Developing a quantitative measurement system for assessing heterotopic ossification and monitoring the bioelectric metrics from electrically induced osseointegration in the residual limb of service members

Determining Which Combinatorial Combat-Relevant Factors Contribute to Heterotopic Ossification Formation in an Ovine Model

Traumatic heterotopic ossification (HO) is frequently observed in Service Members following combat-related trauma. Estimates suggest that ~65% of wounded warriors who suffer limb loss or major extremity trauma will experience some type of HO formation. The development of HO delays rehabilitation and can prevent the use of a prosthetic. To date there are limited data to suggest a standard mechanism for preventing HO. This may be due to inadequate animal models not producing a similar bone structure as human HO. We recently showed that traumatic HO growth is possible in an ovine model. Within that study, we demonstrated that 65% of sheep developed a human-relevant hybrid traumatic HO bone structure after being exposed to a combination of seven combat-relevant factors. Although HO formed, we did not determine which traumatic factor contributed most. Therefore, in this study, we performed individual and various combinations of surgical/traumatic factors to determine their individual contribution to HO growth. Outcomes showed that the presence of mature biofilm stimulated a large region of bone growth, while bone trauma resulted in a localized bone response as indicated by jagged bone at the linea aspera. However, it was not until the combinatory factors were included that an HO structure similar to that of humans formed more readily in 60% of the sheep. In conclusion, data suggested that traumatic HO growth can develop following various traumatic factors, but a combination of known instigators yields higher frequency size and consistency of ectopic bone.

Developing a combat-relevant translatable large animal model of heterotopic ossification

Heterotopic ossification (HO) refers to ectopic bone formation, typically in residual limbs following trauma and injury. A review of injuries from Operation Iraqi Freedom (OIF) and Operation Enduring Freedom (OEF) indicated that approximately 70% of war wounds involved the musculoskeletal system, largely in part from the use of improvised explosive devices (IED) and rocket-propelled grenades (RPG). HO is reported to occur in approximately 63%–65% of wounded warriors from OIF and OEF. Symptomatic HO may delay rehabilitation regimens since it often requires modifications to prosthetic limb componentry and socket size. There is limited evidence indicating a mechanism for preventing HO. This may be due to inadequate models, which do not produce HO bone structure that is morphologically similar to HO samples obtained from wounded warfighters injured in theatre. We hypothesized that using a high-power blast of air (shockwave) and simulated battlefield trauma (i.e. bone damage, tourniquet, bacteria, negative pressure wound therapy) in a large animal model, HO would form and have similar morphology to ectopic bone observed in clinical samples. Initial radiographic and micro-computed tomography (CT) data demonstrated ectopic bone growth in sheep 24 weeks post-procedure. Advanced histological and backscatter electron (BSE) analyses showed that 5 out of 8 (63%) sheep produced HO with similar morphology to clinical samples. We conclude that not all ectopic bone observed by radiograph or micro-CT in animal models is HO. Advanced histological and BSE analyses may improve confirmation of HO presence and morphology, which we demonstrated can be produced in a large animal model.

Changes in the extracellular microenvironment and osteogenic responses of mesenchymal stem/stromal cells induced by in vitro direct electrical stimulation

Electrical stimulation (ES) has potential to be an effective tool for bone injury treatment in clinics. However, the therapeutic mechanism associated with ES is still being discussed. This study aims to investigate the initial mechanism of action by characterising the physical and chemical changes in the extracellular environment during ES and correlate them with the responses of mesenchymal stem/stromal cells (MSCs). Computational modelling was used to estimate the electrical potentials relative to the cathode and the current density across the cell monolayer. We showed expression of phosphorylated ERK1/2, c-FOS, c-JUN, and SPP1 mRNAs, as well as the increased metabolic activities of MSCs at different time points. Moreover, the average of 2.5 μM of H₂O₂ and 34 μg/L of dissolved Pt were measured from the electrically stimulated media (ES media), which also corresponded with the increases in SPP1 mRNA expression and cell metabolic activities. The addition of sodium pyruvate to the ES media as an antioxidant did not alter the SPP1 mRNA expression, but eliminated an increase in cell metabolic activities induced by ES media treatment. These findings suggest that H₂O₂ was influencing cell metabolic activity, whereas SPP1 mRNA expression was regulated by other faradic by-products. This study reveals how different electrical stimulation regime alters cellular regenerative responses and the roles of faradic by-products, that might be used as a physical tool to guide and control cell behaviour.

System Setup to Deliver Air Impact Forces to a Sheep Limb: Preparation for Model Development of Blast-Related Heterotopic Ossification

Background

Heterotopic ossification (HO) is a significant complication for wounded warriors with traumatic limb loss. Although this pathologic condition negatively impacts the general population, ectopic bone has been observed with higher frequency for service members injured in Iraq and Afghanistan due to blast injuries. Several factors, including a traumatic insult, bioburden, tourniquet and wound vacuum usage, and bone fractures or fragments have been associated with increased HO for service members. A large combat-relevant animal model is needed to further understand ectopic bone etiology and develop new pragmatic solutions for reducing HO formation and recurrence.

Objective

This study outlines the optimization of a blast system that may be used to simulate combat-relevant trauma for HO and replicate percussion blast experienced in theater.

Methods

We tested the repeatability and reproducibility of an air impact device (AID) at various pressure settings and compared it with a model of blunt force trauma for HO induction. Furthermore, we assessed the ability of the higher-power air delivery system to injure host tissue, displace metal particulate, and disperse bone chips in cadaveric sheep limbs.

Results

Data demonstrated that the air delivery setup generated battlefield-relevant blast forces. When the AID was charged to 40, 80, and 100 psi, the outputs were 229 (SD 13) N, 778 (SD 50) N, and 1085 (SD 114) N, respectively, compared with the blunt force model which proposed only 168 (SD 11) N. For the 100-psi AID setup, the force equaled a 5.8-kg charge weight of trinitrotoluene at a standoff distance of approximately 2.62 m, which would replicate a dismounted improvised explosive device blast in theater. Dispersion data showed that the delivery system would have the ability to cause host tissue trauma and effectively disperse metal particulate and host bone chips in local musculature compared with the standard blunt force model (13 mm vs 2 mm).

Conclusions

Our data showed that a high-pressure AID was repeatable or reproducible, had the ability to function as a simulated battlefield blast that can model military HO scenarios, and will allow for factors including blast trauma to translate toward a large animal model.

Application of a mechanobiological algorithm to investigate mechanical mediation of heterotopic bone in trans-femoral amputees

Heterotopic ossification (HO) is the process of bone formation in tissues that are not usually osseous. It occurs in 60% of those with blast-related amputations. HO can result in reduced range of motion, pain, nerve impingement and can affect prosthesis fitting and is caused by a combination of mechanical, biological, local and systemic factors. As with normal bone formation and remodelling, it is expected that heterotopic bone responds to mechanical stimuli and understanding this relationship can give insight into the pathology. The objective of this research was to investigate whether a physiological 2D computational model that considers both mechanical and biological factors can be used to simulate HO in the residual limb of a trans-femoral amputee. The study found that characteristic morphologies of HO were reproduced by adjusting the loading environment. Significant effects were produced by changing the loading direction on the femur; this is potentially associated with different initial surgical interventions such as muscle myodesis. Also, initial treatment such as negative pressure through a dressing was found to change the shape of heterotopic bone.

Link Between Clinical Predictors of Heterotopic Ossification and Histological Analysis in Combat-Injured Service Members

BACKGROUND

Heterotopic ossification (HO) is a debilitating condition that occurs following traumatic injury and may restrict range of motion and delay rehabilitation. The timing and efficacy of surgical resection have varied widely, and there is a gap in knowledge between clinical predictors of HO recurrence and histological analysis.

METHODS

Thirty-three service members seen at Walter Reed National Military Medical Center for symptomatic HO were enrolled in an institutional review board-approved study. Participants took oxytetracycline on four scheduled days prior to HO resection to determine the mineral apposition rate (bone growth rate).

RESULTS

Detailed histological analyses included scanning electron microscopy with backscattered electron imaging and light microscopy. Data indicated that the mineral apposition rate of trauma-induced HO was approximately 1.7 μm/day at the time of operative intervention, which was 1.7 times higher than the rate in non-pathological human bone. The mineral apposition rate and postoperative alkaline phosphatase values were demonstrated to be positively and significantly related (ρ = 0.509, p = 0.026, n = 19). When the analysis was limited to patients with no more than a two-year period from injury to excision (thereby removing outliers who had a longer time period than their counterparts) and traumatic brain injury and nonsteroidal anti-inflammatory drugs (known correlates with HO development) were controlled for in the statistical analysis, the mineral apposition rate and recurrence severity were significantly related (ρ = -0.572, p = 0.041, n = 11).

CONCLUSIONS

Data demonstrated a link between benchtop research and bedside care, with the mineral apposition rate elevated in patients with HO and correlated with recurrence severity; however, a larger sample size and more clinical factors are needed to refine this model.

LEVEL OF EVIDENCE

Prognostic Level II. See Instructions for Authors for a complete description of levels of evidence.

Bedside, Benchtop, and Bioengineering: Physicochemical Imaging Techniques in Biomineralization

The need to quantify physicochemical properties of mineralization spans many fields. Clinicians, mineralization researchers, and bone tissue bioengineers need to be able to measure the distribution, quantity, and the mechanical and chemical properties of mineralization within a wide variety of substrates from injured muscle to electrospun polymer scaffolds and everything in between. The techniques available to measure these properties are highly diverse in terms of their complexity and utility. Therefore it is of the utmost importance that those who intend to use them have a clear understanding of the advantages and disadvantages of each technique and its appropriateness to their specific application. This review provides all of this information for each technique and uses heterotopic ossification and engineered bone substitutes as examples to illustrate how these techniques have been applied. In addition, we provide novel data using advanced techniques to analyze human samples of combat related heterotopic ossification.

Heterotopic ossification of the quadratus lumborum muscle

Heterotopic ossification is a benign process of mature laminar bone formation in the soft tissues. A synonymous term used to describe this pathology in muscle is myositis ossificans. The pathogenesis is unclear, but is likely multifactorial. The basic pathology is thought to be ectopic production of osseous tissue as part of a repair process in response to tissue injury. This report describes a case of heterotopic ossification of the quadratus lumborum muscle as an incidental finding. This case highlights that treatment is based on symptoms and conservative management might be appropriate for the asymptomatic patient.

Percutaneous osseointegrated prostheses for amputees: Limb compensation in a 12-month ovine model

Percutaneous osseointegrated prostheses are being investigated as an alternative strategy to attach prosthetic limbs to patients. Although the use of these implants has shown to be promising in clinical trials, the ability to maintain a skin seal around an osseointegrated implant interface is a major challenge to prevent superficial and deep periprosthetic infections. The specific aim of this study was to establish a translational load-bearing ovine model to assess postoperative limb compensation and gait symmetry following a percutaneous osseointegrated implant. We tested the following hypotheses: (1) the animals would return to pre-amputation limb loads within 12-months; (2) the animals would return to a symmetrical gait pattern (stride length and time in stance) within 12-months. The results demonstrated that one month following surgery, the sheep loaded their amputated limb to a mean value of nearly 80% of their pre-amputation loading condition; by 12-months, this mean had dropped to approximately 74%. There was no statistical differences between the symmetry of the amputated forelimb and the contralateral forelimb at any time point for the animals stride length or the time spent in the stance phase of their gait cycle. Thus, the data showed that while the animals maintained symmetric gait patterns, they did not return to full weight-bearing after 12-months. The results of this study showed that a large animal load-bearing model had a symmetric gait and was weight bearing for up to 12 months. While the current investigation utilizes an ovine model, the data show that osseointegrated implant technology with postoperative follow-up can help our human patients return to symmetric gait and maintain an active lifestyle, leading to an improvement in their quality of life following amputation.

Establishing multiscale models for simulating whole limb estimates of electric fields for osseointegrated implants

Although the survival rates of warfighters in recent conflicts are among the highest in military history, those who have sustained proximal limb amputations may present additional rehabilitation challenges. In some of these cases, traditional prosthetic limbs may not provide adequate function for service members returning to an active lifestyle. Osseointegration has emerged as an acknowledged treatment for those with limited residual limb length and those with skin issues associated with a socket together. Using this technology, direct skeletal attachment occurs between a transcutaneous osseointegrated implant (TOI) and the host bone, thereby eliminating the need for a socket. While reports from the first 100 patients with a TOI have been promising, some rehabilitation regimens require 12-18 months of restricted weight bearing to prevent overloading at the bone-implant interface. Electrically induced osseointegration has been proposed as an option for expediting periprosthetic fixation and preliminary studies have demonstrated the feasibility of adapting the TOI into a functional cathode. To assure safe and effective electric fields that are conducive for osseoinduction and osseointegration, we have developed multiscale modeling approaches to simulate the expected electric metrics at the bone-implant interface. We have used computed tomography scans and volume segmentation tools to create anatomically accurate models that clearly distinguish tissue parameters and serve as the basis for finite element analysis. This translational computational biological process has supported biomedical electrode design, implant placement, and experiments to date have demonstrated the clinical feasibility of electrically induced osseointegration.