1
|
Jiao X, Peng X, Jin X, Liu N, Yu Y, Liu R, Li Z. Nano-composite system of traditional Chinese medicine for ocular applications: molecular docking and three-dimensional modeling insight for intelligent drug evaluation. Drug Deliv Transl Res 2023; 13:3132-3144. [PMID: 37355484 DOI: 10.1007/s13346-023-01376-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/30/2023] [Indexed: 06/26/2023]
Abstract
The absorption of drugs was impeded in the posterior part of the eye due to the special structure. In addition, it was crucial to comprehend transport laws of molecules in ocular drug delivery for designing effective strategies. However, the current quality evaluation methods of the eye were backward and lack of dynamic monitoring of drug processes in vivo. Herein, nano-drug delivery system and three-dimensional (3D) model were combined to overcome the problems of low bioavailability and diffusion law. The model drugs were screened by molecular docking. The flexible nano-liposome (FNL) and temperature-sensitive gel (TSG) composite formulation was characterized through comprehensive evaluation. COMSOL software was utilized to build 3D eyeball to predict the bioavailability of drugs. The size of the preparation was about 98.34 nm which is relatively optimal for the enhanced permeability of the eyes. The formulation showed a stronger safety and non-irritant. The pharmacokinetics results of aqueous humor showed that the AUC of two drugs in this system increased by 3.79 and 3.94 times, respectively. The results of 3D calculation model proved that the concentrations of drugs reaching the retina were 1.90×10-5 mol/m3 and 6.37×10-6 mol/m3. In conclusion, the FNL-TSG markedly improved the bioavailability of multiple components in the eye. More importantly, a simplified 3D model was developed to preliminarily forecast the bioavailability of the retina after drug infusion, providing technical support for the accurate evaluation of ocular drug delivery. It provided new pattern for the development of intelligent versatile ophthalmic preparations.
Collapse
Affiliation(s)
- Xinyi Jiao
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Xingru Peng
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Xin Jin
- Military Medicine Section, Dongli District, Logistics University of People's Armed Police Force, 1 Huizhihuan Road, Tianjin, 300309, China
| | - Ning Liu
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Yang Yu
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Rui Liu
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China.
| | - Zheng Li
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| |
Collapse
|
2
|
Pérez-Cano FD, Jiménez-Pérez JR, Molina-Viedma AJ, López-Alba E, Luque-Luque A, Delgado-Martínez A, Díaz-Garrido FA, Jiménez-Delgado JJ. Human femur fracture by mechanical compression: Towards the repeatability of bone fracture acquisition. Comput Biol Med 2023; 164:107249. [PMID: 37473562 DOI: 10.1016/j.compbiomed.2023.107249] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Revised: 07/01/2023] [Accepted: 07/07/2023] [Indexed: 07/22/2023]
Abstract
The increase in life expectancy combined with greater bone fragility over the years is causing a rise in the bone fracture cases. Femur fractures are the most important due to their high mortality rate. This multidisciplinary work is carried out in this context and focuses on the experimental reproduction of human femur fractures by compression. We describe a sequence of steps supervised by orthopaedic surgeons for the correct arrangement of specimens on the system set up to perform the experiment. The device applies force by compression until the human bone is fractured. All tests performed have been monitored and evaluated from different knowledge perspectives. The results obtained have demonstrated the repeatability of the fracture type in a controlled environment as well as identifying the main features involved in this process. In addition, the fractured bones have been digitized to analyze the fracture zone to recreate and evaluate future simulations.
Collapse
Affiliation(s)
- F D Pérez-Cano
- Graphics and Geomatics Group of Jaén, University of Jaén, Jaén, Spain.
| | - J R Jiménez-Pérez
- Graphics and Geomatics Group of Jaén, University of Jaén, Jaén, Spain.
| | - A J Molina-Viedma
- Department of Mechanical and Mining Engineering, University of Jaén, Jaén, Spain.
| | - E López-Alba
- Department of Mechanical and Mining Engineering, University of Jaén, Jaén, Spain.
| | - A Luque-Luque
- Graphics and Geomatics Group of Jaén, University of Jaén, Jaén, Spain.
| | - A Delgado-Martínez
- Department of Orthopedic Surgery, Complejo Hospitalario de Jaén, Jaén, Spain; Department of Health Sciences, University of Jaén, Jaén, Spain.
| | - F A Díaz-Garrido
- Department of Mechanical and Mining Engineering, University of Jaén, Jaén, Spain.
| | | |
Collapse
|
3
|
Demirtas A, Taylor EA, Gludovatz B, Ritchie RO, Donnelly E, Ural A. An integrated experimental-computational framework to assess the influence of microstructure and material properties on fracture toughness in clinical specimens of human femoral cortical bone. J Mech Behav Biomed Mater 2023; 145:106034. [PMID: 37494816 DOI: 10.1016/j.jmbbm.2023.106034] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 06/08/2023] [Accepted: 07/16/2023] [Indexed: 07/28/2023]
Abstract
Microstructural and compositional changes that occur due to aging, pathological conditions, or pharmacological treatments alter cortical bone fracture resistance. However, the relative importance of these changes to the fracture resistance of cortical bone has not been quantified in detail. In this technical note, we developed an integrated experimental-computational framework utilizing human femoral cortical bone biopsies to advance the understanding of how fracture resistance of cortical bone is modulated due to modifications in its microstructure and material properties. Four human biopsy samples from individuals with varying fragility fracture history and osteoporosis treatment status were converted to finite element models incorporating specimen-specific material properties and were analyzed using fracture mechanics-based modeling. The results showed that cement line density and osteonal volume had a significant effect on crack volume. The removal of cement lines substantially increased the crack volume in the osteons and interstitial bone, representing straight crack growth, compared to models with cement lines due to the lack of crack deflection in the models without cement lines. Crack volume in the osteons and interstitial bone increased when mean elastic modulus and ultimate strength increased and mean fracture toughness decreased. Crack volume in the osteons and interstitial bone was reduced when material property heterogeneity was incorporated in the models. Although both the microstructure and the heterogeneity of the material properties of the cortical bone independently increased the fracture toughness, the relative contribution of the microstructure was more significant. The integrated experimental-computational framework developed here can identify the most critical microscale features of cortical bone modulated by pathological processes or pharmacological treatments that drive changes in fracture resistance and improve our understanding of the relative influence of microstructure and material properties on fracture resistance of cortical bone.
Collapse
Affiliation(s)
- Ahmet Demirtas
- Department of Mechanical Engineering, Villanova University, Villanova, PA, USA
| | - Erik A Taylor
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY, USA
| | - Bernd Gludovatz
- School of Mechanical and Manufacturing Engineering, University of New South Wales (UNSW Sydney), Sydney, NSW, 2052, Australia
| | - Robert O Ritchie
- Department of Materials Science and Engineering, University of California, Berkeley, CA, 94720, USA
| | - Eve Donnelly
- Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA; Musculoskeletal Integrity Program, Weill Cornell Medicine, Research Institute, Hospital for Special Surgery, New York City, NY, USA
| | - Ani Ural
- Department of Mechanical Engineering, Villanova University, Villanova, PA, USA.
| |
Collapse
|
4
|
A review on prediction of bone fracture using LEFM. FORCES IN MECHANICS 2022. [DOI: 10.1016/j.finmec.2022.100158] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
5
|
Kumar A, Ghosh R. A review on experimental and numerical investigations of cortical bone fracture. Proc Inst Mech Eng H 2022; 236:297-319. [DOI: 10.1177/09544119211070347] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This paper comprehensively reviews the various experimental and numerical techniques, which were considered to determine the fracture characteristics of the cortical bone. This study also provides some recommendations along with the critical review, which would be beneficial for future research of fracture analysis of cortical bone. Cortical bone fractures due to sports activities, climbing, running, and engagement in transport or industrial accidents. Individuals having different diseases are also at high risk of cortical bone fracture. It has been observed that osteon orientation influences cortical bone fracture toughness and fracture mechanisms. Apart from this, recent studies indicate that fracture parameters of cortical bone also depend on many factors such as age, sex, temperature, osteoporosis, orientation, location, loading condition, strain rate, and storage facility, etc. The cortical bone regains its fracture toughness due to various toughening mechanisms. Owing to these factors, several experimental, clinical, and numerical investigations have been carried out to determine the fracture parameters of the cortical bone. Cortical bone is the dense outer surface of the bone and contributes to 80%–82% of the skeleton mass. Cortical bone experiences load far exceeding body weight due to muscle contraction and the dynamics of motion. It is very important to know the fracture pattern, direction of fracture, location of the fracture, and toughening mechanism of cortical bone. A basic understanding of the different factors that affect the fracture parameters and fracture mechanisms of the cortical bone is necessary to prevent the failure and fracture of cortical bone. This review has summarized the advancement considered in the various experimental techniques and numerical methods to get complete information about the fracture mechanisms of cortical bone.
Collapse
Affiliation(s)
- Ajay Kumar
- School of Engineering, Indian Institute of Technology Mandi (IIT Mandi), Kamand, Mandi 175005, Himachal Pradesh, India
| | - Rajesh Ghosh
- School of Engineering, Indian Institute of Technology Mandi (IIT Mandi), Kamand, Mandi 175005, Himachal Pradesh, India
| |
Collapse
|
6
|
Ural A. Biomechanical mechanisms of atypical femoral fracture. J Mech Behav Biomed Mater 2021; 124:104803. [PMID: 34479108 DOI: 10.1016/j.jmbbm.2021.104803] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/12/2021] [Revised: 08/12/2021] [Accepted: 08/26/2021] [Indexed: 11/26/2022]
Abstract
Antiresorptives such as bisphosphonates (BP) and denosumab are commonly used osteoporosis treatments that are effective in preventing osteoporotic fractures by suppressing bone turnover. Although these treatments reduce fracture risk, their long-term use has been associated with atypical femoral fracture (AFF), a rare potential side effect. Despite its rare occurrence, AFF has had a disproportionately significant adverse impact on society due to its severe outcomes such as loss of function and delayed healing. These severe outcomes have led to the decrease in the use and prescription of osteoporosis treatment drugs due to patient anxiety and clinician reluctance. This creates the risk for increasing osteoporotic fracture rates in the population. The existing information on the pathogenesis of AFF primarily relies on retrospective observational studies. However, these studies do not explain the underlying mechanisms that contribute to AFF, and therefore the mechanistic origins of AFF are still poorly understood. The purpose of this review is to outline the current state of knowledge of the mechanical mechanisms of AFF. The review focuses on three major potential mechanical mechanisms of AFF based on the current literature which are (1) macroscale femoral geometry which influences the stress/strain distribution in the femur under loading; (2) bone matrix composition, potentially altered by long-term remodeling suppression by BPs, which directly influences the material properties of bone and its mechanical behavior; and (3) microstructure, potentially altered by long-term remodeling suppression by BPs, which impacts fracture resistance through interaction with crack propagation. In addition, this review presents the critical knowledge gaps in understanding AFF and also discusses approaches to closing the knowledge gap in understanding the underlying mechanisms of AFF.
Collapse
Affiliation(s)
- Ani Ural
- Department of Mechanical Engineering, Villanova University, 800 Lancaster Avenue, Villanova, PA, 19085, USA.
| |
Collapse
|
7
|
Buccino F, Colombo C, Vergani LM. A Review on Multiscale Bone Damage: From the Clinical to the Research Perspective. MATERIALS (BASEL, SWITZERLAND) 2021; 14:1240. [PMID: 33807961 PMCID: PMC7962058 DOI: 10.3390/ma14051240] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/22/2020] [Revised: 02/10/2021] [Accepted: 03/01/2021] [Indexed: 02/06/2023]
Abstract
The investigation of bone damage processes is a crucial point to understand the mechanisms of age-related bone fractures. In order to reduce their impact, early diagnosis is key. The intricate architecture of bone and the complexity of multiscale damage processes make fracture prediction an ambitious goal. This review, supported by a detailed analysis of bone damage physical principles, aims at presenting a critical overview of how multiscale imaging techniques could be used to implement reliable and validated numerical tools for the study and prediction of bone fractures. While macro- and meso-scale imaging find applications in clinical practice, micro- and nano-scale imaging are commonly used only for research purposes, with the objective to extract fragility indexes. Those images are used as a source for multiscale computational damage models. As an example, micro-computed tomography (micro-CT) images in combination with micro-finite element models could shed some light on the comprehension of the interaction between micro-cracks and micro-scale bone features. As future insights, the actual state of technology suggests that these models could be a potential substitute for invasive clinical practice for the prediction of age-related bone fractures. However, the translation to clinical practice requires experimental validation, which is still in progress.
Collapse
Affiliation(s)
| | | | - Laura Maria Vergani
- Department of Mechanical Engineering (DMEC), Politecnico di Milano, Via La Masa 1, 20154 Milano, Italy; (F.B.); (C.C.)
| |
Collapse
|
8
|
Hu Y, Fan Z, Zhang H, Zhang C, Fu W. Surface quality and pullout strength of ultrasonically-assisted drilling cortical bone. Proc Inst Mech Eng H 2020; 235:378-388. [PMID: 33356906 DOI: 10.1177/0954411920983662] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Bone surgery is a complex process involving sustainable and healthy human recuperation, but poor surface quality and loose implant fixtures can affect the recovery time of orthopedic patients. However, it has been demonstrated that the application of ultrasonic vibration during drilling procedures can improve the success of bone remediation procedures. The focus of the present paper was on the investigation of surface quality and pullout strength of drilled holes. After analyzing the special kinematic characteristics of the ultrasonically-assisted drilling (UAD), UAD testing using fresh cortical bone was carried out and compared with the results obtained after conventional drilling (CD) procedures. Surface roughness measurements and microscope examination were used to evaluate surface quality, and an electro-mechanical tensile machine was used to measure pullout resistance. The test findings indicated that surface roughness was reduced by 17-68.7% when using UAD; the axial pullout strength of screws inserted into UAD holes was significantly increased by 4.28-30.1% compared to that of CD. It was found also that low spindle speeds and high feed rates reduced surface quality and the stability of the inserted cortical screws. The findings demonstrated that UAD produced better surface quality and higher pullout strengths, which could provide greater stability for implants and improved post-operative recovery.
Collapse
Affiliation(s)
- Yahui Hu
- Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering, National Demonstration Center for Experimental Mechanical and Electrical Engineering Education, Tianjin University of Technology, Tianjin, China
| | - Zhenhao Fan
- Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering, National Demonstration Center for Experimental Mechanical and Electrical Engineering Education, Tianjin University of Technology, Tianjin, China
| | - Huaiyu Zhang
- Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering, National Demonstration Center for Experimental Mechanical and Electrical Engineering Education, Tianjin University of Technology, Tianjin, China
| | - Chunqiu Zhang
- Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering, National Demonstration Center for Experimental Mechanical and Electrical Engineering Education, Tianjin University of Technology, Tianjin, China
| | - Weihua Fu
- Department of General Surgery, Tianjin Medical University General Hospital, Tianjin, China
| |
Collapse
|
9
|
Pérez-Cano FD, Luque-Luque A, Jiménez-Delgado JJ. Towards a 2D cortical osseous tissue representation and generation at micro scale. A computational model for bone simulations. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE 2020; 197:105774. [PMID: 33032076 DOI: 10.1016/j.cmpb.2020.105774] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/22/2020] [Accepted: 09/22/2020] [Indexed: 06/11/2023]
Abstract
BACKGROUND AND OBJECTIVE the acquisition of microscopic images of human bones is a complex and expensive process. Moreover, the objective of obtaining a large data bank with microscopic images in order to carry out massive studies or to train automatic generation algorithms is not an option. Consequently, most of the current work focuses on the analysis of small regions captured by a microscope. The aim is the development of a tool to represent bone tissue at microscopic levels which is suitable for performing physical simulations, as well as for the diagnosis of various diseases. This work includes the whole process from the digitization of a human bone to the generation of bone tissue in a determined area of the bone selected through a cutting plane. METHODS based on the anatomy of the bone structure, the parameters that allow the representation of the bone tissue at mesoscale level have been analyzed. Although the models are randomly generated, they are based on statistical parameters. The model generator is based on the analysis of images of bone tissue and its parameters, performing a representation of each of its relevant structures in a way that fulfils these parameters. RESULTS the tool is useful for the virtual generation of bone tissue that satisfies the main characteristics of the cortical bone. The models obtained have been favorably evaluated in two stages. In the first stage, a scientific group has examined a set of images, in which images of the models generated were mixed with images obtained through traditional methods. Then, the physical characteristics of the generated tissue have been compared with the morphology of the bone tissue. CONCLUSIONS the model generator allows us to perform precise simulations in order to obtain realistic images with physical characteristics in accordance with reality. It is necessary to emphasize that even though the most relevant structures are included, the proposed model generator can be expanded to include new parameters or elements, so that it can be adapted to new needs. It could even break down randomness and parameterize it completely in order to allow the recreation of the tissue conditions of other studies.
Collapse
Affiliation(s)
| | - Adrián Luque-Luque
- Computer Graphics and Geomatics Group, Campus Las Lagunillas S/N, Jaén 23071, Spain.
| | | |
Collapse
|
10
|
Abstract
PURPOSE OF REVIEW The goal of this review is to summarize recent advances in modeling of bone fracture using fracture mechanics-based approaches at multiple length scales spanning nano- to macroscale. RECENT FINDINGS Despite the additional information that fracture mechanics-based models provide over strength-based ones, the application of this approach to assessing bone fracture is still somewhat limited. Macroscale fracture models of bone have demonstrated the potential of this approach in uncovering the contributions of geometry, material property variation, as well as loading mode and rate on whole bone fracture response. Cortical and cancellous microscale models of bone have advanced the understanding of individual contributions of microstructure, microarchitecture, local material properties, and material distribution on microscale fracture resistance of bone. Nano/submicroscale models have provided additional insight into the effect of specific changes in mineral, collagen, and non-collagenous proteins as well as their interaction on energy dissipation and fracture resistance at small length scales. Advanced modeling approaches based on fracture mechanics provide unique information about the underlying multiscale fracture mechanisms in bone and how these mechanisms are influenced by the structural and material constituents of bone at different length scales. Fracture mechanics-based modeling provides a powerful approach that complements experimental evaluations and advances the understanding of critical determinants of fracture risk.
Collapse
Affiliation(s)
- Ani Ural
- Department of Mechanical Engineering, Villanova University, 800 Lancaster Avenue, Villanova, PA, 19085, USA.
| |
Collapse
|
11
|
Demirtas A, Rajapakse CS, Ural A. Assessment of the multifactorial causes of atypical femoral fractures using a novel multiscale finite element approach. Bone 2020; 135:115318. [PMID: 32173503 DOI: 10.1016/j.bone.2020.115318] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/15/2019] [Revised: 03/10/2020] [Accepted: 03/11/2020] [Indexed: 12/14/2022]
Abstract
Atypical femoral fracture (AFF), which is a low energy fracture in the subtrochanteric or diaphysis region of the femur, has multifactorial causes that span macro- to microscale mechanisms including femoral geometry, cortical bone composition and structure. However, the extent of individual and combined influence of these factors on AFF is still not well understood. As a result, the aim of this study is to develop a multiscale fracture mechanics-based finite element modeling framework that is capable of quantifying the individual and combined influence of macroscale femoral geometrical properties as well as cortical bone microscale material properties and structure on AFF. In this study, three different femoral geometries with two different cortical bone microstructures, and two different material property distributions were investigated by first determining the critical AFF locations in the femur using macroscale stress analysis and then performing coupled macro-microscale fracture simulations. The simulation results showed that femoral geometry led to substantial differences in crack growth independent of cortical microstructure and tissue level material properties. The results suggest that multiple femoral geometrical properties, including neck-shaft angle and curvature, may contribute to the fracture behavior at AFF sites rather than a single macroscale geometrical feature. Osteonal area had a significant effect on microcrack propagation at AFF sites independent of microscale material property distribution and femoral geometry. In addition, cortical bone tissue level material heterogeneity improved the fracture resistance independent of femoral geometry and cortical microstructure. In summary, the computational approach developed in this study identified the individual, combined, and relative influence of multiscale factors on AFF risk. The new framework developed in this study could help identify the governing multiscale mechanisms of AFF and bring additional insight into the possible association of long-term bisphosphate treatment with AFF.
Collapse
Affiliation(s)
- Ahmet Demirtas
- Department of Mechanical Engineering, Villanova University, Villanova, PA, USA
| | - Chamith S Rajapakse
- Departments of Radiology and Orthopaedic Surgery, University of Pennsylvania, Philadelphia, PA, USA
| | - Ani Ural
- Department of Mechanical Engineering, Villanova University, Villanova, PA, USA.
| |
Collapse
|