Degradation of nitrocellulose-based paint by Desulfovibrio desulfuricans ATCC 13541

Microorganisms for the oxidation of nitrated cellulose in its effluents (review)

The processes of microbiological destruction of toxic and large-tonnage waste are the most attractive processes for protecting the environment. The review considers the results of studies of microbial decomposition of nitrate esters, including hardly decomposable nitrocellulose. The published data show that specific microorganisms are able to degrade nitrated cellulose compounds under both anaerobic and aerobic conditions. The most promising microorganisms in terms of the efficiency of the nitrocellulose degradation process are bacteria belonging to Desulfovibrio genera, fungi Fusarium solani and Sclerotium rolfsii, as well as their co-cultivation. Recently, the first information about the enzymes involved in the process of nitrocellulose degradation, possible mechanisms of reactions carried out by these enzymes, and the effect of electron donors and acceptors adding to the process have been obtained. Contamination of industrial wastewater with nitrocellulose leads to treatment necessity by using cost-effective, harmless methods. A combined aerobic-anaerobic system, including both bacteria and fungi, has shown hopeful results.

Sustained-release nitrate combined with microbial fuel cell: A novel strategy for PAHs and odor removal from sediment

Nitrate addition is a biostimulation technique that can improve both the oxidation of acid volatile sulfide (AVS) through autotrophic denitrification and the biodegradation of polycyclic aromatic hydrocarbons (PAHs) via heterotrophic denitrification. However, during the remediation, parts of the dissolved nitrate in the sediment migrates from the sediment to the overlying water, leading to the loss of effective electron acceptor. To overcome this limitation, a combined approached was proposed, which involved nitrocellulose addition and a microbial fuel cell (MFC). Results indicated the nitrate could be slowly released and maintained at a higher concentration over long term. In the combined system, the removal efficiencies of PAHs and AVS were 71.56% and 89.76%, respectively. Furthermore, the voltage attained for the MFC-nitrocellulose treatment was maintained at 146.1 mV on Day 70, which was 5.37 times higher than that of the MFC-calcium nitrate treatment. Sediments with nitrocellulose resulted in lower levels of nitrate and ammonium in the overlying water. Metagenomic results revealed that the combined technology improved the expression of nitrogen-cycling genes. The introduction of MFC inhibited sulfide regeneration during incubation by suppressing the enzyme activity like EC4.4.1.2. The enhanced biostimulation provided potential for in-situ bioremediation utilizing MFC coupled with slow-released nitrate (i.e., nitrocellulose) treatment.

Chemical characterisation of artists' spray-paints: A diagnostic tool for urban art conservation

In this study the chemical characterisation of 24 commercial spray-paints in different colours as used in contemporary public murals, street art, and graffiti is presented. The analyses were focused on the identification of the binding media, pigments, and additives. In addition, four spray-paint samples were analysed in the form of bi-layered paint films to explore the possibility of determining the composition of multi-layered samples. The aim of the study was to provide a useful diagnostic tool for the conservation of spray-paints and the removal of overpaintings from both commissioned murals and any other form of cultural heritage. To achieve this goal, a multi-analytical approach was developed using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) for the identification of the main binder, pigments, and fillers/extenders, while Raman spectroscopy and Scanning Electron Microscopy/Energy Dispersive X-ray Spectroscopy (SEM/EDS) were used as complementary tools for the determination of organic and inorganic pigments, and fillers. Five kinds of binders were detected in this work: (1) acrylic resins combined with nitrocellulose, (2) acrylic resins modified with styrene and combined with nitrocellulose, (3) alkyd resins modified with styrene and combined with nitrocellulose, (4) combined acrylic and alkyd resins modified with styrene and blended with nitrocellulose, and (5) combined polystyrene and acrylic resins. Also, a wide variety of organic pigments and inorganic components were detected.

Microbial Deterioration of the Archaeological Nujoumi Dome (Egypt-Aswan): Identification and Suggested Control Treatments by Natural Products

Biodeterioration plays a significant role in the damage and loss of monuments including gypsum work. Bacteria and fungi are mainly responsible for the biodeterioration of gypsum work. Thus, the present study aimed to evaluate the effects of essential oils (Thyme, clove, cinnamon, garlic, castor, and olive) on the growth of the main fungi and bacteria which isolated from the Nujoumi Dome which is also called the Dome of the Toshka Martyrs and is located in Aswan, Egypt. Microbial swabs were taken from these infected objects, and the isolated microorganisms were characterized. The next genera were identified: four fungal isolates were isolated and identified as Aspergillus japonicas, Aspergillus terrus, Penicillium commune, and Cladosporium elatum while two species of bacteria were isolated, identified as Bacillus cereus and Listeria monocytogenes. Garlic oil had the best effect on all isolates, showing 35 and 33 mm inhibition of growth of Bacillus cereus and Listeria monocytogenes, respectively, while 28 mm inhabitation of growth of Penicillium commune, 25 mm inhibition of Aspergillus japonicas, and finally 20 mm inhibition of both Aspergillus terrus and Cladosporium elatum. In conclusion, garlic oil could be an effective natural product for controlling the biodeterioration.

One-Pot Reducing Agent-Free Synthesis of Silver Nanoparticles/Nitrocellulose Composite Surface Coating with Antimicrobial and Antibiofilm Activities

Nitrocellulose with silver nanoparticle (AgNP/NC) composite was prepared in situ using Ag(CH₃CO₂) and nitrocellulose without any reducing agent. The composite materials synthesized were spray coated onto glass substrates to obtain thin films. The AgNPs/NC composites were characterized by ultraviolet-visible, Fourier transform infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The antimicrobial activity of AgNPs/NC composite was investigated by tube method and time-kill kinetic studies against three microbial species, including Pseudomonas aeruginosa (ATCC 27853), Staphylococcus aureus (ATCC 25923), and Candida albicans (ATCC 10231). The antibiofilm activities were qualitatively determined against all three organisms. Prepared AgNPs/NC films exhibited good antimicrobial activity and significant inhibition of biofilm development against all three microbial species. The effective dispersion of AgNPs/NC in biofilm was responsible for the significant antibiofilm activity of the prepared material. The reported AgNPs/NC composite can be used as coating additive in bacteriocidal paint which can be applied onto surfaces such as in healthcare environments.

Anaerobic biodegradation of fluoxetine using a high-performance bacterial community

Fluoxetine (FLX), an antidepressant extensively used worldwide is considered an emerging pollutant. The present work intends to investigate for the first time the capacity of a bacterial community containing sulphate-reducing bacteria (SRB) enriched from an anaerobic sludge to biodegrade and use FLX as sole carbon source, since current literature suggests that this drug is poorly biodegraded being mainly removed by adsorption to sediments, where it persists. FLX was biodegraded under sulphate reducing conditions until reaching its lowest and reliably detectable concentration, when 20 mg/L of the drug was used as sole carbon source, while 66 ± 9% of 50 mg/L FLX was removed, after 31 days. The initial bacterial population was mainly constituted by Desulfomicrobium and Desulfovibrio whereas during the experiments using FLX as unique carbon source a clear shift occurred with the increase of vadinBC27 wastewater-sludge group, Macellibacteroidetes, Dethiosulfovibrio, Bacteroides, Tolumonas, Sulfuricurvum, f_Enterobacteriaceae_OTU_18 that are assumed for the first time as FLX degrading bacteria. Although the main mechanism of FLX removal described in literature is by adsorption, in the results herein presented anaerobic biodegradation appears to play the main role in the removal of the FLX, thus demonstrating the potentialities that the anaerobic processes can play in wastewater treatment aiming the removal of new emerging compounds.

Bioremoval of graffiti using novel commercial strains of bacteria

Previous studies have provided evidence that bioremediation deals a novel approach to graffiti removal, thereby overcoming well-known limitations of current cleaning methods. In the present study eight bacteria aerobic, mesophilic and culturable from the American ATCC and the German DSMZ collections of microorganisms, some isolated from car paint waste, colored deposits in a pulp dryer and wastewater from dye works, were tested in the removal of silver and black graffiti spray paints using immersion strategies with glass slides. Absorbance at 600 nm and live/dead assays were performed to estimate bacterial density and activity in all samples. Also, pH and dissolved organic carbon (DOC) and inorganic carbon (DIC) measurements in the liquid media were made, as well as, thickness, colorimetric and infrared (FTIR) spectroscopy measurements in graffiti paint layers were used to evaluate the presence of the selected bacteria in the samples and the graffiti bioremoval capacity of bacteria. Data demonstrated that of the eight bacteria studied, Enterobacter aerogenes, Comamonas sp. and a mixture of Bacillus sp., Delftia lacustris, Sphingobacterium caeni, and Ochrobactrum anthropi were the most promising for bioremoval of graffiti. According to significant changes in FTIR spectra, indicating an alteration of the paint polymeric structure, coupled with the presence of a consistent quantity of live bacteria in the medium as well as a significant increase of DIC (a measure of metabolic activity) and a change in paint color.

Biocleaning on Cultural Heritage: new frontiers of microbial biotechnologies

Over the last two decades, the biotechnologies applied to Cultural heritage (CH) have become a successful novel alternative to the traditional approaches in the CH conservation and preservation. From these new perspectives, microorganisms and their metabolisms can be used for the safeguarding of artworks. Biocleaning is a field with a growing interest, based on eco-friendly processes and safe procedures, where biological reactions occurring in natural habitats are optimized in artificial conditions with the aim of CH conservation. This represents a new tool and opportunity for the development and improvement of the sector, with a great advantage for the CH conservation-restoration, in terms of safety, effectiveness, costs and environmental sustainability. This review focuses on the use of microbes and enzymes involved in biocleaning of CH artworks. The aim is to provide a comprehensive, critical and chronological view of the scientific works published until now where 'virtuous' microorganisms are applied on different CH materials, pointing out strength and drawback of the biocleaning treatments.

Overcoming Challenges in Street Art Murals Conservation: A Comparative Study on Cleaning Approach and Methodology

Street art, and its preservation, has become one of the most discussed and still open topics in the field of conservation. The absence of a sharable conservation protocol in terms of cleaning and protection is a delicate subject to deal with. The cleaning of contemporary murals and urban artworks stained by graphical vandalism is a real challenge, due to the similar chemical composition of the materials involved. In this work two different approaches to the cleaning of street art murals, namely chemical methods and laser cleaning, are reported and compared with the aim of identifying a suitable conservation practice. Ad hoc concrete mock-ups coated with a paint layer and a simulated vandalism on top have been prepared and used for the testing and analytical assessment of the cleaning procedures.

Selected Aspects Regarding the Restoration/Conservation of Traditional Wood and Masonry Building Materials: A Short Overview of the Last Decade Findings

Vernacular buildings are usually constructed using materials at hand, including wood, natural stone and bricks (either clay or mud bricks). All those materials are exposed to a series of environmental factors, affecting their structure and integrity. The literature review was conducted using different databases (Scopus, Web of Science, ScienceDirect, SpringerLink) using as keywords the historical material, “heritage” and the terms regarding the desired effect, within the envisaged time period (2010–2019). The assessment of the results was performed by manual inspection (reading the entire article) and the selection of the works to be inserted in the current review was made by evaluating the contribution to the field. This review summarizes different aspects related to the restoration and conservation of wooden and masonry elements of traditional buildings, including materials used for biocidal interventions, protection against abiotic factors, cleaning and consolidation agents. Finally, a critical discussion regarding the current limitations and future perspectives concludes the review work, envisaging the role of researchers specialized in materials science in the context of cultural heritage conservation.

Testing Anti-Biofilm Polymeric Surfaces: Where to Start?

Present day awareness of biofilm colonization on polymeric surfaces has prompted the scientific community to develop an ever-increasing number of new materials with anti-biofilm features. However, compared to the large amount of work put into discovering potent biofilm inhibitors, only a small number of papers deal with their validation, a critical step in the translation of research into practical applications. This is due to the lack of standardized testing methods and/or of well-controlled in vivo studies that show biofilm prevention on polymeric surfaces; furthermore, there has been little correlation with the reduced incidence of material deterioration. Here an overview of the most common methods for studying biofilms and for testing the anti-biofilm properties of new surfaces is provided.

The Potential Use of Microorganisms as Restorative Agents: An Update

The biodeterioration process involves every type of Cultural Heritage item, including monuments, stoneworks, frescoes, and easel paintings. The accurate study of the microbial and fungal communities dwelling on artworks, and involved in their deterioration, is essential for the adoption of optimal prevention and conservation strategies. Conventional restorative methods, that usually involve chemical and physical technologies, present some disadvantages, including short-term and unsatisfactory effects, potential damage to the treated works, human toxicity, and environmental hazards. Research in the field of restoration has paved the way for innovative biological approaches, or ‘biorestoration’, in which microorganisms are not only considered as an eventual danger for artworks, but rather as potential tools for restoration. The present review describes the main aspects of the biodeterioration process and highlights the most relevant biorestoration approaches: bioconsolidation, biocleaning, biological control, and new promising bio-decontaminating compounds.

Biocleaning to Remove Graffiti: A Real Possibility? Advances towards a Complete Protocol of Action

The first academic studies on the use of microorganisms in cleaning procedures appeared in the late 1980s/early 1990s. In the past thirty years, most of such studies have addressed the removal of nitrate and sulphate salts and organic matter from surfaces by using non-pathogenic anaerobic microorganisms, mainly sulphate-reducing bacteria. The successful use of microbes in the removal of graffiti paint remains, however, a work in progress. Biocleaning surfaces to remove graffiti is not a simple task, because of the complex chemical composition of graffiti paints. This study looks at ways of improving the bioremoval of graffiti and presents the latest findings regarding different methodological aspects of cleaning natural and man-made stone. Granite and concrete substrates were coated with silver and black graffiti spray paints for comparison of the efficacy of the biocleaning method on these different materials. Visual and microscopic examination along with colour and infrared measurements made after application of the bacterial strains tested (previously shown to be suitable candidates for bioremoval of graffiti) revealed remarkably successful results. The findings presented thus represent progress in the development of a biocleaning protocol applicable to the in-situ removal of graffiti. Important improvements have been made regarding the time of treatment, which has been reduced by up to 20 days, and the use of a culture medium enriched with powdered graffiti, which facilitates and accelerates the adaptation of the microorganisms to the target surface.

Application of Microbial Cleaning Technology for Removal of Surface Contamination

Microbial cleaning takes advantage of naturally-occurring microbes to remove a wide variety of contaminants from various surfaces. The method is based on the affinity of microbes for hydrocarbons that are digested, producing harmless carbon dioxide, water, and soluble fatty acids. The microbes are nonpathogenic and are safe to handle and dispose. The process is environmentally-friendly and is less expensive than solvent cleaning, but it is not applicable to high precision cleaning applications. Typical applications include parts washing; oil and grease removal from concrete and other floor surfaces, and from drains and grease traps; cleaning and disinfection in healthcare facilities; cleaning of historical artworks and structures; and household and institutional cleaning applications.

Biogenic platinum and palladium nanoparticles as new catalysts for the removal of pharmaceutical compounds

Pharmaceutical products (PhP) are one of the most alarming emergent pollutants in the environment. Therefore, it is of extreme importance to investigate efficient PhP removal processes. Biologic synthesis of platinum nanoparticles (Bio-Pt) has been reported, but their catalytic activity was never investigated. In this work, we explored the potential of cell-supported platinum (Bio-Pt) and palladium (Bio-Pd) nanoparticles synthesized with Desulfovibrio vulgaris as biocatalysts for removal of four PhP: ciprofloxacin, sulfamethoxazole, ibuprofen and 17β-estradiol. The catalytic activity of the biological nanoparticles was compared with the PhP removal efficiency of D. vulgaris whole-cells. In contrast with Bio-Pd, Bio-Pt has a high catalytic activity in PhP removal, with 94, 85 and 70% removal of 17β-estradiol, sulfamethoxazole and ciprofloxacin, respectively. In addition, the estrogenic activity of 17β-estradiol was strongly reduced after the reaction with Bio-Pt, showing that this biocatalyst produces less toxic effluents. Bio-Pt or Bio-Pd did not act on ibuprofen, but this could be completely removed by D. vulgaris whole-cells, demonstrating that sulfate-reducing bacteria are among the microorganisms capable of biotransformation of ibuprofen in anaerobic environments. This study demonstrates for the first time that Bio-Pt has a high catalytic activity, and is a promising catalyst to be used in water treatment processes for the removal of antibiotics and endocrine disrupting compounds, the most problematic PhP.

Immobilized Hydrolytic Enzymes Exhibit Antibiofilm Activity Against Escherichia coli at Sub-Lethal Concentrations

The effects of two commercially available immobilized enzymes (namely the glycosidase pectinase and the protease subtilisin A) at sub-lethal concentrations were investigated in terms of their influence on biofilm genesis, on the composition of the biofilm matrix, and their antibiotic synergy against Escherichia coli biofilm, used as a model system of bacterial biofilms. The best antibiofilm performance of solid-supported hydrolases was obtained at the surface concentration of 0.022 and 0.095 U/cm(2) with a reduction of 1.2 and 2.3 log CFU/biofilm for pectinase and subtilisin, respectively. At these enzyme surface concentrations, the biocatalysts affected the structural composition of the biofilm matrix, impacting biofilm thickness. Finally, the immobilized hydrolases enhanced biofilm sensitivity to a clinically relevant concentration of the antibiotic ampicillin. At the final antibiotic concentration of 0.1 mg/ml, a reduction of 2 and 3.5 log10 units in presence of 0.022 Upectinase/cm(2) and 0.095 Usubtilisin/cm(2) was obtained, respectively, in comparison the antibiotic alone. Immobilized pectinase and subtilisin at sub-lethal concentrations demonstrated a great potential for antibiofilm applications.