Microbial processes in the Athabasca Oil Sands and their potential applications in microbial enhanced oil recovery

Biodegradation capabilities of filamentous fungi in high-concentration heavy crude oil environments

In this comprehensive study, we delved into the capabilities of five fungal strains: Aspergillus flavus, Aspergillus niger, Penicillium chrysogenum, Penicillium glabrum, and Penicillium rubens (the latter isolated from heavy crude oil [HCO]) in metabolizing HCO as a carbon source. Employing a meticulously designed experimental approach, conducted at room temperature (25 °C), we systematically explored various culture media and incubation periods. The results unveiled the exceptional resilience of all these fungi to HCO, with A. flavus standing out as the top performer. Notably, A. flavus exhibited robust growth, achieving a remarkable 59.1% expansion across the medium's surface, accompanied by distinctive macroscopic traits, including a cottony appearance and vibrant coloration. In an effort to further scrutinize its biotransformation prowess, we conducted experiments in a liquid medium, quantifying CO2 production through gas chromatography, which reached its zenith at day 30, signifying substantial bioconversion with a 38% increase in CO2 production. Additionally, we monitored changes in surface tension using the Du Noüy ring method, revealing a reduction in aqueous phase tension from 72.3 to 47 mN/m. This compelling evidence confirms that A. flavus adeptly metabolizes HCO to fuel its growth, while concurrently generating valuable biosurfactants. These findings underscore the immense biotechnological potential of A. flavus in addressing challenges related to HCO, thereby offering promising prospects for bioremediation and crude oil bioupgrading endeavors.

Abiotic and biotic constituents of oil sands process-affected waters

The oil sands in Northern Alberta are the largest oil sands in the world, providing an important economic resource for the Canadian energy industry. The extraction of petroleum in the oil sands begins with the addition of hot water to the bituminous sediment, generating oil sands process-affected water (OSPW), which is acutely toxic to organisms. Trillions of litres of OSPW are stored on oil sands mining leased sites in man-made reservoirs called tailings ponds. As the volume of OSPW increases, concerns arise regarding the reclamation and eventual release of this water back into the environment. OSPW is composed of a complex and heterogeneous mix of components that vary based on factors such as company extraction techniques, age of the water, location, and bitumen ore quality. Therefore, the effective remediation of OSPW requires the consideration of abiotic and biotic constituents within it to understand short and long term effects of treatments used. This review summarizes selected chemicals and organisms in these waters and their interactions to provide a holistic perspective on the physiochemical and microbial dynamics underpinning OSPW .

Methylotrophs and Hydrocarbon-Degrading Bacteria Are Key Players in the Microbial Community of an Abandoned Century-Old Oil Exploration Well

In this work, we studied the microbial community and the physicochemical conditions prevailing in an exploratory oil well, abandoned a century ago, located in the Cahuita National Park (Costa Rica). According to our analysis, Cahuita well is characterized by a continuous efflux of methane and the presence of a mixture of hydrocarbons including phenanthrene/anthracene, fluoranthene, pyrene, dibenzothiophene, tricyclic terpanes, pyrene, sesquiterpenes, sterane, and n-alkanes. Based on the analysis of 16S rRNA gene amplicons, we detected a significant abundance of methylotrophic bacteria such as Methylobacillus (6.3-26.0% of total reads) and Methylococcus (4.1-30.6%) and the presence of common genera associated with hydrocarbon degradation, such as Comamonas (0.8-4.6%), Hydrogenophaga (1.5-3.3%) Rhodobacter (1.0-4.9%), and Flavobacterium (1.1-6.5%). The importance of C1 metabolism in this niche was confirmed by amplifying the methane monooxygenase (MMO)-encoding gene (pmo) from environmental DNA and the isolation of two strains closely related to Methylorubrum rhodesianum and Paracoccus communis with the ability to growth using methanol and formate as sole carbon source respectively. In addition, we were able to isolated 20 bacterial strains from the genera Pseudomonas, Acinetobacter, and Microbacterium which showed the capability to grow using the hydrocarbons detected in the oil well as sole carbon source. This work describes the physicochemical properties and microbiota of an environment exposed to hydrocarbons for 100 years, and it not only represents a contribution to the understanding of microbial communities in environments with permanently high concentrations of these compounds but also has biotechnological implications for bioremediation of petroleum-polluted sites.

Perylene pigment wastewater treatment by fenton-enhanced biological process

Polycyclic aromatic hydrocarbons (PAHs) are regarded as priority pollutants owing to their toxic, mutagenic and carcinogenic characteristics. Perylene is a kind of 5-ring PAH with biological toxicity, and classified as a class III carcinogen by the World Health Organization (WHO). Nowadays, some of its derivatives are often used as industrial pigments. Hence, urgent attention is highly needed to develop new and improved techniques for PAHs and their derivatives removal from the environment. In this study, Fenton oxidation process was hybridized with the biological (anaerobic and aerobic) treatments for the removal of perylene pigment from wastewater. The experiments were carried out by setting Fenton treatment system before and between the biological treatments. The biological results showed that COD removal efficiency reached 60% during 24 h HRT with an effluent COD concentration of 1567.78 mg/L. After the HRT increased to 48 h, the COD removal efficiency was slightly increased (67.9%). However, after combining Fenton treatment with biological treatment (Anaerobic-Fenton-Aerobic), the results revealed over 85% COD removal efficiency and the effluent concentration less than 600 mg/L which was selected as the better treatment configuration for the biological and chemical combined system. The microbial community analysis of activated sludge was carried out with high-throughput Illumina sequencing platform and results showed that Pseudomonas, Citrobacter and Methylocapsa were found to be the dominant genera detected in aerobic and anaerobic reactors. These dominant bacteria depicted that the community composition of the reactors for treating perylene pigments wastewater were similar to that of the soil contaminated by PAHs and the activated sludge from treating PAHs wastewater. Economic analysis results revealed that the reagent cost was relatively cheap, amounting to 10.64 yuan per kilogram COD. This study vividly demonstrated that combining Fenton treatment with biological treatment was efficient and cost-effective.

A novel exopolysaccharide-producing and long-chain n-alkane degrading bacterium Bacillus licheniformis strain DM-1 with potential application for in-situ enhanced oil recovery

A novel Bacillus licheniformis strain (DM-1) was isolated from a mature reservoir in Dagang oilfield of China. DM-1 showed unique properties to utilize petroleum hydrocarbons and agroindustrial by-product (molasses) for exopolysaccharide (EPS) production under oil recovery conditions. The DM-1 EPS was proven to be a proteoglycan with a molecular weight of 568 kDa. The EPS showed shear thinning properties and had high viscosities at dilute concentrations (<1%, w/v), high salinities, and elevated temperatures. Strain DM-1 could degrade long-chain n-alkanes up to C36. Viscosity reduction test have shown that the viscosity of the crude oil was reduced by 40% compared with that before DM-1 treatment. Sand pack flooding test results under simulated reservoir conditions have shown that the enhanced oil recovery efficiency was 19.2% after 7 days of in-situ bioaugmentation with B. licheniformis DM-1. The obtained results indicate that strain DM-1 is a promising candidate for in situ microbial enhanced oil recovery (MEOR).

Comparative analysis of bacterial community and functional species in oil reservoirs with different in situ temperatures

Temperature is supposed to be one of the primary drivers for the bacterial diversification as well as hydrocarbon formation process of oil reservoirs. However, the bacterial community compositions are not systematically elucidated in oil reservoirs with different temperatures. Herein, the diversity of indigenous bacteria and the functional species in the water samples from oil reservoirs with different in situ temperatures was investigated by high-throughput sequencing technology. The results showed that samples in the high (65 °C) and super high (80 °C) temperature oil reservoir had significantly high bacterial richness, even more than twice as much as moderate temperature (36 °C) ones, which showed relatively high bacterial diversity. Meanwhile, the bacterial compositions were almost similar in the high temperature oil reservoirs but there were different relative abundances of the bacterial communities. Phylogenetic analysis revealed that indigenous bacteria fell into 20 phylotypes in which Proteobacteria were the principal phylum in all of samples. At the genus level, 10 out of 22 major genera displayed statistically significant differences. Among of them, Pseudomonas was extremely dominant in all of samples, while Halomonas, Caldicoprobacter, Arcobacter, and Marinobacter tended to be enriched in the high temperature oil reservoirs. Moreover, the abundance of bacterial populations exhibited important distinction in oil reservoir such as hydrocarbon-oxidizing, fermentative, nitrate-reducing, sulfate-reducing, and methanogenic bacteria. Those bacteria were strongly correlated to in situ temperature variation.

Changes of flooding reagents' properties under simulated high temperature/pressure conditions in oil reservoirs and their impact on emulsion stability

It is of great significance to know the fate of the polymers and surfactants used for enhanced oil recovery (EOR) in oil reservoirs at a relatively high temperature/pressure. In this paper, the changes of the properties of a polymer (partially hydrolyzed polyacrylamide, HPAM) and a surfactant (petroleum sulfonate, PS) were investigated under simulated oil reservoir conditions (a temperature of 45, 60 or 75 °C and a pressure of 10, 15 or 20 MPa). The impacts of the property changes to emulsion stability were also highlighted. The results showed that the hydrolysis degree of HPAM increased from 24.3% to 28.9%, 29.7% and 35.4%, whereas the molecular weight (M_w) decreased from 7.60 × 10⁶ g mol⁻¹ to 5.43 × 10⁶ g mol⁻¹, 4.49 × 10⁶ g mol⁻¹ and 2.87 × 10⁶ g mol⁻¹ as a function of raising the temperature to 45, 60 and 75 °C with 20 MPa, respectively, for a duration of one week. However, the increased pressure showed obvious prevention effects on the degradation of HPAM M_w in the investigated pressure range of 10–20 MPa. There were no changes in the oil–water interfacial tension for PS solutions after high temperature/pressure treatment. The stabilization ability of HPAM to the emulsion decreased markedly after treatment because of the decreased viscosity attributed to the reduction of molecular weight, while that of PS did not change. It is reasonable to speculate that the influence of back produced HPAM to the stability of EOR produced water will be quite different in different oil reservoirs because of the differences in reservoir temperature, pressure and retention time, and therefore different strategies should be considered in treating the produced water from EOR.

It is of great significance to know the fate of the polymers and surfactants used for enhanced oil recovery (EOR) in oil reservoirs at a relatively high temperature/pressure.

Role of Flagella, Type IV Pili, Biosurfactants, and Extracellular Polymeric Substance Polysaccharides on the Formation of Pellicles by Pseudomonas aeruginosa

Microbial biofilms are viscoelastic materials formed by bacteria, which occur on solid surfaces, at liquid interfaces, or in free solution. Although solid surface biofilms have been widely studied, pellicles, biofilms at liquid interfaces, have had significantly less focus. In this work, interfacial shear rheology and scanning electron microscopy imaging are used to characterize how flagella, type IV pili, biosurfactants, and extracellular polymeric substance polysaccharides affect the formation of pellicles by Pseudomonas aeruginosa at an air/water interface. Pellicles still form with the loss of a single biological attachment mechanism, which is hypothesized to be due to surface tension-aided attachment. Changes in the surface structure of the pellicles are observed when changing both the function/structure of type IV pili, removing the flagella, or stopping the expression of biosurfactants. However, these changes do not appear to affect pellicle elasticity in a consistent way. Traits that affect adsorption and growth/spreading appear to affect pellicles in a manner consistent with literature results for solid surface biofilms; small differences are seen in attachment-related mechanisms, which may occur due to surface tension.

Pilot study of cold-rolling wastewater treatment using single-stage anaerobic fluidized membrane bioreactor

A pilot-scale single-stage anaerobic fluidized membrane bioreactor (AFMBR) was firstly used in this study to treat cold-rolling emulsion wastewater from steel industry. It was continuously operated for 302 days with influent COD concentration of 860-1120 mg/L. Under a hydraulic retention time of 1.5 d, the average effluent COD concentration of 72 mg/L achieved corresponding 90% of COD removal. The permeate flux was varied between 1.7 and 2.9 L/m²/h during operation which decreased with increased biomass concentration inside AFMBR. The trans-membrane pressure (TMP) was generally around 35-40 kPa, however, it increased up to 60 kPa when volatile suspended solid increased to above 2.5 g/L. Both flux and TMP data reveal the importance of biomass control for AFMBR operation. Results from terminal restriction fragment length polymorphism (T-RFLP) show the genus Methanosaeta was dominant on GAC and it shared dominance with the genera Methanomethylovorans and Methanosarcina in suspended sludge.

Investigating the Microbial Degradation Potential in Oil Sands Fluid Fine Tailings Using Gamma Irradiation: A Metagenomic Perspective

Open-pit mining of the Athabasca oil sands has generated large volumes of waste termed fluid fine tailings (FFT), stored in tailings ponds. Accumulation of toxic organic substances in the tailings ponds is one of the biggest concerns. Gamma irradiation (GI) treatment could accelerate the biodegradation of toxic organic substances. Hence, this research investigates the response of the microbial consortia in GI-treated FFT materials with an emphasis on changes in diversity and organism-related stimuli. FFT materials from aged and fresh ponds were used in the study under aerobic and anaerobic conditions. Variations in the microbial diversity in GI-treated FFT materials were monitored for 52 weeks and significant stimuli (p < 0.05) were observed. Chemoorganotrophic organisms dominated in fresh and aged ponds and showed increased relative abundance resulting from GI treatment. GI-treated anaerobic FFT_aged reported stimulus of organisms with biodegradation potential (e.g., Pseudomonas, Enterobacter) and methylotrophic capabilities (e.g., Syntrophus, Smithella). In comparison, GI-treated anaerobic FFT_fresh stimulated Desulfuromonas as the principle genus at 52 weeks. Under aerobic conditions, GI-treated FFT_aged showed stimulation of organisms capable of sulfur and iron cycling (e.g., Geobacter). However, GI-treated aerobic FFT_fresh showed no stimulus at 52 weeks. This research provides an enhanced understanding of oil sands tailings biogeochemistry and the impacts of GI treatment on microorganisms as an effect for targeting toxic organics. The outcomes of this study highlight the potential for this approach to accelerate stabilization and reclamation end points. Graphical Abstract.

Potential of wheat bran to promote indigenous microbial enhanced oil recovery

Microbial enhanced oil recovery (MEOR) is an emerging oil extraction technology that utilizes microorganisms to facilitate recovery of crude oil in depleted petroleum reservoirs. In the present study, effects of wheat bran utilization were investigated on stimulation of indigenous MEOR. Biostimulation conditions were optimized with the response surface methodology. The co-application of wheat bran with KNO₃ and NH₄H₂PO₄ significantly promoted indigenous MEOR (IMEOR) and exhibited sequential aerobic (O-), facultative (A_n-) and anaerobic (A₀-) metabolic stages. The surface tension of fermented broth decreased by approximately 35%, and the crude oil was highly emulsified. Microbial community structure varied largely among and in different IMEOR metabolic stages. Pseudomonas sp., Citrobacter sp., and uncultured Burkholderia sp. dominated the O-, A_n- and early A₀-stages. Bacillus sp., Achromobacter sp., Rhizobiales sp., Alcaligenes sp. and Clostridium sp. dominated the later A₀-stage. This study illustrated occurrences of microbial community succession driven by wheat bran stimulation and its industrial potential.

Effect of Particulate Contaminants on the Development of Biofilms at Air/Water Interfaces

The development of biofilms at air/water or oil/water interfaces has important ramifications on several applications, but it has received less attention than biofilm formation on solid surfaces. A key difference between the growth of biofilms on solid surfaces versus liquid interfaces is the range of complicated boundary conditions the liquid interface can create that may affect bacteria, as they adsorb onto and grow on the interface. This situation is exacerbated by the existence of complex interfaces in which interfacially adsorbed components can even more greatly affect interfacial boundary conditions. In this work, we present evidence as to how particle-laden interfaces impact biofilm growth at an air/water interface. We find that particles can enhance the rate of growth and final strength of biofilms at liquid interfaces by providing sites of increased adhesive strength for bacteria. The increased adhesion stems from creating localized areas of hydrophobicity that protrude in the water phase and provide sites where bacteria preferentially adhere. This mechanism is found to be primarily controlled by particle composition, with particle size providing a secondary effect. This increased adhesion through interfacial conditions creates biofilms with properties similar to those observed when adhesion is increased through biological means. Because of the generally understood ubiquity of increased bacteria attachment to hydrophobic surfaces, this result has general applicability to pellicle formation for many pellicle-forming bacteria.

Spatial isolation and environmental factors drive distinct bacterial and archaeal communities in different types of petroleum reservoirs in China

To investigate the spatial distribution of microbial communities and their drivers in petroleum reservoir environments, we performed pyrosequencing of microbial partial 16S rRNA, derived from 20 geographically separated water-flooding reservoirs, and two reservoirs that had not been flooded, in China. The results indicated that distinct underground microbial communities inhabited the different reservoirs. Compared with the bacteria, archaeal alpha-diversity was not strongly correlated with the environmental variables. The variation of the bacterial and archaeal community compositions was affected synthetically, by the mining patterns, spatial isolation, reservoir temperature, salinity and pH of the formation brine. The environmental factors explained 64.22% and 78.26% of the total variance for the bacterial and archaeal communities, respectively. Despite the diverse community compositions, shared populations (48 bacterial and 18 archaeal genera) were found and were dominant in most of the oilfields. Potential indigenous microorganisms, including Carboxydibrachium, Thermosinus, and Neptunomonas, were only detected in a reservoir that had not been flooded with water. This study indicates that: 1) the environmental variation drives distinct microbial communities in different reservoirs; 2) compared with the archaea, the bacterial communities were highly heterogeneous within and among the reservoirs; and 3) despite the community variation, some microorganisms are dominant in multiple petroleum reservoirs.

Sulfur Biogeochemistry of an Oil Sands Composite Tailings Deposit

Composite tailings (CT), an engineered, alkaline, saline mixture of oil sands tailings (FFT), processed sand and gypsum (CaSO₄; 1 kg CaSO₄ per m³ FFT) are used as a dry reclamation strategy in the Alberta Oil Sands Region (AOSR). It is estimated that 9.6 × 10⁸ m³ of CT are either in, or awaiting emplacement in surface pits within the AOSR, highlighting their potential global importance in sulfur cycling. Here, in the first CT sulfur biogeochemistry investigation, integrated geochemical, pyrosequencing and lipid analyses identified high aqueous concentrations of ∑H₂S (>300 μM) and highly altered sulfur compounds composition; low cell biomass (3.3 × 10⁶– 6.0 × 10⁶ cells g⁻¹) and modest bacterial diversity (H' range between 1.4 and 1.9) across 5 depths spanning 34 m of an in situ CT deposit. Pyrosequence results identified a total of 29,719 bacterial 16S rRNA gene sequences, representing 131 OTUs spanning19 phyla including 7 candidate divisions, not reported in oil sands tailings pond studies to date. Legacy FFT common phyla, notably, gamma and beta Proteobacteria, Firmicutes, Actinobacteria, and Chloroflexi were represented. However, overall CT microbial diversity and PLFA values were low relative to other contexts. The identified known sulfate/sulfur reducing bacteria constituted at most 2% of the abundance; however, over 90% of the 131 OTUs identified are capable of sulfur metabolism. While PCR biases caution against overinterpretation of pyrosequence surveys, bacterial sequence results identified here, align with phospholipid fatty acid (PLFA) and geochemical results. The highest bacterial diversities were associated with the depth of highest porewater [∑H₂S] (22–24 m) and joint porewater co-occurrence of Fe²⁺ and ∑H₂S (6–8 m). Three distinct bacterial community structure depths corresponded to CT porewater regions of (1) shallow evident Fe^(II) (<6 m), (2) co-occurring Fe^(II) and ∑H₂S (6–8 m) and (3) extensive ∑H₂S (6–34 m) (UniFrac). Candidate divisions GNO2, NKB19 and Spam were present only at 6–8 m associated with co-occurring [Fe^(II)] and [∑H₂S]. Collectively, results indicate that CT materials are differentiated from other sulfur rich environments by modestly diverse, low abundance, but highly sulfur active and more enigmatic communities (7 candidate divisions present within the 19 phyla identified).

S reactivity of an oil sands composite tailings deposit undergoing reclamation wetland construction

This study is the first to characterize the S stability of a composite tailings (CT) deposit undergoing pilot wetland reclamation in the Athabasca Oil Sands Region (AOSR, Alberta, Canada). As CT is sulfur, organic carbon and bacterially rich, the goal of this study was to characterize the in situ aqueous distribution of sulfur compounds across the wetland, sand cap and underlying CT zones of the deposit, in an effort to establish the potential for microbial sulfur cycling and generation of H2S, an explosive, corrosive and toxicity risk. Porewater samples from three depths spanning the different layers of the deposit, as well as wetland surface ponded water samples were collected for geochemical analyses (July and Sept 2013), and for microbial enrichments (both S reducing and S oxidizing bacteria) in June 2014. While porewater ΣH2S(aq) was detected at all depths across the three zones of the deposit, results identify that the sand cap layer required for construction, acts as a mixing zone generating the highest solution H2S concentrations (>500 uM or 18 mg/L) and H2S gas levels (over 100 and up to 180 ppm) observed. Porewater dissolved sulfate concentrations (0.14-6.97 mM) were orders of magnitude higher and did not correlate to the observed distribution of ΣH2S concentrations throughout the deposit. Unique to the sandcap, dissolved organic carbon positively correlated with the observed maxima of ΣH2S(aq) seen in this layer. The water management of the deposit is a critical factor in the observed S trends. Active dewatering of the CT resulted in migration of S rich water up into the sandcap, while downwelling labile organic carbon from the developing wetland acted in concert to stimulate microbial generation of the H2S in this structural layer to the highest levels observed. Functional enrichments identified that diverse S reducing and oxidizing microbial metabolisms are widespread throughout the deposit, indicating that these waste materials are biogeochemically reactive with implications for longterm stability. These results are of relevance to both the oil sands region, as well as other mine contexts where S rich wastes occur, identifying the need to consider the potential bacterially driven cycling of S and C in the generation of constituents of concern, as well as the water management of such waste deposits to minimize risk.

Ability of Gordonia alkanivorans strain 1B for high added value carotenoids production

Currently, carotenoids are valuable bioactive molecules for several industries, such as chemical, pharmaceutical, food and cosmetics, due to their multiple benefits as natural colorants, antioxidants and vitamin precursors.

Enhanced rhamnolipid production of Pseudomonas aeruginosa SG by increasing copy number of rhlAB genes with modified promoter

Increasing the copy number of rhlAB genes with a modified promoter efficiently enhanced the production of rhamnolipid by P. aeruginosa.

Stimulation of an indigenous thermophillic anaerobic bacterial consortium for enhanced oil recovery

Production of gases, VFAs, solvents and surfactants was achieved by thermophilic methanogenic consortium TERIL63, showing reduction in surface tension from 69 to 35 dynes cm⁻¹. TERIL63 with an optimized nutrient recipe showed 15.49% EOR at 70 °C in a core flood study.

Tracing biogeochemical and microbial variability over a complete oil sand mining and recultivation process

Recultivation of disturbed oil sand mining areas is an issue of increasing importance. Nevertheless only little is known about the fate of organic matter, cell abundances and microbial community structures during oil sand processing, tailings management and initial soil development on reclamation sites. Thus the focus of this work is on biogeochemical changes of mined oil sands through the entire process chain until its use as substratum for newly developing soils on reclamation sites. Therefore, oil sand, mature fine tailings (MFTs) from tailings ponds and drying cells and tailings sand covered with peat-mineral mix (PMM) as part of land reclamation were analyzed. The sample set was selected to address the question whether changes in the above-mentioned biogeochemical parameters can be related to oil sand processing or biological processes and how these changes influence microbial activities and soil development. GC-MS analyses of oil-derived biomarkers reveal that these compounds remain unaffected by oil sand processing and biological activity. In contrast, changes in polycyclic aromatic hydrocarbon (PAH) abundance and pattern can be observed along the process chain. Especially naphthalenes, phenanthrenes and chrysenes are altered or absent on reclamation sites. Furthermore, root-bearing horizons on reclamation sites exhibit cell abundances at least ten times higher (10(8) to 10(9) cells g(-1)) than in oil sand and MFT samples (10(7) cells g(-1)) and show a higher diversity in their microbial community structure. Nitrate in the pore water and roots derived from the PMM seem to be the most important stimulants for microbial growth. The combined data show that the observed compositional changes are mostly related to biological activity and the addition of exogenous organic components (PMM), whereas oil extraction, tailings dewatering and compaction do not have significant influences on the evaluated compounds. Microbial community composition remains relatively stable through the entire process chain.