Thermal welding of biological tissues derived from porcine aorta for manufacturing bioprosthetic cardiac valves

Temperature Distribution of Vessel Tissue by High Frequency Electric Welding with Combination Optical Measure and Simulation

In clinical surgery, high frequency electric welding is routinely utilized to seal and fuse soft tissues. This procedure denatures collagen by electrothermal coupling, resulting in the formation of new molecular crosslinks. It is critical to understand the temperature distribution and collagen structure changes during welding in order to prevent thermal damage caused by heat generated during welding. In this study, a method combining optical measurement and simulation was presented to evaluate the temperature distribution of vascular tissue during welding, with a fitting degree larger than 97% between simulation findings and measured data. Integrating temperature distribution data, strength test data, and Raman spectrum data, it is discovered that optimal parameters exist in the welding process that may effectively prevent thermal damage while assuring welding strength.

Energy-Based Tissue Fusion for Sutureless Closure: Applications, Mechanisms, and Potential for Functional Recovery

As minimally invasive surgical techniques progress, the demand for efficient, reliable methods for vascular ligation and tissue closure becomes pronounced. The surgical advantages of energy-based vessel sealing exceed those of traditional, compression-based ligatures in procedures sensitive to duration, foreign bodies, and recovery time alike. Although the use of energy-based devices to seal or transect vasculature and connective tissue bundles is widespread, the breadth of heating strategies and energy dosimetry used across devices underscores an uncertainty as to the molecular nature of the sealing mechanism and induced tissue effect. Furthermore, energy-based techniques exhibit promise for the closure and functional repair of soft and connective tissues in the nervous, enteral, and dermal tissue domains. A constitutive theory of molecular bonding forces that arise in response to supraphysiological temperatures is required in order to optimize and progress the use of energy-based tissue fusion. While rapid tissue bonding has been suggested to arise from dehydration, dipole interactions, molecular cross-links, or the coagulation of cellular proteins, long-term functional tissue repair across fusion boundaries requires that the reaction to thermal damage be tailored to catalyze the onset of biological healing and remodeling. In this review, we compile and contrast findings from published thermal fusion research in an effort to encourage a molecular approach to characterization of the prevalent and promising energy-based tissue bond.

Ectopic mineralization in heart valves: new insights from in vivo and in vitro procalcific models and promising perspectives on noncalcifiable bioengineered valves

Ectopic calcification of native and bioprosthetic heart valves represents a major public health problem causing severe morbidity and mortality worldwide. Valve procalcific degeneration is known to be caused mainly by calcium salt precipitation onto membranes of suffering non-scavenged cells and dead-cell-derived products acting as major hydroxyapatite nucleators. Although etiopathogenesis of calcification in native valves is still far from being exhaustively elucidated, it is well known that bioprosthesis mineralization may be primed by glutaraldehyde-mediated toxicity for xenografts, cryopreservation-related damage for allografts and graft immune rejection for both. Instead, mechanical valves, which are free from calcification, are extremely thrombogenic, requiring chronic anticoagulation therapies for transplanted patients. Since surgical substitution of failed valves is still the leading therapeutic option, progressive improvements in tissue engineering techniques are crucial to attain readily available valve implants with good biocompatibility, proper functionality and long-term durability in order to meet the considerable clinical demand for valve substitutes. Bioengineered valves obtained from acellular non-valvular scaffolds or decellularized native valves are proving to be a compelling alternative to mechanical and bioprosthetic valve implants, as they appear to permit repopulation by the host's own cells with associated tissue remodelling, growth and repair, besides showing less propensity to calcification and adequate hemodynamic performances. In this review, insights into valve calcification onset as revealed by in vivo and in vitro procalcific models are updated as well as advances in the field of valve bioengineering.

Investigations of Human Fascia Lata Elemental Composition-the Effect of Different Preservation and Mineralisation Methods

Influence of fixation medium and storage conditions as well as impact of sample mineralisation procedure on determination of minerals in human fascia lata was examined and discussed. Freezing and storage in 10% neutral buffered formalin solution and in 2.5% glutaraldehyde were used as the preservation methods of the samples. The concentrations of, both essential and toxic, elements were measured by ICP-OES method in fascia lata samples mineralised with concentrated nitric acid in a closed microwave system and in open vessels heated on a hot plate. Freezing was found as the best preserving method of fascia lata samples because of the number of elements determined and determination precision. The trace element (Cd, Cr, Cu, Fe, Ni, Sr, Zn) concentrations obtained in samples decomposed using the conventional hot plate were different from analogous measurements in solutions obtained after application of closed vessels and microwave energy assistance. Differences between the mineral compositions of fascia samples variously preserved and mineralised were statistically evaluated and discussed. Interelement correlations were analysed taking into account an impact of various methods of sample conservation. Strong, positive association between element content was discovered for Cr-Ba, Mn-Ba, P-Ba, Sr-Ba, Sr-Ca, Zn-Ca, Mn-Cr, Pb-Cr, Sr-Cr, Mg-Fe, P-Fe, Pb-Ni, Ti-Ni and Sr-P pairs of elements.

Strength and Persistence of Energy-Based Vessel Seals Rely on Tissue Water and Glycosaminoglycan Content

Vessel ligation using energy-based surgical devices is steadily replacing conventional closure methods during minimally invasive and open procedures. In exploring the molecular nature of thermally-induced tissue bonds, novel applications for surgical resection and repair may be revealed. This work presents an analysis of the influence of unbound water and hydrophilic glycosaminoglycans on the formation and resilience of vascular seals via: (a) changes in pre-fusion tissue hydration, (b) the enzymatic digestion of glycosaminoglycans (GAGs) prior to fusion and (c) the rehydration of vascular seals following fusion. An 11% increase in pre-fusion unbound water led to an 84% rise in vascular seal strength. The digestion of GAGs prior to fusion led to increases of up to 82% in seal strength, while the rehydration of native and GAG-digested vascular seals decreased strengths by 41 and 44%, respectively. The effects of increased unbound water content prior to fusion combined with the effects of seal rehydration after fusion suggest that the heat-induced displacement of tissue water is a major contributor to tissue adhesion during energy-based vessel sealing. The effects of pre-fusion GAG-digestion on seal integrity indicate that GAGs are inhibitory to the bond formation process during thermal ligation. GAG digestion may allow for increased water transport and protein interaction during the fusion process, leading to the formation of stronger bonds. These findings provide insight into the physiochemical nature of the fusion bond, its potential for optimization in vascular closure and its application to novel strategies for vascular resection and repair.

Bond Strength of Thermally Fused Vascular Tissue Varies With Apposition Force

Surgical tissue fusion devices ligate blood vessels using thermal energy and coaptation pressure, while the molecular mechanisms underlying tissue fusion remain unclear. This study characterizes the influence of apposition force during fusion on bond strength, tissue temperature, and seal morphology. Porcine splenic arteries were thermally fused at varying apposition forces (10-500 N). Maximum bond strengths were attained at 40 N of apposition force. Bonds formed between 10 and 50 N contained laminated medial layers; those formed above 50 N contained only adventitia. These findings suggest that commercial fusion devices operate at greater than optimal apposition forces, and that constituents of the tunica media may alter the adhesive mechanics of the fusion mechanism.