Desorption of heavy metals from metal loaded sorbents and e-wastes: A review

Semi-continuous cultivation of EPS-producing marine cyanobacteria: A green biotechnology to remove dissolved metals obtaining metal-organic materials

Given the necessity for bioprocesses scaling-up, the present study aims to explore the potential of three marine cyanobacteria and a consortium, cultivated in semi-continuous mode, as a green approach for i) continuous exopolysaccharide-rich biomass production and ii) removal of positively charged metals (Cu, Ni, Zn) from mono and multi-metallic solutions. To ensure the effectiveness of both cellular and released exopolysaccharides, weekly harvested whole cultures were confined in dialysis tubings. The results revealed that all the tested cyanobacteria have a stronger affinity towards Cu in mono and three-metal systems. Despite the amount of metals removed per gram of biomass decreased with higher biosorbent dosage, the more soluble carbohydrates were produced, the greater was the metal uptake, underscoring the pivotal role of released exopolysaccharides in metal biosorption. According to this, Dactylococcopsis salina 16Som2 showed the highest carbohydrate productivity (142 mg L-1 d-1) and metal uptake (84 mg Cu g-1 biomass) representing a promising candidate for further studies. The semi-continuous cultivation of marine cyanobacteria here reported assures a schedulable production of exopolysaccharide-rich biosorbents with high metal removal and recovery potential, even from multi-metallic solutions, as a step forward in the industrial application of cyanobacteria.

Adsorption and desorption processes of toxic heavy metals, regeneration and reusability of spent adsorbents: Economic and environmental sustainability approach

A growing number of variables, including rising population, water scarcity, growth in the economy, and the existence of harmful heavy metals in the water supply, are contributing to the increased demand for wastewater treatment on a global scale. One of the innovative water treatment technologies is the adsorptive removal of heavy metals through the application of natural and engineered adsorbents. However, adsorption currently has setbacks that prevent its wider application for heavy metals sequestration from aquatic environments using various adsorbents, including difficulty in selecting suitable desorption eluent to recover adsorbed heavy metals and regeneration techniques to recycle the spent adsorbents for further use and safe disposal. Therefore, the recovery of adsorbed heavy metal ions and the ability to reuse the spent adsorbents is one of the economic and environmental sustainability approaches. This study presents a state-of-the-art critical review of different desorption agents that could be used to retrieve heavy metals and regenerate the spent adsorbents for further adsorption-desorption processes. Additionally, an attempt was made to discuss and summarize some of the independent factors influencing heavy metals desorption, recovery, and adsorbent regeneration. Furthermore, isotherm and kinetic modeling have been summarized to provide insights into the adsorption-desorption mechanisms of heavy metals. Finally, the review provided future perspectives to provide room for researchers and industry players who are interested in heavy metals desorption, recovery, and spent adsorbents recycling to reduce the high cost of adsorbents reproduction, minimize secondary waste generation, and thereby provide substantial economic and environmental benefits.

Highly efficient hydrophobic nanocomposite in the decontamination of micropollutants and bacteria from aqueous wastes: A sustainable approach

Micro-pollutants (specifically antibiotics and personal care products) and potential bacterial contamination pose a severe threat to human health and marine life. The study derives indigenous novel fibrous hydrophobic nanocomposite, efficient in decontaminating the micro-pollutants (tetracycline (TC) and bisphenol A (BPA)) and potential pathogens (S. pyogenes and E. coli) from aqueous wastes. A facile method synthesizes the fibrous attapulgite (ATP)- poly(4-vinylpyridine-co-styrene) (PVP) framework decorated in situ with the Ag0 nanoparticles (ATP@PVP/Ag0). A greener method using the Artocarpus heterophyllus leaf extract derives the Ag0(NPs). Various analytical methods extensively characterize the materials. A comprehensive study that includes pH, concentration, background electrolytes, and ionic strength reveals the sorptive removal insights of TC and BPA utilizing the ATP@PVP solid. The elimination of tetracycline (TC) and bisphenol A (BPA) agrees well with the pseudo-second-order kinetics. The pH 3.07 and 6.06 favor removing TC and BPA with the capacity of 10.86 mg/g and 17.36 mg/g at 25 °C. The hydrogen bonding and hydrophobic interactions predominate the sorption mechanism, and the material shows remarkable stability and reusability in repeated sorption/desorption operations. Similarly, the natural water implications and flow-bed system show fair applicability of solid in decontaminating the TC and BPA in an aqueous medium. Further, the material ATP@PVP/Ag0 exhibits very high inhibition of potential pathogens S. pyogenes and E. coli and optimizes the solid dose and solution pH.

Novel fibrous Ag(NP) decorated clay-polymer composite: Implications in water purification contaminated with predominant micro-pollutants and bacteria

Due to the potential harm caused by emerging micro-pollutants to living organisms, contaminating water supplies by micro-pollutants like EDCs, pharmaceuticals, and microorganisms has become a concern in many countries. Considering both microbiological and micro-pollutant exposure risks associated with water use for agricultural/or household purposes, it is imperative to create a strategy for improving pollutant removal from treated wastewater that is both effective and affordable. Natural clay minerals efficiently remove contaminants from wastewater, though the pristine clay has less affinity to several organic pollutants. Hydrophilic polymers, viz., poly(ethylene glycol) (PEG), improve the dispersion of particles, flocculation processes, and surface properties. In this study, PEG grafted with attapulgite, thereby providing a high-specific surface-area, mesoporous materials for the adsorption of micro-pollutants like ciprofloxacin (CIP) and 17α-ethinylestradiol (EE2) at high rates. A gentle washing process regenerates the clay-polymer material several times with no performance loss, and the natural water implications show fair applicability of solid in decontaminating the CIP and EE2 in an aqueous medium. Further, greenly synthesized silver nanoparticles in situ disperse with the clay polymer efficiently remove the gram-positive and gram-negative bacterium viz., Bacillus subtilis, and Pseudomonas aeruginosa, which are commonly persistent in aquatic environments. The clay polymer outperformed a modified clay composite to eliminate microorganisms and organic micro-pollutants in significant quantities quickly. These results clearly show the importance of fibrous clay-polymer composite for water purification technologies.

The Design of a Process for Adsorbing and Eluting Chromium (VI) Using Fixed-Bed Columns of E. crassipes with Sodium Tripolyphosphate (TPP)

Proper water resource management is a critical global objective, both privately and in business, due to the continuous deterioration of this valuable resource. Scientific research in environmental sciences has made significant progress in the development and achievements of treatment. The use of transformed E. crassipes biomass with sodium tripolyphosphate (TPP) can help to achieve this important goal. The objective of this study was to develop an experimental process for the continuous adsorption and elution of chromium (VI) using fixed-bed columns of E. crassipes biomass modified with sodium tripolyphosphate (TPP). Additionally, design tools were created, and economic viability was assessed by analyzing adsorption capacity indicators and unit production costs of different biomasses. Treatment systems were designed and constructed to remove chromium from tannery wastewater, ensuring that the levels were below the current environmental regulations of 0.05 mg/L Cr(VI). The biomass had an adsorption capacity of 98 mg/g and was produced at a low cost of 8.5 dollars. This resulted in an indicator of 11.5 g Cr(VI)/(USD) when combined with the elution processes. The proposed strategy, which utilizes entirely green technologies, enables the recovery and valorization of water resources. This makes it an effective tool for the circular economy.

Cyclic zinc capture and zeolite regeneration using a column method, mass transfer analysis of multi regenerated bed

Treatment of wastewater and reuse of purified water in an industrial process can provide an alternative source of fresh water as well as reduce pollution load by discharging a lower quantity of wastewater. When adsorption is used for treatment, the regeneration of the used adsorbent may also account for a large portion of the operational cost and cause secondary pollution. This problem may be solved by cyclic repetition of adsorption/regeneration cycles using a column method. In this paper, a total of nine successive cycles of zinc capture and zeolite bed regeneration using a column method have been investigated. The derived form of the breakthrough curve was used for analysing mass transfer in the column. For that purpose, the Dose-response, the Thomas, the Bohart-Adams, the Yoon-Nelson and the Wolborska models were used for modelling the breakthrough curve by nonlinear regression analysis. Simulation results and mathematical similarities between the models were discussed. This is the first study that used derived form of Dose-response model to analyse the inflection points of the breakthrough curve and mass transfer during nine consecutive sorption-regeneration cycles of zinc ions on natural zeolite. Obtained peak shape rate profiles were analysed for all cycles. Optimal operation conditions were evaluated with respect to the inflection point, the model parameters, and the residence time.

Recent Advances in the Treatment of Industrial Wastewater from Different Celluloses in Continuous Systems

There are numerous studies on water care methods featured in various academic and research journals around the world. One research area is cellulose residue coupled with continuous systems to identify which are more efficient and easier to install. Investigations have included mathematical design models that provide methods for developing and commissioning industrial wastewater treatment plants, but nothing is provided on how to size and start these treatment systems. Therefore, the objective is to determine recent advances in the treatment of industrial wastewater from different celluloses in continuous systems. The dynamic behavior of the research results with cellulose biomasses was analyzed with the mass balance model and extra-particle and intraparticle dispersion, evaluating adsorption capacities, design variables, and removal constants, and making a size contribution for each cellulose analyzed using adsorption capacities. A mathematical model was also developed that feeds on cellulose reuse, determining new adsorption capacities and concluding that the implementation of cellulose waste treatment systems has a high feasibility due to low costs and high adsorption capacities. Furthermore, with the design equations, the companies themselves could design their systems for the treatment of water contaminated with heavy metals with cellulose.

Nano/micro-cellulose-based materials as remarkable sorbents for the remediation of agricultural resources from chemical pollutants

Overusing pesticides, fertilizers, and synthetic dyes has significantly increased their presence in various parts of the environment. The transportation of these pollutants into agricultural soil and water through rivers, soils, and groundwater has seriously threatened human and ecosystem health. Applying techniques and materials to clean up agricultural sources from pesticides, heavy metals (HMs), and synthetic dyes (SDs) is one of the major challenges in this century. The sorption technique offers a viable solution to remediate these chemical pollutants (CHPs). Cellulose-based materials have become popular in nano and micro scales because they are widely available, safe to use, biodegradable, and have a significant ability to absorb substances. Nanoscale cellulose-based materials exhibit greater capacity in absorbing pollutants compared to their microscale counterparts because they possess a larger surface area. Many available hydroxyl groups (-OH) and chemical and physical modifications enable the incorporation of CHPs on to cellulose-based materials. Following this potential, this review aims to comprehensively summarize recent advancements in the field of nano- and micro-cellulose-based materials as effective adsorbents for CHPs, given the abundance of cellulosic waste materials from agricultural residues. The recent developments pertaining to the enhancement of the sorption capacity of cellulose-based materials against pesticides, HMs, and SDs, are deliberated.

Cyanoremediation and phyconanotechnology: cyanobacteria for metal biosorption toward a circular economy

Cyanobacteria are widespread phototrophic microorganisms that represent a promising biotechnological tool to satisfy current sustainability and circularity requirements. They are potential bio-factories of a wide range of compounds that can be exploited in several fields including bioremediation and nanotechnology sectors. This article aims to illustrate the most recent trends in the use of cyanobacteria for the bioremoval (i.e., cyanoremediation) of heavy metals and metal recovery and reuse. Heavy metal biosorption by cyanobacteria can be combined with the consecutive valorization of the obtained metal-organic materials to get added-value compounds, including metal nanoparticles, opening the field of phyconanotechnology. It is thus possible that the use of combined approaches could increase the environmental and economic feasibility of cyanobacteria-based processes, promoting the transition toward a circular economy.

Adsorption of Copper and Arsenic from Water Using a Semi-Interpenetrating Polymer Network Based on Alginate and Chitosan

New biobased hydrogels were prepared via a semi-interpenetrating polymer network (semi-IPN) using polyacrylamide/chitosan (PAAM/chitosan) hydrogel for the adsorption of As(V) or poly acrylic acid/alginate (PAA/alginate) hydrogel for the adsorption of Cu(II). Both systems were crosslinked using N,N'-methylenebisacrylamide as the crosslinker and ammonium persulfate as the initiating agent. The hydrogels were characterized by SEM, Z-potential, and FTIR. Their performance was studied under different variables, such as the biopolymer effect, adsorbent dose, pH, contact time, and concentration of metal ions. The characterization of hydrogels revealed the morphology of the material, with and without biopolymers. In both cases, the added biopolymer provided porosity and cavities' formation, which improved the removal capacity. The Z-potential informed the surface charge of hydrogels, and the addition of biopolymers modified it, which explains the further metal removal ability. The FTIR spectra showed the functional groups of the hydrogels, confirming its chemical structure. In addition, the adsorption results showed that PAAM/chitosan can efficiently remove arsenic, reaching a capacity of 17.8 mg/g at pH 5.0, and it can also be regenerated by HNO₃ for six cycles. On the other hand, copper-ion absorption was studied on PAA/alginate, which can remove with an adsorption capacity of 63.59 mg/g at pH 4.0, and the results indicate that it can also be regenerated by HNO₃ for five cycles.

Desorption of zinc, copper and lead ions from loaded flax fibres

Biosorption is an efficient and cost-effective method for heavy metals' remediation. However, saturated biosorbents may pose a serious problem for the environment. Flax fibres have shown very good adsorption capacities to remove zinc, copper and lead ions from contaminated aqueous solutions. In this study, adsorption-desorption cycles were conducted with loaded flax fibres in batch mode to recover heavy metals using four types of solutions: hydrochloric acid solution, nitric acid solution, sodium hydroxide solution and ultrapure water. Desorption kinetic studies, conducted with loaded flax fibres, showed very fast desorption of zinc, copper and lead when using nitric and hydrochloric acids with a selectivity sequence of Zn (totally desorbed) > Cu (94%) > Pb (80-73%). Desorption kinetic was slower with the use of sodium hydroxide and showed much lower desorption rates of Zn (62%) > Pb (12%) > Cu (7%). Desorption of zinc and copper from previously loaded fibres from binary metal ion system in lead solution was also investigated. Different concentrations ranging from 0.04 to 0.20 mmol/L were tested. The obtained results demonstrated a significant release in the order Zn (18-90%) > Cu (2-42%), while lead was still efficiently adsorbed. Retention efficiencies of zinc and copper and adsorption efficiency of lead resulted in the same adsorption efficiencies of the three metal ions onto flax fibres in the ternary metal ion system.

Yeast—As Bioremediator of Silver-Containing Synthetic Effluents

Yeast Saccharomyces cerevisiae may be regarded as a cost-effective and environmentally friendly biosorbent for complex effluent treatment. The effect of pH, contact time, temperature, and silver concentration on metal removal from silver-containing synthetic effluents using Saccharomyces cerevisiae was examined. The biosorbent before and after biosorption process was analysed using Fourier-transform infrared spectroscopy, scanning electron microscopy, and neutron activation analysis. Maximum removal of silver ions, which constituted 94–99%, was attained at the pH 3.0, contact time 60 min, and temperature 20 °C. High removal of copper, zinc, and nickel ions (63–100%) was obtained at pH 3.0–6.0. The equilibrium results were described using Langmuir and Freundlich isotherm, while pseudo-first-order and pseudo-second-order models were applied to explain the kinetics of the biosorption. The Langmuir isotherm model and the pseudo-second-order model fitted better experimental data with maximum adsorption capacity in the range of 43.6–108 mg/g. The negative Gibbs energy values pointed at the feasibility and spontaneous character of the biosorption process. The possible mechanisms of metal ions removal were discussed. Saccharomyces cerevisiae have all necessary characteristics to be applied to the development of the technology of silver-containing effluents treatment.

Fir sawdust as a low-cost and easily recyclable adsorbent: efficient removal of Pb(II), Cu(II), and Zn(II) contaminants from wastewater

The main pollution sources of heavy metals are the arbitrary discharge of industrial wastewater and waste residues, which cause serious harm to the water environment, soil environment, and human health. In this study, following the principle of waste utilization, a gel adsorbent (AA-SW-AMPS) was prepared by microwave-assisted chemical cross-linking using fir sawdust as raw material. A scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and swelling dynamic experiments were used to investigate the microstructure, reaction mechanism, and water absorption performance of AA-SW-AMPS. The N₂ adsorption-desorption curve shows that the porous structure of AA-SW-AMPS creates 240.75 cm²/g of specific surface area to enable excellent heavy-metal sorption. It was determined by adsorption experiments that the optimal adsorption state was when the dosage of AA-SW-AMPS was 5 g/L, the pH of the solution was 5, the adsorption time was 45 min, and the initial heavy metal ion concentration was 250 mg/L. In addition, the adsorption mechanism was investigated using adsorption dynamics, adsorption isotherm, and Materials Studio simulation. The results show that the maximum adsorption capacities of AA-SW-AMPS for Pb(II), Cu(II), and Zn(II) were 253.49 mg/g, 237.29 mg/g, and 232.15 mg/g, respectively, and the adsorption mechanism is monolayer chemisorption. The adsorbent showed great potential in removing heavy metals from wastewater.

Fungal biotechnology for urban mining of metals from waste printed circuit boards: A review

Rapid surge in electronic waste (e-waste) and its unscientific handling has an adverse impact on humans and the environment. Waste printed circuit board (WPCB), an integrated component of e-waste, has a high metallic content that includes both toxic and precious metals. Therefore, metal recovery is essential not just to avoid environmental degradation but also for economic growth. The current literature analysis focuses on one such eco-friendly approach, known as fungal biotechnology, for extracting metals from WPCBs. Among diverse bioleaching agents, fungi have shown promising metal extraction efficiency (Al: 65-96%; Co: 45-90%; Cu: 34-100%; Ni: 8-95%; Mn: 70-95%; Pb: 27-95%; Zn: 54-99%) and the ability to work in a wide pH range. However, in terms of metal recovery from WPCBs, fungal bioleaching has been less explored. This review, thus, assesses the fungal biotechnology for metal extraction from WPCBs and discusses the associated mechanism and kinetics involved. Different process parameters affecting the fungal bioleaching have also been discussed briefly. The review highlights that, while this process has enough potential, some associated drawbacks hinder its practical applicability on an industrial scale. Lastly, some suggestions for scaling up and reducing the cost of the process have been made, which need to be addressed.

Immobilization of exopolymeric substances from bacteria for metal removal: A study on characterization, optimization, reusability and toxicity

This study investigated the immobilization of exopolymeric substances (EPS) from Bacillus cereus using sodium alginate to form EPS beads for metal removal. The EPS beads were characterized and their optimum biosorption conditions established (biosorbent dosage, initial metal concentration and pH of metal solutions). The EPS beads were also tested for reusability by using them continuously for five metal removal cycles with desorption process in between cycles. The toxicity of the treated metal solutions was tested by phytotoxicity tests. Results revealed that EPS beads demonstrated significantly higher metal removal efficiency (Pb: 99.26%, Cr: 50.73%, Cu: 48.94%, Zn: 29.81%, Cd: 20.29%) compared to plain alginate beads (without EPS) (Pb: 84.45%, Cu: 31%, Cr: 28.37%, Zn: 11.91%, Cd: 9.37%). SEM-EDX analysis detected Cu, Pb, Zn, Cd and Cr on the surface of EPS beads. Optimum conditions for Pb removal by EPS beads were from the use of 0.1 g of biosorbent at 100 mg/L initial metal concentration and pH 5. By contrast, Cu, Zn, Cd and Cr were optimally removed by 0.3 g of biosorbent at 25 mg/L initial metal concentration and pH 5. EPS beads can be reused up to five times while maintaining a high rate of metal removal efficiency (Pb- 99.52%, Cr- 89.23%, Cu- 89.17%, Zn-52.52%, Cd-39.12%). This was achieved through desorption with nitric acid that consistently recovered 76-93% of the metal adsorbed. FTIR analysis reveals that nitric acid is capable of restoring the functional groups present within EPS beads, allowing it to bind with metal ions in repeated cycles. Metal solutions treated with EPS beads were less toxic as seedling shoots (pre-treated: 0-10 cm, post-treated: 1.2-18.1 cm) and roots (pre-treated: 0-7.8 cm, post-treated: 0.8-15.1 cm) grew well, which suggested that reduced levels of metals led to reduced phytotoxicity. This study provides an insight into the use of EPS beads for metal removal, highlighting the benefits and reusability of the beads for future wastewater treatment.

Remediation techniques for elimination of heavy metal pollutants from soil: A review

Contaminated soil containing toxic metals and metalloids is found everywhere globally. As a consequence of adsorption and precipitation reactions, metals are comparatively immobile in subsurface systems. Hence remediation techniques in such contaminated sites have targeted the solid phase sources of metals such as sludges, debris, contaminated soils, or wastes. Over the last three decades, the accumulation of these toxic substances inside the soil has increased dramatically, putting the ecosystem and human health at risk. Pollution of heavy metal have posed severe impacts on human, and it affects the environment in different ways, resulting in industrial anger in many countries. Various procedures, including chemical, biological, physical, and integrated approaches, have been adopted to get rid of this type of pollution. Expenditure, timekeeping, planning challenges, and state-of-the-art gadget involvement are some drawbacks that need to be properly handled. Recently in situ metal immobilization, plant restoration, and biological methods have changed the dynamics and are considered the best solution for removing metals from soil. This review paper critically evaluates and analyzes the numerous approaches for preparing heavy metal-free soil by adopting different soil remediation methods.

Design of a Fixed-Bed Column with Vegetal Biomass and Its Recycling for Cr (VI) Treatment

The aim of this work is to design a fixed-bed column with vegetal biomass of Eichhornia crassipes and the process of recycling it for treatment via the adsorption of water loaded with chromium (VI). In the first stage, the relationship between the fixed-bed density and the microparticle density is calculated, giving a model for the design of the fixed bed. Using this model, two systems for the treatment of Cr (VI)-contaminated water were designed and built. The vegetable biomass at three particle diameters of 0.212 mm, 0.30 mm and 0.45 mm was evaluated in the removal of Cr (VI) from water using the designed fixed-bed systems, giving the best removal of Cr (VI) with the lowest size particles and allowing the validation of the proposed model with the Thomas model. The incorporation of iron into the biomass allowed for the treatment of near 2.0 L of polluted solution, removing around 90% of Cr (VI), while it was only possible to treat nearly 1.5 L when using raw biomass, removing around 80% of Cr (VI). The recycling of the biomass was achieved via the elution of Cr (VI) with EDTA, permitting the reuse of the material for more than five treatment cycles.

Cement-Based Solidification/Stabilization as a Pathway for Encapsulating Palm Oil Residual Biomass Post Heavy Metal Adsorption

Heavy metal pollution is a serious issue currently affecting the environment and public health, which has been faced by applying several alternatives such as adsorption. In this work, the adsorption technique was employed to remove nickel and lead ions from an aqueous solution using palm oil residual biomass as a biosorbent. Desorption experiments were also conducted to evaluate the desorption capacity of this biomass over sorption–desorption cycles. The polluted biomass was used to prepare bricks (5 and 10% biomass content) to encapsulate heavy metal ions into the cement matrix. Both mechanical resistance and leaching testing were performed to determine the suitability of these bricks for construction applications. The experimental results revealed a good biosorbent dosage of 0.1 g/L. The highest desorption yields were calculated in 11 and 83.13% for nickel and lead, respectively. The compression resistance when 10% biomass was incorporated into the bricks was reported to be below the acceptable limit. Leaching testing suggested a successful immobilization of heavy metal ions onto the cement matrix. These results indicate that the application of this immobilization technique allows solving disposal problems of biomass loaded with heavy metal ions.

Grafting of the 2,8-dithia-5-aza-2,6-pyridinophane macrocycle on SBA-15 mesoporous silica for the removal of Cu2+ and Cd2+ ions from aqueous solutions: synthesis, adsorption, and complex stability studies

Silica-based mesoporous materials have received growing attention in metal recovery from industrial processes, although, in general, the adsorption of metal ions by silanols is rather poor. Nevertheless, a great improvement of metal ion removal from aqueous solutions can be achieved by grafting metal-chelators on the particles' surface. Combining the metal-chelating properties of organic ligands with the high surface area of mesoporous silica particles makes these hybrid nanostructured materials a new horizon in metal recovery, sensing and controlled storage of metal ions in industrial and mining processes. Here, the 2,8-dithia-5-aza-2,6-pyridinophane (L) macrocycle was grafted on SBA-15 mesoporous silica to obtain the SBA-L mesoporous adsorbent for the removal and controlled recovery of Cd²⁺ and Cu²⁺ ions from aqueous solution in a broad pH range (4-11). By grafting about 0.3 mmol g^-1 of L on SBA-15 a maximum loading capacity of 20.9 mg g^-1 and 31.8 mg g^-1 was obtained for Cu²⁺ and Cd²⁺, respectively. The adsorption kinetics can be described with the pseudo-second order model, while the adsorption isotherm (298 K) followed the Langmuir model. The latter, together with potentiometric studies, suggests that the adsorption mechanism is based on metal chelation by the grafted macrocycle. In summary, SBA-L is an effective copper(II) and cadmium(II) chelator for possible applications where metal removal, storage and recovery are of basic importance.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Competitive sorption of Cd, Cr, Cu, Ni, Pb and Zn from stormwater runoff by five low-cost sorbents; Effects of co-contaminants, humic acid, salinity and pH

For a comprehensive estimation of metals removal by sorbents in stormwater systems, it is essential to evaluate the impacts of co-contaminants. However, most studies consider only metals (single or multiple), which may overestimate performance. This study employed a batch method to investigate the performance of five low-cost sorbents - coconut coir fiber (CCF), blast furnace slag (BFS), waste tire crumb rubber (WTCR), biochar (BC), and iron coated biochar (FeBC) - for simultaneous removal of Cd, Cr, Cu, Ni, Pb and Zn from simulated stormwater (SSW) containing other contaminants (nutrients and polycyclic aromatic hydrocarbons). BFS and CCF demonstrated the highest sorption capacity of all metals (> 95% removal) in all systems (single and multi-contaminant). However, the presence of other contaminants in solution reduced metals removal for other sorbents, as follows (highest to lowest removal): single-metal > multi-metal > multi-contaminant solutions, and removal efficiency ranking among metals was generally Cr~Cu~Pb > Ni > Cd > Zn. Humic acid (HA) negatively affected the metal sorption, likely due to the formation of soluble HA-metal complexes; NaCl concentration did not impact removal, but alkaline pH improved removal. These findings indicate that sorbents need to be tested under realistic stormwater solution chemistry including co-contaminants to appropriately characterize performance prior to implementation.

Advances in application of cotton-based adsorbents for heavy metals trapping, surface modifications and future perspectives

Cotton-based adsorbents (CBAs) are promising materials for combating the problem of heavy metal pollution of environmental waters. This is ascribed to the low cost, abundance, biodegradability and efficiency of CBAs. Herein we review the adsorption of heavy metals (HMs) onto CBAs. We found that several surface modifications were employed to improve the efficiency of the CBAs. These modifications were effected via thermal, physical and chemical means to obtain activated carbons, biochars, ionic liquids, aerogels, hydrogels, chitosans and nanoparticle-derived CBAs. The CBAs exhibited maximum HMs uptake as low as 0.002 mg/g to as high as 505.6 mg/g. Although, the cotton-derived activated carbons and biochars exhibited enhanced HM uptake from that of the unmodified CBAs, they were less efficient than CBAs modified by other methods. Recent chemical, ionic liquid, chitosan and nano-derived CBAs were the most efficient, with high uptake and fast kinetic removal. However, the nanoparticle-based adsorbents are preferred to the chemically modified forms, due to the possibility of secondary pollution and the noxious effect of the latter to the environment. Findings showed that chemical treatment produced CBAs most efficient for As(V), Pb(II) and Fe(III), while ionic liquid CBA was more efficient for Cu(II) and Ni(II). Nano-based treatment was suitable for the uptake of Co(II), Zn(II), Pb(II) and Cd(II), while the chitosan based adsorbent was viable for Hg(II). Isotherm and kinetic evaluation of CBAs mostly conformed to the Langmuir and pseudo-second order models, respectively. Spontaneous adsorption of HMs onto CBAs was deduced from thermodynamic analysis, with endothermic and exothermic characteristics. Over 88% desorption of HMs was obtained from the CBAs studied with good average reusability from 3 to 20 cycles. We also discussed the directions for future research.

Kinetics of Aqueous Cu(II) Biosorption onto Thevetia peruviana Leaf Powder

Copper is an essential micronutrient; however, as a result of its increasing demand, subsequent mining followed by its direct discharge into the environment has led to the contamination of our ecosystem. Thevetia peruviana (TP) is an ornamental herb of medicinal interest and is extensively used as an antipyretic and anticancer agent due to the presence of cardiac glycosides. In this work, we have explored the TP leaf powder as a biosorbent for Cu(II) removal from aqueous media and observed that it yields better results in comparison to other reported biosorbents for the removal of Cu(II). This work also emphasizes on the biosorption kinetics along with its plausible mechanism of interactions. The leaf powder characterized by FT-IR spectroscopy confirmed the diverse surface functionalities including hydroxyl, carbonyl, glycosides, etc. The morphology and elemental composition of the plant material have been investigated using SEM-EDAX analysis that confirms the heterogeneity and porosity of the biosorbent surface. The encouraging results revealed that the TP leaf powder could be used as a cost-effective biosorbent with an adsorption capacity of 187.51 mg g^-1 for Cu(II) in aqueous media at pH ∼ 5 and a temperature of 303 K. The complex functionality of the TP surface most likely played a significant role in attaining fast equilibrium within 60 min by following pseudo-second-order kinetics, having a rate constant of 2 × 10³ mg g^-1 min^-1 that has been confirmed with statistical tools such as regression coefficient, chi-squared, and sum of error square tests. The adsorption mechanism is controlled by diffusion of Cu(II) from the liquid phase to the solid phase of the TP biosorbent followed by the chemical interaction between the biosorbent and the adsorbate with slow intraparticle diffusion on the biosorbent surface. The adsorption of Cu(II) on TP has been observed to rise from 59.29 to 197.63 mg g^-1 with the rise in the pH of the medium from 2 to 7. The adsorption of Cu(II) has been found to increase from 176.80 to 191.33 mg g^-1 with increasing temperature from 293-308 K, confirming the endothermic nature of the adsorption process. The thermodynamic study revealed the adsorption process to be spontaneous with negative ΔG (-10.43 to -13.74 kJ mol^-1) and that it has an endothermic nature with positive ΔH (54.24 kJ mol^-1). The isotherm study for Cu(II) on TP followed the Langmuir adsorption isotherm model with the maximum monolayer adsorption capacity of 303.03 mg g^-1 rather than Freundlich and Temkin isotherm models, which confirmed the chemical interaction between the sorbent and sorbate. FT-IR and SEM-EDAX analyses have also been used to confirm the adsorption of Cu(II) onto the TP surface. The present study revealed 99.7% Cu(II) desorption using 0.8 N HCl as the desorbent accompanied by a 69.71% regeneration efficiency of the TP biosorbent. After desorption of Cu(II), the regenerated TP could be disposed of in soil. The encouraging results revealed that TP could be used as an alternative and low-cost biosorbent for the removal of heavy metals from aqueous solutions.

pH dependence of the non-cooperative binding of Bi3+ to human apo-metallothionein 1A: kinetics, speciation, and stoichiometry

ESI-MS along with cysteine modification show that the binding of Bi³⁺ to apo-metallothionein is non-cooperative with a coordination of BiS(cys)₃ up to Bi₆MT. Stopped flow kinetics reveal that the rate of binding depends on the pH and the Bi³⁺ anion.