Laser-assisted prevention of enamel caries: a 10-year review of the literature

Effect of Er:YAG Laser Irradiation on Preventing Enamel Caries: A Systematic Review and Meta-Analysis

Caries is a global health problem, and its prevention has become a main goal of modern dentistry. Laser irradiation is believed to have potential in preventing dental caries. The purpose of this systematic review and meta-analysis was to evaluate whether Er:YAG laser irradiation has the potential to prevent enamel caries. Based on inclusion and exclusion criteria, PubMed, Web of Science, and EMBASE databases were searched; 2 reviewers independently used these search strategies to review titles and abstracts, with no language or date restrictions, up to June 2023. For the quantitative analysis, continuous variables were analysed by standard mean difference (SMD) with a 95% confidence interval (CI). The statistical analyses were conducted using Review Manager and Cochrane Collaboration (2020). A total of 51 potentially eligible studies were identified, of which 16 in vitro studies were eventually included in the quantitative meta-analysis. Three studies showed a low risk of bias, and 13 studies a medium risk of bias. In general, there was no significant difference between the calcium ions released under acidic conditions after laser irradiation. The final results indicated that after Er:YAG laser irradiation, enamel could maintain higher surface microhardness in acidic environments, as well as smaller lesion depth and less mineral loss, revealing its potential in preventing enamel caries. However, the effect of laser irradiation on the release of calcium ions in acidic solutions and the surface microhardness of demineralised enamel was not significant. Therefore, more in vitro and clinical trials are needed in to evaluate whether Er:YAG laser irradiation can effectively prevent enamel caries in clinical settings.

White Spot Lesions in Fixed Orthodontics: A Literature Review on Etiology, Prevention, and Treatment

White spot lesions (WSLs) are a common complication after treatment using fixed orthodontic appliances. Decalcification of enamel surrounding fixed orthodontic appliances, known as WSLs, poses a significant aesthetic difficulty during and after treatment, as the purpose of fixed orthodontic therapy is to improve facial and dental appearance. Modern dentistry utilizes remineralization therapies to non-invasively treat WSLs to prevent the progression of disease and enhance the strength, appearance, and functionality of the affected tooth. This review aims to identify and assess the etiology, formation, and risk factors, as well as current treatment approaches used in achieving WSLs remineralization, induced by fixed orthodontic appliances. An electronic search on the PubMed and ScienceDirect databases was performed using a selected keyword. A total of 172 studies (from 2013 to 2023) were retrieved. Their references were also checked to find other relevant studies. Duplicate copies were excluded. After the abstract and full-text screening, only 39 studies were included. Even though numerous studies address the different treatment modalities for managing post-orthodontic WSLs, such as antiseptics; fluorides such as dentifrices, mouthwash, and varnish, and remineralizing agents such as casein phosphopeptides amorphous calcium phosphate, biomimetic self-assembling peptides, lasers, bleaching, microabrasion, and resin infiltration. There is a lack of evidence-based studies that examine the long-term effects of WSL treatment. Further well-performed controlled clinical trials with long-term follow-up are needed to establish best clinical practice.

Caries risk assessment by Caries Management by Risk Assessment (CAMBRA) Protocol among the general population of Pakistan-a multicenter analytical study

Background

Caries risk (CR) assessment tools are used to properly identify individuals with caries risk and to improve preventive procedures and programs. A tool such as CAMBRA determines the precise protective factors of caries and identifies an individual's specific therapeutic intervention. The purpose of this study was to assess the caries risk using the CAMBRA protocol among the general population of Pakistan.

Methods

This multicentre analytical study was conducted in ten dental hospitals in different provinces of Pakistan and the caries risk assessment was carried out using a questionnaire that was designed using the Caries Management by Risk Assessment (CAMBRA) protocol. All 521 participants were intra-orally examined to assess oral hygiene status and the presence of disease. Multiple logistic regression test was performed for analysis.

Results

A higher number of participants (61.2%) were found to be in the moderate risk category of caries risk assessment. The males are 51% less likely to have caries compared to the females (AOR = 0.49, P = 0.081). The majority of participants (71.3%) had one or more disease indicators, with white spots and visible cavities. Those with visible, heavy plaque were 13.9 times more likely to have caries compared to those without (AOR = 13.92, P < 0.001). Those using calcium and phosphate during the last 6 months were 90% less likely to have caries compared to those not using them (AOR = 0.10, P < 0.001). There was no significant interaction between all eight risk factors retained in the final model (P > 0.05), the Hosmer and Lemeshow Test P < 0.001, classification accuracy = 87.1%, and AUC = 91.2%.

Conclusion

The caries risk among the general population of Pakistan is moderate, with significant variation among age groups, education levels, and socioeconomic status.

CO2 laser irradiation combined with fluoridated dentifrice improved its protective effect on caries lesion progression regardless of the acidulated phosphate fluoride gel application: An in situ study

OBJECTIVE

This in situ study aimed to investigate the efficacy of CO2 laser at a 10.6-µm wavelength combined with 1.23% acidulated phosphate fluoride (APF) and fluoridated dentifrice with 1100 µg F/g (FD) to control enamel caries progression.

MATERIALS AND METHODS

Sixteen volunteers wore palatal appliances containing eight demineralized enamel specimens for four 14-day phases under sucrose exposure. These specimens were submitted to CO2 laser irradiation and APF alone or combined with FD. Treatment groups were non-fluoridated dentifrice-NFD, NFD + CO2 laser, NFD + APF, NFD + CO2 laser + APF, FD, FD + CO2 laser, FD + APF, and FD + CO2 laser + APF. Mineral loss, calcium fluoride (CaF2), fluorapatite (FAp), and fluoride in the biofilm were analyzed by analysis of variance followed by the Student-Newman-Keuls test, p < 0.05.

RESULTS

The highest mineral loss inhibition was noted when FD and CO2 laser irradiation were combined, which did not significantly differ from the FD + CO2 laser + APF group. The CaF2, FAp, and F in the biofilm were more pronounced when the FD and APF were combined. The CO2 laser irradiation promoted a slightly higher concentration of CaF2 in the enamel and F in the biofilm.

CONCLUSION

Although APF promotes the high formation of CaF2 and FAp, the combined use of FD with CO2 laser overcomes the APF effect in inhibiting the progression of artificial caries-like lesions in situ.

CLINICAL SIGNIFICANCE

Under the in situ design of this study, remineralization of white spot lesions was achieved through CO2 laser irradiation and daily use of fluoridated dentifrice. Future clinical trials are encouraged to substantiate this finding.

Comparative evaluation of fluoride-free remineralization agents with and without Er,Cr:YSGG laser on artificial enamel remineralization

This study aimed to evaluate the efficacy of fluoride-free remineralizing agents in initial enamel caries, with and without combined Er,Cr:YSGG laser application. The remineralization effect of various agents and their combinations on artificial initial caries was investigated using 10 experimental groups (n = 7): NC, negative control; PC, positive control; TM, calcium-phosphate compounds (CPP-ACP); TD, theobromine-containing toothpaste; RG, ROCS® remineralizing gel; L, Er,Cr:YSGG laser (2780 nm; 0.25 W; repetition rate, 20 Hz; pulse duration, 140 μs; tip diameter, 600 μm; without air/water cooling); L + fluoride toothpaste; L + TM; L + TD; and L + RG. The demineralized bovine enamel specimens were subjected to an 8-day pH cycle by daily application of the remineralizing agents and laser therapy once prior to the pH cycle and paste application. The enamel samples underwent the Vickers surface microhardness test, and one sample per group was analyzed with scanning electron microscopy. The Kruskal Wallis test was used to compare the microhardness recovery percentage (SMHR%) for each group, and multiple comparisons were made with the Dunn test. Groups L (p = 0.003), RG (p = 0.019), L + TM (p < 0.001), L + fluoride toothpaste (p = 0.001),and L + RG (p = 0.036) exhibited significant increase in SMHR%. The tested remineralizing agents exhibited no statistically significant difference in effect when used alone and in combination with Er,Cr:YSGG laser. Combined application of Er,Cr:YSGG laser and ROCS® remineralization gel effectively promoted enamel remineralization, while use of CPP-ACP and fluoride toothpaste alone was ineffective. Theobromine-containing toothpaste exhibited the least SMHR%. Long-term evaluation of these agents is recommended.

Application of laser on enamel surface with three types of bioactive glasses-based resin infiltrants: An in vitro study

OBJECTIVE

The study aimed to evaluate and compare the surface micro-hardness, roughness, color, and morphology of enamel after Er,Cr:YSGG laser irradiation, followed by application of three types of bioactive glasses-based resin infiltrants, and the samples groups were challenged with the pH cycle.

METHODOLOGY

Experimental photoactivated resin infiltrants were synthesized using dimethacrylate resins, whereby three different types of bioactive glasses (BGs), i.e., 45S5, fluoridated-BG (F-BG), and borosilicate-BG (B-BG), were incorporated into the resin system. Initially, white spot lesions were created artificially on the toosth enamel surface, then irradiated with Er,Cr:YSGG laser. Then, the resin-only and BG-based resins were infiltrated on the enamel surface. All samples were pH challenged for 14 days, and the micro-hardness, surface roughness, surface morphology, and color stability (ΔE) analyses were conducted before and after the 14 days pH challenge.

RESULTS

After laser irradiation, the micro-hardness was significantly high with 45S5 group compared to resin-only (p = 0.021), F-BG (p = 0.042), and B-BG (p = 0.001) groups. After the pH challenge, the micro-hardness values for all groups were reduced significantly (p ≤ 0.05). The surface roughness was least with the resin-only group and showed a non-significant difference with F-BG (p = 0.34) and significant differences with both B-BG (p = 0.005), and 45S5 (p = 0.010) groups. After the pH cycle, the roughness of all groups was increased significantly (p ≤ 0.05), except B-BG group showed a non-significant difference (p = 0.528). The B-BG group showed significantly high ΔE between day 0 and baseline compared to resin-only (p = 0.0008), F-BG (p = 0.017), and 45S5 (p = 0.029), whereas between day 14 and baseline, the lowest ΔE value was observed for B-BG (14.2 ± 2.10) and maximum for the resin-only (20.57 ± 2.47) group. The SEM images showed pitting on the surface of all resin infiltrant groups after 14 days of pH challenge.

CONCLUSION

The morphological difference was observed after the laser irradiation on the enamel surface. The differences in micro-hardness, surface roughness, and color were observed after the application of experimental resin infiltrants and significant differences were observed after the pH challenge.

Photobiomodulation Therapy and Pulp-Regenerative Endodontics: A Narrative Review

Regenerative endodontic procedures (REPs) were used to recover the dental pulp’s vitality in order to avoid the undesirable outcomes of conventional endodontic treatment and to promote dentinal formation, especially for immature permanent teeth. Photobiomodulation therapy (PBMT) exhibits photobiological and photochemical effects for improving the root canal’s environmental conditions by compensating for oxidative stress and increasing the blood supply to implanted stem cells and improving their survival. Basic research has revealed that PBMT can modulate human dental pulp stem cells’ (hDPSCs) differentiation, proliferation, and activity, and subsequent tissue activation. However, many unclear points still remain regarding the mechanisms of action induced by PBMT in REPs. Therefore, in this review, we present the applications of laser and PBMT irradiation to the procedures of REPs and in endodontics. In addition, the effects of PBMT on the regenerative processes of hDPSCs are reviewed from biochemical and cytological perspectives on the basis of the available literature. Furthermore, we consider the feasibility of treatment in which PBMT irradiation is applied to stem cells, including dental pulp stem cells, and we discuss research that has reported on its effect.

The Effect of a Bioactive Oral System and CO2 Laser on Enamel Susceptibility to Acid Challenge

This study evaluated the structural changes of enamel treated by the Regenerate system and carbon dioxide (CO2) laser against acid challenge. Thirty human enamel slabs were prepared and assigned into three groups: Group I: untreated (control); Group II: treated with the Regenerate system; and Group III exposed to CO2 laser. All specimens were subjected to an acid challenge (pH 4.5–7.0) for 14 days. Specimens were evaluated and compared at 120 points using five Raman microspectroscopic peaks; the phosphate vibrations ν1, ν2, ν3, and ν4 at 960, 433, 1029, and 579 cm−1, respectively, and the carbonate at 1070 cm−1, followed by Vickers microhardness test. The ratio of carbonate to phosphate was correlated to the equivalent microhardness numbers. The intensities of phosphate peaks ν1, ν2, and ν4 were reduced in all groups post-acid challenge, while the carbonate and ν3 were significantly increased (p < 0.000). Surfaces treated by Regenerate exhibited higher peak intensity of phosphate and carbonate before and after pH-cycling (p < 0.05). The mineral content in enamel had a direct effect on tissue microhardness, and the CO2-lased surfaces showed a reduced carbonate content and higher microhardness values. Both approaches induced surface changes that can protect enamel against acid challenge resulting in a significant benefit for dental healthcare.

The impact of Er:YAG laser combined with fluoride treatment on the supragingival plaque microbiome in children with multiple caries: a dynamic study

BACKGROUND

As a minimally invasive tool for caries prevention tool, the pulsed erbium:yttrium-aluminum-garnet (Er:YAG) laser is being used in a large number of studies. Microorganisms are extremely vital in the occurrence and development of dental caries. However, the impact of Er:YAG laser irradiation combined with fluoride on the dynamic microbial changes that occur in dental plaques is still uncertain. In this study, we examined the effect of an Er:YAG laser combined with fluorine on supragingival microbial composition and diversity in children with multiple caries.

METHODS

In this study, dental plaque samples (n = 48) were collected from 12 children with over 8 filled teeth. Supragingival plaques from left mandibular molars before (CB) and after fluoride treatment (CA) and right mandibular molars before (EB) and after fluoride+Er:YAG laser treatment (EA) were collected from each patient. In CB and EB groups, the samples were collected just before the treatments. In CA and EA groups, the samples were collected 1 month after treatments. Then, all specimens were subjected to 16S rRNA high-throughput sequencing to investigate the changes in microbial composition and diversity in mandibular molar supragingival plaques before and after fluoride or fluoride+Er:YAG laser treatment.

RESULTS

The dental plaque microbial diversity was higher in the EA group than in the EB group (baseline levels), and the microbial composition changed in EA group compared with EB group (P < 0.05). The levels of microorganisms associated with caries occurrence, including Proteobacteria, Fusobacteria, and Bacteroidetes, declined, while the levels of Faecacterium, Fastidiosipila, Vibrio, and Shewanella increased in EA group compared with EB group. The declines in Firmicutes, Streptococcus, Fusobacterium, and Veillonella levels were significantly lower in the EA group than in the CA group.

CONCLUSION

The combined application of the Er:YAG laser and fluoride may be more effective than using fluoride alone in reducing the proportion of cariogenic bacteria, increasing the diversity of plaque microorganisms, and further promoting the microecological balance.

Effects of a 445 nm diode laser and silver diamine fluoride in preventing enamel demineralisation and inhibiting cariogenic bacteria

OBJECTIVE

To study the effects of a 445 nm diode laser (L) and silver diamine fluoride (F) on preventing enamel demineralisation and inhibiting cariogenic bacteria.

METHODS

Thirty-three enamel slices were sectioned each into four blocks for four groups to receive L with F (LF), F, L and Water (W, control). Ten blocks from each group were used to evaluate demineralization. Surface morphology, lesion depth and nanohardness of the blocks after pH-cycling were studied by scanning electron microscopy (SEM), nanohardness test, and micro-computed tomography, respectively. Twenty-three blocks per group were used for biofilm assessment. Morphology, viability, and growth kinetics of the Streptococcus mutans biofilm were assessed by SEM, confocal laser scanning microscopy, and the counting of colony-forming units (CFUs), respectively.

RESULTS

SEM images of LF-treated enamel showed an intact surface compared with other groups. Nanohardness (GPa) for LF, F, L and W were 1.43±0.17, 1.01±0.11, 1.04±0.13 and 0.73±0.14, respectively (p<0.001; LF>F, L>W). Their lesion depths (µm) were 46±8, 52±6, 88±13 and 111±9, respectively (p<0.001; LF, F<L<W). SEM showed few bacteria for LF and F compared with other groups. Their dead-live ratio were 1.67±0.13, 1.60±0.15, 0.39±0.05 and 0.32±0.05, respectively (p<0.001; LF, F>L>W). Log CFUs for LF, F, L and W were 4.2±0.3, 4.5±0.2, 7.9±0.3 and 9.4±0.2, respectively (p<0.05; LF<F<L<W). Two-way ANOVA analysis revealed an interaction effect on nanohardness and Log CFUs between the laser irradiation and SDF treatment (p<0.001).

CONCLUSION

This study showed a superior caries preventive effect of a combined treatment of the diode laser and SDF. Because diode laser and SDF are affordable and readily available, clinicians can provide this treatment to their patients for caries prevention.

CLINICAL SIGNIFICANCE STATEMENT

Diode lasers are handy, afforable and readily avaliable to clinicians. This study provides information of use of 445 nm diode laser for caries prevetion. The laser irradiation hopefully can be added before conventional topical SDF application.

Sodium N-Lauroylsarcosinate (SNLS) as a Selective Collector for Calcareous Phosphate Beneficiation

Sodium N-lauroylsarcosinate (SNLS) was employed as a selective flotation collector for dolomite–apatite separation. The influence of pH, condition time, and collector dose on the flotation performance of both apatite and dolomite minerals was investigated using single mineral and binary mixed mineral flotation experiments. The performance of SNLS was compared to sodium oleate (NaOL), as a standard collector. In this study, the adsorption mechanism of SNLS on both minerals was studied using zeta-potential and FT-IR measurements. The results showed that SNLS prefers to adsorb on the dolomite mineral. The maximum difference in floatability was 83% for single dolomite and apatite minerals at pH 10 in the presence of 0.05 mmol/L SNLS. Binary mixtures of dolomite and apatite minerals of different ratios were applied, to evaluate their separation efficiency. The SNLS could separate dolomite from its mixtures with apatite minerals. Using 0.2 mmol/L of SNLS at pH 10, a concentrate of 30.9% P2O5 and 0.79% MgO was obtained from a natural phosphate ore having 25.8% P2O5 and 5.16% MgO.

Combined Effects of Topical Fluorides and Semiconductor Lasers on Prevention of Enamel Caries: A Systematic Review and Meta-Analysis

Objective: To compare the effects of combined treatment of topical fluoride and semiconductor laser (F&L) with topically using fluoride (F) on remineralization and prevention of enamel caries. Background: There is no agreement on whether semiconductor lasers can promote the effect of topical fluoride on the remineralization and prevention of dental caries. This study is the first systematic review and meta-analysis to investigate the pooled effect of data from studies that compared the combined use of semiconductor lasers and topical fluorides with the single use of fluoride on remineralization and prevention of caries. Methods: We performed literature search on Scopus, Web of Science, and PubMed. The keywords were as follows: ((diode lasers) OR (diode laser) OR (quantum cascade laser) OR (quantum cascade lasers) OR (Gallium Aluminum Arsenide lasers) OR (Gallium Aluminum Arsenide laser) OR (GaAlAs lasers) OR (GaAlAs Laser) OR (semiconductor laser) OR (semiconductor lasers)) AND ((caries) OR (dental caries) OR (remineralisation) OR (remineralization) OR (demineralization) OR (demineralisation)) AND fluoride. We carried out meta-analysis to compare the microhardness of demineralized enamel, lesion depth (LD), and percent reduction of calcium (Ca%) of sound enamel receiving F&L with F. Results: The search identified nine laboratory studies, which used 445 to 980 nm semiconductor lasers with various fluorides. The standard mean difference of microhardness of demineralized enamel between F&L and F was 1.06 [95% confidence interval (CI): 0.12 to 2.00, p = 0.03]. No difference was found in LD (95% CI: -1.63 to 0.10, p = 0.08) and Ca% (95% CI: -0.52 to 1.28, p = 0.40) on sound enamel between the two groups. Conclusions: Semiconductor lasers enhance the effect of fluoride on remineralizing but not on preventing enamel caries. Moreover, substantial heterogeneity was found among the studies, and the results should be interpreted cautiously.

Comparative Evaluation of Influence of Nd:YAG Laser (1064 nm) and 980 nm Diode Laser on Enamel around Orthodontic Brackets: An In Vitro Study

(1) Background: The prevention of demineralizing lesions at the enamel structure level continues to represent a challenge in daily dental practice. When bacteria influence the pH level, this will decrease below the threshold for remineralization and the dissociation of hydroxyapatite will occur with a high percentage of phosphate and calcium loss. These elements continue to be studied by many authors in order to obtain a working protocol that will lead to their stabilization at the level of the enamel structure, thus preventing the demineralization process. The aim of this study is to evaluate and compare the influence of two types of laser wavelengths on the surface morphology and mineral components of the enamel through an examination with scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDX). (2) Methods: Thirty permanent human incisors extracted for periodontal reasons from patients aged 25−40 years old were selected for this study. Metallic brackets (SS Standard 022 Slot, OC Orthodontics, McMinnville, OR, 97128, USA) were bonded onto each tooth. The buccal surface was randomly assigned three sections: Section A—negative control (no treatment), section B—treated with 980 nm Gallium−Aluminum−Arsenide diode laser (a 300 µm optic fiber was used with 0.8 W output power, energy density of 5.33 J/mm2, in continuous mode, for 30 s, oriented perpendicularly to the enamel surface in contact mode) (KaVo GENTLEray 980 Diode Laser, Kaltenbach & Voigt GmbH, Biberach, Germany), and section C—treated with Nd:YAG laser (a 300 µm fiber was carried out at a 1 mm distance from the enamel surface with 0.75 W power, 75 mJ pulse energy, pulse repetition rate of 10 Hz, 5 J/mm2 fluency, average exposure time of 30 s, and water cooling assisted) (LIGHTWALKER AT S, M021-5AF/1 S, Fotona d.o.o, Ljubljana, Slovenia). The elements evaluated in this study were calcium (Ca), phosphate (P), oxygen (O), and carbon (C). A one-way analysis of variance, paired t-tests, and independent t-tests were carried out to evaluate the results using the SPSS 19 IBM Statistical package software for Microsoft. (3) Results: The evaluation of the data indicated that both wavelengths produced an increase in Ca wt% (for diode laser the mean of Ca wt% before irradiation was 21.06, while that after treatment reached 28.24; and for Nd:YAG laser, the mean of Ca wt% before irradiation was 21.31, while that after treatment reached 33.88); as well, the 980 nm diode laser decreased P wt% (from 17.20 before irradiation to 16.92 after irradiation) and the Nd:YAG laser increased P wt% (from 17.46 before irradiation to 18.28 after irradiation). These results showed a statistically significant difference at the p < 0.05 level. (4) Conclusions: It can be concluded that the best improvement of enamel chemical composition was obtained with Nd:YAG irradiation.

Enamel Erosion Reduction through Coupled Sodium Fluoride and Laser Treatments before Exposition in an Acid Environment: An In Vitro Randomized Control SEM Morphometric Analysis

(1) Background: Erosive lesions of dental enamel are steadily increasing owing to both the availability of exogenous acid and the production of endogenous acid. The aim of this study was to investigate the erosion-inhibiting potential of a diode laser irradiation and topical application of fluoride used alone or in combination on the enamel surface of extracted teeth before exposure to an acidic solution. (2) Methods: The four axial enamel surfaces of 40 healthy molars were used for four study groups: (A) no treatment; (B) application of fluoride gel for 120 s; (O) a diode laser application for 120 s; and (X) a combined laser/fluoride for 120 s. Each enamel surface was examined by SEM (scanning electron microscopy). (3) Results: At 700× magnification, it was possible to detect the enamel prisms of the test area of groups A, B, and O, while no structures such as enamel prisms were highlighted for group X because they were covered by an amorphous layer. The mean number of prisms ×1000 µm2 was 7.2 units with an SD of 0.72 for group A, 8 units with an SD of 0.96 for group B, and 4.8 units with a SD of 0.4 for group O. Student’s t-test showed no significant difference between group A and B with a p = 0.054. Group O showed a significant reduction of prims ×1000 µm2 compared with group A (p = 0.0027) and group B (p = 0.0009). Student’s t-test showed no significant difference between groups A and B with a p = 0.054. Group O showed a significant reduction of prims density with respect to group A (p = 0.0027) and group B (p = 0.0009). (4) Conclusions: This amorphous layer might be correlated with the effect of laser on enamel, which reduces both water and carbonate ion; increases the crystallinity of hydroxyapatite, and improves the mechanical properties of enamel; which is responsible for greater protection expressed by the enamel of group X against acid attacks.

Rehardening of Eroded Enamel with CPP-ACFP Paste and CO2 Laser Treatment

BACKGROUND

Diet and lifestyle can destroy tooth structure due to the dissolution of enamel by acidic beverages. The present study evaluated the effect of CO2 laser irradiation and CPP-ACFP (casein phosphopeptide and amorphous calcium phosphate with fluoride) paste on the remineralization of enamel eroded by carbonated soft drinks.

METHODS

In the present in vitro study, 46 human sound premolar teeth were sectioned mesiodistally to achieve 84 samples. Fourteen samples were assigned to the positive control group (G1), and the remaining samples were immersed in 500 mL of cola drink for 2 minutes, followed by rinsing with distilled water for 10 seconds. This procedure was carried out three times to create erosive lesions. Then, the 60 eroded samples were randomly assigned to five groups of G2 to G6 in terms of the treatment as follows: negative control (G2), CO2 laser irradiation (G3), CPP-ACFP paste (G4), CO2 laser irradiation followed by CPP-ACFP paste application (G5), and CPP-ACFP paste application followed by CO2 laser irradiation (G6). The mean surface microhardness of the enamel surface was evaluated and determined at three points for each sample. Data were analyzed with one-way ANOVA and Tukey HSD tests (α = 0.05).

RESULTS

The highest and the lowest hardness values were recorded in the G1 (314 ± 12 kg/mm2) and G2 (213.7 ± 12 kg/mm2) groups, respectively. ANOVA revealed significant differences between the study groups (P < 0.001). Two-by-two comparisons showed significant differences between the G2 group and the other groups, indicating the efficacy of all the treatment modalities in tooth remineralization and rehardening procedures (P < 0.05). Only in group G6, the enamel microhardness was not significantly different from the G1 positive control group (P > 0.05).

CONCLUSION

Considering the parameters used in the present study, CO2 laser irradiation or CPP-ACFP paste application alone increased eroded enamel's surface hardness; however, their sequential application was more effective in rehardening the eroded enamel's surface to near-normal levels.

Er:YAG laser-induced damage to a dental composite in simulated clinical scenarios for inadvertent irradiation: an in vitro study

Inadvertent Er:YAG laser irradiation occurs in dentistry and may harm restorative materials in teeth. The aim of this in vitro study was to quantify Er:YAG laser-induced damage to a nanohybrid composite in simulated clinical scenarios for inadvertent direct and indirect (reflection) laser irradiation. The simulation was performed by varying the output energy (OE;direct˃indirect) reaching the specimen and the operating distance (OD;direct˂indirect). Composite specimens were irradiated by an Er:YAG laser. The ablation threshold was determined and clinically relevant parameters were applied (n = 6 for each OE/OD combination) for direct (OE: 570 mJ/OD: 10 mm, OE: 190 mJ/OD: 10 mm) and indirect irradiation (OE: 466 mJ/OD: 15 mm, OE: 57 mJ/OD: 15 mm, OE: 155 mJ/OD: 15 mm, OE: 19 mJ/OD: 15 mm). The extent of damage in the form of craters was evaluated using a laser scanning microscope (LSM) and a conventional light microscope (LM). The ablation threshold was determined to be 2.6 J/cm². The crater diameter showed the highest value (LM: 1075 ± 18 µm/LSM: 1082 ± 17 µm) for indirect irradiation (reflectant:dental mirror) (OE: 466 mJ/OD: 15 mm). The crater depth showed the highest and comparable value for direct (OE: 570 mJ/OD: 10 mm; LSM: 89 ± 2 µm) and indirect irradiation (OE: 466 mJ/OD: 15 mm; LSM: 90 ± 4 µm). For each OD, the crater diameter, depth, and volume increased with higher laser fluence. However, the OD—and thus the laser spot diameter—also had an enlarging effect. Thus, indirect irradiation (reflectant:dental mirror) with only 47% of the laser fluence of direct irradiation led to a larger diameter and a comparable depth. The three-dimensional extent of the crater was large enough to cause roughening, which may lead to plaque accumulation and encourage caries, gingivitis, and periodontitis under clinical conditions. Clinicians should be aware that reflected irradiation can still create such craters.

Assessment of the preventive effects of Nd:YAG laser associated with fluoride on enamel caries using optical coherence tomography and FTIR spectroscopy

Objective

This in vitro study characterized and monitored, by Optical Coherence Tomography (OCT) and Fourier Transformed Infrared Spectroscopy (FTIR), the effects of the association of acidulated phosphate fluoride gel (APF-gel) and Nd:YAG (neodymiun:yttrium-aluminum-garnet) laser, as sequencial treatments, in the prevention of incipient enamel caries lesions.

Methods

120 human enamel samples were randomized into 3 groups (n = 40): APF-gel (1.23% F^-, 4 min.); Laser+APF (Nd:YAG laser irradiation—0.6W, 84.9J/cm², 10Hz, followed by APF-gel); and APF+Laser (APF-gel followed by laser irradiation). The samples were subjected to a 15-day pH-cycling, evaluated by OCT (quantification of optical attenuation coefficient–OAC) and FTIR (analysis of carbonate and phosphate content) before treatments, after treatments, and on the 5^th, 10^th and 15^th days of pH-cycling. The statistical analysis was performed (α = 5%).

Results

The Optical Attenuation Coefficient (OAC) assessed by OCT increases with the progression of demineralization, and the Laser+APF presented the highest values of OAC in 10^th and 15^th days of pH-cycling. Nd:YAG decreased the carbonate content after treatment regardless of the application order of the APF-gel, while APF-gel did not interfere in the composition of enamel. The carbonate content was also changed in the first 5 days of the pH-cycling in all groups.

Conclusion

Nd:YAG laser irradiation before or after the application of APF-gel did not influence the appearance of incipient caries lesions, showing no synergistic effect. Regardless of the application order of the APF-gel, laser irradiation reduces the carbonate content of the enamel, which also changes during the demineralization process. However, irradiation before the application of APF-gel increased the speed of progression of the lesions, which positively impacts public health as it can prevent caries disease, even in high risk individuals. OCT and FTIR are suitable for assessing this effect.

Use of the Er:YAG Laser in Conservative Dentistry: Evaluation of the Microbial Population in Carious Lesions

The aim of this study is to investigate the Erbium:Yttrio-Aluminum-Granate (Er:YAG) laser photothermal and mechanical effects on cariogenic species concentration and on the microbial load composition of therapeutic cavities, in order to evaluate the possible micro-organisms reduction and make a comparison with manual and rotating conventional therapy (CT). A clinical trial was designed, including adults with active deep carious lesions on permanent teeth who were divided into two groups, i.e., control group and intervention group treated with CT and Er:YAG therapy, respectively. Before and after any conservative treatment, two oral samples were collected using a small sterile microbrush scrubbed within the base of the dentinal cavity tissue. The percentage of reduction and the colony-forming units (CFUs) count after Er:YAG and conventional treatments were compared for total microorganisms, including Candida spp., Streptococcus spp., and Lactobacillus spp. The microbial reduction varied from 90.2% to 100% and was significantly observed for total microorganisms and Streptococcus spp. (p < 0.05). The Er:YAG laser shows the potential for clinical applications, especially with paediatric and complicated patients, thanks to its minimally invasive properties and its effect on the reduction of microbial load.

Use of a novel 9.3-μm carbon dioxide laser and silver diamine fluoride: Prevention of enamel demineralisation and inhibition of cariogenic bacteria

OBJECTIVE

To investigate the effects of a 9.3-μm carbon dioxide (CO₂) laser and silver diamine fluoride (SDF) on the prevention of enamel demineralisation and inhibition of cariogenic bacteria.

METHODS

Enamel blocks were applied with Laser (Group-1), SDF (Group-2), Laser + SDF (Group-3) and no treatment (Group-4), and then subjected to an 8-day pH-cycling for cariogenic challenge. Lesion depth and cross-sectional micro-hardness were assessed. Surface morphological and chemical changes were studied using scanning electron microscope (SEM) with energy dispersive spectroscopy (EDS). For the antibacterial activity, treated enamel blocks were incubated with Streptococcus mutans. The biofilm morphology, kinetics and viability were assessed by SEM, colony-forming units (CFUs) and confocal laser scanning microscope (CLSM), respectively.

RESULTS

Lesion depths (μm) for Group-1 to Group-4 were 88 ± 21, 26 ± 11, 13 ± 9 and 115 ± 25, respectively (p < 0.001; Group-2 and Group-3 < Group-1 < Group-4). Group-3 had a significantly higher cross-sectional micro-hardness than the other three groups. EDS determined that Group-4 had the lowest calcium-to-phosphorus molar ratio among the groups (p < 0.001). SEM images showed apparent bacteria accumulation on enamel surfaces in Group-4, but not in other groups. Log CFUs for Group-1 to Group-4 were 6.2 ± 0.6, 2.9 ± 0.8, 2.2 ± 1.1 and 7.3 ± 0.3, respectively (p < 0.001; Group-2 and Group-3 < Group-1 < Group-4). CLSM images revealed that live bacteria dominated in Group-4, but not in other groups.

SIGNIFICANCE

The irradiation with a 9.3-μm CO₂ laser alone can prevent the demineralisation of enamel and reduce the adhesion of cariogenic bacteria. Moreover, adding SDF can significantly increase the preventive effect and antibacterial ability.

Repopulation of decellularised articular cartilage by laser-based matrix engraving

BACKGROUND

In spite of advances in the treatment of cartilage defects using cell and scaffold-based therapeutic strategies, the long-term outcome is still not satisfying since clinical scores decline years after treatment. Scaffold materials currently used in clinical settings have shown limitations in providing suitable biomechanical properties and an authentic and protective environment for regenerative cells. To tackle this problem, we developed a scaffold material based on decellularised human articular cartilage.

METHODS

Human articular cartilage matrix was engraved using a CO₂ laser and treated for decellularisation and glycosaminoglycan removal. Characterisation of the resulting scaffold was performed via mechanical testing, DNA and GAG quantification and in vitro cultivation with adipose-derived stromal cells (ASC). Cell vitality, adhesion and chondrogenic differentiation were assessed. An ectopic, unloaded mouse model was used for the assessment of the in vivo performance of the scaffold in combination with ASC and human as well as bovine chondrocytes. The novel scaffold was compared to a commercial collagen type I/III scaffold.

FINDINGS

Crossed line engravings of the matrix allowed for a most regular and ubiquitous distribution of cells and chemical as well as enzymatic matrix treatment was performed to increase cell adhesion. The biomechanical characteristics of this novel scaffold that we term CartiScaff were found to be superior to those of commercially available materials. Neo-tissue was integrated excellently into the scaffold matrix and new collagen fibres were guided by the laser incisions towards a vertical alignment, a typical feature of native cartilage important for nutrition and biomechanics. In an ectopic, unloaded in vivo model, chondrocytes and mesenchymal stromal cells differentiated within the incisions despite the lack of growth factors and load, indicating a strong chondrogenic microenvironment within the scaffold incisions. Cells, most noticeably bone marrow-derived cells, were able to repopulate the empty chondrocyte lacunae inside the scaffold matrix.

INTERPRETATION

Due to the better load-bearing, its chondrogenic effect and the ability to guide matrix-deposition, CartiScaff is a promising biomaterial to accelerate rehabilitation and to improve long term clinical success of cartilage defect treatment.

FUNDING

Austrian Research Promotion Agency FFG ("CartiScaff" #842455), Lorenz Böhler Fonds (16/13), City of Vienna Competence Team Project Signaltissue (MA23, #18-08).

Repopulation of decellularised articular cartilage by laser-based matrix engraving

Background

In spite of advances in the treatment of cartilage defects using cell and scaffold-based therapeutic strategies, the long-term outcome is still not satisfying since clinical scores decline years after treatment. Scaffold materials currently used in clinical settings have shown limitations in providing suitable biomechanical properties and an authentic and protective environment for regenerative cells. To tackle this problem, we developed a scaffold material based on decellularised human articular cartilage.

Methods

Human articular cartilage matrix was engraved using a CO₂ laser and treated for decellularisation and glycosaminoglycan removal. Characterisation of the resulting scaffold was performed via mechanical testing, DNA and GAG quantification and in vitro cultivation with adipose-derived stromal cells (ASC). Cell vitality, adhesion and chondrogenic differentiation were assessed. An ectopic, unloaded mouse model was used for the assessment of the in vivo performance of the scaffold in combination with ASC and human as well as bovine chondrocytes. The novel scaffold was compared to a commercial collagen type I/III scaffold.

Findings

Crossed line engravings of the matrix allowed for a most regular and ubiquitous distribution of cells and chemical as well as enzymatic matrix treatment was performed to increase cell adhesion. The biomechanical characteristics of this novel scaffold that we term CartiScaff were found to be superior to those of commercially available materials. Neo-tissue was integrated excellently into the scaffold matrix and new collagen fibres were guided by the laser incisions towards a vertical alignment, a typical feature of native cartilage important for nutrition and biomechanics. In an ectopic, unloaded in vivo model, chondrocytes and mesenchymal stromal cells differentiated within the incisions despite the lack of growth factors and load, indicating a strong chondrogenic microenvironment within the scaffold incisions. Cells, most noticeably bone marrow-derived cells, were able to repopulate the empty chondrocyte lacunae inside the scaffold matrix.

Interpretation

Due to the better load-bearing, its chondrogenic effect and the ability to guide matrix-deposition, CartiScaff is a promising biomaterial to accelerate rehabilitation and to improve long term clinical success of cartilage defect treatment.

Funding

Austrian Research Promotion Agency FFG (“CartiScaff” #842455), Lorenz Böhler Fonds (16/13), City of Vienna Competence Team Project Signaltissue (MA23, #18-08)

High pressure exploration in the Li-Ln-V-O system

Using in situ high pressure Raman spectroscopy, two structural changes were observed in a sample of the composition LiLa5O5(VO4)2. Taking this into account and by combining different conditions, three new compounds were further obtained from high pressure-high temperature synthesis. Their crystal structure description was done using the antiphase approach, which implies the presence of oxygen-centered [OLn4] building units, where Ln is La for (1) β-LiLa5O5(VO4)2 and (2) β-LiLa2O2(VO4) or Nd for (3) LiNd5O5(VO4)2 compounds. (1) crystallizes in the triclinic space group P1[combining macron] with unit cell parameters of a = 5.8167(15) Å, b = 12.2954(28) Å, c = 18.7221(69) Å, α = 102.03(2)°, β = 98.76(2)°, and γ = 103.54(2)°; a 3D structure was deduced from the ambient pressure polymorph. (2) also crystallizes in P1[combining macron] with a = 5.8144(7) Å, b = 5.8167(7) Å, c = 8.5272(1) Å, α = 98.184(7)°, β = 100.662(7)° and γ = 92.579(7)°. It shows a 2D structure with [La2O2]2+ layers surrounded by [LiO4] and [VO4] tetrahedra sharing corners and edges. (3) exhibits a 3D architecture isotypic with AP-LiLa5O5(VO4)2. The crucial role of high pressure in such types of synthesis and materials is also discussed.

Microbial Etiology and Prevention of Dental Caries: Exploiting Natural Products to Inhibit Cariogenic Biofilms

Dental caries is one of the most common microbe-mediated oral diseases in human beings. At present, the accepted etiology of caries is based on a four-factor theory that includes oral microorganisms, oral environment, host, and time. Excessive exposure to dietary carbohydrates leads to the accumulation of acid-producing and acid-resistant microorganisms in the mouth. Dental caries is driven by dysbiosis of the dental biofilm adherent to the enamel surface. Effective preventive methods include inhibiting the cariogenic microorganisms, treatment with an anti-biofilm agent, and sugar intake control. The goal is to reduce the total amount of biofilm or the levels of specific pathogens. Natural products could be recommended for preventing dental caries, since they may possess fewer side effects in comparison with synthetic antimicrobials. Herein, the mechanisms of oral microbial community development and functional specialization are discussed. We highlight the application of widely explored natural products in the last five years for their ability to inhibit cariogenic microorganisms.

Efficacy of CO lasers in preventing dental caries in partially erupted first permanent molars: a randomized 18-month clinical trial

The aim of this controlled randomized double-blinded clinical trial was to evaluate the use of a CO₂ laser with or without topical application of acidulated fluorides in the prevention of dental caries in partially erupted first permanent molars. We selected 61 healthy children at high risk of caries, all between 6 and 8 (7.1 ± 0.8) years of age and with 4 partially erupted first permanent molars. A CO₂ laser device emitting at 10.6 μm was used (0.5 W, 0.05 mJ per pulse, 10 kHz). Each first molar in an individual was randomly assigned to one treatment: (L) CO₂ laser (0.066 J/cm²); (FL) 1.23% acidulated fluoride gel and CO₂ laser (0.066 J/cm²); (V) 5% fluoride varnish, or (S) sealant (control). Patients were followed-up at 3, 6, 12, and 18 months after treatment, through direct visual examination and by an operator blinded to the treatments (kappa ≥ 0.70). The International Caries Detection and Assessment System (ICDAS-II) index was used to assess the soundness of tooth structure or the presence of white spot lesions, cavitated enamel, and/or dentin lesions. The Yildiz Visual Index was used to evaluate sealant retention. Results were evaluated using Kaplan-Meier survival analysis, and the hazard ratio of the treatments was estimated using shared frailty models with a gamma distribution, which considered the patient as a cluster. There were no significant differences among treatments compared to sealants. After 18 months, the use of a CO₂ laser with or without acidulated fluorides was shown to be effective in preventing caries on the occlusal surface of partially erupted permanent first molars in children at high risk for caries.