1
|
Cossey HL, Kaminsky HAW, Ulrich AC. Effects of pressure on the biogeochemical and geotechnical behavior of treated oil sands tailings in a pit lake scenario. CHEMOSPHERE 2024; 365:143395. [PMID: 39313078 DOI: 10.1016/j.chemosphere.2024.143395] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2024] [Revised: 09/06/2024] [Accepted: 09/20/2024] [Indexed: 09/25/2024]
Abstract
Reclamation options for oil sands fluid fine tailings (FFT) are limited due to its challenging geotechnical properties, which include high water and clay contents and low shear strength. A feasible reclamation option for tailings with these properties is water capped FFT deposits (pit lakes). A relatively new proposal is to deposit FFT that has been treated with alum and polyacrylamide in pit lakes. Though over 65 Mm3 of alum/polyacrylamide treated FFT has been deposited to date, there is limited publicly available information on the biogeochemical and geotechnical behavior of this treated FFT. Further, the effects of pressure from overlying tailings on microbial activity and biogeochemical cycling in oil sands tailings has not been previously investigated. Twelve 5.5 L columns were designed to mimic alum/polyacrylamide treated FFT deposited beneath a water cap. A 2x2 factorial design was used to apply pressure and hydrocarbon amendments to the tailings. Pressure (0.3-5.1 kPa) was applied incrementally and columns were monitored for 360 d. Pressure significantly enhanced consolidation and microbial activity in treated FFT. Columns with pressure generated significantly more CH4(g) and CO2(g) and had significant increases in dissolved organic carbon and chemical oxygen demand in the FFT and water caps. The enhanced microbial activity in columns with pressure indicates that pressure increased the solubility of microbial substrates and metabolites in the tailings, thereby increasing the bioavailability of these compounds. Ammonium generation was significantly higher in columns with pressure, suggesting that microorganisms utilized polyacrylamide and/or N2 fixation as a nitrogen source to meet enhanced nutrient demands. Pressure also impacted microbial community structure, shifting methanogenic communities from hydrogenotrophic methanogens to predominately acetoclastic methanogens. This study also revealed the importance of sulfur cycling in treated FFT. Extensive sulfate reduction occurred in all columns, generating dissolved sulfides and H2S(g), and this was accelerated by hydrocarbon amendments.
Collapse
Affiliation(s)
- Heidi L Cossey
- Department of Civil & Environmental Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada
| | - Heather A W Kaminsky
- Centre for Energy and Environmental Sustainability, Northern Alberta Institute of Technology, Edmonton, Alberta, T5G 0Y2, Canada
| | - Ania C Ulrich
- Department of Civil & Environmental Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada.
| |
Collapse
|
2
|
Li J, Usman M, Arslan M, Gamal El-Din M. Molecular and microbial insights towards anaerobic biodegradation of anionic polyacrylamide in oil sands tailings. WATER RESEARCH 2024; 258:121757. [PMID: 38768520 DOI: 10.1016/j.watres.2024.121757] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/10/2024] [Revised: 04/22/2024] [Accepted: 05/08/2024] [Indexed: 05/22/2024]
Abstract
Anionic polyacrylamide (A-PAM) is widely used as a flocculant in the management of oil sands tailings. Nevertheless, apprehensions arise regarding its potential biodegradation and environmental consequences within the context of oil sands tailings. Consequently, it is imperative to delve into the anaerobic biodegradation of A-PAM in oil sands tailings to gain a comprehensive understanding of its influence on tailings water quality. This work explored the dynamics of A-PAM biodegradation across concentrations: 50, 100, 250, 500, 1000, and 2000 mg/kg TS. The results showed a significant decrease in A-PAM concentration and molecular weight at lower concentrations (50 and 100 mg/kg TS) compared to higher ones, suggesting enhanced degradation efficiency. Likewise, the organic transformation and methane production exhibited dependency on A-PAM concentrations. The peak concentrations observed were 20.0 mg/L for volatile fatty acids (VFAs), 0.07 mg/L for acrylamide (AMD), and 8.9 mL for methane yield, with these maxima being recorded at 50 mg/kg TS. The biodegradation efficiency diminishes at higher concentrations of A-PAM, potentially due to the inhibitory effects of polyacrylic acid accumulation. A-PAM biodegradation under anaerobic condition did not contribute to acute toxicity or genotoxicity. SEM-EDS, FT-IR and XRD analyses further revealed that higher concentrations of A-PAM inhibited the biodegradation by altering floc structure and composition, thereby restricting the microbial activity. Major microorganisms, including Smithella, Candidatus_Cloacimonas, W5, XBB1006, and DMER64 were identified, highlighting A-PAM's dual role as a source of carbon and nitrogen under anaerobic conditions. The above findings from this research not only significantly advance understanding of A-PAM's environmental behavior but also contribute to the effective management practices in oil sands tailings.
Collapse
Affiliation(s)
- Jia Li
- Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada
| | - Muhammad Usman
- Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada
| | - Muhammad Arslan
- Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada
| | - Mohamed Gamal El-Din
- Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada.
| |
Collapse
|
3
|
Khan M. Chemical and Physical Architecture of Macromolecular Gels for Fracturing Fluid Applications in the Oil and Gas Industry; Current Status, Challenges, and Prospects. Gels 2024; 10:338. [PMID: 38786255 PMCID: PMC11121287 DOI: 10.3390/gels10050338] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2024] [Revised: 05/01/2024] [Accepted: 05/09/2024] [Indexed: 05/25/2024] Open
Abstract
Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers are employed as viscosifiers and friction reducers to provide proppants in fracturing fluids as a transport medium. There are numerous systems for fracturing fluids based on macromolecules. The employment of natural and man-made linear polymers, and also, to a lesser extent, synthetic hyperbranched polymers, as additives in fracturing fluids in the past one to two decades has shown great promise in enhancing the stability of fracturing fluids under various challenging reservoir conditions. Modern innovations demonstrate the importance of developing chemical structures and properties to improve performance. Key challenges include maintaining viscosity under reservoir conditions and achieving suitable shear-thinning behavior. The physical architecture of macromolecules and novel crosslinking processes are essential in addressing these issues. The effect of macromolecule interactions on reservoir conditions is very critical in regard to efficient fluid qualities and successful fracturing operations. In future, there is the potential for ongoing studies to produce specialized macromolecular solutions for increased efficiency and sustainability in oil and gas applications.
Collapse
Affiliation(s)
- Majad Khan
- Department of Chemistry, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran 31261, Saudi Arabia; ; Tel.: +966-0138601671
- Interdisciplinary Research Center for Hydrogen Technologies and Energy Storage (IRC-HTCM), King Fahd University of Petroleum & Minerals (KFUPM), Dhahran 31261, Saudi Arabia
- Interdisciplinary Research Center for Refining and Advanced Chemicals (IRC-CRAC), King Fahd University of Petroleum & Minerals (KFUPM), Dhahran 31261, Saudi Arabia
| |
Collapse
|
4
|
Wang F, Zhang L, Zhang D, Wu X, Deng S. Binding of Anionic Polyacrylamide with Amidase and Laccase under 298, 303, and 308 K: Docking and Molecular Dynamics Simulation Studies Combined with Experiments. ACS OMEGA 2023; 8:10040-10050. [PMID: 36969392 PMCID: PMC10034835 DOI: 10.1021/acsomega.2c07380] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/17/2022] [Accepted: 02/28/2023] [Indexed: 06/18/2023]
Abstract
Amidase and laccase play a key role in the degradation process of anionic polyacrylamide (HPAM). However, the largest challenge of HPAM enzymatic degradation is whether the enzyme can bind with a substrate for a period of time. Here, the most suitable complexes, namely, Rh Amidase-HPAM-2 and Bacillus subtilis (B. subtilis) laccase-HPAM-3, were obtained by docking, and they were carried out for molecular dynamics simulation (MDS) under 298, 303, and 308 K. MDS result analysis showed that Rh Amidase-HPAM-2 was the most stable at 298 K mainly due to a salt bridge and a hydrogen bond, and B. subtilis laccase-HPAM-3 was the most stable at 298 K mainly due to two electrostatic and hydrogen bonds. The LYS96 in Rh Amidase-HPAM-2 and LYS135 in B. subtilis laccase-HPAM-3 had been the most important in their binding process. The binding of Rh Amidase-HPAM-2 and B. subtilis laccase-HPAM-3 was optimal at 303 and 298 K, respectively. HPAM was degraded by mixed bacteria, and the optimal conditions were determined to be 308 K, initial pH = 7, and an inoculated dosage of 2 mL. Under these conditions, the degradation ratio reached 39.24%. The effect of parameters on the HPAM degradation ratio followed a decreasing order of temperature > initial pH > inoculated dosage. The HPAM codegradation mechanism was supposed by mixed bacteria according to test data. The mixed bacteria secreted both amidase and laccase, and they interacted jointly with HPAM. These results lay a theoretical foundation to design and modify the enzyme through mutation experiments in the future.
Collapse
Affiliation(s)
- Fanglue Wang
- School
of Bioengineering, Huainan Normal University, Huainan 232038, China
| | - Liwen Zhang
- School
of Mechanical and Electrical Engineering, Huainan Normal University, Huainan 232038, China
| | - Dongchen Zhang
- School
of Materials Science and Engineering, Anhui
University of Science and Technology, Huainan 232001, China
| | - Xuefeng Wu
- School
of Food and Bioengineering, Hefei University
of Technology, Hefei 230009, China
| | - Shengsong Deng
- School
of Food and Bioengineering, Hefei University
of Technology, Hefei 230009, China
| |
Collapse
|
5
|
Abed RMM, Al-Fori M, Al-Hinai M, Al-Sabahi J, Al-Battashi H, Prigent S, Headley T. Effect of partially hydrolyzed polyacrylamide (HPAM) on the bacterial communities of wetland rhizosphere soils and their efficiency in HPAM and alkane degradation. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:9713-9724. [PMID: 36063269 DOI: 10.1007/s11356-022-22636-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/06/2022] [Accepted: 08/17/2022] [Indexed: 06/15/2023]
Abstract
The effect of partially hydrolyzed polyacrylamide (HPAM) on structure and function of rhizosphere soil bacterial communities in constructed wetlands has been largely underinvestigated. In this study, we compare the effect of 250, 500, and 1000 mg/L of HPAM on bacterial community composition of Phragmites australis associated rhizosphere soils in an experimental wetland using MiSeq amplicon sequencing. Rhizosphere soils from the HPAM-free and the 500-mg/L-exposed treatments were used for laboratory experiments to further investigate the effect of HPAM on the soil's degradation and respiration activities. Soils treated with HPAM showed differences in bacterial communities with the dominance of Proteobacteria and the enrichment of potential hydrocarbon and HPAM-degrading bacteria. CO2 generation was higher in the HPAM-free soils than in the HPAM pre-exposed soil, with a noticeable increase in both soils when oil was added. The addition of HPAM at different concentrations had a more pronounced effect on CO2 evolution in the HPAM-pre-exposed soil. Soils were able to degrade between 37 ± 18.0 and 66 ± 6.7% of C10 to C30 alkanes after 28 days, except in the case of HPAM-pre-exposed soil treated with 500 mg/L where degradation reached 92 ± 4.3%. Both soils reduced HPAM concentration by 60 ± 15% of the initial amount in the 500 mg/L treatment, but by only ≤ 21 ± 7% in the 250-mg/L and 1000-mg/L treatments. In conclusion, the rhizosphere soils demonstrated the ability to adapt and retain their ability to degrade hydrocarbon in the presence of HPAM.
Collapse
Affiliation(s)
- Raeid M M Abed
- Biology Department, College of Science, Sultan Qaboos University, Al Khoud, P.O. Box: 36, PC 123, Al Seeb, Sultanate of Oman.
| | - Marwan Al-Fori
- Biology Department, College of Science, Sultan Qaboos University, Al Khoud, P.O. Box: 36, PC 123, Al Seeb, Sultanate of Oman
| | - Mahmood Al-Hinai
- Biology Department, College of Science, Sultan Qaboos University, Al Khoud, P.O. Box: 36, PC 123, Al Seeb, Sultanate of Oman
| | - Jamal Al-Sabahi
- Central Instrumentation Laboratory, College of Agricultural & Marine Sciences, Sultan Qaboos University, Al Khoud, P.O. Box: 34, PC 123, Al Seeb, Sultanate of Oman
| | - Huda Al-Battashi
- Biology Department, College of Science, Sultan Qaboos University, Al Khoud, P.O. Box: 36, PC 123, Al Seeb, Sultanate of Oman
| | - Stephane Prigent
- BAUER Nimr LLC, P.C 114, Al Mina, P.O. Box 1186, Muscat, Sultanate of Oman
| | - Tom Headley
- BAUER Nimr LLC, P.C 114, Al Mina, P.O. Box 1186, Muscat, Sultanate of Oman
| |
Collapse
|
6
|
Cliffe L, Hernandez-Becerra N, Boothman C, Eden B, Lloyd JR, Nixon SL. Guar Gum Stimulates Biogenic Sulfide Production in Microbial Communities Derived from UK Fractured Shale Production Fluids. Microbiol Spectr 2022; 10:e0364022. [PMID: 36453927 PMCID: PMC9769687 DOI: 10.1128/spectrum.03640-22] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/23/2022] [Accepted: 11/10/2022] [Indexed: 12/03/2022] Open
Abstract
Shale gas production fluids offer a window into the engineered deep biosphere. Here, for the first time, we report on the geochemistry and microbiology of production fluids from a UK shale gas well in the Bowland shale formation. The composition of input fluids used to fracture this well were comparatively lean, consisting only of water, sand, and polyacrylamide. This formation therefore represents an interesting comparison to previously explored fractured shales in which more additives were used in the input fluids. Here, we combine cultivation and molecular ecology techniques to explore the microbial community composition of hydraulic fracturing production fluids, with a focus on the potential for common viscosity modifiers to stimulate microbial growth and biogenic sulfide production. Production fluids from a Bowland Shale exploratory well were used as inocula in substrate utilization experiments to test the potential for polyacrylamide and guar gum to stimulate microbial metabolism. We identified a consortium of thiosulfate-reducing bacteria capable of utilizing guar gum (but not polyacrylamide), resulting in the production of corrosive and toxic hydrogen sulfide. Results from this study indicate polyacrylamide is less likely than guar gum to stimulate biogenic sulfide production during shale gas extraction and may guide planning of future hydraulic fracturing operations. IMPORTANCE Shale gas exploitation relies on hydraulic fracturing, which often involves a range of chemical additives in the injection fluid. However, relatively little is known about how these additives influence fractured shale microbial communities. This work offers a first look into the microbial community composition of shale gas production fluids obtained from an exploratory well in the Bowland Shale, United Kingdom. It also seeks to establish the impact of two commonly used viscosity modifiers, polyacrylamide and guar gum, on microbial community dynamics and the potential for microbial sulfide production. Not only does this work offer fascinating insights into the engineered deep biosphere, it could also help guide future hydraulic fracturing operations that seek to minimize the risk of biogenic sulfide production, which could reduce efficiency and increase environmental impacts of shale gas extraction.
Collapse
Affiliation(s)
- Lisa Cliffe
- Department of Earth and Environmental Sciences, The University of Manchester, Manchester, United Kingdom
| | - Natali Hernandez-Becerra
- Department of Earth and Environmental Sciences, The University of Manchester, Manchester, United Kingdom
| | - Christopher Boothman
- Department of Earth and Environmental Sciences, The University of Manchester, Manchester, United Kingdom
| | - Bob Eden
- Rawwater Engineering Company Limited, Culcheth, United Kingdom
| | - Jonathan R. Lloyd
- Department of Earth and Environmental Sciences, The University of Manchester, Manchester, United Kingdom
| | - Sophie L. Nixon
- Department of Earth and Environmental Sciences, The University of Manchester, Manchester, United Kingdom
- Manchester Institute of Biotechnology, The University of Manchester, Manchester, United Kingdom
| |
Collapse
|
7
|
Zhang X, Wei S, Zhang D, Lu P, Huang Y. Efficient sulfur cycling improved the performance of flowback water treatment in a microbial fuel cell. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 323:116368. [PMID: 36261973 DOI: 10.1016/j.jenvman.2022.116368] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 09/20/2022] [Accepted: 09/22/2022] [Indexed: 06/16/2023]
Abstract
The sulfate-reducing mediate microbial fuel cell (MFC) shows advantages in treating recalcitrant flowback water (FW) from shale gas extraction, but the stability under fluctuant concentrations of sulfate in FW remains unknown. Herein, we investigated the impact of fluctuant sulfate concentrations on the performance of FW treatment in MFCs. Sulfate concentration showed a significant role in the MFC treating FW, with a COD removal of 69.8 ± 9.7% and a peak power density of 2164 ± 396 mW/m3 under 247.5 mg/L sulfate, but only 39.1% and 1216 mW/m3 under 50 mg/L sulfate. The fluctuation of sulfate in a short time allowed to a stable performance, but a longtime intermittent decrease of feeding sulfate concentration significantly inhibited power generation to no more than 512 mW/m3. The sulfur cycling between sulfate and sulfide existed in the system, but the cycling rate became much lower after the longtime intermittent decrease, with resulting to the decreased power generation. Abundant sulfur-oxidizing bacteria (SOB) of Desulfuromonadaceae and Helicobacteraceae in the MFC stably feeding with 247.5 mg/L sulfate supported a high sulfur cycling rate. With the cooperation of abundant sulfate-reducing bacteria (SRB) of Desulfovibrionaceae (capable of producing electricity) on the anode and Desulfobacteraceae in anolyte, this sulfur cycling endowed the MFC with high sulfate tolerance and critically contributed to recalcitrant organics removal and power generation. However, much less SOB of Helicobacteraceae and Campylobacteraceae on the anode with high S0 accumulation on the surface after the longtime intermittent decrease of sulfate likely led to the low sulfur cycling rate. With also less SRB of Marinilabiaceae (capable of producing electricity) and Synergistaceae in the system, this low sulfur cycling rate thus hampered power generation. This research provides an important reference for the bioelectrochemical treatment of wastewater containing recalcitrant organics and sulfate.
Collapse
Affiliation(s)
- Xiaoting Zhang
- College of Resources and Environment, Southwest University, Chongqing, 400715, China; Chongqing Key Laboratory of Agricultural Resources and Environment, Chongqing, 400715, China; State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China
| | - Shiqiang Wei
- College of Resources and Environment, Southwest University, Chongqing, 400715, China; Chongqing Key Laboratory of Agricultural Resources and Environment, Chongqing, 400715, China
| | - Daijun Zhang
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China; Department of Environmental Science, Chongqing University, Chongqing, 400044, China.
| | - Peili Lu
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China; Department of Environmental Science, Chongqing University, Chongqing, 400044, China
| | - Yongkui Huang
- National and Local Joint Engineering Research Center of Shale Gas Exploration and Development, Chongqing Institute of Geology and Mineral Resources, Chongqing, 401120, China
| |
Collapse
|
8
|
Al-Kindi S, Al-Bahry S, Al-Wahaibi Y, Taura U, Joshi S. Partially hydrolyzed polyacrylamide: enhanced oil recovery applications, oil-field produced water pollution, and possible solutions. ENVIRONMENTAL MONITORING AND ASSESSMENT 2022; 194:875. [PMID: 36227428 PMCID: PMC9558033 DOI: 10.1007/s10661-022-10569-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2021] [Accepted: 03/19/2022] [Indexed: 05/27/2023]
Abstract
Polymers, such as partially hydrolyzed polyacrylamide (HPAM), are widely used in oil fields to enhance or improve the recovery of crude oil from the reservoirs. It works by increasing the viscosity of the injected water, thus improving its mobility and oil recovery. However, during such enhanced oil recovery (EOR) operations, it also produces a huge quantity of water alongside oil. Depending on the age and the stage of the oil reserve, the oil field produces ~ 7-10 times more water than oil. Such water contains various types of toxic components, such as traces of crude oil, heavy metals, and different types of chemicals (used during EOR operations such as HPAM). Thus, a huge quantity of HPAM containing produced water generated worldwide requires proper treatment and usage. The possible toxicity of HPAM is still ambiguous, but its natural decomposition product, acrylamide, threatens humans' health and ecological environments. Therefore, the main challenge is the removal or degradation of HPAM in an environmentally safe manner from the produced water before proper disposal. Several chemical and thermal techniques are employed for the removal of HPAM, but they are not so environmentally friendly and somewhat expensive. Among different types of treatments, biodegradation with the aid of individual or mixed microbes (as biofilms) is touted to be an efficient and environmentally friendly way to solve the problem without harmful side effects. Many researchers have explored and reported the potential of such bioremediation technology with a variable removal efficiency of HPAM from the oil field produced water, both in lab scale and field scale studies. The current review is in line with United Nations Sustainability Goals, related to water security-UNSDG 6. It highlights the scale of such HPAM-based EOR applications, the challenge of produced water treatment, current possible solutions, and future possibilities to reuse such treated water sources for other applications.
Collapse
Affiliation(s)
- Shatha Al-Kindi
- Department of Biology, College of Science, Sultan Qaboos University, Muscat, Oman
| | - Saif Al-Bahry
- Department of Biology, College of Science, Sultan Qaboos University, Muscat, Oman
- Oil & Gas Research Center, Sultan Qaboos University, Muscat, Oman
| | - Yahya Al-Wahaibi
- A'Sharqiyah University, Postal Code: 400, P.O. Box 42, Ibra, Oman
| | - Usman Taura
- Oil & Gas Research Center, Sultan Qaboos University, Muscat, Oman
| | - Sanket Joshi
- Oil & Gas Research Center, Sultan Qaboos University, Muscat, Oman.
| |
Collapse
|
9
|
Biodegradation of Polymers Used in Oil and Gas Operations: Towards Enzyme Biotechnology Development and Field Application. Polymers (Basel) 2022; 14:polym14091871. [PMID: 35567040 PMCID: PMC9100872 DOI: 10.3390/polym14091871] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/08/2022] [Revised: 04/15/2022] [Accepted: 04/18/2022] [Indexed: 12/04/2022] Open
Abstract
Linear and crosslinked polymers are commonly used in the oil and gas industry. Guar-derived polymers have been extensively utilized in hydraulic fracturing processes, and recently polyacrylamide and cellulose-based polymers have also found utility. As these polymers are used during various phases of the hydraulic fracturing process, they can accumulate at formation fracture faces, resulting in undesired filter cakes that impede oil and gas recovery. Although acids and chemical oxidizers are often added in the fracturing fluids to degrade or ‘break’ polymer filter cakes, the constant use of these chemicals can be hazardous and can result in formation damage and corrosion of infrastructure. Alternately, the use of enzymes is an attractive and environmentally friendly technology that can be used to treat polymer accumulations. While guar-linkage-specific enzyme breakers isolated from bacteria have been shown to successfully cleave guar-based polymers and decrease their molecular weight and viscosity at reservoir conditions, new enzymes that target a broader range of polymers currently used in hydraulic fracturing operations still require research and development for effective application. This review article describes the current state-of-knowledge on the mechanisms and enzymes involved in biodegradation of guar gum, polyacrylamide (and hydrolyzed polyacrylamide), and carboxymethyl cellulose polymers. In addition, advantages and challenges in the development and application of enzyme breaker technologies are discussed.
Collapse
|
10
|
Shi Y, Fang H, Li YY, Wu H, Liu R, Niu Q. Single and simultaneous effects of naphthalene and salinity on anaerobic digestion: Response surface methodology, microbial community analysis and potential functions prediction. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2021; 291:118188. [PMID: 34547659 DOI: 10.1016/j.envpol.2021.118188] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/17/2021] [Revised: 08/27/2021] [Accepted: 09/14/2021] [Indexed: 06/13/2023]
Abstract
Polycyclic aromatic hydrocarbons (PAHs) are a persistent and prevalent class of pollutants in petroleum-contaminated saline environment, which pose potential harm to organisms. Researches on anaerobic biodegradation of PAHs are gradually emerging, but the response of anaerobic microorganisms to salinity changes and the co-effects of salinity and PAHs in anaerobic digestion (AD) system have seldom been reported. Thus, we investigated the variations of AD system performance and anaerobic microbial community caused by different concentrations of naphthalene (Nap) or/and NaCl based on Box-Behnken Design (0 mg/L ≤ Nap ≤150 mg/L, 0 g/L ≤ NaCl ≤25 g/L). The promoted efficiencies of acidogenesis and methanogenesis were found in presence of moderate NaCl or Nap, but high salinity (NaCl >4.4 g/L) weakened AD performance. Moreover, the high salinity (NaCl >4.4 g/L) and Nap resulted in reduced microbial Ca2+ Mg2+- ATPase activity, poor EPS secretion and the highest difference of the microbial operational taxonomic units (OTUs), and synergistically inhibited AD process. Microbiological analysis revealed that the relative abundance of Clostridium and acetoclastic Methanosaeta was increased by 2.01 times and 2.17 times in single Nap treated group compared to control. With the simultaneous addition of NaCl and Nap, Proteiniphilum and hydrogenotrophic methanogens (Methanobacterium, Methanofollis, and Methanolinea) occupied the major abundance. Potential functions prediction indicated that high salinity could disrupt the co-metabolism between carbohydrate metabolism and Nap degradation. This study provides basis for anaerobic bioremediation of PAHs-polluted saline environment.
Collapse
Affiliation(s)
- Yongsen Shi
- School of Environmental Science and Engineering, China-America CRC for Environment & Health, Shandong University, 72#Jimo Binhai Road, Qingdao, Shandong Province, 266237, China
| | - Hongli Fang
- School of Environmental Science and Engineering, China-America CRC for Environment & Health, Shandong University, 72#Jimo Binhai Road, Qingdao, Shandong Province, 266237, China
| | - Yu-You Li
- Department of Civil and Environmental Engineering, Graduate School of Engineering, Tohoku University, 6-6-06 Aoba, Aramaki, Aoba-ku, Sendai, 980-8579, Japan
| | - Hanyang Wu
- Jiangxi Bocent Advanced Ceramic Environmental Technology Co., Ltd, Pingxiang, 337000, Jiangxi Province, China
| | - Rutao Liu
- School of Environmental Science and Engineering, China-America CRC for Environment & Health, Shandong University, 72#Jimo Binhai Road, Qingdao, Shandong Province, 266237, China
| | - Qigui Niu
- School of Environmental Science and Engineering, China-America CRC for Environment & Health, Shandong University, 72#Jimo Binhai Road, Qingdao, Shandong Province, 266237, China.
| |
Collapse
|
11
|
Abed RMM, Al-Fori M, Al-Sabahi J, Prigent S, Headley T. Impacts of partially hydrolyzed polyacrylamide (HPAM) on microbial mats from a constructed wetland treating oilfield produced water. CHEMOSPHERE 2021; 285:131421. [PMID: 34242985 DOI: 10.1016/j.chemosphere.2021.131421] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2021] [Revised: 06/01/2021] [Accepted: 06/30/2021] [Indexed: 06/13/2023]
Abstract
Constructed wetlands have been successfully used in the treatment of produced water brought to the surface in large quantities during oil extraction activities. However, with the increasing use of partially hydrolyzed polyacrylamide (HPAM) in enhancing oil recovery, the impacts of HPAM on the biological processes of wetlands is still unknown. Microbial mats in wetlands play a key role in hydrocarbon degradation. Here, we compared the bacterial communities of four wetland microbial mats after flooding with different concentrations of HPAM. Two mats (i.e. the HPAM-free and the 500 ppm HPAM pre-exposed mats) were selected to further investigate the effect of HPAM on respiration and biodegradation activities. The field mats exhibited clear differences in their bacterial community structure, where Cyanobacteria and Alphaproteobacteria became dominant in the presence of HPAM. In the laboratory experiments, the generated CO2 by the HPAM-free and the 500 ppm HPAM pre-exposed mats did not vary significantly when HPAM was added, although CO2 values were slightly higher in the presence of oil. Both mats were still able to degrade between 15 ± 14.4 to 50 ± 13.0% of C10 to C30 alkanes in 28 days, and this degradation was not affected by HPAM addition. The HPAM concentration decreased by 22-34% of the initial amount after 28 days of incubation in the HPAM-free mat, versus only 7-18.4% decrease in the 500 ppm HPAM pre-exposed mat. We conclude that the wetland microbial mats seem to have become well adapted to HPAM and could maintain their respiration and hydrocarbon degradation activities.
Collapse
Affiliation(s)
- Raeid M M Abed
- Biology Department, College of Science, Sultan Qaboos University, P. O. Box: 36, PC 123, Al Khoud, Oman.
| | - Marwan Al-Fori
- Biology Department, College of Science, Sultan Qaboos University, P. O. Box: 36, PC 123, Al Khoud, Oman
| | - Jamal Al-Sabahi
- Central Instrumentation Laboratory, College of Agricultural & Marine Sciences, Sultan Qaboos University, P. O. Box: 34, PC 123, Al Khoud, Oman
| | | | - Tom Headley
- BAUER Nimr LLC, P.O.Box 1186, P.C 114, Al Mina, Muscat, Oman
| |
Collapse
|
12
|
Zhou Z, Wang Y, Wang M, Zhou Z. Co-metabolic Effect of Glucose on Methane Production and Phenanthrene Removal in an Enriched Phenanthrene-Degrading Consortium Under Methanogenesis. Front Microbiol 2021; 12:749967. [PMID: 34712215 PMCID: PMC8546250 DOI: 10.3389/fmicb.2021.749967] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2021] [Accepted: 09/16/2021] [Indexed: 11/13/2022] Open
Abstract
Anaerobic digestion is used to treat diverse waste classes, and polycyclic aromatic hydrocarbons (PAHs) are a class of refractory compounds that common in wastes treated using anaerobic digestion. In this study, a microbial consortium with the ability to degrade phenanthrene under methanogenesis was enriched from paddy soil to investigate the cometabolic effect of glucose on methane (CH4) production and phenanthrene (a representative PAH) degradation under methanogenic conditions. The addition of glucose enhanced the CH4 production rate (from 0.37 to 2.25mg⋅L-1⋅d-1) but had no influence on the degradation rate of phenanthrene. Moreover, glucose addition significantly decreased the microbial α-diversity (from 2.59 to 1.30) of the enriched consortium but showed no significant effect on the microbial community (R 2=0.39, p=0.10), archaeal community (R 2=0.48, p=0.10), or functional profile (R 2=0.48, p=0.10). The relative abundance of genes involved in the degradation of aromatic compounds showed a decreasing tendency with the addition of glucose, whereas that of genes related to CH4 synthesis was not affected. Additionally, the abundance of genes related to the acetate pathway was the highest among the four types of CH4 synthesis pathways detected in the enriched consortium, which averagely accounted for 48.24% of the total CH4 synthesis pathway, indicating that the acetate pathway is dominant in this phenanthrene-degrading system during methanogenesis. Our results reveal that achieving an ideal effect is diffcult via co-metabolism in a single-stage digestion system of PAH under methanogenesis; thus, other anaerobic systems with higher PAH removal efficiency should be combined with methanogenic digestion, assembling a multistage pattern to enhance the PAH removal rate and CH4 production in anaerobic digestion.
Collapse
Affiliation(s)
- Ziyan Zhou
- College of Resources and Environment, Southwest University, Chongqing, China
| | - Yanqin Wang
- College of Resources and Environment, Southwest University, Chongqing, China
| | - Mingxia Wang
- College of Resources and Environment, Southwest University, Chongqing, China
| | - Zhifeng Zhou
- College of Resources and Environment, Southwest University, Chongqing, China
| |
Collapse
|
13
|
Abstract
Oil sands surface mining in Alberta has generated over a billion cubic metres of waste, known as tailings, consisting of sands, silts, clays, and process-affected water that contains toxic organic compounds and chemical constituents. All of these tailings will eventually be reclaimed and integrated into one of two types of mine closure landforms: end pit lakes (EPLs) or terrestrial landforms with a wetland feature. In EPLs, tailings deposits are capped with several metres of water while in terrestrial landforms, tailings are capped with solid materials, such as sand or overburden. Because tailings landforms are relatively new, past research has heavily focused on the geotechnical and biogeochemical characteristics of tailings in temporary storage ponds, referred to as tailings ponds. As such, the geochemical stability of tailings landforms remains largely unknown. This review discusses five mechanisms of geochemical change expected in tailings landforms: consolidation, chemical mass loading via pore water fluxes, biogeochemical cycling, polymer degradation, and surface water and groundwater interactions. Key considerations and knowledge gaps with regard to the long-term geochemical stability of tailings landforms are identified, including salt fluxes and subsequent water quality, bioremediation and biogenic greenhouse gas emissions, and the biogeochemical implications of various tailings treatment methods meant to improve geotechnical properties of tailings, such as flocculant (polyacrylamide) and coagulant (gypsum) addition.
Collapse
|
14
|
High temperature utilization of PAM and HPAM by microbial communities enriched from oilfield produced water and activated sludge. AMB Express 2019; 9:46. [PMID: 30968201 PMCID: PMC6456633 DOI: 10.1186/s13568-019-0766-9] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2019] [Accepted: 03/23/2019] [Indexed: 11/25/2022] Open
Abstract
Non-hydrolyzed polyacrylamide (PAM) and partially hydrolyzed polyacrylamide (HPAM) are commonly used polymers in various industrial applications, including in oil and gas production operations. Understanding the microbial utilization of such polymers can contribute to improved recovery processes and help to develop technologies for polymer remediation. Microbial communities enriched from oilfield produced water (PW) and activated sludge from Alberta, Canada were assessed for their ability to utilize PAM and HPAM as nitrogen and carbon sources at 50 °C. Microbial growth was determined by measuring CO2 production, and viscosity changes and amide concentrations were used to determine microbial utilization of the polymers. The highest CO2 production was observed in incubations wherein HPAM was added as a nitrogen source for sludge-derived enrichments. Our results showed that partial deamination of PAM and HPAM occurred in both PW and sludge microbial cultures after 34 days of incubation. Whereas viscosity changes were not observed in cultures when HPAM or PAM was provided as the only carbon source, sludge enrichment cultures amended with HPAM and glucose showed significant decreases in viscosity. 16S rRNA gene sequencing analysis indicated that microbial members from the family Xanthomonadaceae were enriched in both PW and sludge cultures amended with HPAM or PAM as a nitrogen source, suggesting the importance of this microbial taxon in the bio-utilization of these polymers. Overall, our results demonstrate that PAM and HPAM can serve as nitrogen sources for microbial communities under the thermophilic conditions commonly found in environments such as oil and gas reservoirs.
Collapse
|