Structure-property relationships of velar bone tissue from the energy absorbing horncore of bighorn sheep rams

Velar bone is the material that fills the horncore of bighorn sheep rams. The architectural dimensions of velar bone are orders of magnitude larger than trabecular bone, and velae are more sail-like compared to strut-like trabeculae. Velar bone is important for energy absorption and reduction of brain cavity accelerations during high energy head impacts, but velar bone material properties were previously unknown. It was hypothesized that velar bone tissue would have properties that are beneficial for increased energy absorption at the material level. Solid velar bone beams were tested using dynamic mechanical analysis and three-point bending to quantify mechanical properties. Additionally, the porosity, osteon population density, and mineral content of the solid velar sails were quantified. The velar bone damping factor (∼0.03 - 0.06) and modulus of toughness (3.9 ± 0.4 MJ/m3) were lower than other mammalian cortical bone tissues. The solid bony sails have a bending modulus (8.6 ± 0.5 GPa) that lies within the range of bending moduli values previously reported for individual trabecular struts and cortical bone tissue. The solid velar bone sails had porosity (6.7 ± 0.9 %) and bone mineral content (66 ± 1 %) in the range of cortical bone values. Interestingly, velar sails contained osteons, which are rarely found in trabecular struts. The velar bone osteon population density (5.8 ± 0.9 osteons/mm2) is in the low end of the range of values reported for cortical bone in other mammals. STATEMENT OF SIGNIFICANCE: Bighorn sheep rams sustain high energy head impacts during intraspecific combat without overt signs of brain injury. Previous studies have shown that the bony horncore plays a critical role in energy absorption and reduction of brain cavity accelerations post impact, which has implications for concussion prevention in humans. However, the material properties of the horncore velar bone were previously unknown. This study quantified the material properties and structure-property relationships of the horncore velar bone at the tissue level. Results from this study will improve our understanding of how bighorn sheep mitigate brain injury during head-to-head impacts and may inspire the design of novel materials for energy absorption applications (i.e., helmets materials that reduce concussion occurrence in humans).

Towards a 2D cortical osseous tissue representation and generation at micro scale. A computational model for bone simulations

BACKGROUND AND OBJECTIVE

the acquisition of microscopic images of human bones is a complex and expensive process. Moreover, the objective of obtaining a large data bank with microscopic images in order to carry out massive studies or to train automatic generation algorithms is not an option. Consequently, most of the current work focuses on the analysis of small regions captured by a microscope. The aim is the development of a tool to represent bone tissue at microscopic levels which is suitable for performing physical simulations, as well as for the diagnosis of various diseases. This work includes the whole process from the digitization of a human bone to the generation of bone tissue in a determined area of the bone selected through a cutting plane.

METHODS

based on the anatomy of the bone structure, the parameters that allow the representation of the bone tissue at mesoscale level have been analyzed. Although the models are randomly generated, they are based on statistical parameters. The model generator is based on the analysis of images of bone tissue and its parameters, performing a representation of each of its relevant structures in a way that fulfils these parameters.

RESULTS

the tool is useful for the virtual generation of bone tissue that satisfies the main characteristics of the cortical bone. The models obtained have been favorably evaluated in two stages. In the first stage, a scientific group has examined a set of images, in which images of the models generated were mixed with images obtained through traditional methods. Then, the physical characteristics of the generated tissue have been compared with the morphology of the bone tissue.

CONCLUSIONS

the model generator allows us to perform precise simulations in order to obtain realistic images with physical characteristics in accordance with reality. It is necessary to emphasize that even though the most relevant structures are included, the proposed model generator can be expanded to include new parameters or elements, so that it can be adapted to new needs. It could even break down randomness and parameterize it completely in order to allow the recreation of the tissue conditions of other studies.

Bone histomorphometry of the clavicle in a forensic sample from Albania

Forensic assessment of skeletal material includes age estimation of unknown individuals. When dealing with extremely fragmented human remains that lack macro-features used in age estimation, histological assessment of the skeletal elements can be employed. Historically, microscopic methods for age assessment used by forensic anthropologists have been available since 1965. Several skeletal elements have been used for this purpose. Among them, the clavicle has garnered very little attention. The purpose of this study is to explore the validity of clavicular histomorphometry as an age marker in a modern Balkan sample. This study examined a modern clavicular autopsy sample from Albania. The sample consisted of 33 individuals of known age and cause of death. Data were collected for micro-anatomical features including osteon population density (OPD) and cortical area. Intra- and inter-observer errors were assessed through technical error of measurement (TEM) and R coefficient. A validation study was performed in order to test the accuracy of existing histological formulae. Regression analysis was run to developed age prediction models with the best models tested through cross-validation and the comparison between OPD for the Albanian sample and a European-American sample examined. Intra- and inter-observer error TEM results demonstrated values falling within the limits of acceptance. The existing histological methods did not perform accurately on the sample under study. Regression equations for Albanians produced age estimations deviating 8 and 11 years from known age. Cross-validation on the most accurate regression formula which includes OPD as a single variable demonstrated similar mean errors. Statistically significant differences were observed between the Albanian and the European-American population when the two samples were compared. The research presented is the fifth article published and the fifth population explored on clavicular microstructure. The potential of histology to estimate age on the Albanian population is shown here; however, population effect, diet and health status might be considered. Further inclusion of individuals will corroborate our preliminary findings.

3D analysis of the osteonal and interstitial tissue in human radii cortical bone

Human cortical bone has a complex hierarchical structure that is periodically remodelled throughout a lifetime. This microstructure dictates the mechanical response of the tissue under a critical load. If only some structural features, such as the different porosities observed in bone, are primarily studied, then investigations may not fully consider the osteonal systems in three-dimensions (3D). Currently, it is difficult to differentiate osteons from interstitial tissue using standard 3D characterization methods. Synchrotron radiation micro-computed tomography (SR-μCT) in the phase contrast mode is a promising method for the investigation of osteons. In the current study, SR-μCT imaging was performed on cortical bone samples harvested from eight human radii (female, 50-91 y.o.). The images were segmented to identify Haversian canals, osteocyte lacunae, micro-cracks, as well as osteons. The significant correlation between osteonal and Haversian canal volume fraction highlights the role of the canals as sites where bone remodelling is initiated. The results showed that osteocyte lacunae morphometric parameters depend on their distance to cement lines, strongly suggesting the evolution of biological activity from the beginning to the end of the remodelling process. Thus, the current study provides new data on 3D osteonal morphometric parameters and their relationships with other structural features in humans.

Crack propagation in cortical bone is affected by the characteristics of the cement line: a parameter study using an XFEM interface damage model

Bulk properties of cortical bone have been well characterized experimentally, and potent toughening mechanisms, e.g., crack deflections, have been identified at the microscale. However, it is currently difficult to experimentally measure local damage properties and isolate their effect on the tissue fracture resistance. Instead, computer models can be used to analyze the impact of local characteristics and structures, but material parameters required in computer models are not well established. The aim of this study was therefore to identify the material parameters that are important for crack propagation in cortical bone and to elucidate what parameters need to be better defined experimentally. A comprehensive material parameter study was performed using an XFEM interface damage model in 2D to simulate crack propagation around an osteon at the microscale. The importance of 14 factors (material parameters) on four different outcome criteria (maximum force, fracture energy, crack length and crack trajectory) was evaluated using ANOVA for three different osteon orientations. The results identified factors related to the cement line to influence the crack propagation, where the interface strength was important for the ability to deflect cracks. Crack deflection was also favored by low interface stiffness. However, the cement line properties are not well determined experimentally and need to be better characterized. The matrix and osteon stiffness had no or low impact on the crack pattern. Furthermore, the results illustrated how reduced matrix toughness promoted crack penetration of the cement line. This effect is highly relevant for the understanding of the influence of aging on crack propagation and fracture resistance in cortical bone.

The contribution of the pericanalicular matrix to mineral content in human osteonal bone

The osteocyte lacunar-canalicular network (LCN) penetrates bone and houses the osteocytes and their processes. Despite its rather low volume fraction, the LCN represents an outstanding large surface that is possibly used by the osteocytes to interact with the surrounding mineralized bone matrix thereby contributing to mineral homeostasis. The aim of this study was to quantitatively describe such contributions by spatially correlating the local density of the LCN with the mineral content at the same location in micrometer-sized volume elements in human osteons. For this purpose, 65 osteons from the femur midshaft from healthy adults (n = 4) and children (n = 2) were structurally characterized with two different techniques. The 3D structure of the LCN in the osteons was imaged with confocal laser scanning microscopy after staining the bone samples with rhodamine. Subsequent image analysis provided the canalicular length density, i.e. the total length of the canaliculi per unit volume (μm/μm³). Quantitative information on the mineral content (wt%Ca) from the identical regions was obtained using quantitative backscattered electron imaging. As the LCN-porosity lowers the mineral content, a negative correlation between Ca content and network density was expected. Calculations predict a reduction of around -0.97 fmol Ca per μm of network. However, the experiment revealed for 62 out of 65 osteons a positive correlation resulting in an average additional Ca loading of +1.15 fmol per μm of canalicular network, i.e. an accumulation of mineral has occurred at dense network regions. We hypothesize that this accumulation happens in the close vicinity of canaliculi forming mineral reservoirs that can be utilized by osteocytes. Significant differences found between individuals indicate that the extent of mineral loading of the reservoir zone reflects an important parameter for mineral homeostasis.

Histomorphometry and cortical robusticity of the adult human femur

Recent quantitative analyses of human bone microanatomy, as well as theoretical models that propose bone microstructure and gross anatomical associations, have started to reveal insights into biological links that may facilitate remodeling processes. However, relationships between bone size and the underlying cortical bone histology remain largely unexplored. The goal of this study is to determine the extent to which static indicators of bone remodeling and vascularity, measured using histomorphometric techniques, relate to femoral midshaft cortical width and robusticity. Using previously published and new quantitative data from 450 adult human male (n = 233) and female (n = 217) femora, we determine if these aspects of femoral size relate to bone microanatomy. Scaling relationships are explored and interpreted within the context of tissue form and function. Analyses revealed that the area and diameter of Haversian canals and secondary osteons, and densities of secondary osteons and osteocyte lacunae from the sub-periosteal region of the posterior midshaft femur cortex were significantly, but not consistently, associated with femoral size. Cortical width and bone robusticity were correlated with osteocyte lacunae density and scaled with positive allometry. Diameter and area of osteons and Haversian canals decreased as the width of cortex and bone robusticity increased, revealing a negative allometric relationship. These results indicate that microscopic products of cortical bone remodeling and vascularity are linked to femur size. Allometric relationships between more robust human femora with thicker cortical bone and histological products of bone remodeling correspond with principles of bone functional adaptation. Future studies may benefit from exploring scaling relationships between bone histomorphometric data and measurements of bone macrostructure.