0.70 (LF), 0.62 (LFpen), 0.31 (MID), and 0.75 (VP). At D(3) threshold the specificities were 0.88 (LF), 0.87 (LFpen), 0.90 (MID), and 0.70 (VP); the sensitivities were 0.63 (LF and LFpen), 0.70 (MID), and 0.96 (VP). Spearman's rank correlations with histology were 0.56 (LF), 0.51 (LFpen), 0.55 (MID), and 0.58 (VP). Inter- and intraexaminer ICC values were high and varied from 0.83 to 0.90. Both LF devices seemed to be useful auxiliary tools to the conventional methods, presenting good reproducibility and better accuracy at D(3) threshold. MID was not able to differentiate sound surfaces from enamel caries and VP still needs improvement on the cut-off limits for its use.

Advances in pediatric dentistry

This article addresses advances in 4 key areas related to pediatric dentistry: (1) caries detection tools, (2) early interventions to arrest disease progression, (3) caries-risk assessment tools, and (4) trends in pediatric procedures and dental materials.

Performance of laser fluorescence at tooth surface and histological section

This study aimed to evaluate a laser fluorescence device (the DIAGNOdent) and a visual classification system (ICDAS-II) for occlusal caries diagnosis. It also aimed to determine whether fluorescence measurements taken at the tooth surface correlate with the fluorescence measurements taken within the body of the lesion. The occlusal surfaces of 100 extracted permanent teeth were examined using ICDAS-II and DIAGNOdent (LF-tooth). Serial sections were made and lesion depth was assessed histologically. DIAGNOdent readings were also taken from the sections (LF-section). There were significant positive strong correlations between ICDAS-II and histology (r(S) = 0.71) and LF-section and histology (r(S) = 0.70), and only moderate correlations between LF-tooth and histology (r(S) = 0.51) and LF-tooth and LF-section (r(S) = 0.60). Diagnostic accuracy for ICDAS-II was generally better than for LF-tooth. While the DIAGNOdent device provides an objective reading for detection and monitoring of carious lesions, using the cut-off ranges previously suggested leads to inferior performance.

In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

Relationship between DIAGNOdent values and sealant penetration depth on occlusal fissures

The aim of this in vitro study was to evaluate the relationship between laser fluorescence values and sealant penetration depth on occlusal fissures. One hundred and sixty-six permanent molars were selected and divided into four groups, which were each treated using a different sealant (two clear and two opaque). The teeth were independently measured twice by two experienced dentists using two laser fluorescence devices-DIAGNOdent (LF and LFpen)-before and after sealing, and then thermoclycled. After measuring, the teeth were histologically prepared and assessed for caries extension. Digital photographs of the cut sealed sites were assessed, and the sealant penetration depth was measured. All 166 sites were measured by one of the examiners taking as limits the outer and inner surface of the sealant into the fissure. For each device (LF and LFpen) and each group, the difference between the values at baseline and after sealing was plotted against the sealant penetration depth and scatter plots were provided. It could be observed that most of the points were concentrated around the zero line, for both LF and LFpen in the four groups. In conclusion, there is no relation between changes in DIAGNOdent values and increasing of depth sealant penetration within the occlusal fissures.