Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Janus functional electrospun polyurethane fibrous membranes for periodontal tissue regeneration

The guided tissue regeneration (GTR) technique with GTR membranes is an efficient method for repairing periodontal defects. Conventional periodontal membranes act as physical barriers that resist the growth of fibroblasts, epithelial cells, and connective tissue. However, they cannot facilitate the regeneration of periodontal tissue. To address this issue, the exploitation of novel GTR membranes with bioactive functions based on therapeutic requirements is critical. Herein, we exploited a biodegradable bilayer polyurethane fibrous membrane by uniaxial electrostatic spinning to construct two sides with Janus properties by integrating the bioactive molecule dopamine (DA) and antimicrobial Gemini quaternary ammonium salt (QAS). The DA-containing side, located inside the injury, can effectively promote cell adhesion and mesenchymal stem cell growth as well as support mineralization and antioxidant properties, which are beneficial for bone regeneration. The QAS-containing side, located on the outer surface of the injury, endows antibacterial properties and limits fibroblast adhesion and growth on its surface owing to its strong hydrophilicity. An in vivo study demonstrates that the Janus polyurethane fibrous membrane can significantly promote the regeneration of periodontal defects in rats. Owing to its superior mechanical properties and biocompatibility, this polyurethane fibrous membrane has potential applications in the field of periodontal regeneration.

The Influence of Long-Time Storage on the Structure and Properties of Multi-Block Thermoplastic Polyurethanes Based on Poly(butylene adipate) Diol and Polycaprolactone Diol

A series of semi-crystalline multi-block thermoplastic polyurethanes (TPU), containing poly(butylene adipate) (PBA), polycaprolactone (PCL) and their equimolar mixture (PBA/PCL) as a soft segment was synthesized. The changes in the physical-mechanical and thermal properties of the materials observed in the course of a 36-month storage at room temperature were related to the corresponding structural evolution. The latter was monitored using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXS) and mechanical tests (tensile strength test). The effects of the composition of the soft segment on the phase separation and crystallization of the soft segment were analyzed in detail. It was found that the melting temperature of the crystalline phase increases with storage time, which is associated with hindering of the phase separation of the hard and soft segments of the TPU samples as it was detected by FTIR.

Mussel-inspired polyurethane coating for bio-surface functionalization to enhance substrate adhesion and cell biocompatibility

Considerable implant materials are prone to cause a severe inflammatory reaction due to poor histocompatibility, which leads to various complications and implant failure. Surface coating modification of these implant materials is one of the most important techniques to settle this problem. However, fabricating a coating with both adequate adhesiveness and excellent biocompatibility remains a challenge. Inspired by the adhesion mechanism of mussels, a series of mussel-inspired polyurethanes (PU-LDAs) were synthysized through a step growth polymerization based on hexamethylene diisocyanate as a hard segment, polytetra-methylene-ether-glycol as a soft segment, lysine-dopamine (LDA) and butanediol as chain extenders with different mole ratios.The coatings of PU-LDAs were applied to various substrates, such as stainless steel, glass and PP using a facile one-step coating process. The introduction of 3,4-dihydroxyphenylalanine (DOPA) groups can greatly improve the adhesion ability of the coatings to the substrates demonstrated by a 180° peel test. The peel strength of the PU-LDA100 coating containing high LDA content was 76.3, 48.5 and 67.5 N/m, which was 106.2%, 246.4% and 192.2% higher than that of the PU-LDA00 coating without LDA on the surface of stainless steel, glass and PP, respectively. Meanwhile, this PU coating has a lower immune inflammatory response which provides a universal method for surface modification of implant materials. Moreover, the DOPA groups in PU-LDAs could combine with the amino and thiol groups on cell membrane surface, leading to the improvement of cell adhesion and growth. Therefore, it has great potential application in the field of biomedical implant materials for the clinic.

NIR Photothermal-Responsive Shape Memory Polyurethane with Protein-Inspired Aggregated Chymotrypsin-Sensitive Degradable Domains

Biodegradable shape memory polymers are promising biomaterials for stents used in minimally invasive surgical procedures such as intestinal stents. Herein, a series of biodegradable shape memory polyurethanes (SMPUs) containing a novel phenylalanine-derived chain extender PHP were synthesized. Inspired by the fact that the function of biomacromolecules such as proteins is rich and varied because of the multiple combinations of the amino acid in highly evolved biosystems, we found that the sequence distribution of PHP in SMPU would also have a great influence on the phase structure and degradation behavior, especially the difference of surface morphology caused by degradation. Considering that the transition temperature (T_trans ) of SMPU we obtained is higher than physiological temperature, oxidized carbon black (OCB) with the ability of photothermal conversion was introduced into SMPU, which can not only endow SMPU with near-infrared response shape recovery characteristics, but also enhance phase separation degree and mechanical properties of them. SMPU/OCB composites show excellent shape memory effect and rapid photothermal response, and they can be degraded by chymotrypsin with an adjustable degradation rate. These SMPU/OCB composites show broad potential for application as intestinal stents. This article is protected by copyright. All rights reserved.

Recyclable Shape-Memory Waterborne Polyurethane Films Based on Perylene Bisimide Modified Polycaprolactone Diol

Currently, much attention is given to the functionality and recyclability of waterborne polyurethane (WPU). Herein, ε-caprolactone was used as a chain extender for grafting onto perylene bisimide (PBI) and 1,4-butanediol (BDO) via ring-opening reactions to obtain PBI-PCL and BDO- PCL. Then, two kinds of WPU, namely PBI-WPU (PWPU) and BDO-WPU (BWPU), were fabricated using PBI-PCL/polytetrahydrofuran ether glycol (PTMG) and BDO-PCL/PTMG, respectively, as mixed soft segments. The properties and appearance of PWPU and BWPU emulsions were analyzed in terms of particle size, zeta potential and TEM images, and the results showed that PWPU emulsions had uniform particle size distribution and decent storage stability. AFM and DMA results revealed that PWPU films possessed a more significant degree of microphase separation and a higher glass transition temperature (T_g) than BWPU films. The PWPU films displayed good shape-memory and mechanical properties, with tensile strength up to 58.25 MPa and elongation at break up to 1241.36%. TGA analysis indicated that PWPU films had better thermal stability than BWPU films. More importantly, the PWPU films could be dissolved in a mixed solvent of acetone/ethanol (v/v = 2:1) at room temperature. The dissolved PWPU could be dispersed in deionized water to prepare waterborne polyurethane again. After the recycling process was repeated three times, the recycled PWPU emulsion still exhibited good storage stability. The recycled PWPU films maintained their original thermal and mechanical properties. Comparing the properties of BWPU and PWPU showed that the soft segment structure had important influence on waterborne polyurethane performance. Therefore, PWPU may have great potential applications in making recycling and shape-memory coating or paint.

Tough and biodegradable polyurethane-curcumin composited hydrogel with antioxidant, antibacterial and antitumor properties

The functionalization of tough and biodegradable hydrogels is an important way to broaden their applications in biomedical field. However, most of the hydrophobic functional drugs are difficult to incorporate with the hydrogels. In this work, curcumin (Cur), a hydrophobic functional drug, was chosen to composite with polyurethane (PU) to obtain PU-Cur hydrogels by a direct and simple in-situ copolymerization. The incorporation of curcumin in PU hydrogel increases the crosslink but reduces the hydrophilicity and degradation rate of PU-Cur hydrogels. Thus, it can increase the mechanical strength to a maximum of 6.4±0.8 MPa and initial modulus to a maximum of 3.0±0.4 MPa. More importantly, curcumin incorporated in PU networks is not deactivated. The degradation products of PU-Curs at relatively low concentrations (2.5 mg/mL) can scavenge free radicals very efficiently (maximum over 90%), which exhibits strong antioxidant properties to improve wound healing. Moreover, based on the photochemical activity of curcumin, notable inhibition effects of the degradation products of PU-Curs against bacteria (maximum over 80%) and cancer cells are demonstrated with blue light treatment as a photodynamic therapy (PDT). Therefore, the beneficial effects of curcumin are retained in PU-Cur hydrogels, suggesting potential use as wound dressings or tumor isolation membranes. This work proposes a promising strategy to combine hydrophobic functional drugs with hydrophilic hydrogels for applications in a wide range of biomaterials.

Mechanically robust enzymatically degradable shape memory polyurethane urea with a rapid recovery response induced by NIR

NIR-light triggered shape memory process involving PU/gold-nanorod composites is shown.