Synthesis of nanophase hydroxyapatite by a Serratia sp. from waste-water containing inorganic phosphate

Research progress on microbial adsorption of radioactive nuclides in deep geological environments

Due to the development and utilization of nuclear energy, the safe disposal of nuclear waste needs to be urgently addressed. In recent years, the utilization of microorganisms' adsorption capacity to dispose of radioactive waste has received increasing attention. When compared with conventional disposal methods, microbial adsorption exhibits the characteristics of high efficiency, low cost, and no secondary pollution. In the long term, microbial biomass shows significant promise as specific chemical-binding agents. Optimization of biosorption conditions, identification of rare earth element binding sites, and studies on the sorption capacities of immobilized cells provide compelling reasons to consider biosorption for industrial applications in heavy metal removal from solutions. However, the interaction mechanism between microorganisms and radioactive nuclides is very complex. This mini-review briefly provides an overview of the preparation methods, factors affecting the adsorption capacity, and the mechanisms of microbial adsorbents.

Milking microalgae in conjugation with nano-biorefinery approach utilizing wastewater

In today's era, we need to replace chemical or physical processes of nanoparticle synthesis with biosynthesis processes to avoid environmental damage. These bioderived nanoparticles can help in addressing the problems of wastewater treatment and biofuels production. This review gives an insight into solving multiple problems using a nano-biorefinery approach in conjugation with wastewater treatment. The major advantage of using a bio-derivative method in nanoparticle synthesis is its low toxicity towards the environment. The current review discusses the development of nanoscience and its biogenic importance. It covers the usage of microalgae for (A) Nanoparticle's biosynthesis (B) Mechanism of nanoparticle biosynthesis (C) Nanoparticles in bio-refinery processes (D) Wastewater treatment with microalgae and bio-derived nanoparticles (E) A hypothetical mechanistic approach, which utilizes the photothermal effect of metallic nanoparticles to extract lipids from the cells without cell damage. The term "cell milking" has been around for quite some time, and the hypothesis discussed in the present study can help in this context. The current hypothesized process can pave ways for futuristic endeavors to conjugate nanoparticles and microalgae for viable and commercial production of biofuel, nanoparticles, and many other molecules.

Association of Eu(III) and Cm(III) onto an extremely halophilic archaeon

In addition to geological, geochemical, and geophysical aspects, also, microbial aspects have to be taken into account when considering the final storage of high-level radioactive waste in a deep geological repository. Rock salt is a potential host rock formation for such a repository. One indigenous microorganism, that is, common in rock salt, is the halophilic archaeon Halobacterium noricense DSM15987^T, which was used in our study to investigate its interactions with the trivalent actinide curium and its inactive analogue europium as a function of time and concentration. Time-resolved laser-induced fluorescence spectroscopy was applied to characterize formed species in the micromolar europium concentration range. An extended evaluation of the data with parallel factor analysis revealed the association of Eu(III) to a phosphate compound released by the cells (F₂/F₁ ratio, 2.50) and a solid phosphate species (F₂/F₁ ratio, 1.80). The association with an aqueous phosphate species and a solid phosphate species was proven with site-selective TRLFS. Experiments with Cm(III) in the nanomolar concentration range showed a time- and pC_H+-dependent species distribution. These species were characterized by red-shifted emission maxima, 600-602 nm, in comparison to the free Cm(III) aqueous ion, 593.8 nm. After 24 h, 40% of the luminescence intensity was measured on the cells corresponding to 0.18 μg Cm(III)/g_DBM. Our results demonstrate that Halobacterium noricense DSM15987^T interacts with Eu(III) by the formation of phosphate species, whereas for Cm(III), a complexation with carboxylic functional groups was also observed.

Synthesis and applications of biogenic nanomaterials in drinking and wastewater treatment

The continuous increase in water pollution by various organic & inorganic contaminants has become a major issue of concern worldwide. Furthermore, the anthropogenic activities for the manufacturing of various products have boosted this problem manifold. To overcome this serious issue, nanotechnology has initiated to explore various proficient strategies to treat waste water in a more precise and accurate way with the support of various nanomaterials. In recent times, nanosized materials have proved their applicability to provide clean and affordable water treatment technologies. The exclusive features such as high surface area and mechanical properties, greater chemical reactivity, lower cost and energy, efficient regeneration for reuse allow the nanomaterials perfect for water remediation. But the conventional routes of synthesis of nanomaterials encompass the involvement of hazardous and volatile chemicals; therefore the use of nanomaterials further creates the secondary pollution. This issue has intrigued the scientists to develop biogenic pathways and procedures which are environmentally safer and inexpensive. It has led to the new trends that involve developing bio-inspired nano-scale adsorbents and catalysts for the removal and degradation of a wide range of water pollutants. Carbohydrates, proteins, polymers, flavonoids, alkaloids and several antioxidants obtained from plants, bacteria, fungi, and algae have proven their effectiveness as capping and stabilizing agents during manufacture of nanomaterials. Application of biogenic nanomaterials for waste water treatment is relatively newer but rapidly escalating area of research. In the present review, promises and challenges for the synthesis of various biogenic nanomaterials and their potential applications in waste water treatment and/or water purification have been discussed.

Influence of pH, competing ions, and salinity on the sorption of strontium and cobalt onto biogenic hydroxyapatite

Anthropogenic radionuclides contaminate a range of environments as a result of nuclear activities, for example, leakage from waste storage tanks/ponds (e.g. Hanford, USA or Sellafield sites, UK) or as a result of large scale nuclear accidents (e.g. Chernobyl, Ukraine or Fukushima, Japan). One of the most widely applied remediation techniques for contaminated waters is the use of sorbent materials (e.g. zeolites and apatites). However, a key problem at nuclear contaminated sites is the remediation of radionuclides from complex chemical environments. In this study, biogenic hydroxyapatite (BHAP) produced by Serratia sp. bacteria was investigated for its potential to remediate surrogate radionuclides (Sr²⁺ and Co²⁺) from environmentally relevant waters by varying pH, salinity and the type and concentration of cations present. The sorption capacity of the BHAP for both Sr²⁺ and Co²⁺ was higher than for a synthetically produced hydroxyapatite (HAP) in the solutions tested. BHAP also compared favorably against a natural zeolite (as used in industrial decontamination) for Sr²⁺ and Co²⁺ uptake from saline waters. Results confirm that hydroxyapatite minerals of high surface area and amorphous calcium phosphate content, typical for biogenic sources, are suitable restoration or reactive barrier materials for the remediation of complex contaminated environments or wastewaters.

Radiotolerance of phosphatases of a Serratia sp.: potential for the use of this organism in the biomineralization of wastes containing radionuclides

Aqueous wastes from nuclear fuel reprocessing present special problems of radiotoxicity of the active species. Cells of Serratia sp. were found previously to accumulate high levels of hydrogen uranyl phosphate (HUP) via the activity of a phosphatase enzyme. Uranium is of relatively low radiotoxicity whereas radionuclide fission products such as (90)Sr and (137)Cs are highly radiotoxic. These radionuclides can be co-crystallized, held within the bio-HUP "host" lattice on the bacterial cells and thereby removed from contaminated solution, depending on continued phosphatase activity. Radiostability tests using a commercial (60)Co γ-source showed that while cell viability and activity of purified phosphatase were lost within a few hours on irradiation, whole-cell phosphatase retained 80% of the initial activity, even after loss of cell culturability, which was increased to 100% by the incorporation of mercaptoethanol as an example radioprotectant, beyond an accumulated dose of >1.3 MGy. Using this co-crystallization approach (without mercaptoethanol) (137)Cs(+) and (85)Sr(2+) were removed from a simulated waste selectively against a 33-fold excess of Na(+).

A new incorporation mechanism for trivalent actinides into bioapatite: a TRLFS and EXAFS study

One of the most toxic byproducts of nuclear power and weapons production is the transuranics, which have a high radiotoxicity and long biological half-life due to their tendency to accumulate in the skeletal system. This accumulation is inhomogeneous and has been associated with the chemical properties and structure of the bone material rather than its location or function. This suggests a chemical driving force to incorporation and requires an atomic scale mechanistic understanding of the incorporation process. Here we propose a new incorporation mechanism for trivalent actinides and lanthanides into synthetic and biologically produced hydroxyapatite. Time-resolved laser fluorescence spectroscopy and extended X-ray absorption fine structure have been used to demonstrate that trivalent actinides and lanthanides incorporate into the amorphous grain boundaries of apatite. This incorporation site can be used to explain patterns in uptake and distribution of radionuclides in the mammalian skeletal system.

Uptake of Sr2+ and Co2+ into biogenic hydroxyapatite: implications for biomineral ion exchange synthesis

Biomineral hydroxyapatite (Bio-HAp) produced by Serratia sp. has the potential to be a suitable material for the remediation of metal contaminated waters and as a radionuclide waste storage material. Varying the Bio-HAp manufacturing method was found to influence hydroxyapatite (HAp) properties and consequently the uptake of Sr(2+) and Co(2+). All the Bio-HAp tested in this study were more efficient than the commercially available hydroxyapatite (Com-HAp) for Sr(2+) and Co(2+) uptake. For Bio-HAp the uptake for Sr(2+) and Co(2+) ranged from 24 to 39 and 29 to 78 mmol per 100 g, respectively. Whereas, the uptake of Sr(2+) and Co(2+) by Com-HAp ranged from 3 to 11 and 4 to 18 mmol per 100 g, respectively. Properties that increased metal uptake were smaller crystallite size (<40 nm) and higher surface area (>70 m(2) g(-1)). Organic content which influences the structure (e.g., crystallite arrangement, size and surface area) and composition of Bio-HAp was also found to be important in Sr(2+) and Co(2+) uptake. Overall, Bio-HAp shows promise for the remediation of aqueous metal waste especially since Bio-HAp can be synthesized for optimal metal uptake properties.

Biosynthesis of Calcium Hydroxylapatite Coating on Sputtered Ti/TiN Nano Multilayers and their Corrosion Behavior in Simulated Body Solution

Titanium/titanium nitride (Ti/TiN) nanoscale multilayered films were deposited onto 316L stainless steel substrates by reactive magnetron sputtering using a Ti target. Coatings characterized by X-ray diffraction showed that the stack possesses centered cubic structure. The X-ray photoelectron spectroscopy survey spectra on the etched surfaces of the stack film on steel exhibited the characteristic Ti2p, N1s, and O1s peaks at the corresponding binding energies 454.5, 397.0, and 530.6 eV, respectively. Platelet adhesion experiments were carried out to examine the interaction between blood and the materials in vitro. The results indicated that the smoothness and lower isoelectric point contribute to better hemocompatibility of the Ti/TiN nanoscale multilayered coating. The biomediated synthesis of calcium hydroxylapatite (HA) was carried out on coated substrates using calcium-depositing bacteria. The observation of low corrosion current density ( Icorr) for the calcium HA-coated Ti/TiN specimens in simulated body fluid confirmed their highly resistive nature under the testing condition.

A Study of Biofilm and Non-Line-of-Sight Bio-Hydroxyapatite Coatings Using a Serratia sp

This study describes biofilm formation as a non line-of-sight coating method on support materials such as polyurethane foam, porous glass, polypropylene (PP) and titanium alloy, using a Serratia sp., which can manufacture extracellular nanoscale scaffolded hydroxyapatite (HA) crystals via enzymatic cleavage of glycerol 2-phosphate (G2P) in the presence of CaCl2. Various microscopies and non-invasive magnetic resonance imaging were used to visualize the biofilm coating on the support surface. A novel micromanipulation technique was used to estimate the adhesive strength of native and HA-mineralized biofilms. The biofilm with HA was up to forty times stronger than that without HA. A coating of nano-HA (> 80 m) onto a biofilm-Ti disc was achieved.

Microstructure and composition of biosynthetically synthesised hydroxyapatite

Biosynthetic hydroxyapatite (HA) manufactured utilising the bacterium Serratia sp. NCIMB40259 was characterised using X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), energy dispersive X-ray analysis (EDX) scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron diffraction (ED). SEM/EDX showed that the non-sintered material consisted mainly of calcium-deficient HA (CDHA) with a Ca/P ratio of 1.61 +/- 0.06 and crystal size (from TEM) of 50 +/- 10 nm. ED analysis of non-sintered powder showed resolvable ring patterns ascribed to (0002), (1122) and (0006) planes of crystalline HA. The crystallinity of the samples improved with heat treatment from approximately 9.4% (non-sintered) to 53% (1,200 degrees C). Samples heated at 600 degrees C and sintered at 1,200 degrees C were identified by XRD and FTIR as mainly CDHA with some sodium calcium phosphate in the sintered samples. Ca/P ratios (SEM/EDX) were 1.62 and 1.52, respectively. Single crystal spot patterns characteristic of HA were seen with commercial HA and Serratia HA heated at 600 degrees C. After sintering at 1,200 degrees C the material consisted of needle-like crystals with a length between 86 and 323 nm (from TEM) or 54-111 nm (from XRD) and lattice parameters of a = 9.441 A and c = 6.875 A. This study indicated that the material produced by Serratia bacteria was initially mainly nanophase calcium deficient hydroxyapatite, which sintered to a more highly crystalline form. With further refinements the method could be used as an inexpensive route for hydroxyapatite production for biomaterials applications.

A novel non line-of-sight method for coating hydroxyapatite onto the surfaces of support materials by biomineralization

A novel method is described for the non line-of-sight coating of hydroxyapatite onto polyurethane reticulated foam and titanium discs. This utilises a biofilm of Serratia sp. NCIMB 40259 which, when challenged with a solution containing calcium chloride and phosphatase substrate, manufactures biofilm-bound material identified as hydroxyapatite by X-ray powder diffraction analysis. Non-invasive magnetic resonance imaging was used to visualize the biofilm coating throughout the foam labyrinth and to measure the thickness of the film within reticulated foam cubes in situ. The film developed within the cube matrices was similar to that measured on the surface of a glass slide. Using LaPO(4) deposition as a model system the metallised biofilm was visualised in two-dimensional slices throughout three-dimensional images acquired by magnetic resonance imaging. A similar encrustation of hydroxyapatite on the surface of biofilm grown on titanium discs was confirmed by scanning electron microscopy. Potential applications for bio-hydroxyapatite as possible bone implant precursors are discussed.