The effect of nucleus pulposus crosslinking and glycosaminoglycan degradation on disc mechanical function

A Self-Polymerizing Mesh of Nano-Tethers for the Mechanical Constraint of Degraded Intervertebral Discs-A Review of 25 Years of Pre-Clinical and Early Clinical Research

Genipin polymers are self-forming tensile-load-carrying oligomers, derived from the gardenia fruit, that covalently bond to amines on collagen. The potential therapeutic mechanical benefits of a non-discrete in situ forming mesh of genipin oligomers for degraded spinal discs were first conceived in 1998. Over more than two decades, numerous studies have demonstrated the immediate mechanical effects of this injectable, intra-annular polymeric mesh including an early demonstration of an effect on clinical outcomes for chronic or recurrent discogenic low back pain. This literature review focused on articles investigating mechanical effects in cadaveric animal and human spinal discs, biochemical mechanism of action studies, articles describing the role of mechanical degradation in the pathogenesis of degenerative disc disease, initial clinical outcomes and articles describing current discogenic low back pain treatment algorithms. On the basis of these results, clinical indications that align with the capabilities of this novel injectable polymer-based treatment strategy are discussed. It is intended that this review of a novel nano-scale material-based solution for mechanical deficiencies in biologically limited tissues may provide a helpful example for other innovations in spinal diseases and similarly challenging musculoskeletal disorders.

Non-enzymatic glycation increases the failure risk of annulus fibrosus by predisposing the extrafibrillar matrix to greater stresses

Growing clinical evidence suggests a correlation between diabetes and more frequent and severe intervertebral disc failure, partially attributed to accelerated advanced glycation end-products (AGE) accumulation in the annulus fibrosus (AF) through non-enzymatic glycation. However, in vitro glycation (i.e., crosslinking) reportedly improved AF uniaxial tensile mechanical properties, contradicting clinical observations. Thus, this study used a combined experimental-computational approach to evaluate the effect of AGEs on anisotropic AF tensile mechanics, applying finite element models (FEMs) to complement experimental testing and examine difficult-to-measure subtissue-level mechanics. Methylglyoxal-based treatments were applied to induce three physiologically relevant AGE levels in vitro. Models incorporated crosslinks by adapting our previously validated structure-based FEM framework. Experimental results showed that a threefold increase in AGE content resulted in a ∼55% increase in AF circumferential-radial tensile modulus and failure stress and a 40% increase in radial failure stress. Failure strain was unaffected by non-enzymatic glycation. Adapted FEMs accurately predicted experimental AF mechanics with glycation. Model predictions showed that glycation increased stresses in the extrafibrillar matrix under physiologic deformations, which may increase tissue mechanical failure or trigger catabolic remodeling, providing insight into the relationship between AGE accumulation and increased tissue failure. Our findings also added to the existing literature regarding crosslinking structures, indicating that AGEs had a greater effect along the fiber direction, while interlamellar radial crosslinks were improbable in the AF. In summary, the combined approach presented a powerful tool for examining multiscale structure-function relationships with disease progression in fiber-reinforced soft tissues, which is essential for developing effective therapeutic measures. STATEMENT OF SIGNIFICANCE: Increasing clinical evidence correlates diabetes with premature intervertebral disc failure, likely due to advanced glycation end-products (AGE) accumulation in the annulus fibrosus (AF). However, in vitro glycation reportedly increases AF tensile stiffness and toughness, contradicting clinical observations. Using a combined experimental-computational approach, our work shows that increases in AF bulk tensile mechanical properties with glycation are achieved at the risk of exposing the extrafibrillar matrix to increased stresses under physiologic deformations, which may increase tissue mechanical failure or trigger catabolic remodeling. Computational results indicate that crosslinks along the fiber direction account for 90% of the increased tissue stiffness with glycation, adding to the existing literature. These findings provide insight into the multiscale structure-function relationship between AGE accumulation and tissue failure.

Effects of polycationic drug carriers on the electromechanical and swelling properties of cartilage

Cationic nanocarriers offer a promising solution to challenges in delivering drugs to negatively charged connective tissues, such as to articular cartilage for the treatment of osteoarthritis (OA). However, little is known about the effects that cationic macromolecules may have on the mechanical properties of cartilage at high interstitial concentrations. We utilized arginine-rich cationic peptide carriers (CPCs) with varying net charge (from +8 to +20) to investigate the biophysical mechanisms of nanocarrier-induced alterations to cartilage biomechanical properties. We observed that CPCs increased the compressive modulus of healthy bovine cartilage explants by up to 70% and decreased the stiffness of glycosaminoglycan-depleted tissues (modeling OA) by 69%; in both cases, the magnitude of the change in stiffness correlated with the uptake of CPC charge variants. Next, we directly measured CPC-induced osmotic deswelling in cartilage tissue due to shielding of charge repulsions between anionic extracellular matrix constituents, with magnitudes of reductions between 36 and 64 kPa. We then demonstrated that electrostatic interactions were required for CPC-induced stiffening to occur, evidenced by no observed increase in tissue stiffness when measured in hypertonic bathing salinity. We applied a non-ideal Donnan osmotic model (under triphasic theory) to separate bulk modulus measurements into Donnan and non-Donnan components, which further demonstrated the conflicting charge-shielding and matrix-stiffening effects of CPCs. These results show that cationic drug carriers can alter tissue mechanical properties via multiple mechanisms, including the expected charge shielding as well as a novel stiffening phenomenon mediated by physical linkages. We introduce a model for how the magnitudes of these mechanical changes depend on tunable physical properties of the drug carrier, including net charge, size, and spatial charge distribution. We envision that the results and theory presented herein will inform the design of future cationic drug-delivery systems intended to treat diseases in a wide range of connective tissues.

Regeneration of skeletal system with genipin crosslinked biomaterials

Natural biomaterials, such as collagen, gelatin, and chitosan, are considered as promising candidates for use in tissue regeneration treatment, given their similarity to natural tissues regarding components and structure. Nevertheless, only receiving a crosslinking process can these biomaterials exhibit sufficient strength to bear high tensile loads for use in skeletal system regeneration. Recently, genipin, a natural chemical compound extracted from gardenia fruits, has shown great potential as a reliable crosslinking reagent, which can reconcile the crosslinking effect and biosafety profile simultaneously. In this review, we briefly summarize the genipin extraction process, biosafety, and crosslinking mechanism. Subsequently, the applications of genipin regarding aiding skeletal system regeneration are discussed in detail, including the advances and technological strategies for reconstructing cartilage, bone, intervertebral disc, tendon, and skeletal muscle tissues. Finally, based on the specific pharmacological functions of genipin, its potential applications, such as its use in bioprinting and serving as an antioxidant and anti-tumor agent, and the challenges of genipin in the clinical applications in skeletal system regeneration are also presented.

Effects of Training and Overtraining on Intervertebral Disc Proteoglycans

STUDY DESIGN

Animal experimental study.

OBJECTIVE

Evaluate the effect of physical activity and overtraining condition on glycosaminoglycan concentration on the intervertebral disc (IVD) using a rat running model.

SUMMARY OF BACKGROUND DATA

Some guidelines recommend the implementation of a physical exercise program as treatment for low back pain; however, cyclic loading impact on the health of the IVD and whether there is a dose-response relationship is still incompletely understood.

METHODS

Thirty-two rats ages 8 weeks were divided into four groups with eight animals each. The first 8 weeks were the adaptive phase, the overtraining phase was from the ninth to the eleventh week, which consisted of increasing the number of daily training sessions from 1 to 4 and the recovery phase was represented by the 12th and 13th weeks without training. Control group 1 (CG1) did not undergo any kind of training. Control group 2 (CG2) completed just the adaptive phase. Overtraining group 1 (OT1) completed the overtraining phase. Overtraining group 2 (OT2) completed the recovery phase. Running performance tests were used to assess the "overtraining" status of the animals. IVD glycosaminoglycans were extracted and quantified, and identified by electrophoresis.

RESULTS

Glycosaminoglycans showed a distribution between chondroitin sulfate and dermatan sulfate. Glycosaminoglycans quantification showed decreasing concentration at the following order: OT1 > CG2 > OT2 > CG1. Increased expression of dermatan sulfate was verified at the groups submitted to any training.

CONCLUSION

Overtraining condition, as assessed by muscle and cardiovascular endurance did not lessen glycosaminoglycan concentration in the IVD. In fact, physical exercise increased glycosaminoglycan concentration in the IVD in proportion to the training load, even at overtraining condition, returning to normal levels after the recovery phase and glycosaminoglycan production is a reversible acute positive response for mechanical stimulation of the IVD.

LEVEL OF EVIDENCE

N/A.

Effects of Collagen Crosslink Augmentation on Mechanism of Compressive Load Sharing in Intervertebral Discs

Exogenous crosslinking has been shown to have potential for treating disc degeneration and back pain due to its ability to increase the strength and toughness of the annulus fibrosus, increase intervertebral joint stability, decrease intradiscal pressure, and increase fluid flow through the disc. Some results imply that crosslink augmentation may also lead to changes in the compressive load sharing properties of the disc. The objective of the present study was to evaluate directional stress distribution changes of the disc following genipin crosslinking treatment. Bovine lumbar motion segments were randomly divided into control and crosslinked groups. Annular strains were determined from simultaneous deformation measurements at various time points during compressive creep testing. Four stress components of the annulus were then calculated according to the previously measured modulus data. Immediately after the application of a 750-N compressive load, mean axial and radial compressive stresses in the crosslinked group were twofold higher than control means. Conversely, mean lamellae-aligned and circumferential tensile stresses of the crosslinked discs were 8- and threefold lower, respectively, compared to control means. After 1-h creep loading, the two compressive mean stresses in both the control and genipin-crosslinked specimens increased approximately threefold from their initial 750-N-loaded values. The two tensile mean stresses in the crosslinked group remained lower than the respective levels of the control means after creep loading. A greater proportion of annular compressive load support under compressive creep loading, with a commensurate decrease in both tensile stresses and strains, was seen in the discs following exogenous crosslink augmentation.

Microstructure analysis method for evaluating degenerated intervertebral disc tissue

Degeneration of intervertebral disc (IVD) tissue is characterized by several structural changes that result in variations in disc physiology and loss of biomechanical function. The complex process of degeneration exhibits highly intercorrelated biomechanical, biochemical, and cellular interactions. There is currently some understanding of the cellular changes in degenerated intervertebral disc tissue, but microstructural changes and deterioration of the tissue matrix has previously been rarely explored. In this work, sequestered IVD tissue was successfully characterized using histology, light microscopy, and scanning electron microscopy (SEM) to quantitatively evaluate parameters of interest for intervertebral disc degeneration (IDD) such as delamination of the collagenous matrix, cell density, cell size, and extra cellular matrix (ECM) thickness. Additional qualitative parameters investigated included matrix fibration and irregularity, neovascularization of the IVD, granular inclusions in the matrix, and cell cluster formation. The results of this study corroborated several previously published findings, including those positively correlating female gender and IVD cell density, age and cell size, and female gender and ECM thickness. Additionally, an array of quantitative and qualitative investigations of IVD degeneration could be successfully evaluated using the given methodology, resin-embedded SEM in particular. SEM is especially practical for studying micromorphological changes in tissue, as other microscopy methods can cause artificial tissue damage due to the preparation method. Investigation of the microstructural changes occurring in degenerated tissue provides a greater understanding of the complex process of disc degeneration as a whole. Developing a more complete picture of the degenerative changes taking place in the intervertebral disc is crucial for the advancement and application of regenerative therapies based on the pathology of intervertebral disc degeneration.

Organ culture bioreactors--platforms to study human intervertebral disc degeneration and regenerative therapy

In recent decades the application of bioreactors has revolutionized the concept of culturing tissues and organs that require mechanical loading. In intervertebral disc (IVD) research, collaborative efforts of biomedical engineering, biology and mechatronics have led to the innovation of new loading devices that can maintain viable IVD organ explants from large animals and human cadavers in precisely defined nutritional and mechanical environments over extended culture periods. Particularly in spine and IVD research, these organ culture models offer appealing alternatives, as large bipedal animal models with naturally occurring IVD degeneration and a genetic background similar to the human condition do not exist. Latest research has demonstrated important concepts including the potential of homing of mesenchymal stem cells to nutritionally or mechanically stressed IVDs, and the regenerative potential of "smart" biomaterials for nucleus pulposus or annulus fibrosus repair. In this review, we summarize the current knowledge about cell therapy, injection of cytokines and short peptides to rescue the degenerating IVD. We further stress that most bioreactor systems simplify the real in vivo conditions providing a useful proof of concept. Limitations are that certain aspects of the immune host response and pain assessments cannot be addressed with ex vivo systems. Coccygeal animal disc models are commonly used because of their availability and similarity to human IVDs. Although in vitro loading environments are not identical to the human in vivo situation, 3D ex vivo organ culture models of large animal coccygeal and human lumbar IVDs should be seen as valid alternatives for screening and feasibility testing to augment existing small animal, large animal, and human clinical trial experiments.

Exogenous Crosslinking Restores Intradiscal Pressure of Injured Porcine Intervertebral Discs: An In Vivo Examination Using Quantitative Discomanometry

STUDY DESIGN

In vivo examination of intradiscal pressure by quantitative discomanometry (QD).

OBJECTIVE

To determine whether an injectable, exogenous crosslinking could acutely restore intradiscal pressure of stab-injured discs in vivo by short-term treatment.

SUMMARY OF BACKGROUND DATA

Disc biomechanical performance depends on its integrity associated with the intradiscal pressure and mechanical properties. Genipin crosslink augmentation has demonstrated the in vitro biomechanical capability to improve intervertebral joint stability and increase mechanical properties of the annulus fibrosus.

METHODS

4 lumbar discs on each of 8 swine were randomly assigned to 4 groups: intact, injured, untreated, and crosslinked. A 16G needle was stabbed into the annulus fibrosus to create the disc injury model. An injection of 0.33% genipin solution was delivered into the annulus to treat the injury. QD technique was performed to examine the intradiscal pressure for the intact and injured discs at the time of surgery, while untreated and crosslinked discs were measured 1-week postsurgery. 4 QD parameters were analyzed and compared across the 4 groups: leakage pressure and volume, and saturation pressure and volume.

RESULTS

The leakage and saturation pressures of the injured group were significantly lower than those of the intact group (P = 0.004 and P = 0.01, respectively). The leakage and saturation pressures of untreated discs were statistically equivalent to the injured levels, but with a 2-times higher saturation volume. Relative to the untreated group, the leakage pressure and saturation pressure of genipin-crosslinked discs had a 617% (P = 0.008) and a 473% increase (P = 0.007), respectively.

CONCLUSION

A large disc injury produced by annular puncture immediately lowered intradiscal pressure when left untreated. Genipin crosslinking can restore intradiscal pressure acutely in vivo without any obvious morbidity associated with the injection.

Characterisation of porcine dermis scaffolds decellularised using a novel non-enzymatic method for biomedical applications

Off-the-shelf availability of tissue-engineered skin constructs, tailored by different combinations of reagents to produce a highly preserved biological matrix is often the only means to help patients suffering skin damage. This study assessed the effect of five different decellularisation methods on porcine dermal scaffolds with regard to matrix composition, biomechanical strength, and cytotoxicity using an in vitro biocompatibility assay. Results demonstrated that four out of the five tested decellularisation protocols were efficient in producing acellular scaffolds. Nevertheless, decellularisation method using osmotic shock without enzymatic digestion showed to be efficient not only in removing cellular material and debris from dermal scaffolds but was also beneficial in the preservation of extracellular matrix components (glycosaminoglycans and collagen). Histological assessment revealed that the dermal architecture of coarse collagen bundles was preserved. Examinations by scanning electron microscopy and transmission electron microscopy showed that the arrangement and ultrastructure of collagen fibrils in the scaffolds were retained following non-enzymatic method of decellularisation and also after collagen crosslinking using genipin. Moreover, this decellularised scaffold was not only shown to be biologically compatible when co-cultured with bone marrow-derived mesenchymal stem cells and fibroblasts, but also stimulated the cells to release trophic factors essential for tissue regeneration.

Biomechanical Comparison of 2 Different Pedicle Screw Systems During the Surgical Correction of Adult Spinal Deformities

STUDY DESIGN

A biomechanical spine model was used to evaluate the impact of screw design on screw-vertebra interface loading during simulated surgical corrections of adult scoliosis.

OBJECTIVES

To evaluate differences in screw-vertebra interface forces during adult scoliosis correction between favored angle (FA) screws with extension tabs and standard polyaxial screws while varying deformity severity and curve rigidity.

SUMMARY OF BACKGROUND DATA

Pedicle screws enable surgeons to safely and effectively realign spinal deformities. The risk of perioperative screw pullout increases when presented with adult deformities that have less flexible spines and lower bone mineral density. An FA screw with reduction tabs is believed to enable surgical techniques permitting load distribution on multiple screws, thereby reducing screw pullout potential.

METHODS

The researchers constructed 3 finite element spine models from adult scoliosis patients. Mechanical properties of intervertebral discs were modeled to reflect less flexible adult spines and their stiffness was varied to evaluate impact on screw-vertebra forces. Models simulated scoliosis surgery according to clinical data using FA or polyaxial screws. Forces measured at the screw-vertebra interface were monitored and compared for each patient with FA and then polyaxial screws.

RESULTS

Simulations using FA screws reduced screw-vertebra interface forces significantly compared with polyaxial screws. Favored angle screws caused 18%, 14%, and 16% reductions in peak forces and 29%, 35%, and 22% reductions in average forces compared with polyaxial screws for patients 1, 2, and 3, respectively. Favored angle screws also provided consistent relative reduction in average forces by 28% when varying properties of intervertebral discs among 8, 10, and 12 MPa.

CONCLUSIONS

Using a virtual finite element platform, FA screws reduced screw-vertebra interface forces encountered during simulated correction of less flexible adult scoliosis compared with standard polyaxial screws. These results show a potential benefit of using this modified screw design to reduce screw-vertebra forces and potential intraoperative pullout failures.

Rheological and dynamic integrity of simulated degenerated disc and consequences after cross-linker augmentation

STUDY DESIGN

An in situ study using whole-organ culture system.

OBJECTIVE

To study the effect of disc degeneration at different stages on its rheological and dynamic properties and to investigate the efficacy of exogenous cross-linking therapy.

SUMMARY OF BACKGROUND DATA

Disc degeneration can involve protein denaturation or microdefects to the disc's collagen fiber network. A disc degeneration model using whole-organ culture technique can be effectively used for the screening of treatments of degenerated discs. Exogenous cross-linking therapy has been shown to enhance the mechanical properties of the disc by cross-linking collagen. However, the efficacy of this therapy on the degenerated disc is unclear.

METHODS

A total of 40 porcine thoracic discs were assigned to 5 groups: intact discs, moderately degenerated discs, moderately degenerated discs with cross-linker augmentation, severely degenerated discs, and severely degenerated discs with cross-linker augmentation. The disc degeneration was simulated by trypsin digestion and mechanical fatigue loading. Rheological properties, dynamic properties, water content, and histological analysis were conducted after a 7-day incubation.

RESULTS

The mechanical properties of moderate degenerated discs significantly decrease both in rheological and dynamic properties, and laminate structure disorganization was observed. Mechanical defects of severely degenerated discs resulted in disc height loss, an increase in the aggregate modulus and stiffness modulus, and a decrease in the damping coefficient, hydraulic permeability, and water content. Cross-linker augmentation significantly recovered mechanical properties of moderately degenerated discs and restored the water content compared with the intact disc. However, the augmentation did not fully repair the severely degenerated discs.

CONCLUSION

Trypsin-induced extracellular matrix damage resulted in a change of the disc's biomechanics. Cross-linker augmentation recovers the rheological and dynamic properties of moderately degenerated discs but not of the severely degenerated discs. The genipin cross-linker may be able to improve the proteoglycan depletion effect in the nucleus pulposus but may not be effective to restore the structural damage in the collagen molecule of the anulus fibrosus.

Changes in the interfacial shear resistance of disc annulus fibrosus from genipin crosslinking

Crosslinking soft tissue has become more common in tissue engineering applications, and recent studies have demonstrated that soft tissue mechanical behavior can be directly altered through crosslinking. Using a recently reported test method that shears adjacent disc lamella, the effect of genipin crosslinking on interlamellar shear resistance was studied using in vitro bovine disc annulus. Specimens of adjacent lamella were dissected from four discs taken from three fresh frozen bovine tails. These specimens were paired and soaked in either 50 mM EPPS Phosphate (ph9) with 20 mM genipin at 37 °C for 4 h or in 50 mM EPPS Phosphate (ph9) of which twelve specimens (6 per treatment) were successfully tested and analyzed. Crosslinked specimens were noted to have significantly higher yield force per width (59%), peak force per width (70%), and resilience (69%) compared to sham treated controls, supporting the hypothesis that genipin crosslinking increases the resistance to interlamellar shear of the annulus interface. Additionally, a possible dependency may exist between the interlamellar shear strength and neighboring lamella because of the bridging fiber network previously described by other investigators.

Genipin as a sporicidal agent for the treatment of cortical bone allografts

Introduction

Microbial bioburden in bone allografts can be reduced by gamma radiation; however, the radiation compromises collagen and increases the risk of graft failure. Genipin is an agent that may reduce bioburden by chemical crosslinking without causing mechanical detriment or cytotoxicity.

Methods

To evaluate genipin’s ability to penetrate cortical bone while maintaining sporicidal activity, Bacillus subtilis spore strips were isolated between slices of bovine femoral cortical bone and immersed in genipin solutions for up to one week; spore viability was assessed with media-based assays. The mechanical effects of genipin treatment were assessed by performing three-point bending tests on genipin-treated cortical beams. Cytotoxicity studies were conducted by evaluating the adhesion and proliferation of murine MC3T3-E1 (P21) preosteoblasts on cortical bone slices which were treated with genipin and rinsed to different extents.

Results

Genipin successfully penetrated cortical bone slices and sterilized B. subtilis populations after 48 hours ( p > 0.05) and one week ( p < 0.05). Genipin-treated cortical beams demonstrated dose-dependent increases in yield strain ( p = 0.02) and resilience ( p < 0.01), whereas other mechanical properties were not affected by genipin treatment. Seeding cells onto inadequately rinsed genipin-treated bones proved cytotoxic. However, with adequate post-treatment rinsing of the residual genipin, cell adhesion and proliferation was comparable to phosphate-buffered saline-treated controls (no genipin).

Conclusions

Genipin solutions can sterilize bacterial spore populations entrapped within the continuum of bone tissue while preserving mechanical properties of bone and allowing cell adhesion and proliferation. Provided that antimicrobial effects seen with bacterial spores extend broadly to all microbial and viral species, genipin holds strong potential for bone allograft sterilization.

The dose response relationship between intervertebral disc flexion-extension neutral zone metrics and injected genipin concentration

PURPOSE

Quantify changes in the flexion--extension neutral zone of the intervertebral disc with injections of increasing genipin concentration.

METHODS

Bovine motion segments were treated with varying concentrations of genipin using bilateral injections of constant volume. After overnight static compression loading of the treated segments, anterior-posterior offset loading was used to simulate flexion-extension motion. Range of motion, neutral zone length, neutral zone stiffness, and an instability score were measured.

RESULTS

Injection of the disc annulus with increasing concentrations of genipin resulted in corresponding changes in flexion-extension neutral zone. A minimum concentration of 40 mM was needed to observe a significant change. The largest changes were observed with the 400 mM injection. Netural zone stability was the most sensitive of the metrics with a percent change of 48% at 40 mM and over 200% at 400 mM.

CONCLUSION

This study establishes the efficacy of using injection delivery to affect disc joint mechanics and quantifies the dose response between injected genipin and the flexion-extension stability of the disc.

The regional contribution of glycosaminoglycans to temporomandibular joint disc compressive properties

Understanding structure-function relationships in the temporomandibular joint (TMJ) disc is a critical first step toward creating functional tissue replacements for the large population of patients suffering from TMJ disc disorders. While many of these relationships have been identified for the collagenous fraction of the disc, this same understanding is lacking for the next most abundant extracellular matrix component, sulfated glycosaminoglycans (GAGs). Though GAGs are known to play a major role in maintaining compressive integrity in GAG-rich tissues such as articular cartilage, their role in fibrocartilaginous tissues in which GAGs are much less abundant is not clearly defined. Therefore, this study investigates the contribution of GAGs to the regional viscoelastic compressive properties of the temporomandibular joint (TMJ) disc. Chondroitinase ABC (C-ABC) was used to deplete GAGs in five different disc regions, and the time course for >95% GAG removal was defined. The compressive properties of GAG depleted regional specimens were then compared to non-treated controls using an unconfined compression stress-relaxation test. Additionally, treated and non-treated specimens were assayed biochemically and histologically to confirm GAG removal. Compared to untreated controls, the only regions affected by GAG removal in terms of biomechanical properties were in the intermediate zone, the most GAG-rich portion of the disc. Without GAGs, all intermediate zone regions showed decreased tissue viscosity, and the intermediate zone lateral region also showed a 12.5% decrease in modulus of relaxation. However, in the anterior and posterior band regions, no change in compressive properties was observed following GAG depletion, though these regions showed the highest compressive properties overall. Although GAGs are not the major extracellular matrix molecule of the TMJ disc, they are responsible for some of the viscoelastic compressive properties of the tissue. Furthermore, the mechanical role of sulfated GAGs in the disc varies regionally in the tissue, and GAG abundance does not always correlate with higher compressive properties. Overall, this study found that sulfated GAGs are important to TMJ disc mechanics in the intermediate zone, an important finding for establishing design characteristics for future tissue engineering efforts.

Sporicidal efficacy of genipin: a potential theoretical alternative for biomaterial and tissue graft sterilization

Terminal sterilization of musculoskeletal allografts by gamma radiation minimizes the risk of disease transmission but impairs allograft mechanical properties. Commonly employed crosslinking agents can sterilize tissues without affecting mechanical properties adversely; however, these agents are toxic. Genipin is reported to be a benign crosslinking agent that strengthens mechanical properties of tissues; however, the antimicrobial capacity of genipin is largely unknown. The present study's aims were: (1) to assess the sporicidal potential of genipin, (2) to improve antimicrobial capacity by changing chemical and physical treatment conditions. To establish genipin's sterilization potential Bacillus subtilis var. niger spore strips were treated with 0-10% genipin in PBS or in 1:1 DMSO:PBS up to 72 h at room temperature (RT). Sterilizing doses and concentrations of genipin were used to treat B. pumilus and Geobacillus stearothermophilus spores to assess broader spectrum sporicidal activity of genipin. Scanning electron microscopy (SEM) was performed to evaluate gross morphological changes after genipin treatment. Optimal sterilization conditions were determined by evaluating the effects of temperature (RT-50 °C), DMSO:PBS ratio (0:100-100:0), and treatment duration (24-72 h) on B. subtilis. Genipin penetration of full thickness bovine patellar tendon and cortical bone specimens was observed to assess the feasibility of the agent for treating grafts. Initial studies showed that after 72 h of treatment at RT with 0.63-10% genipin/DMSO:PBS B. subtilis spore strips were sterilized; 0.63% genipin/PBS did not sterilize spore strips at 72 h at RT. Genipin doses and concentrations that sterilized B. subtilis spore strips sterilized B. pumilus and G. stearothermophilus spore strips. SEM revealed no gross morphological differences between untreated and treated spores. Treatment optimization resulted in sterilization within 24 h with 100% PBS, and DMSO facilitated sporicidal activity. Genipin penetrated full thickness patellar tendon specimens and 3.72 ± 0.58 mm in cortical bone specimens. Genipin sterilizes B. subtilis, B. pumilus, and G. stearothermophilus spore strips. It penetrates soft and hard tissues at doses previously shown to be non-toxic and to improve mechanical strength in collagen-rich soft tissues. Further studies are indicated to assess genipin's effects on the mechanical properties of genipin-sterilized grafts, the ability of genipin to eradicate infectious species other than spores, and to assess whether sterilant activity persists after penetrating tissues and biomaterials.

Differential cross-linking and radio-protective effects of genipin on mature bovine and human patella tendons

Gamma irradiation is a proven sterilization method, but is not widely used on allografts for anterior cruciate ligament reconstruction (e.g., patella tendon) due to radiation-induced decreases in mechanical strength. Addressing this drawback would improve the safety and supply of allografts to meet current and future demand. It was hypothesized that genipin-induced collagen cross-linking would increase the tensile modulus of patella tendon tissue such that 5 MRad gamma irradiation would not reduce the tissue mechanical strength below the original untreated values. Optimized genipin treatment increased the tensile modulus of bovine tendons by ~2.4-fold. After irradiation, genipin treated tissue did not significantly differ from native tissue, proving the hypothesis. Optimized genipin treatment of human tendons increased the tensile modulus by ~1.3-fold. After irradiation, both control and genipin-treated tissues possessed ~50-60% of their native tendon modulus, disproving the hypothesis. These results highlight possible age- and species- dependent effects of genipin cross-linking on tendon tissue. Cross-linking of human allografts may be beneficial only in younger donor tissues. Future research is warranted to better understand the mechanisms and applications of collagen cross-linking for clinical use.

Potential of collagen cross-linking therapies to mediate tendon mechanical properties

Collagen cross-links are fundamental to the mechanical integrity of tendon, with orderly and progressive enzymatic cross-linking being central to healthy development and injury repair. However, the nonenzymatic cross-links that form as we age are associated with increased tendon brittleness, diminished mechanical resistance to injury, and impaired matrix remodeling. Collagen cross-linking thus sits at the center of tendon structure and function, with important implications to age, disease, injury, and therapy. The current review touches on these aspects from the perspective of their potential relevance to the shoulder surgeon. We first introduce the most well-characterized endogenous collagen cross-linkers that enable fibrillogenesis in development and healing. We also discuss the glycation-mediated cross-links that are implicated in age- and diabetes-related tendon frailty and summarize work toward therapies against these disadvantageous cross-links. Conversely, we discuss the introduction of exogenous collagen cross-links to augment the mechanical properties of collagen-based implants or native tendon tissue. We conclude with a summary of our early results using exogenous collagen cross-linkers to prevent tendon tear enlargement and eventual failure in an in vitro model of partial tendon tear.

Optimization of protein crosslinking formulations for the treatment of degenerative disc disease

STUDY DESIGN

Biochemical studies aimed at optimization of protein crosslinking formulations for the treatment of degenerative disc disease and subsequent biomechanical testing of tissues treated with these formulations.

OBJECTIVE

To optimize protein crosslinking formulations for treatment of degenerating spinal discs.

SUMMARY OF BACKGROUND DATA

Nonsurgical exogenous crosslinking therapy is a potential new, noninvasive technology for the treatment of degenerative disc disease. The technology is based on the injection of protein crosslinking reagents into the pathologic disc to restore its mechanical properties and also to potentially increase the permeability of the tissue and so facilitate the exchange of waste products and nutrients.

METHODS

Diffusion of genipin (GP) was monitored following injection into spinal discs and the effects of surfactants on diffusion studied. Formulations for GP and methylglyoxal (MG) were biochemically optimized and used to treat bovine spinal discs. Their effects on bovine anulus tissue were evaluated using a circumferential tensile test, while the GP formulation was also tested with respect to its ability to reduce disc bulge under load.

RESULTS

GP exhibited a distinct time-dependent diffusion and sodium-dodecyl-sulfate, but not Tween-20, enhanced diffusion by 30%. Two crosslinkers, GP and MG, were inhibited by amines but enhanced by phosphate ions. Both formulations could enhance a number of physical parameters of bovine anulus tissue, while the GP formulation could reduce disc bulge following injections into spinal discs.

CONCLUSION

Formulations lacking amines and containing phosphate ions appear to be promising candidates for clinical use of the crosslinkers GP and MG.

The effects of needle puncture injury on microscale shear strain in the intervertebral disc annulus fibrosus

BACKGROUND CONTEXT

Needle puncture of the intervertebral disc (IVD) is required for delivery of therapeutic agents to the nucleus pulposus and for some diagnostic procedures. Needle puncture has also been implicated as an initiator of disc degeneration. It is hypothesized that needle puncture may initiate IVD degeneration by altering microscale mechanical behavior in the annulus fibrosus (AF).

PURPOSE

Quantify the changes in AF microscale strain behavior resulting from puncture with a hypodermic needle.

STUDY DESIGN

Cadaveric IVD tissue explant study.

METHODS

Annulus fibrosus explants from bovine caudal IVDs that had been punctured radially with hypodermic needles were loaded in dynamic sinusoidal shear while being imaged with a confocal microscope. Digital image analysis was used to quantify local tissue strain and damage propagation with repeated shearing.

RESULTS

Needle puncture changed the distribution of microscale shear strains in the AF under load from homogenous (equal to far field) to a distinct pattern of high (4× far field) and low (0.25× far field) strain areas. Repeated loading did not cause further growth of the disruption beyond the second cycle.

CONCLUSIONS

Needle puncture results in a drastic alteration of microscale strain behavior in the AF under load. This alteration may directly initiate disc degeneration by being detrimental to tissue-cell mechanotransduction.

The effects of exogenous crosslinking on hydration and fluid flow in the intervertebral disc subjected to compressive creep loading and unloading

STUDY DESIGN

In vitro study of genipin crosslinking effect on disc water content changes under compressive loading and unloading.

OBJECTIVE

To investigate the influence of collagen crosslinking on hydration and fluid flow in different regions of intact discs, and to evaluate the nutritional implications.

SUMMARY OF BACKGROUND DATA

Age-related reductions of nutrient supply and waste product removal are critically important factors in disc pathogenesis. Diffusion and fluid flow are blocked by subchondral bone thickening, cartilaginous endplate calcification, loss of hydrophilic proteoglycans, and clogging of anular pores by degraded matrix molecules. Previous studies demonstrated increased hydraulic permeability and macromolecular transport through crosslinked collagenous matrices. Genipin has also demonstrated the capability to increase retention of proteoglycans.

METHODS

A total of 57 bovine lumbar motion segments were divided randomly into phosphate buffered saline and 0.33% genipin-soaked treatment groups. Water content changes were measured using a mass-loss technique in 3 intervertebral disc regions following successive stages of compressive loading and unloading (post-treatment, after 1 hour 750 N compression, and after a subsequent 24-hour period of nominal loading). Net flow of fluid into or out of a region was determined from the percentage change in mean water content from successive groups.

RESULTS

Fluid flow to and from the nucleus doubled with genipin crosslinking. Relative to the buffer-only controls, overall net fluid flow increased 103% in the nucleus pulposus, 36% in the inner anulus, and was 31% less in the outer anulus of genipin treated discs.

CONCLUSION

The effects of genipin crosslinking on matrix permeability and proteoglycan retention can alter hydration levels and fluid flow in the intervertebral disc. Resulting increases in fluid flow, including a doubling of flow to and from the nucleus, could lead to enhanced nutritional inflow and waste product outflow for the disc, and may have implications for emerging cell-based therapies.

Kinetic characterization and comparison of various protein crosslinking reagents for matrix modification

We have characterized the relative efficacies of a number of protein crosslinking agents that have the potential for use in the crosslinking of proteinaceous matrices both in vitro and in vivo. The crosslinkers tested were; L: -threose (LT), Genipin (GP), Methylglyoxal (MG), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), proanthrocyanidin (PA) and glutaraldehyde (GA). The relative effectiveness of the crosslinkers with regard to their saturating concentrations was: GA > PA > EDC > MG = GP >> LT. Most of the crosslinkers displayed a pH dependence and were more effective at more alkaline pH. At optimal pH and saturating conditions, the relative reaction rates of the crosslinkers were: PA = GA > EDC > GP > MG >> LT.

The influence of exogenous cross-linking and compressive creep loading on intradiscal pressure

This study involves a biomechanical evaluation of a prospective injectable treatment for degenerative discs. The high osmolarity of the non-degenerated nucleus pulposus attracts water contributing to the hydrostatic behavior of the tissue. This intradiscal pressure is known to drop as fluid is exuded from the matrix due to compressive loading. The objective of this study was to compare the changes in intradiscal pressure in control and genipin cross-linked intervertebral discs. Thirty bovine lumbar motion segments were randomly divided into a phosphate-buffered saline control group and a 0.33% genipin group and soaked at room temperature for 2 days. A needle pressure sensor was held in the center of the disc while short-term and static creep compressive loads were applied. The control group demonstrated a 25% higher average intradiscal pressure compared to genipin-treated discs under 750 N compressive load (p=0.029). Depressurization during static compressive creep was 56% higher in the control than in the genipin group (p=0.014). These results suggest cross-linking induced changes in the poroelastic properties of the involved tissues affected the mechanics of compressive load support in the disc with lower levels of nucleus pressure, a corresponding decrease in the elastic expansion of the annulus, and an increased axial compressive loading of the inner and outer annulus tissues. It is possible that concurrent changes in hydraulic permeability and proteoglycan retention known to be associated with genipin cross-linking were also contributors to poroelastic changes. Reduction of peak pressures and moderation of pressure fluctuations could be beneficial relative to discogenic pain.

Effects of enzymatic digestion on compressive properties of rat intervertebral discs

Enzymatic treatments were applied to rat motion segments to establish structure-function relationships and determine mechanical parameters most sensitive to simulated remodeling and degeneration. Rat caudal and lumbar disc biomechanical behaviors were evaluated to improve knowledge of their similarities and differences due to their frequent use during in vivo models. Caudal motion segments were assigned to four groups: soaked (control), genipin treated, elastase treated, and collagenase treated. Fresh lumbar and caudal discs were also compared. The mechanical protocol involved five force-controlled loading stages: equilibration, cyclic compression-tension, quasi-static compression, frequency sweep, and creep. Crosslinking was found to have the greatest effect on IVD properties at resting stress. Elastin's role was greatest in tension and at higher force conditions, where GAG content was also a contributing factor. Collagenase treatment caused tissue compaction, which impacted mechanical properties at both high and low force conditions. Equilibration creep and cyclic compression-tension tests were the mechanical tests most sensitive to alterations in specific matrix constituents. Caudal and lumbar motion segments had many similarities but biomechanical differences suggested some distinctions in collagenous structure and water transport characteristics in addition to the geometric differences. Results provide a basis for interpreting biomechanical changes observed in animal model studies of degeneration and remodeling, and underscore the need to maintain and/or repair collagen integrity in IVD health and disease.

The effect of nucleus implant parameters on the compressive mechanics of the lumbar intervertebral disc: a finite element study

A simplified finite element model of the human lumbar intervertebral disc was utilized for understanding nucleus pulposus implant mechanics. The model was used to assess the effect of nucleus implant parameter variations on the resulting compressive biomechanics of the lumbar anterior column unit. The effects of nucleus implant material (modulus and Poisson's ratio) and geometrical (height and diameter) parameters on the mechanical behavior of the disc were investigated. The model predicted that variations in implant modulus contribute less to the compressive disc mechanics compared to the implant geometrical parameters, for the ranges examined. It was concluded that some threshold exists for the nucleus implant modulus, below which little variations in load-displacement behavior were shown. Compressive biomechanics were highly affected by implant volume (under-filling the nucleus cavity, line-to-line fit, or over-filling the nucleus cavity) with a greater restoration of compressive mechanics observed with the over-filled implant design. This work indicated the effect of nucleus implant parameter variations on the compressive mechanics of the human lumbar intervertebral disc and importance of the "fit and fill" effect of the nuclear cavity in the restoration of the human intervertebral disc mechanics in compression. These findings may have clinical significance for nucleus implant design.

Cellular mechanobiology of the intervertebral disc: new directions and approaches

The more we learn about the intervertebral disc (IVD), the more we come to appreciate the intricacies involved in transmission of forces through the ECM to the cell, and in the biological determinants of its response to mechanical stress. This review highlights recent developments in our knowledge of IVD physiology and examines their impact on cellular mechanobiology. Discussion centers around the continually evolving cellular and microstructural anatomy of the nucleus pulposus (NP) and the annulus fibrosus (AF) in response to complex stresses generated in support of axial load and spinal motion. Particular attention has been given to cells from the immature NP and the interlamellar AF, and assessment of their potential mechanobiologic contributions to the health and function of the IVD. In addition, several innovative approaches that have been brought to bear on studying the interplay between disc cells and their micromechanical environment are discussed. Techniques for "engineering" cellular function and technologies for fabricating more structurally defined biomaterial scaffolds have recently been employed in disc research. Such tools can be used to elucidate the biological and physical mechanisms by which different IVD cell populations are regulated by mechanical stress, and contribute to advancement of preventative and therapeutic measures.

Biomechanical and biologic effects of meniscus stabilization using triglycidyl amine

The susceptibility of meniscus allografts to enzymatic degradation may be reduced through tissue stabilization. We have previously reported on an epoxide-based crosslinker, triglycidyl amine (TGA), which can be used alone or with a bisphosphonate (MABP) to stabilize heterograft heart valves and reduce their pathologic calcification. Our objective was to evaluate the effects of TGA and TGA-MABP pretreatment on an orthopedic allograft involving meniscus crosslinking, degradation, calcification, and compressive properties. Ovine menisci treated with TGA or TGA-MABP for up to seven days and glutaraldehyde crosslinked controls were examined in vitro for degree of crosslinking, resistance to degradation by collagenase, and material property changes. Likewise treated menisci were implanted in rats for eight weeks and examined for calcium content and biomechanical changes. TGA treatment for three days significantly reduced collagen loss by 88% and increased thermal denaturation temperatures (Ts) above 80 degrees C versus Ts of 70 degrees C or less for non-crosslinked meniscus. In vitro, TGA and TGA-MABP significantly increased aggregate modulus by 19% and 32% compared to native controls, respectively. TGA decreased permeability by 53% while TGA-MABP increased it by 303%. In vivo, TGA significantly reduced explant calcification by 42% compared to glutaraldehyde, and including MABP reduced it by 90%. Analyses revealed that TGA and TGA-MABP stabilized menisci had significantly lower modulus and permeability values than glutaraldehyde controls by at least 28% and 86%, respectively. It is concluded that TGA crosslinking of meniscus increases resistance to both collagenase degradation and pathologic calcification, while demonstrating comparable or improved biomechanical properties versus glutaraldehyde controls.

Neurite growth in 3D collagen gels with gradients of mechanical properties

We have designed and developed a microfluidic system to study the response of cells to controlled gradients of mechanical stiffness in 3D collagen gels. An 'H'-shaped, source-sink network was filled with a type I collagen solution, which self-assembled into a fibrillar gel. A 1D gradient of genipin--a natural crosslinker that also causes collagen to fluoresce upon crosslinking--was generated in the cross-channel through the 3D collagen gel to create a gradient of crosslinks and stiffness. The gradient of stiffness was observed via fluorescence. A separate, underlying channel in the microfluidic construct allowed the introduction of cells into the gradient. Neurites from chick dorsal root ganglia explants grew significantly longer down the gradient of stiffness than up the gradient and than in control gels not treated with genipin. No changes in cell adhesion, collagen fiber size, or density were observed following crosslinking with genipin, indicating that the primary effect of genipin was on the mechanical properties of the gel. These results demonstrate that (1) the microfluidic system can be used to study durotactic behavior of cells and (2) neurite growth can be directed and enhanced by a gradient of mechanical properties, with the goal of incorporating mechanical gradients into nerve and spinal cord regenerative therapies.

The role of spinal concave-convex biases in the progression of idiopathic scoliosis

Inadequate understanding of risk factors involved in the progression of idiopathic scoliosis restrains initial treatment to observation until the deformity shows signs of significant aggravation. The purpose of this analysis is to explore whether the concave-convex biases associated with scoliosis (local degeneration of the intervertebral discs, nucleus migration, and local increase in trabecular bone-mineral density of vertebral bodies) may be identified as progressive risk factors. Finite element models of a 26 degrees right thoracic scoliotic spine were constructed based on experimental and clinical observations that included growth dynamics governed by mechanical stimulus. Stress distribution over the vertebral growth plates, progression of Cobb angles, and vertebral wedging were explored in models with and without the biases of concave-convex properties. The inclusion of the bias of concave-convex properties within the model both augmented the asymmetrical loading of the vertebral growth plates by up to 37% and further amplified the progression of Cobb angles and vertebral wedging by as much as 5.9 degrees and 0.8 degrees, respectively. Concave-convex biases are factors that influence the progression of scoliotic curves. Quantifying these parameters in a patient with scoliosis may further provide a better clinical assessment of the risk of progression.

Effects of laser irradiation on collagen organization in chemically induced degenerative annulus fibrosus of lumbar intervertebral disc

BACKGROUND AND OBJECTIVE

The number of in vitro experimental studies was carried out with the use of intact tissues to establish a mechanism of laser-tissue interaction. However, in the process of degeneration, both biochemical composition and behavior of the disc were altered drastically. The objective of this study was to evaluate the role of the main matrix components in laser modification of annulus fibrosus (AF) under IR laser irradiation.

STUDY DESIGNS/MATERIALS AND METHODS

The samples of AF in a motion segment after hyaluronidase treatment, trypsin digestion and glycation by glyceraldehyde were heated in hydrothermal bath (95 degrees C, 2 min) or irradiated by laser at 1.56 microm. Specimens were imaged by cross-polarization optical coherence tomography (CP-OCT), and then analyzed by differential scanning calorimery (DSC).

RESULTS AND DISCUSSION

According to CP-OCT and DSC data non-significant alteration was revealed in AF after hyaluronidase treatment, glycation led to stabilization of annulus collagen and trypsin digestion resulted in a noticeable impairment of collagen fibrils. Laser treatment induced subsequent damages of AF matrix but these damages cannot be explained by laser heating only. The specificity of chemical modification of AF matrix has an influence on a character of collagen network alteration due to IR laser effect. Minimal and maximal alterations are observed for hyaluronidase and trypsin treated samples respectively. Glyceraldehyde fixed samples showed failure of the collagen structure after moderate laser treatment; at the same time thermal denaturation of collagen macromolecules was negligible. We assume that a mechanical effect of laser irradiation plays an important role in laser-induced annulus collagen modification and propose the scheme of physico-chemical process occurring under non-uniform IR laser treatment in AF tissue.

CONCLUSION

CP-OCT and DSC techniques allow us to record the alteration of collagen network organization as a result of chemical modification. There were detected significant and specific effects of the biochemical composition and material properties on the response of AF collagen network on laser irradiation. The results go in accordance with our hypothesis that the primary effect of laser influence on collagen network under tension is the mechanical damage of collagen fiber.

Comparison of animal discs used in disc research to human lumbar disc: axial compression mechanics and glycosaminoglycan content

STUDY DESIGN

Experimental measurement and normalization of in vitro disc axial compression mechanics and glycosaminoglycan and water content for several animal species used in intervertebral disc research.

OBJECTIVE

To compare normalized axial mechanical properties and glycosaminoglycan and water content from other species to those of the human disc to aid in selection and interpretation of results in animal disc studies.

SUMMARY OF BACKGROUND DATA

There is a lack of mechanical and biochemical comparative data from animal intervertebral discs with respect to the human disc.

METHODS

Intervertebral disc axial mechanical properties, glycosaminoglycan, and water content were evaluated for 9 disc types in 7 mammalian species: the calf, pig, baboon, sheep, rabbit, rat and mouse lumbar, and the cow and rat tail. Disc area and height were used for calculation of the normalized mechanical parameters. Glycosaminoglycan content was normalized by dry weight.

RESULTS

Many directly measured mechanical parameters varied by orders of magnitude. However, these parameters became comparable and often did not show significant differences after geometric normalization. Both glycosaminoglycan and water content revealed similarity across species.

CONCLUSION

Disc axial mechanics are very similar across animal species when normalizing by the geometric parameters of disc height and area. This suggests that the disc tissue material properties are largely conserved across animal species. These results provide a reference to compare disc axial mechanics and glycosaminoglycan and water composition of experimental animal models to the human lumbar disc, to aid in both selection and interpretation of experimental disc research.

The effect of relative needle diameter in puncture and sham injection animal models of degeneration

STUDY DESIGN

Biomechanical study and literature review.

OBJECTIVES

To quantify the acute effect of needle diameter on the in vitro mechanical properties of cadaver lumbar discs in the rat and sheep. To review published in vivo animal studies and evaluate disc changes with respect to the relative needle size.

SUMMARY OF BACKGROUND DATA

There are many cases where a disc needle puncture or injection is applied to animal models: puncture injuries to induce degeneration, chemonucleolysis to induce degeneration, and delivery of disc therapies. It is not clear what role the size of the needle may have in the outcome.

METHODS

Mechanics were measured after sham phosphate buffered saline injection with a 27 G or 33 G needle in the rat and with a 27 G needle in the sheep. A literature review was performed to evaluate studies in which animal discs were treated with a needle puncture or a sham injection. For each study, the ratio of the needle diameter to disc height (needle:height) was calculated.

RESULTS

When the rat was injected with a 27 G needle (52% of disc height), the compression, tension, and neutral zone stiffnesses were 20% to 60% below preinjected values and the neutral zone length was 130% higher; when injected with a 33 G needle (26% of disc height), the only affected property was the neutral zone length, which was only 20% greater. When the sheep was injected with a 27 G needle (10% of disc height), none of the axial properties were different from intact, the torsion stiffness was not different, and the torque range was 15% smaller. Twenty-three in vivo studies in the rat, rabbit, dog, or sheep were reviewed. The disc changes depended on the ratio of needle diameter to disc height as follows: significant changes were not observed for needle:height less than 40%, although between 25% and 40% results were variable and some minor nonsignificant effects were observed, disc changes were universal for needle:height over 40%.

CONCLUSION

A needle puncture may directly alter mechanical properties via nucleus pulposus depressurization and/or anulus fibrosus damage, depending on the relative needle size. As more basic science research is aimed at treating disc degeneration via injection of therapeutic factors, these findings provide guidance in design of animal studies. Such studies should consider the relative needle size and include sham control groups to account for the potential effects of the needle injection.

An in vivo model of reduced nucleus pulposus glycosaminoglycan content in the rat lumbar intervertebral disc

STUDY DESIGN

An in vivo model resembling early stage disc degeneration in the rat lumbar spine.

OBJECTIVE

Simulate the reduced glycosaminoglycan content and altered mechanics observed in intervertebral disc degeneration using a controlled injection of chondroitinase ABC (ChABC).

SUMMARY OF BACKGROUND DATA

Nucleus glycosaminoglycan reduction occurs early during disc degeneration; however, mechanisms through which degeneration progresses from this state are unknown. Animal models simulating this condition are essential for understanding disease progression and for development of therapies aimed at early intervention.

METHODS

ChABC was injected into the nucleus pulposus, and discs were evaluated via micro-CT, mechanical testing, biochemical assays, and histology 4 and 12 weeks after injection.

RESULTS

At 4 weeks, reductions in nucleus glycosaminoglycan level by 43%, average height by 12%, neutral zone modulus by 40%, and increases in range of motion by 40%, and creep strain by 25% were found. Neutral zone modulus and range of motion were correlated with nucleus glycosaminoglycan. At 12 weeks, recovery of some mechanical function was detected as range of motion and creep returned to control levels; however, this was not attributed to glycosaminoglycan restoration, because mechanics were no longer correlated with glycosaminoglycan.

CONCLUSION

An in vivo model simulating physiologic levels of glycosaminoglycan loss was created to aid in understanding the relationships between altered biochemistry, altered mechanics, and altered cellular function in degeneration.