Air-liquid interface biofilm formation by psychrotrophic pseudomonads recovered from spoilt meat

Extracellular host DNA contributes to pathogenic biofilm formation during periodontitis

Introduction

Periodontal diseases are known to be associated with polymicrobial biofilms and inflammasome activation. A deeper understanding of the subgingival cytological (micro) landscape, the role of extracellular DNA (eDNA) during periodontitis, and contribution of the host immune eDNA to inflammasome persistence, may improve our understanding of the mechanisms underlaying severe forms of periodontitis.

Methods

In this work, subgingival biolfilms developing on biologically neutral polyethylene terephthalate films placed in gingival cavities of patients with chronic periodontitis were investigated by confocal laser scanning microscopy (CLSM). This allowed examination of realistic cytological landscapes and visualization of extracellular polymeric substances (EPS) including amyloids, total proteins, carbohydrates and eDNA, as well as comparison with several single-strain in vitro model biofilms produced by oral pathogens such as Klebsiella pneumoniae, Pseudomonas aeruginosa, Staphylococcus aureus, Streptococcus gordonii, S. sanguinis and S. mitis. Fluorescence in situ hybridization (FISH) analysis was also used to identify eDNA derived from eubacteria, streptococci and members of the Bacteroides-Porphyromonas-Prevotella (BPP) group associated with periodontitis.

Results

Analysis of subgingival biofilm EPS revealed low levels of amyloids and high levels of eDNA which appears to be the main matrix component. However, bacterial eDNA contributed less than a third of the total eDNA observed, suggesting that host-derived eDNA released in neutrophil extracellular traps may be of more importance in the development of biofilms causing periodontitis.

Discussion

eDNA derived from host immunocompetent cells activated at the onset of periodontitis may therefore be a major driver of bacterial persistence and pathogenesis.

An overview of various methods for in vitro biofilm formation: a review

Biofilms are widely present in the natural environment and are difficult to remove as they are a survival strategy of microorganisms. Thus, the importance of studying biofilms is being increasingly recognized in food, medical, dental, and water quality-related industries. While research on biofilm detection methods is actively progressing, research on biofilm formation is not progressing rapidly. Moreover, there are few standardized methods because biofilm formation is affected by various factors. However, comprehensive knowledge of biofilm formation is essential to select a suitable method for research purposes. To better understand the various in vitro biofilm formation methods, the principles and characteristics of each method are explained in this review by dividing the methods into static and dynamic systems. In addition, the applications of biofilm research based on various assays are also discussed.

Investigating quorum-quenching marine bacilli as potential biocontrol agents for protection of shrimps against Early Mortality Syndrome (EMS)

Early Mortality Syndrome (EMS) has been a major problem for shrimp aquaculture in Southeast Asia due to its epizootic prevalence within the region since the first reported case in 2009. This study explores the application of halophilic marine bacilli isolated from coral mucus and their quorum-quenching abilities as potential biocontrol agents in aquaculture systems to combat the causative agent of EMS, Vibrio parahaemolyticus. N-acylhomoserine lactone (AHL)-degrading (AiiA) activity was first screened by PCR then confirmed by bio-reporter assay, and a combination of 16S rDNA sequence analysis and quantitative phenotype assays including biofilm-formation and temperature-growth responses were used to demonstrate diversity amongst these quorum-quenching isolates. Three phenotypically distinct strains showing notable potential were chosen to undergo co-cultivation as a method for strain improvement via long term exposure to the pathogenic V. parahaemolyticus. The novel approach taken led to significant improvements in antagonism and quorum quenching activities as compared to the ancestral wild-type strains and offers a potential solution as well as pathway to improve existing beneficial microbes for one of the most pressing issues in shrimp aquacultures worldwide.

eDNA Provides a Scaffold for Autoaggregation of B. subtilis in Bacterioplankton Suspension

The self-binding of bacterial cells, or autoaggregation, is, together with surface colonization, one of the first steps in the formation of a mature biofilm. In this work, the autoaggregation of B. subtilis in dilute bacterial suspensions was studied. The dynamics of cell lysis, eDNA release, and bacterial autoaggregate assembly were determined and related to the spatial autocorrelation of bacterial cells in dilute planktonic bacterial suspensions. The non-random distribution of cells was associated with an eDNA network, which stabilized the initial bacterial cell-cell aggregates. Upon the addition of DNase I, the aggregates were dispersed. The release of eDNA during cell lysis allows for the entrapment of bacterial drifters at a radius several times the size of the dying bacteria. The size of bacterial aggregates increased from 2 to about 100 μm in diameter in dilute bacterial suspensions. The results suggest that B. subtilis cells form previously unnoticed continuum of autoaggregate structures during planktonic growth.

eDNA, Amyloid Fibers and Membrane Vesicles Identified in Pseudomonas fluorescens SBW25 Biofilms

Pseudomonas fluorescens SBW25 is a model soil- and plant-associated bacterium capable of forming a variety of air-liquid interface biofilms in experimental microcosms and on plant surfaces. Previous investigations have shown that cellulose is the primary structural matrix component in the robust and well-attached Wrinkly Spreader biofilm, as well as in the fragile Viscous Mass biofilm. Here, we demonstrate that both biofilms include extracellular DNA (eDNA) which can be visualized using confocal laser scanning microscopy (CLSM), quantified by absorbance measurements, and degraded by DNase I treatment. This eDNA plays an important role in cell attachment and biofilm development. However, exogenous high-molecular-weight DNA appears to decrease the strength and attachment levels of mature Wrinkly Spreader biofilms, whereas low-molecular-weight DNA appears to have little effect. Further investigation with CLSM using an amyloid-specific fluorophore suggests that the Wrinkly Spreader biofilm might also include Fap fibers, which might be involved in attachment and contribute to biofilm strength. The robust nature of the Wrinkly Spreader biofilm also allowed us, using MALDI-TOF mass spectrometry, to identify matrix-associated proteins unable to diffuse out of the structure, as well as membrane vesicles which had a different protein profile compared to the matrix-associated proteins. CLSM and DNase I treatment suggest that some vesicles were also associated with eDNA. These findings add to our understanding of the matrix components in this model pseudomonad, and, as found in other biofilms, biofilm-specific products and material from lysed cells contribute to these structures through a range of complex interactions.

Evaluation of non-traditional visualization methods to detect surface attachment of biofilms

In food safety and food quality, biofilm research is of great importance for mitigating food-borne pathogens in food processing environments. To supplement the traditional staining techniques for biofilm characterization, we introduce several non-traditional imaging methods for detecting biofilm attachment to the solid-liquid and air-liquid interfaces. For strains of Pseudomonas aeruginosa (the positive control), Acinetobacter baumanii, Listeria monocytogenes and Salmonella enterica, the traditional crystal violet assay showed evidence of biofilm attachment to the well plate base as well as inferred the presence of an air-liquid biofilm attached on the upper well walls where the meniscus was present. However, air-liquid biofilms and solid-surface-attached biofilms were not detected for all of these strains using the non-traditional imaging methods. For L. monocytogenes, we were unable to detect biofilms at a particle-laden, air-liquid interface as evidenced through microscopy, which contradicts the meniscus staining test and suggests that the coffee-ring effect may lead to false positives when using meniscus staining. Furthermore, when L. monocytogenes was cultivated in a pendant droplet in air, only microbial sediment at the droplet apex was observed without any apparent bacterial colonization of the droplet surface. All other strains showed clear evidence of air-liquid biofilms at the air-liquid interface of a pendant droplet. To non-invasively detect if and when air-liquid pellicles form in a well plate, we also present a novel in situ reflection assay that demonstrates the capacity to do this quantitatively.

Evaluation of storage methods of beef by microbiological and chemical indicators

Meat and meat products are a major part of a person's ration. However, due to their high nutritional value, they are a favorable environment for the development of microorganisms and require refrigerated storage. The purpose of this work was to evaluate the storage methods for refrigerated and frozen beef by microbiological and chemical parameters and to suggest criteria for evaluating beef by the content of psychrotrophic microorganisms. It was found out that the storage of beef meat with an initial mesophilic bacterial content of about 4.88 log CFU.cm-2 of surface and psychrotrophic bacteria 3.79 log CFU.cm-2 at temperature 0 °C is only possible for 8 days, further, the microbiological indices exceed the acceptable standards. Investigation of the dynamics of microflora reproduction during the storage of beef in the frozen state at temperature -2 to -3 °C for 20 days established a decrease in 1.3 times the number of mesophilic bacteria in 10 days of storage. At the same time, the number of psychrotrophic microorganisms during this storage time was increased in 4.5 times, and 20 days in 7.9 times and amounted to 5.3 log CFU.cm-2 of surface area. This indicates that the storage of meat in the frozen state inhibits or completely stops the development of mesophilic microorganisms for 20 days. It was found out that storing of beef in the cooled state at a temperature of 0 ±0.5 °C for more than eight days is impractical, as its biochemical indices are worsening and signs of spoilage are appearing. At the same time, storing of beef in the frozen state at a temperature of -2 to -3 °C for 20 days does not cause such significant biochemical changes as in beef stored in the cooled state at a temperature of 0 ±0.5 °C for 16 days. Therefore, we have experimentally substantiated the quantitative indicators of the content of psychrotrophic microorganisms on the surface of beef intended for storage in a cooled or frozen state. The proposed microbiological criteria will improve the safety of beef.

Slr4, a newly identified S-layer protein from marine Gammaproteobacteria, is a major biofilm matrix component

S‐layers are paracrystalline proteinaceous lattices that surround prokaryotic cells, forming a critical interface between the cells and their extracellular environment. Here, we report the discovery of a novel S‐layer protein present in the Gram‐negative marine organism, Pseudoalteromonas tunicata D2. An uncharacterized protein (EAR28894) was identified as the most abundant protein in planktonic cultures and biofilms. Bioinformatic methods predicted a beta‐helical structure for EAR28894 similar to the Caulobacter S‐layer protein, RsaA, despite sharing less than 20% sequence identity. Transmission electron microscopy revealed that purified EAR28894 protein assembled into paracrystalline sheets with a unique square lattice symmetry and a unit cell spacing of ~9.1 nm. An S‐layer was found surrounding the outer membrane in wild‐type cells and completely removed from cells in an EAR28894 deletion mutant. S‐layer material also appeared to be “shed” from wild‐type cells and was highly abundant in the extracellular matrix where it is associated with outer membrane vesicles and other matrix components. EAR28894 and its homologs form a new family of S‐layer proteins that are widely distributed in Gammaproteobacteria including species of Pseudoalteromonas and Vibrio, and found exclusively in marine metagenomes. We propose the name Slr4 for this novel protein family.

Three biofilm types produced by a model pseudomonad are differentiated by structural characteristics and fitness advantage

Model bacterial biofilm systems suggest that bacteria produce one type of biofilm, which is then modified by environmental and physiological factors, although the diversification of developing populations might result in the appearance of adaptive mutants producing altered structures with improved fitness advantage. Here we compare the air-liquid (A-L) interface viscous mass (VM) biofilm produced by Pseudomonas fluorescens SBW25 and the wrinkly spreader (WS) and complementary biofilm-forming strain (CBFS) biofilm types produced by adaptive SBW25 mutants in order to better understand the link between these physical structures and the fitness advantage they provide in experimental microcosms. WS, CBFS and VM biofilms can be differentiated by strength, attachment levels and rheology, as well as by strain characteristics associated with biofilm formation. Competitive fitness assays demonstrate that they provide similar advantages under static growth conditions but respond differently to increasing levels of physical disturbance. Pairwise competitions between biofilms suggest that these strains must be competing for at least two growth-limiting resources at the A-L interface, most probably O₂ and nutrients, although VM and CBFS cells located lower down in the liquid column might provide an additional fitness advantage through the colonization of a less competitive zone below the biofilm. Our comparison of different SBW25 biofilm types illustrates more generally how varied biofilm characteristics and fitness advantage could become among adaptive mutants arising from an ancestral biofilm-forming strain and raises the question of how significant these changes might be in a range of medical, biotechnological and industrial contexts where diversification and change may be problematic.

Penetrating the air-liquid interface is the key to colonization and wrinkly spreader fitness

In radiating populations of Pseudomonas fluorescens SBW25, adaptive wrinkly spreader (WS) mutants are able to gain access to the air-liquid (A-L) interface of static liquid microcosms and achieve a significant competitive fitness advantage over other non-biofilm-forming competitors. Aerotaxis and flagella-based swimming allows SBW25 cells to move into the high-O₂ region located at the top of the liquid column and maintain their position by countering the effects of random cell diffusion, convection and disturbance (i.e. physical displacement). However, wild-type cells showed significantly lower levels of enrichment in this region compared to the archetypal WS, indicating that WS cells employ an additional mechanism to transfer to the A-L interface where displacement is no longer an issue and a biofilm can develop at the top of the liquid column. Preliminary experiments suggest that this might be achieved through the expression of an as yet unidentified surface active agent that is weakly associated with WS cells and alters liquid surface tension, as determined by quantitative tensiometry. The effect of physical displacement on the colonization of the high-O₂ region and A-L interface was reduced through the addition of agar or polyethylene glycol to increase liquid viscosity, and under these conditions the competitive fitness of the WS was significantly reduced. These observations suggest that the ability to transfer to the A-L interface from the high-O₂ region and remain there without further expenditure of energy (through, for example, the deployment of flagella) is a key evolutionary innovation of the WS, as it allows subsequent biofilm development and significant population increase, thereby affording these adaptive mutants a competitive fitness advantage over non-biofilm-forming competitors located within the liquid column.

Community biofilm-formation, stratification and productivity in serially-transferred microcosms

The establishment of O2 gradients in liquid columns by bacterial metabolic activity produces a spatially-structured environment. This produces a high-O2 region at the top that represents an un-occupied niche which could be colonised by biofilm-competent strains. We have used this to develop an experimental model system using soil-wash inocula and a serial-transfer approach to investigate changes in community-based biofilm-formation and productivity. This involved 10 transfers of mixed-community or biofilm-only samples over a total of 10-60 days incubation. In all final-transfer communities the ability to form biofilms was retained, though in longer incubations the build-up of toxic metabolites limited productivity. Measurements of microcosm productivity, biofilm-strength and attachment levels were used to assess community-aggregated traits which showed changes at both the community and individual-strain levels. Final-transfer communities were stratified with strains demonstrating a plastic phenotype when migrating between the high and low-O2 regions. The majority of community productivity came from the O2-depleted region rather than the top of the liquid column. This model system illustrates the complexity we expect to see in natural biofilm-forming communities. The connection between biofilms and the liquid column seen here has important implications for how these structures form and respond to selective pressure.

Myrtenol Attenuates MRSA Biofilm and Virulence by Suppressing sarA Expression Dynamism

Methicillin-resistant Staphylococcus aureus (MRSA) is a deleterious human pathogen responsible for severe morbidity and mortality worldwide. The pathogen has attained high priority in the World Health Organization (WHO) - Multidrug-resistant (MDR) pathogens list. Emerging MDR strains of S. aureus are clinically challenging due to failure in conventional antibiotic therapy. Biofilm formation is one of the underlying mechanisms behind the antibiotic resistance. Hence, attenuating biofilm formation has become an alternative strategy to control persistent infections. The current study is probably the first that focuses on the antibiofilm and antivirulence potential of myrtenol against MRSA and its clinical isolates. Myrtenol exhibited a concentration-dependent biofilm inhibition without causing any harmful effect on cell growth and viability. Further, microscopic analysis validated the biofilm inhibitory efficacy of myrtenol against MRSA. In addition, myrtenol inhibited the synthesis of major virulence factors including slime, lipase, α-hemolysin, staphyloxanthin and autolysin. Inhibition of staphyloxanthin in turn sensitized the MRSA cells to healthy human blood and hydrogen peroxide (H2O2). Notably, myrtenol treated cells were deficient in extracellular DNA (eDNA) mediated autoaggregation as eDNA releasing autolysis was impaired by myrtenol. Biofilm disruptive activity on preformed biofilms was observed at concentrations higher than minimum biofilm inhibitory concentration (MBIC) of myrtenol. Also, the non-cytotoxic effect of myrtenol on human peripheral blood mononuclear cell (PBMC) was evidenced by trypan blue and Alamar blue assays. Transcriptional analysis unveiled the down-regulation of global regulator sarA and sarA mediated virulence genes upon myrtenol treatment, which is well correlated with results of phenotypic assays. Thus, the results of the present study revealed the sarA mediated antibiofilm and antivirulence potential of myrtenol against MRSA.

Visualization and characterization of Pseudomonas syringae pv. tomato DC3000 pellicles

Cellulose, whose production is controlled by c-di-GMP, is a commonly found exopolysaccharide in bacterial biofilms. Pseudomonas syringae pv. tomato (Pto) DC3000, a model organism for molecular studies of plant-pathogen interactions, carries the wssABCDEFGHI operon for the synthesis of acetylated cellulose. The high intracellular levels of the second messenger c-di-GMP induced by the overexpression of the heterologous diguanylate cyclase PleD stimulate cellulose production and enhance air-liquid biofilm (pellicle) formation. To characterize the mechanisms involved in Pto DC3000 pellicle formation, we studied this process using mutants lacking flagella, biosurfactant or different extracellular matrix components, and compared the pellicles produced in the absence and in the presence of PleD. We have discovered that neither alginate nor the biosurfactant syringafactin are needed for their formation, whereas cellulose and flagella are important but not essential. We have also observed that the high c-di-GMP levels conferred more cohesion to Pto cells within the pellicle and induced the formation of intracellular inclusion bodies and extracellular fibres and vesicles. Since the pellicles were very labile and this greatly hindered their handling and processing for microscopy, we have also developed new methods to collect and process them for scanning and transmission electron microscopy. These techniques open up new perspectives for the analysis of fragile biofilms in other bacterial strains.

Control of pellicle biogenesis involves the diguanylate cyclases PdgA and PdgB, the c-di-GMP binding protein MxdA and the chemotaxis response regulator CheY3 in Shewanella oneidensis

Shewanella oneidensis is an aquatic proteobacterium with remarkable respiratory and chemotactic abilities. It is also capable of forming biofilms either associated to surfaces (SSA-biofilm) or at the air-liquid interface (pellicle). We have previously shown that pellicle biogenesis in S. oneidensis requires the flagellum and the chemotaxis regulatory system including CheA3 kinase and CheY3 response regulator. Here we searched for additional factors involved in pellicle development. Using a multicopy library of S. oneidensis chromosomal fragments, we identified two genes encoding putative diguanylate cyclases (pdgA and pdgB) and allowing pellicle formation in the non-pellicle-forming cheY3-deleted mutant. A mutant deleted of both pdgA and pdgB is affected during pellicle development. By overexpressing phosphodiesterase encoding genes, we confirmed the key role of c-di-GMP in pellicle biogenesis. The mxd operon, previously proposed to encode proteins involved in exopolysaccharide biosynthesis, is also essential for pellicle formation. In addition, we showed that the MxdA protein, containing a degenerate GGDEF motif, binds c-di-GMP and interacts with both CheY3 and PdgA. Therefore, we propose that pellicle biogenesis in S. oneidensis is controlled by a complex pathway that involves the chemotaxis response regulator CheY3, the two putative diguanylate cyclases PdgA and PdgB, and the c-di-GMP binding protein MxdA.

Circular pellicles formed by Pseudomonas alkylphenolica KL28 are a sophisticated architecture principally designed by matrix substance

The colonization of liquid surfaces as floating biofilms or pellicles is a bacterial adaptation to optimally occupy the airliquid (A-L) niche. In aerobic heterotrophs, pellicle formation is beneficial for the utilization of O₂ and nonpolar organic compounds. Pseudomonas alkylphenolica KL28, an alkylphenol degrader, forms flat circular pellicles that are 0.3-0.5 mm in diameter. In this study, we first monitored the pellicle developmental patterns of multicellular organization from the initial settlement stage. The pellicles developed by clonal growth and mutants for flagella and pilus formation established normal pellicles. In contrast, the mutants of an epm gene cluster for biosynthesis of alginate-like polymer were incompetent in cell alignment for initial two-dimensional (2D) pellicle growth, suggesting the role of the Epm polymer as a structural scaffold for pellicle biofilms. Microscopic observation revealed that the initial 2D growth transited to multilayers by an accumulated self-produced extracellular polymeric substance that may exert a constraint force. Electron microscopy and confocal laser scanning microscopy revealed that the fully matured pellicle structures were densly packed with matrix-encased cells displaying distinct arrangements. The cells on the surface of the pellicle were relatively flat, and those inside were longitudinally cross-packed. The extracellular polysaccharide stained by Congo red was denser on the pellicle rim and a thin film was observed in the open spaces, indicative of its role in pellicle flotation. Our results demonstrate that P. alkylphenolica KL28 coordinately dictates the cell arrangements of pellicle biofilms by the controlled growth of constituent cells that accumulate extracellular polymeric substances.

Adaptive radiation of Pseudomonas fluorescens SBW25 in experimental microcosms provides an understanding of the evolutionary ecology and molecular biology of A-L interface biofilm formation

Combined experimental evolutionary and molecular biology approaches have been used to investigate the adaptive radiation of Pseudomonas fluorescens SBW25 in static microcosms leading to the colonisation of the air-liquid interface by biofilm-forming mutants such as the Wrinkly Spreader (WS). In these microcosms, the ecosystem engineering of the early wild-type colonists establishes the niche space for subsequent WS evolution and colonisation. Random WS mutations occurring in the developing population that deregulate diguanylate cyclases and c-di-GMP homeostasis result in cellulose-based biofilms at the air-liquid interface. These structures allow Wrinkly Spreaders to intercept O2 diffusing into the liquid column and limit the growth of competitors lower down. As the biofilm matures, competition increasingly occurs between WS lineages, and niche divergence within the biofilm may support further diversification before system failure when the structure finally sinks. A combination of pleiotropic and epistasis effects, as well as secondary mutations, may explain variations in WS phenotype and fitness. Understanding how mutations subvert regulatory networks to express intrinsic genome potential and key innovations providing a selective advantage in novel environments is key to understanding the versatility of bacteria, and how selection and ecological opportunity can rapidly lead to substantive changes in phenotype and in community structure and function.

Biofilm formation and cellulose expression by Bordetella avium 197N, the causative agent of bordetellosis in birds and an opportunistic respiratory pathogen in humans

Although bacterial cellulose synthase (bcs) operons are widespread within the Proteobacteria phylum, subunits required for the partial-acetylation of the polymer appear to be restricted to a few γ-group soil, plant-associated and phytopathogenic pseudomonads, including Pseudomonas fluorescens SBW25 and several Pseudomonas syringae pathovars. However, a bcs operon with acetylation subunits has also been annotated in the unrelated β-group respiratory pathogen, Bordetella avium 197N. Our comparison of subunit protein sequences and GC content analyses confirms the close similarity between the B. avium 197N and pseudomonad operons and suggests that, in both cases, the cellulose synthase and acetylation subunits were acquired as a single unit. Using static liquid microcosms, we can confirm that B. avium 197N expresses low levels of cellulose in air-liquid interface biofilms and that biofilm strength and attachment levels could be increased by elevating c-di-GMP levels like the pseudomonads, but cellulose was not required for biofilm formation itself. The finding that B. avium 197N is capable of producing cellulose from a highly-conserved, but relatively uncommon bcs operon raises the question of what functional role this modified polymer plays during the infection of the upper respiratory tract or survival between hosts, and what environmental signals control its production.

New Insights into the Effects of Several Environmental Parameters on the Relative Fitness of a Numerically Dominant Class of Evolved Niche Specialist

Adaptive radiation in bacteria has been investigated using Wrinkly Spreaders (WS), a morphotype which colonises the air-liquid (A-L) interface of static microcosms by biofilm formation with a significant fitness advantage over competitors growing lower down in the O₂-limited liquid column. Here, we investigate several environmental parameters which impact the ecological opportunity that the Wrinkly Spreaders exploit in this model system. Manipulation of surface area/volume ratios suggests that the size of the WS niche was not as important as the ability to dominate the A-L interface and restrict competitor growth. The value of this niche to the Wrinkly Spreaders, as determined by competitive fitness assays, was found to increase as O₂ flux to the A-L interface was reduced, confirming that competition for O₂ was the main driver of WS fitness. The effect of O₂ on fitness was also found to be dependent on the availability of nutrients, reflecting the need to take up both for optimal growth. Finally, the meniscus trap, a high-O₂ region formed by the interaction of the A-L interface with the vial walls, was also important for fitness during the early stages of biofilm formation. These findings reveal the complexity of this seemingly simple model system and illustrate how changes in environmental physicality alter ecological opportunity and the fitness of the adaptive morphotype.

Biofilm Formation Characteristics of Pseudomonas lundensis Isolated from Meat

Biofilms formations of spoilage and pathogenic bacteria on food or food contact surfaces have attracted increasing attention. These events may lead to a higher risk of food spoilage and foodborne disease transmission. While Pseudomonas lundensis is one of the most important bacteria that cause spoilage in chilled meat, its capability for biofilm formation has been seldom reported. Here, we investigated biofilm formation characteristics of P. lundensis mainly by using crystal violet staining, and confocal laser scanning microscopy (CLSM). The swarming and swimming motility, biofilm formation in different temperatures (30, 10, and 4 °C) and the protease activity of the target strain were also assessed. The results showed that P. lundensis showed a typical surface-associated motility and was quite capable of forming biofilms in different temperatures (30, 10, and 4 °C). The strain began to adhere to the contact surfaces and form biofilms early in the 4 to 6 h. The biofilms began to be formed in massive amounts after 12 h at 30 °C, and the extracellular polysaccharides increased as the biofilm structure developed. Compared with at 30 °C, more biofilms were formed at 4 and 10 °C even by a low bacterial density. The protease activity in the biofilm was significantly correlated with the biofilm formation. Moreover, the protease activity in biofilm was significantly higher than that of the corresponding planktonic cultures after cultured 12 h at 30 °C.

A spectroscopic study on U(VI) biomineralization in cultivated Pseudomonas fluorescens biofilms isolated from granitic aquifers

The interaction between the Pseudomonas fluorescens biofilm and U(VI) were studied using extended X-ray absorption fine structure spectroscopy (EXAFS), and time-resolved laser fluorescence spectroscopy (TRLFS). In EXAFS studies, the formation of a stable uranyl phosphate mineral, similar to autunite (Ca[UO2]2[PO4]2•2-6H2O) or meta-autunite (Ca[UO2]2[PO4]2•10-12H2O) was observed. This is the first time such a biomineralization process has been observed in P. fluorescens. Biomineralization occurs due to phosphate release from the cellular polyphosphate, likely as a cell's response to the added uranium. It differs significantly from the biosorption process occurring in the planktonic cells of the same strain. TRLFS studies of the uranium-contaminated nutrient medium identified aqueous Ca2UO2(CO3)3 and UO2(CO3)3 (4-) species, which in contrast to the biomineralization in the P. fluorescens biofilm, may contribute to the transport and migration of U(VI). The obtained results reveal that biofilms of P. fluorescens may play an important role in predicting the transport behavior of uranium in the environment. They will also contribute to the improvement of remediation methods in uranium-contaminated sites.

Gram-negative bacteria can also form pellicles

There is a growing interest in the bacterial pellicle, a biofilm floating at the air-liquid interface. Pellicles have been well studied in the Gram-positive bacterium Bacillus subtilis, but far less in Gram-negative bacteria, where pellicle studies have mostly focused on matrix components rather than on the regulatory cascades involved. Several Gram-negative bacteria, including pathogenic bacteria, have been shown to be able to form a pellicle under static conditions. Here, we summarize the growing body of knowledge about pellicle formation in Gram-negative bacteria, especially about the components of the pellicle matrix. We also propose that the pellicle is a specific biofilm, and that its formation involves particular processes. Since this lifestyle concerns a growing number of bacteria, its properties undoubtedly deserve further investigation.

Predicting the minimum liquid surface tension activity of pseudomonads expressing biosurfactants

Bacteria produce a variety of biosurfactants capable of significantly reducing liquid (aqueous) surface tension (γ) with a range of biological roles and biotechnological uses. To determine the lowest achievable surface tension (γMin ), we tested a diverse collection of Pseudomonas-like isolates from contaminated soil and activated sludge and identified those expressing biosurfactants by drop-collapse assay. Liquid surface tension-reducing ability was quantitatively determined by tensiometry, with 57 isolates found to significantly lower culture supernatant surface tensions to 24·5-49·1 mN m(-1) . Differences in biosurfactant behaviour determined by foaming, emulsion and oil-displacement assays were also observed amongst isolates producing surface tensions of 25-27 mN m(-1) , suggesting that a range of structurally diverse biosurfactants were being expressed. Individual distribution identification (IDI) analysis was used to identify the theoretical probability distribution that best fitted the surface tension data, which predicted a γMin of 24·24 mN m(-1) . This was in agreement with predictions based on earlier work of published mixed bacterial spp. data, suggesting a fundamental limit to the ability of bacterial biosurfactants to reduce surface tensions in aqueous systems. This implies a biological restriction on the synthesis and export of these agents or a physical-chemical restriction on their functioning once produced.

SIGNIFICANCE AND IMPACT OF THE STUDY

Numerous surveys of biosurfactant-producing bacteria have been conducted, but only recently has an attempt been made to predict the minimum liquid surface tension these surface-active agents can achieve. Here, we determine a theoretical minimum of 24 mN m(-1) by statistical analysis of tensiometry data, suggesting a fundamental limit for biosurfactant activity in bacterial cultures incubated under standard growth conditions. This raises a challenge to our understanding of biosurfactant expression, secretion and function, as well as being of interest to biotechnology where they are used in an increasingly wide range of applications.

Responses to elevated c-di-GMP levels in mutualistic and pathogenic plant-interacting bacteria

Despite a recent burst of research, knowledge on c-di-GMP signaling pathways remains largely fragmentary and molecular mechanisms of regulation and even c-di-GMP targets are yet unknown for most bacteria. Besides genomics or bioinformatics, accompanying alternative approaches are necessary to reveal c-di-GMP regulation in bacteria with complex lifestyles. We have approached this study by artificially altering the c-di-GMP economy of diverse pathogenic and mutualistic plant-interacting bacteria and examining the effects on the interaction with their respective host plants. Phytopathogenic Pseudomonas and symbiotic Rhizobium strains with enhanced levels of intracellular c-di-GMP displayed common free-living responses: reduction of motility, increased production of extracellular polysaccharides and enhanced biofilm formation. Regarding the interaction with the host plants, P. savastanoi pv. savastanoi cells containing high c-di-GMP levels formed larger knots on olive plants which, however, displayed reduced necrosis. In contrast, development of disease symptoms in P. syringae-tomato or P. syringae-bean interactions did not seem significantly affected by high c-di-GMP. On the other hand, increasing c-di-GMP levels in symbiotic R. etli and R. leguminosarum strains favoured the early stages of the interaction since enhanced adhesion to plant roots, but decreased symbiotic efficiency as plant growth and nitrogen contents were reduced. Our results remark the importance of c-di-GMP economy for plant-interacting bacteria and show the usefulness of our approach to reveal particular stages during plant-bacteria associations which are sensitive to changes in c-di-GMP levels.

A mechanistic explanation linking adaptive mutation, niche change, and fitness advantage for the wrinkly spreader

Experimental evolution studies have investigated adaptive radiation in static liquid microcosms using the environmental bacterium Pseudomonas fluorescens SBW25. In evolving populations a novel adaptive mutant known as the Wrinkly Spreader arises within days having significant fitness advantage over the ancestral strain. A molecular investigation of the Wrinkly Spreader has provided a mechanistic explanation linking mutation with fitness improvement through the production of a cellulose-based biofilm at the air-liquid interface. Colonisation of this niche provides greater access to oxygen, allowing faster growth than that possible for non-biofilm-forming competitors located in the lower anoxic region of the microcosm. Cellulose is probably normally used for attachment to plant and soil aggregate surfaces and to provide protection in dehydrating conditions. However, the evolutionary innovation of the Wrinkly Spreader in static microcosms is the use of cellulose as the matrix of a robust biofilm, and is achieved through mutations that deregulate multiple diguanylate cyclases leading to the over-production of cyclic-di-GMP and the stimulation of cellulose expression. The mechanistic explanation of the Wrinkly Spreader success is an exemplar of the modern evolutionary synthesis, linking molecular biology with evolutionary ecology, and provides an insight into the phenomenal ability of bacteria to adapt to novel environments.