Adsorption of graphene for the removal of inorganic pollutants in water purification: a review

Prevention is better than a cure: A 'zero residual nanoadsorbent toxicity' downstream from its effluent exit point

Here, we offer thoughts concerning a 'zero residual nanoadsorbent toxicity' environmental policy which we strongly advocate. Our discussions in support of this policy are based on the adage 'Prevention is better than cure'. Besides emphasizing the need for strict regulations (regional and international), research and development avenues are highlighted for the technology that can achieve 'zero tolerance' for residual nanoadsorbent levels escaping and building up in receiving ecosystems. We do not oppose nanoadsorbents. On the contrary, their water and wastewater purification potentials are well recognized. However, they should not be permitted to translocate downstream from the exit point of a final effluent.

Carbon and metal based magnetic porous materials - Role in drug removal: A Comprehensive review

Development of effective adsorbents for the removal of contaminants from wastewater is indispensable due to increasing water scarcity and a lack of pure drinking water, which are prevailing as a result of rapid industrialization and population growth. Recently, the development of new adsorbents and their effective use without generating secondary waste is receiving huge consideration. In order to protect the environment from primary and secondary pollution, the development of adsorbents from wastes and their recycling have become conventional practices aimed at waste management. As a result, significant progress has been made in the synthesis of new porous carbon and metal-organic frameworks as adsorbents, with the objective of using them for the removal of pollutants. While many different kinds of pollutants are produced in the environment, drug pollutants are the most vicious because of their tendency to undergo significant structural changes, producing metabolites and residues with entirely different properties compared to their parent compounds. Chemical reactions involving oxidation, hydrolysis, and photolysis transform drugs. The resulting compounds can have detrimental effects on living beings that are present in soil and water. This review stresses the development of adsorbents with adjustable porosities for the broad removal of primary drug pollutants and their metabolites, which are formed as a result of drug transformations in environmental matrices. This keeps adsorbents from building up in the environment and prevents them from becoming significant pollutants in the future. Additionally, it stops secondary pollution caused by the deterioration of the used adsorbents. Focus on the development of effective adsorbents with flexible porosities allows for the complete removal of coexisting contaminants and makes a substantial contribution to wastewater management. In order to concentrate more on the development of flexible pore adsorbents, it is crucial to comprehend the milestones reached in the research and applications of porous magnetic adsorbents based on metal and carbon, which are discussed here.

Starch-based hydrogels for environmental applications: A review

Water sources have become extremely scarce and contaminated by organic and inorganic industrial and agricultural pollutants as well as household wastes. Poisoning water resources by dyes and metals is a problem because contaminated water can leak into subsurface and surface sources, causing serious contamination and health problems. Therefore, developing wastewater treatment technologies is valuable. Today, hydrogels have attracted considerable attention owing to their broad applications. Hydrogels are polymeric network compositions with significant water-imbibing capacity. Hydrogels have potential applications in diverse fields such as biomedical, personal care products, pharmaceuticals, cosmetics, and biosensors. They can be prepared by using natural (biopolymers) and synthetic polymers. Synthetic polymer-based hydrogels obtained from petrochemicals are not environmentally benign; thus, abundant plant-based polysaccharides are found as more suitable compounds for making biodegradable hydrogels. Polysaccharides with many advantages such as non-toxicity, biodegradability, availability, inexpensiveness, etc. are widely employed for the preparation of environmentally friendly hydrogels. Polysaccharides-based hydrogels containing chitin, chitosan, gum, starch (St), etc. are employed to remove pollutants, metals, and dyes. Among these, St has attracted a lot of attention. St can be mixed with other compounds to make hydrogels, which remove dyes and metal ions to variable degrees of efficiency. Although St has numerous advantages, it suffers from drawbacks such as low stability, low water solubility, and fast degradability in water which limit its application as an environmental adsorbent. As an effective way to overcome these weaknesses, various modification approaches to form starch-based hydrogels (SBHs) employing different compounds have been reported. The preparation methods and applications of SBH adsorbents in organic dyes, hazardous materials, and toxic ions elimination from water resources have been comprehensively discussed in this review.

Size-controlled synthesis of La and chitosan doped cobalt selenide nanostructures for catalytic and antibacterial activity with molecular docking analysis

Co-precipitation method was adopted to synthesize ternary heterostructure catalysts La/CS-CoSe NSs (lanthanum/chitosan‑cobalt selenide nanostructures) without the use of a surfactant. During synthesis, a fixed amount (3 wt%) of CS was doped with 2 and 4 wt% La to control the growth, recombination rate and stability of CoSe NSs. The doped samples served to enhance the surface area, porosity and active sites for catalytic degradation of rhodamine B dye and antibacterial potential against Staphylococcus aureus (S. aureus). Additionally, the synthesized catalysts were examined for morphological, structural and optical characteristics to assess the influence of dopants to CoSe. XRD spectra verified the hexagonal and cubic structure of CoSe, whereas the porosity of the undoped sample (CoSe) increased from 45 to 60 % upon incorporation of dopants (La and Cs). Among the samples analyzed during this study, 4 % La/CS-CoSe exhibited significant bactericidal behavior as well as the highest catalytic reduction of rhodamine B dye in a neutral environment. Molecular docking analysis was employed to elucidate the underlying mechanism behind the bactericidal activity exhibited by CS-CoSe and La/CS-CoSe NSs against DHFRS. aureus and DNA gyraseS. aureus.

Performant removal of creatinine using few-layer-graphene/alginate beads as a kidney filter

Reduction of renal function, such as creatinine adsorption is one of the most common and dangerous diseases. Dedicated to this issue, developing high-performance, sustainable, and bio-compatible adsorbing materials is still challenging. Herein, barium alginate (BA) and BA containing few-layer graphene (FLG/BA) beads were synthesized in water from sodium alginate, also acting as bio-surfactant in in-situ exfoliation of graphite to FLG. The physicochemical characteristics of the beads demonstrated an excess of barium chloride used as a cross-linker. The efficiency and sorption capacity (Q_e) of creatinine removal increase with processing duration reaching 82.1, 99.5 %, and 68.4, 82.9 mg·g^-1 for BA and FLG/BA, respectively. The thermodynamic parameters detect the enthalpy change (ΔH°) of about -24.29 and -36.11 kJ·mol^-1 and the entropy change (ΔS°) of around -69.24 and -79.46 kJ·mol^-1 for BA and FLG/BA, respectively. During the reusability test, the removal efficiency decreases from the optimal first cycle to 69.1 and to 88.3 % in the sixth cycle for BA and FLG/BA, revealing superior stability of FLG/BA. The MD calculations confirm a higher adsorption capacity of FLG/BA composite compared to BA alone, clearly confirming a strong structure-property relation.

Low-cost biosorption of Fe(II) and Fe(III) from single and binary solutions using Ulva lactuca-derived cellulose nanocrystals-graphene oxide composite film

The marine algal biomass of Ulva lactuca was utilized for the extraction of cellulose and the development of cellulose nanocrystals/graphene oxide film. Cellulose nanocrystals with 50-150 nm were produced by H₂SO₄ hydrolysis of the algal cellulose. The adsorption efficiency of the nanocomposite film for Fe(II) and Fe(III) ions was successfully evaluated using Box-Behnken design. The maximum removal for Fe(II) (64.15%) could be attained at pH 5.13, adsorbent dosage 7.93 g L^-1 and Fe(II) concentration 15.39 mg L^-1, while the biosorption of Fe(III) was 69.92% at pH 5.0, adsorbent dosage 2 g L^-1, and Fe(III) concentration 15.0 mg L^-1. However, in the binary system, the removal efficiency of Fe(II) was enhanced to 95.48% at Fe(II):Fe(III) ratio of 1:1, while the Fe(III) removal was increased to 79.17% at ratio 1:2. The pseudo-second-order kinetics exhibited better fitting to the experimental results of Fe(II) and Fe(III) adsorption in both single and binary systems. The intra-particle diffusion was prominent during the biosorption, but the effect of the external mass transfer was significant. The Langmuir, Freundlich, Langmuir-Freundlich, Temkin, and Dubinin-Radushkevich isotherms showed satisfactory fitting to the experimental data, but they differ in priority based on iron state and pH. The adsorption of Fe(II) in the presence of Fe(III) in a mixture was best represented by the extended Langmuir model, while the extended Langmuir-Freundlich model best fitted the adsorption of Fe(III). The FT-IR analysis indicated that physisorption through electrostatic interaction/complexation is the predominant mechanism for the adsorption of iron using the nanocomposite film.

Effect of Functional Group Modifications on the Photocatalytic Performance of g-C3 N4

In recent years, photocatalysis has received increasing attention in alleviating energy scarcity and environmental treatment, and graphite carbon nitride (g-C₃ N₄ ) is used as an ideal photocatalyst. However, it still remains numerous challenges to obtain the desirable photocatalytic performance of intrinsic g-C₃ N₄ . Functional group functionalization, formed by introducing functional groups into the bulk structure, is one of the common modification techniques to modulate the carrier dynamics and increases the number of active sites, offering new opportunities to break the limits for structure-to-performance relationship of g-C₃ N₄ . Nevertheless, the general overview of the advance of functional group modification of g-C₃ N₄ is less reported yet. In order to better understand the structure-to-performance relationship at the molecular level, a review of the latest development of functional group modification is urgently needed. In this review, the functional group modification of g-C₃ N₄ in terms of structures, properties, and photocatalytic activity is mainly focused, as well as their mechanism of reaction from the molecular level insights is explained. Second, the recent progress of the application of introducing functional groups in g-C₃ N₄ is introduced and examples are given. Finally, the difficulties and challenges are presented, and based on this, an outlook on the future research development direction is shown.

Geopolymer composite spheres derived from graphene-modified fly ash/slag: Facile synthesis and removal of lead ions in wastewater

Geopolymer composite spheres derived from potassium-activated graphene-modified slag/fly ash powder were produced in a polyethylene glycol (PEG 400) solvent. The effect of graphene type (graphene oxide (GO) and few-layered graphene (GNP)) on the pore structure and lead ions (Pb²⁺) removal performance of the spheres were evaluated. The results showed that the composite spheres modified with GOs (0.1-0.4 wt%) and GNPs (1-4 wt%) could be spheroidized with an improved performance to adsorb Pb²⁺ in solution. The graphene-containing spheres reached a maximum BET surface area of 68.85 m²/g. Pseudo-second-order and Langmuir isotherm models could express the adsorption process, which was controlled by both monolayer adsorption and chemisorption. The obtained spheres also showed high adsorption capacities for Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ ions. Chemical, physical, electrostatic, ion exchange and cation-π interaction were attributed to the adsorption mechanism of the spheres. The spheres showed good cycling ability compared to those without graphene, which had potential application in heavy metal wastewater treatment.

Recent advances in new generation nanocomposite materials for adsorption of pharmaceuticals from aqueous environment

With rapid increase in the human population, a large amount of wastewater is generated every year. The availability of fresh water is decreasing at an alarming rate due to rapid industrialization and agricultural development. Pharmaceutical drugs which are credited for improving standards of life worldwide have emerged as major water contaminants, raising global concern about their potential risk to human health and environment. The presence of pharmaceutical compounds is detected in surface water (sea, river, lakes, etc.), groundwater, effluents from municipal, hospitals, and wastewater treatment plants, and even in drinking water. Efficient removal of pharmaceutical pollutants still remains a challenging task. Many techniques, including photodegradation, photocatalysis, oxidation, reverse osmosis, biodegradation, nanofiltration, adsorption, etc., have been used for the remediation of wastewater. Adsorption of pharmaceutical compounds on nanoadsorbents, as a low-cost and feasible technology, has gained immense popularity for wastewater treatment over the last decade. Adsorption techniques can be integrated with wastewater treatment plants to achieve efficient removal on an industrial level. Herein, we review the literature on the remediation techniques used for the pharmaceutical waste treatment using carbon nanotubes, metal oxides, nanoclay, and new-generation MXenes via adsorption. These materials show excellent adsorptive properties owing to their high surface area, low cost, high porosity, easy functionalization, and high surface reactivity. The adsorption mechanism of the nanoadsorbents and their reusability as a factor of sustainability have also been included in the review. The factors affecting the adsorption, including pH, the concentration of adsorbate, ionic strength, and adsorbate dose, have also been discussed.

Magnetic nanocomposite adsorbents for abatement of arsenic species from water and wastewater

The presence of high concentrations of arsenic species in drinking water and other water bodies has become one of the most critical environmental concerns. Therefore, decontamination of arsenic-containing water is essential for improved health and environmental concern. In recent years, nano-adsorbents have been widely used for the adsorptive removal of arsenic from water. Separating existing nano-adsorbents from treated waters, on the other hand, is a critical issue for their potential applications in natural water treatment. To address these issues and to effectively remove arsenic from water, researchers looked at iron oxide-based magnetic nanocomposite adsorbents. The magnetic nanoadsorbents have the benefit of surface functionalization, making it easier to target a specific pollutant for adsorption, and magnetic separation. In addition, magnetic nanoparticles have a large surface area, high chemical inertness, superparamagnetic, high magnetic susceptibility, small particle size, and large specific surface area, and are especially easily separated in a magnetic field. Magnetic nano-adsorbents have been discovered to have a lot of potential for eliminating arsenic from water. The recent advances in magnetic nano-absorbents for the cleanup of arsenic species from water are summarized in this paper. Future perspectives and directions were also discussed in this article. This will help budding researchers for the further advancement of magnetic nanocomposites for the treatment of water and wastewater contaminated with arsenic.

A comprehensive study on aquatic chemistry, health risk and remediation techniques of cadmium in groundwater

Cadmium (Cd), a non-essential trace element, it's intrusion in groundwater has ubiquitous implications on the environment and human health. This review is an approach to comprehensively emphasize on i) chemistry and occurrence of Cd in groundwater and its concomitant response on human health ii) sustainable Cd remediation techniques, iii) and associated costs. Current study is depending on meta-analysis of Cd contaminations in groundwater and discusses its distributions around the globe. Literature review primarily comprises from the last three decades online electronic published database, which mainly includes i) research literatures, ii) government reports. On the basis of meta-data, it was concluded that Cd mobility depends on multiple factors: such as pH, redox state, and ionic strength, dissolved organic (DOC) and inorganic carbon (DIC). A substantially high Cd concentration has been reported in Lagos, Nigeria (0.130 mg/L). In India, groundwater is continuing to be contaminated by Cd in the proximity of industrial, agricultural areas, high concentrations (>8.20 mg/L) were reported in Tamil Nadu and Maharashtra. Depending on chemical behavior and ionic radius cadmium disseminate into the food chain and ultimately cause health hazard that can be measured by various index-based assessment tools. Instead of chemical adsorbents, nanoparticles, phytoextraction, and bioremediation techniques can be very useful in the remediation and management of Cd polluted groundwater at a low-cost. For Cd pollution, the development of a comprehensive framework that links the hydro-geological, bio-geochemical processes to public health is important and need to be further studied.

Synthesis of carbon-based nanomaterials and their application in pollution management

With the fast development of industry, large amounts of organic and inorganic pollutants are inevitably released into the natural environment, which results in the pollution of the environment and are thereby dangerous to human health. The efficient elimination of these pollutants is crucial to environment protection and human health. The high sorption capacity of carbon-based materials and high photocatalytic ability of carbon-based composites result in the application of carbon-based materials in environmental pollution cleanup. In this review article, we summarized recent studies on the synthesis of carbon-based materials, and their application in the sorption of organic and inorganic pollutants, the photocatalytic degradation of organic pollutants, and the in situ photocatalytic reduction-solidification of heavy metal ions. The sorption method is useful to remove pollutants from aqueous solutions. The sorption-photocatalytic degradation of organic pollutants is applicable, especially at low concentrations, whereas the catalytic reduction of metal ions is the best method for the in situ immobilization of high valent metal ions under complicated conditions. The interaction mechanism is discussed using advanced spectroscopy analysis and theoretical calculations, and at the end the challenges in the future are described.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.

Reduced graphene oxide (rGO) aerogel: Efficient adsorbent for the elimination of antimony (III) and (V) from wastewater

3D porous, thin sheet-like rGO aerogel was fabricated to explore its antimony (Sb) removal potential from wastewater. Langmuir isothermal and pseudo-second-order kinetic model best-suited the adsorption process. The maximum adsorption capacities were 168.59 and 206.72 mg/g for Sb (III and V) at pH 6.0 respectively. The thermodynamic parameters designated the process to be thermodynamically spontaneous, endothermic reaction, a result of dissociative chemisorption. The rGO aerogel bestowed good selectively among competing ions and reusability with 95% efficiency. rGO posed excellent practicability with Sb-spiked tap water and fixed-bed column experiments showing 97.6% of Sb (III) (3.6 μg/L) and 96.8% of Sb (V) (4.7 μg/L) removal from tap water and from fixed column bed experiments breakthrough volumes (BV) for the Sb (III) and Sb (V) ions were noted to be 540 BV and 925 BV respectively, until 5 ppb, which are below the requirement of MCL for Sb in drinking water (6 μg/L). XPS and DFT analyses explained adsorption mechanism and depicted a higher affinity of Sb (V) towards rGO surface than Sb (III).

Treatment of Wastewaters with Zirconium Phosphate Based Materials: A Review on Efficient Systems for the Removal of Heavy Metal and Dye Water Pollutants

Layered zirconium phosphate (ZrP) is a versatile material with phosphate (POH ) groups able to exchange inorganic and organic cations or to intercalate basic molecules. The present review deals with the use of this material as a sorbent for heavy metal cations or dye molecules in wastewater treatments. The possibility to combine ZrP with polymers or other inorganic materials, in order to have suitable systems for real and large scale applications, was investigated, as well as the combination with photocatalytic materials to obtain hetrogeneous photocatalysts for the capture and photodegradation of organic dye molecules.

Adsorption-photocatalysis performance of polyaniline/dicarboxyl acid cellulose@graphene oxide for dye removal

A novel 3-D biopolymer-based adsorption-photocatalytic composite, polyaniline/dicarboxyl acid cellulose@graphene oxide was synthesized and was employed to remove the reactive brilliant red K-2G from aqueous solution. The addition of dicarboxyl acid cellulose could improve the morphology, structure, stability and dispersity of the nanocomposite, thus providing excellent adsorption and photocatalysis performance to the product. Batch of experiments were conducted in two scenarios: adsorption followed by photocatalysis process and simultaneous adsorption-photocatalysis process. For the first scenario, adsorption equilibrium can be reached within 25 min, the expected adsorption capacity was 447.0 mg·g^-1; the subsequent photocatalysis process was carried out under light irradiation and the removal capacity could further improve to 729.0 mg·g^-1 under equilibrium state (about 180 min). For the simultaneous adsorption-photocatalytic process, the removal capacity was about 558.1 mg·g^-1 at about 25 min and the total removal capacity could reach to 733.3 mg·g^-1 under equilibrium state. PANI-DCC@GO exhibited excellent reusability and had potential in the treatment of dyes polluted wastewater.

Graphene-based materials for adsorptive removal of pollutants from water and underlying interaction mechanism

Graphene-based materials have received much attention as attractive candidates for the adsorptive removal of pollutants from water due to their large surface area and diverse active sites for adsorption. The design of graphene-based adsorbents for target pollutants is based on the underlying adsorption mechanisms. Understanding the adsorption performance of graphene-based materials and its correlation to the interaction mechanisms between the pollutants and adsorbents is crucial to the further development of graphene-based functional materials and their practical applications. This review summarizes recent advances on the development of graphene-based materials for the adsorption of heavy metal ions, dyes, and oils, and the co-adsorption of their mixture from water. The material design, performance, regeneration and reuse of adsorbents, and the associated adsorption mechanisms are discussed. Various techniques for mechanistic studies of the adsorption of heavy metal ions, dyes, and oils on graphene-based materials are highlighted. The remaining challenges and perspectives for future development and investigation of graphene-based materials as adsorbents are also presented.

Synthesis of a novel arginine-modified starch resin and its adsorption of dye wastewater

In this work, corn starch (St) was firstly grafted with polyacrylamide (PAM) to obtain StAM, which was subsequently immobilized with arginine to obtain a guanidine-containing starch-based resin, StAM–Arg. The synthesized products were characterized via Fourier transform infrared spectroscopy (FT-IR), ¹³C-NMR nuclear magnetic resonance (¹³C-NMR), scanning electron microscopy (SEM), X-ray diffraction (XRD), gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). StAM–Arg exhibited a significantly enhanced adsorption capacity for acid fuchsin (AF), acid orange G (AOG), and acid blue 80 (AB80) compared with zeolite, diatomite, St and StAM, and it also exhibited broad-spectrum adsorption for different dyes. Weak acidic conditions were favorable for the resin to adsorb acid dyes. The decolorization rate (DR) by StAM–Arg for mixed wastewater reached 82.49%, which was higher than that of activated carbon (DR = 58.09%). StAM–Arg showed high resistance to microbial degradation, resulting in significantly improved structural stability for the resin. Its antibacterial rate (AR) for E. coli was up to 99.73%. After 7 days in simulated natural water, the weight loss ratio (WR) of StAM–Arg was 14.5%, which was much lower than that of St (WR = 66.53%). The introduced guanidine groups were considered to be the major reason for the observed improvements. Furthermore, the cationic guanidine could trap the acid dyes via ion-exchange reactions, while effectively inhibiting or eliminating the growth of bacteria on the adsorbent surface. The above advantages, including good dyestuff adsorption properties, high structural stability and prolonged service life, make StAM–Arg overcome the inherent drawbacks of the existing natural polymer adsorbents and have good application prospect in the treatment of textile wastewater.

In the side reaction, the two aldehyde groups in the glutaraldehyde molecules should undergo an aldol condensation reaction with the hydroxyl group in the starch molecule, which has been corrected.

Pesticides in aquatic environments and their removal by adsorption methods

Although pesticides are widely used in agriculture, industry and households, they pose a risk to human health and ecosystems. Based on target organisms, the main types of pesticides are herbicides, insecticides and fungicides, of which herbicides accounted for 46% of the total pesticide usage worldwide. The movement of pesticides into water bodies occurs through run-off, spray drift, leaching, and sub-surface drainage, all of which have negative impacts on aquatic environments and humans. We sought to define the critical factors affecting the fluxes of contaminants into receiving waters. We also aimed to specify the feasibility of using sorbents to remove pesticides from waterways. In Karun River in Iran (1.21 × 10⁵ ng/L), pesticide concentrations are above regulatory limits. The concentration of pesticides in fish can reach 26.1 × 10³ μg/kg, specifically methoxychlor herbicide in Perca fluviatilis in Lithuania. During the last years, research has focused on elimination of organic pollutants, such as pesticides, from aqueous solution. Pesticide adsorption onto low-cost materials can effectively remediate contaminated waters. In particular, nanoparticle adsorbents and carbon-based adsorbents exhibit high performance (nearly 100%) in removing pesticides from water bodies.

Mitigation of environmentally-related hazardous pollutants from water matrices using nanostructured materials - A review

An unprecedented rise in population growth and rapid worldwide industrial development are associated with the increasing discharge of a range of toxic and baleful compounds. These toxic pollutants including dyes, endocrine-disrupters, heavy metals, personal care products, and pharmaceuticals are destructing nature's balance and intensifying environmental toxicity at a disquieting rate. Therefore, finding better, novel and more environmentally sound approaches for wastewater remediation are of great importance. Nanoscale materials have opened up some new horizons in various fields of science and technology. Among a range of treatment technologies, nanostructured materials have recently received incredible interest as an emerging platform for wastewater remediation owing to their exceptional surface-area-to-volume ratio, unique electrical and chemical properties, quantum size effects, high scalability, and tunable surface functionalities. An array of nanomaterials including noble metal-based nanostructures, transition metal oxide nanomaterials, carbon-based nanomaterials, carbon nanotubes, and graphene/graphene oxide nanomaterials to their novel nanocomposites and nanoconjugates have been attempted as the promising catalysts to overcome environmental dilemmas. In this review, we summarized recent advances in nanostructured materials that are particularly engineered for the remediation of environmental contaminants. The toxicity of various classes of relevant tailored nanomaterials towards human health and the ecosystem along with perspectives is also presented. In our opinion, an overview of the up-to-date advancements on this emerging topic may provide new ideas and thoughts for engineering low-cost and highly-efficient nanostructured materials for the abatement of recalcitrant pollutants for a sustainable environment.

Release of graphene-related materials from epoxy-based composites: characterization, quantification and hazard assessment in vitro

Due to their mechanical strength, thermal stability and electrical conductivity, graphene-related materials (GRMs) have been extensively explored for various applications. Moreover, GRMs have been studied and applied as fillers in polymer composite manufacturing to enhance the polymer performance. With the foreseen growth in GRM production, occupational and consumer exposure is inevitable, thus raising concerns for potential health risks. Therefore, this study aims (1) to characterize aerosol particles released after mechanical abrasion on GRM-reinforced epoxy composites, (2) to quantify the amounts of protruding and free-standing GRMs in the abraded particles and (3) to assess the potential effects of the pristine GRMs as well as the abraded particles on human macrophages differentiated from the THP-1 cell line in vitro. GRMs used in this study included graphene nanoplatelets (GNPs), graphene oxide (GO), and reduced graphene oxide (rGO). All types of pristine GRMs tested induced a dose-dependent increase in reactive oxygen species formation, but a decrease in cell viability was only detected for large GNPs at high concentrations (20 and 40 μg mL^-1). The particle modes measured using a scanning mobility particle sizer (SMPS) were 300-400 nm and using an aerodynamic particle sizer (APS) were between 2-3 μm, indicating the release of respirable particles. A significant fraction (51% to 92%) of the GRMs embedded in the epoxy composites was released in the form of free-standing or protruding GRMs in the abraded particles. The abraded particles did not induce any acute cytotoxic effects.

Synthesis of Three-Dimensional Graphene-Based Hybrid Materials for Water Purification: A Review

Graphene-based nanostructures and nanomaterials have been widely used for the applications in materials science, biomedicine, tissue engineering, sensors, energy, catalysis, and environmental science due to their unique physical, chemical, and electronic properties. Compared to two-dimensional (2D) graphene materials, three-dimensional (3D) graphene-based hybrid materials (GBHMs) exhibited higher surface area and special porous structure, making them excellent candidates for practical applications in water purification. In this work, we present recent advances in the synthesis and water remediation applications of 3D GBHMs. More details on the synthesis strategies of GBHMs, the water treatment techniques, and the adsorption/removal of various pollutants from water systems with GBHMs are demonstrated and discussed. It is expected that this work will attract wide interests on the structural design and facile synthesis of novel 3D GBHMs, and promote the advanced applications of 3D GBHMs in energy and environmental fields.

Qualitative and Quantitative Analysis of Graphene-Based Adsorbents in Wastewater Treatment

Nowadays water bodies across the world are heavily polluted due to uncontrollable contamination of heavy metal particles, toxic dyes, and other harmful wastes discharged by emerging industries other than normal domestic wastages. This contamination needs sufficient control to protect the natural water bodies. There are various methodologies to be followed to perform wastewater treatment, in which the adsorption method of filtration is found to be efficient. The adsorption method is a high priority and preferable filtration method compared to other waste water treatment methods due to its peculiar characteristics. Considering the adsorption method, there are multiple options available in selecting material and methodology for the filtration process. In selecting the filtering material, there is much attraction towards graphene and its oxides, which have widespread range of differential applications in commercial industries because of their eco-friendly characteristic features. The importance of various graphene composites and their chemical properties is found to be significant in various fields. Analyzing the adsorbing properties of graphene widely, this article deeply reviews about the improvements and the technologies identified for using graphene and (GO) graphene oxide in wastewater treatment taken into discussion elaborately. Therefore, in this hard review, the advantages and demerits of using graphene for wastewater treatment as well as improving its properties to make it more suitable for wastewater treatment are detailed.

Synthesis and characterization of magnetic graphene oxide for arsenic removal from aqueous solution

A magnetic graphene oxide (MGO) was developed for the adsorption of As(III) from aqueous solution. The characteristics of MGO were investigated using Fourier-transform infrared (FTIR), X-ray diffraction and field emission scanning electron microscope-E/energy-dispersive X-ray analyses. Batch adsorption experiments were designed using central composite design, and the effects of adsorbent dosage, pH, contact time and concentration of As(III) were investigated. The MGO showed an excellent performance, removing up to 99.95% of As(III) under the following condition: initial As(III) concentration = 100 mg/L, pH = 7, adsorbent dosage = 0.3 g/L and contact time = 77 min. MGO dosage and initial pH were the most significant parameters influencing the process performance. FTIR analysis of the used adsorbent confirms the adsorption of As(III) through complexation between surface functional groups of the MGO and the oxyanions of As(III). The adsorbent maintained a significant level of performance even after four cycles of adsorption. Thus, the developed MGO has the potential to be used for the abatement of arsenic pollution.

Electrochemical Evaluation of Selenium (IV) Removal from Its Aqueous Solutions by Unmodified and Modified Graphene Oxide

The removal of selenium from superficial and waste water is a worldwide problem. The maximum limit according to the World Health Organization (WHO) for the selenium in the water is set at a concentration of 10 μg/L. Carbon based adsorbents have attracted much attention and recently demonstrated promising performance in removal of selenium. In this work, several materials (iron oxide based microparticles and graphene oxides materials) and their composites were prepared to remove Se(IV) from water. The graphene oxides were prepared according to the simplified Hummer's method. In addition, the effect of pH, contact time and initial Se(IV) concentration was tested. An electrochemical method such as the differential pulse cathodic stripping voltammetry was used to determine the residual selenium concentration. From the experimental data, Langmuir adsorption model was used to calculate the maximum adsorption capacity. Graphene oxide particles modified by iron oxide based microparticles was the most promising material for the removal of Se(IV) from its aqueous solution at pH 2.0. Its adsorption efficiency reached more than 90% for a solution with given Se(IV) concentration, meanwhile its maximal recorded adsorption capacity was 18.69 mg/g.

Removal of Arsenic(III) from Aqueous Solution Using Metal Organic Framework-Graphene Oxide Nanocomposite

MIL-53(Al)-graphene oxide (GO) nanocomposites of different GO to MIL-53(Al) mass ratios (1% to 25% GO) were synthesized and tested for removal of arsenite (As(III)), which is a well-known groundwater contaminant. The properties of MIL-53(Al)-GO nanocomposites were characterized using X-ray Diffraction (XRD), Fourier Transform Infrared (FT-IR) Spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurements, and Scanning Electron Microscopy (SEM). Batch experiments were performed on MIL-53(Al)-GO nanocomposites for As(III) adsorption in aqueous solutions to investigate adsorption kinetics and isotherm behavior under varying environmental conditions. The effects of solution pH (2 to 11), initial As(III) concentrations (10–110 mg/L), adsorbent dosage (0.2–3.0 g/L), and temperature (298–318 K) on As(III) adsorption were investigated. MIL-53(Al)-GO nanocomposites showed higher adsorption of As(III) than pristine MIL-53(Al) and GO individually. As (III) removal was optimized at a ratio of 3% GO in the MIL-53(Al)-GO nanocomposite, with an adsorption capacity of 65 mg/g. The adsorption kinetics and isotherms followed pseudo-second-order and Langmuir isotherm models, respectively. Overall, these results suggest that MIL-53(Al)-GO nanocomposite holds a significant promise for use in the remediation of As (III) from groundwater and other aqueous solutions.

Treatment of Wastewater Using Seaweed: A Review

Inadequately treated or untreated wastewater greatly contribute to the release of unwanted toxic contaminants into water bodies. Some of these contaminants are persistent and bioaccumulative, becoming a great concern as they are released into the environment. Despite the abundance of wastewater treatment technologies, the adsorption method overall has proven to be an excellent way to treat wastewater from multiple industry sources. Because of its significant benefits, i.e., easy availability, handling, and higher efficiency with a low cost relative to other treatments, adsorption is opted as the best method to be used. However, biosorption using naturally found seaweeds has been proven to have promising results in removing pollutants, such as dyes from textile, paper, and the printing industry, nitrogen, and phosphorous and phenolic compounds, as well as heavy metals from various sources. Due to its ecofriendly nature together with the availability and inexpensiveness of raw materials, biosorption via seaweed has become an alternative to the existing technologies in removing these pollutants from wastewater effectively. In this article, the use of low-cost adsorbent (seaweed) for the removal of pollutants from wastewater has been reviewed. An extensive table summarises the applicability of seaweed in treating wastewater. Literature reported that the majority of research used simulated wastewater and minor attention has been given to biosorption using seaweed in the treatment of real wastewater.

Titanium Dioxide/Graphene and Titanium Dioxide/Graphene Oxide Nanocomposites: Synthesis, Characterization and Photocatalytic Applications for Water Decontamination

The use of titanium dioxide, TiO2 as a photocatalyst in water decontamination has witnessed continuous interest due to its efficiency, stability, low toxicity and cost-effectiveness. TiO2 use is limited by its large band gap energy leading to light absorbance in the UV region of the spectrum, and by the relatively fast rate of recombination of photogenerated electrons and positive holes. Both limitations can be mitigated by using carbon-TiO2 nanocomposites, such as those based on graphene (G) and graphene oxide (GO). Relative to bare TiO2, these nanocomposites have improved photocatalytic activity and stability under the UV–visible light, constituting a promising way forward for improved TiO2 photocatalytic performance. This review focuses on the recent developments in the chemistry of TiO2/G and TiO2/GO nanocomposites. It addresses the mechanistic fundamentals, briefly, of TiO2 and TiO2/G and TiO2/GO photocatalysts, the various synthesis strategies for preparing TiO2/G and TiO2/GO nanocomposites, and the different characterization techniques used to study TiO2/G and TiO2/GO nanocomposites. Some applications of the use of TiO2/G and TiO2/GO nanocomposites in water decontamination are included.

A review of the applications of organo-functionalized magnetic graphene oxide nanocomposites for heavy metal adsorption

Graphene-based adsorbents have attracted wide interests as effective adsorbents for heavy metals removal from the environment. Due to their excellent electrical, mechanical, optical and transport properties, graphene and its derivatives such as graphene oxide (GO) have found various applications. However, in many applications, surface modification is necessary as pristine graphene/GO may be ineffective in some specific applications such as adsorption of heavy metal ions. Consequently, the modification of graphene/GO using various metals and non-metals is an ongoing research effort in the carbon-material realm. The use of organic materials represents an economical and environmentally friendly approach in modifying GO for environmental applications such as heavy metal adsorption. This review discusses the applications of organo-functionalized GO composites for the adsorption of heavy metals. The aspects reviewed include the commonly used organic materials for modifying GO, the performance of the modified composites in heavy metals adsorption, effects of operational parameters, adsorption mechanisms and kinetic, as well as the stability of the adsorbents. Despite the significant research efforts on GO modification, many aspects such as the interaction between the functional groups and the heavy metal ions, and the quantitative effect of the functional groups are yet to be fully understood. The review, therefore, offers some perspectives on the future research needs.

Expanding the environmental applications of metal (Al, Ti, Mn, Fe) doped graphene: adsorption and removal of 1,4-dioxane

The potential applications of Al, Ti, Mn and Fe-doped graphene for environmental remediation of 1,4-dioxane (a critical pollutant and toxic compound) are analyzed in detail in the framework of density functional theory calculations. 1,4-Dioxane is a highly mobile and soluble pollutant and developing new strategies for its adsorption and subsequent removal becomes an important issue. All the systems were fully optimized and analyzed in their most stable spin states. The results determined that the proposed doped-graphene materials enhance the interaction with 1,4-dioxane compared to intrinsic graphene, with adsorption energies in the range of 1.2-1.6 eV. The high stability of the adsorbent-dioxane interactions is fully discussed in terms of chemical metal-dioxane binding, charge transfer and long-range interactions. The adsorbent-dioxane adsorption is also accompanied by changes in the electronic structure with respect to the isolated substrates, which are larger for Mn and Fe as dopants. Ab initio molecular dynamics simulations also show that the adsorbent-adsorbate interactions remain strong at room temperature (300 K). Finally, implicit/explicit solvent methodologies were implemented to get insights into the effects of aqueous environments on the adsorption strength, which shows the high stability of interaction in water, sorting the sorption efficiency as AlG ≈ FeG > MnG ≈ TiG. From these new insights, Al, Ti, Mn and Fe-doped graphene emerge as new potential materials to be applied in technologies related to the removal of 1,4-dioxane.

Distinct interface behaviors of Ni(ii) on graphene oxide and oxidized carbon nanotubes triggered by different topological aggregations

Although carbon nanotubes can be described as a seamlessly curled graphene nanosheet, two-dimensional graphene oxide (GO) and one-dimensional oxidized carbon nanotubes (OCNTs) have different fates and environmental risks, such as deposition, degradation and cytotoxicity. In particular, coexisting heavy metal ions (HMs) trigger distinct morphological transformations of both of these carbon derivatives. In addition, these morphological transformations can change the interface behaviors of HMs on both of these materials. In this study, the differences in the morphological changes of GO and OCNTs and the interface behaviors of Ni(ii) were explored via the intrinsically microscopic structural changes of both of these typical carbon materials. Batch experiments revealed that Ni(ii) sorption on GO drastically decreased with increasing ionic strength, while it was almost independent of ionic strength on the OCNTs. This phenomenon is attributed to the aggregation and wrinkling of GO sheets at higher Na⁺ concentrations, resulting in a decrease in the GO surface area and number of sorption sites. Meanwhile, the intertwining aggregations of OCNTs still ensured that the sorption sites were naked. For the first time, Ni²⁺ ions were observed to persist as inner-sphere complexes on GO even under alkaline conditions, where the Ni(OH)₂(s) phase was determined on the OCNTs. This could be attributed to the fact that the fast aggregation of GO, which fixed Ni²⁺ ions into the interlayers, inhibited the nucleation of Ni(OH)₂. Stable layered structures of GO aggregations were difficult to exfoliate, leading to a decreased release of Ni(ii) from GO with increasing Ni(ii) loading. For the OCNTs, naked Ni²⁺ ions could be easily and effectively released. These findings are critical to assess the mobility, transformation and cytotoxicity of nanomaterials and HMs in aquatic environments.

Adsorption of aniline from aqueous solution using graphene oxide-modified attapulgite composites

Adsorption is an efficient treatment method for aniline removal in water treatment.

Graphene-based materials supported advanced oxidation processes for water and wastewater treatment: a review

Advanced oxidation processes (AOPs) received much attention in the field of water and wastewater treatment due to its ability to mineralize persistent organic pollutants from water medium. The addition of graphene-based materials increased the efficiency of all AOPs significantly. The present review analyzes the performance of graphene-based materials that supported AOPs in detail. Recent developments in this field are highlighted. A special focus has been awarded for the performance enhancement mechanism of AOPs in the presence of graphene-based materials.

Removal of endrin and dieldrin isomeric pesticides through stereoselective adsorption behavior on the graphene oxide-magnetic nanoparticles

A novel stereoselective removal behavior of isomeric endrin and dieldrin pesticides from sample solution is demonstrated using nanocomposite of graphene oxide (GO) and iron oxide (Fe₃O₄) magnetic nanoparticles (MNPs). The removal efficiency of endrin and dieldrin was found higher when GO-MNPs was used as a separating probe than the individual use of GO and MNPs. The removal efficiency of both the pesticides was found to be more favorable when the dosage amount of GO-MNPs was 30 mg for 30-min contact time with pH 4.0 at room temperature. The good correlation of determination (R ²) with 0.975 and 0.973 values obtained for endrin and dieldrin, respectively demonstrated a well fitting of Langmuir adsorption isotherm model. The higher removal percentage (86.0%) and higher slope value of Langmuir adsorption isotherm were estimated for endrin compared to dieldrin (74.0%). The reason for higher adsorption percentage of endrin is due to the endo-position of oxygen atom in molecule favors more interaction of molecules with GO-MNPs compared to the exo-position of oxygen present in dieldrin. In addition, the higher value of R ² for endrin and dieldrin demonstrated better suitability of pseudo-first-order and pseudo-second-order kinetic models, respectively. The advantages of the present method are use of simple UV-vis spectrophotometry for monitoring and low-cost use of GO-MNPs nanomaterial for the removal of pesticides from sample solution.