Impact of additives of commercial rubber compounds on the microbial and enzymatic degradation of poly(cis-1,4-isoprene)

Assembly strategies for rubber-degrading microbial consortia based on omics tools

Numerous microorganisms, including bacteria and fungus, have been identified as capable of degrading rubber. Rubber biodegradation is still understudied due to its high stability and the lack of well-defined pathways and efficient enzymes involved in microorganism metabolism. However, rubber products manufacture and usage cause substantial environmental issues, and present physical-chemical methods involve dangerous chemical solvents, massive energy, and trash with health hazards. Eco-friendly solutions are required in this context, and biotechnological rubber treatment offers considerable promise. The structural and functional enzymes involved in poly (cis-1,4-isoprene) rubber and their cleavage mechanisms have been extensively studied. Similarly, novel bacterial strains capable of degrading polymers have been investigated. In contrast, relatively few studies have been conducted to establish natural rubber (NR) degrading bacterial consortia based on metagenomics, considering process optimization, cost effective approaches and larger scale experiments seeking practical and realistic applications. In light of the obstacles encountered during the constructing NR-degrading consortia, this study proposes the utilization of multi-omics tools to discern the underlying mechanisms and metabolites of rubber degradation, as well as associated enzymes and effective synthesized microbial consortia. In addition, the utilization of omics tool-based methods is suggested as a primary research direction for the development of synthesized microbial consortia in the future.

Enhanced Formation of 6PPD-Q during the Aging of Tire Wear Particles in Anaerobic Flooded Soils: The Role of Iron Reduction and Environmentally Persistent Free Radicals

Rapid urbanization drives increased emission of tire wear particles (TWPs) and the contamination of a transformation product derived from tire antioxidant, termed as N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-Q), with adverse implications for terrestrial ecosystems and human health. However, whether and how 6PPD-Q could be formed during the aging of TWPs in soils remains poorly understood. Here, we examine the accumulation and formation mechanisms of 6PPD-Q during the aging of TWPs in soils. Our results showed that biodegradation predominated the fate of 6PPD-Q in soils, whereas anaerobic flooded conditions were conducive to the 6PPD-Q formation and thus resulted in a ∼3.8-fold higher accumulation of 6PPD-Q in flooded soils than wet soils after aging of 60 days. The 6PPD-Q formation in flooded soils was enhanced by Fe reduction-coupled 6PPD oxidation in the first 30 days, while the transformation of TWP-harbored environmentally persistent free radicals (EPFRs) to superoxide radicals (O2•-) under anaerobic flooded conditions further dominated the formation of 6PPD-Q in the next 30 days. This study provides significant insight into understanding the aging behavior of TWPs and highlights an urgent need to assess the ecological risk of 6PPD-Q in soils.

Characterization of Latex-Clearing Protein and Aldehyde Dehydrogenases Involved in the Utilization of poly(cis-1,4-isoprene) by Nocardia farcinica NBRC 15532

Microbial degradation of natural rubber and synthetic poly(cis-1,4-isoprene) is expected to become an alternative treatment system for waste from poly(cis-1,4-isoprene) products including scrap tires. Nocardia farcinica NBRC 15,532, a gram-positive rubber-degrading bacterium, can utilize poly(cis-1,4-isoprene) as the sole source of carbon and energy to produce oligo-isoprene metabolites containing aldehyde and keto end groups. A homology-based search of the genome revealed a gene encoding a latex-clearing protein (Lcp). Gene disruption analysis indicated that this gene is essential for the utilization of poly(cis-1,4-isoprene) in this strain. Further analysis of the genome sequence identified aldehyde dehydrogenase (ALDH) genes as potential candidates for oxidative degradation of oligo-isoprene aldehydes. Based on the enzymatic activity of the ALDH candidates, NF2_RS14000 and NF2_RS14385 may be involved in the degradation of oligo-isoprene aldehydes. Analysis of the reaction products revealed that these ALDHs oxidized tri- to penta-isoprene aldehydes, which were generated by the reaction of Lcp. Based on the inability of ALDH gene deletion mutants, we concluded that NF2_RS14000 is mainly involved in the utilization of poly(cis-1,4-isoprene) and the oxidative degradation of oligo-isoprene aldehydes in Nocardia farcinica NBRC 15,532.

Aging of tire and road wear particles in terrestrial and freshwater environments - A review on processes, testing, analysis and impact

The environmental fate of tire and road wear particles (TRWPs) receives increasing attention due to the per capita emission volumes of 0.2-5.5 kg/(cap year) and recent reports on the environmental hazard of TRWP constituents. It is expected that aging impacts TRWPs fate in the environment but detailed knowledge is quite limited, yet. Making use of information on tire aging, the available knowledge on environmental aging processes such as thermooxidation, photooxidation, ozonolysis, shear stress, biodegradation and leaching is reviewed here. Experimental techniques to simulate aging are addressed as are analytical techniques to determine aging induced changes of TRWPs, covering physical and chemical properties. The suitability of various tire wear test materials is discussed. Findings and methods from tire aging can be partially applied to study aging of TRWPs in the environment. There is a complex interplay between aging processes in the environment that needs to be considered in future aging studies. In addition to existing basic qualitative understanding of the aging processes, quantitative understanding of TRWP aging is largely lacking. Aging in the environment needs to consider the TRWPs as well as chemicals released. Next steps for filling the gaps in knowledge on aging of TRWPs in the environment are elaborated.

Assessing the Biodegradation of Vulcanised Rubber Particles by Fungi Using Genetic, Molecular and Surface Analysis

Millions of tonnes of tyre waste are discarded annually and are considered one of the most difficult solid wastes to recycle. A sustainable alternative for the treatment of vulcanised rubber is the use of microorganisms that can biotransform polymers and aromatic compounds and then assimilate and mineralise some of the degradation products. However, vulcanised rubber materials present great resistance to biodegradation due to the presence of highly hydrophobic cross-linked structures that are provided by the additives they contain and the vulcanisation process itself. In this work, the biodegradation capabilities of 10 fungal strains cultivated in PDA and EM solid medium were studied over a period of 4 weeks. The growth of the strains, the mass loss of the vulcanised rubber particles and the surface structure were analysed after the incubation period. With the white rot fungi Trametes versicolor and Pleurotus ostreatus, biodegradation percentages of 7.5 and 6.1%, respectively, were achieved. The FTIR and SEM-EDS analyses confirmed a modification of the abundance of functional groups and elements arranged on the rubber surface, such as C, O, S, Si, and Zn, due to the biological treatment employed. The availability of genomic sequences of P. ostreatus and T. versicolor in public repositories allowed the analysis of the genetic content, genomic characteristics and specific components of both fungal species, determining some similarities between both species and their relationship with rubber biodegradation. Both fungi presented a higher number of sequences for laccases and manganese peroxidases, two extracellular enzymes responsible for many of the oxidative reactions reported in the literature. This was confirmed by measuring the laccase and peroxidase activity in cultures of T. versicolor and P. ostreatus with rubber particles, reaching between 2.8 and 3.3-times higher enzyme activity than in the absence of rubber. The integrative analysis of the results, supported by genetic and bioinformatics tools, allowed a deeper analysis of the biodegradation processes of vulcanised rubber. It is expected that this type of analysis can be used to find more efficient biotechnological solutions in the future.

Enzymatic and Chemical Approaches for Post-Polymerization Modifications of Diene Rubbers: Current state and Perspectives

Diene rubbers are polymeric materials which present elastic properties and have double bonds in the macromolecular backbone after the polymerization process. Post-polymerization modifications of rubbers can be conducted by enzymatic or chemical methods. Enzymes are environmentally friendly catalysts and with the increasing demand for rubber waste management, biodegradation and biomodifications have become hot topics of research. Some rubbers are renewable materials and are a source of organic molecules, and biodegradation can be conducted to obtain either oligomers or monomers. On the other hand, chemical modifications of rubbers by click-chemistry are important strategies for the creation and combination of new materials. In a way to expand the scope of uses to other non-traditional applications, several and effective modifications can be conducted with diene rubbers. Two groups of efficient tools, enzymatic, and chemical modifications in diene rubbers, are summarized in this review. By analyzing stereochemical and reactivity aspects, the authors also point to some applications perspectives for biodegradation products and to rational modifications of diene rubbers by combining both methodologies.

Organic Markers of Tire and Road Wear Particles in Sediments and Soils: Transformation Products of Major Antiozonants as Promising Candidates

Tire and road wear particles (TRWPs) are one of the main sources of particulate traffic emissions, but measured data on TRWP contents in the environment are scarce. This study aims at identifying organic compounds suitable as quantitative markers for TRWPs by a tiered multistep selection process involving nontarget screening and subsequent identification by liquid-chromatography high-resolution mass spectrometry. Starting from several thousands of signals recorded in the extract of tire particles, the rigorous selection process considered source specificity, tendency of leaching, analytical sensitivity and precision, and stability during aging. It led to three transformation products of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6-PPD) as the most suitable marker candidates: N-formyl-6-PPD, hydroxylated N-1,3-dimethylbutyl-N-phenyl quinone diimine, and 6-PPD-quinone. A linear response in standard addition experiments with tire particles and the correlation with TRWP contents in a diverse set of environmental samples imply that these compounds are promising candidates as markers for the quantification of TRWPs. Organic markers for TRWP contents in the environment would allow TRWP quantification with the traditional tandem MS (LC-MS/MS) equipment of an organic trace analytical laboratory and, thus, allow easy generation of data on TRWP occurrence in sediments and soils and other environmental matrices.

Microbial Degradation of Rubber: Actinobacteria

Rubber is an essential part of our daily lives with thousands of rubber-based products being made and used. Natural rubber undergoes chemical processes and structural modifications, while synthetic rubber, mainly synthetized from petroleum by-products are difficult to degrade safely and sustainably. The most prominent group of biological rubber degraders are Actinobacteria. Rubber degrading Actinobacteria contain rubber degrading genes or rubber oxygenase known as latex clearing protein (lcp). Rubber is a polymer consisting of isoprene, each containing one double bond. The degradation of rubber first takes place when lcp enzyme cleaves the isoprene double bond, breaking them down into the sole carbon and energy source to be utilized by the bacteria. Actinobacteria grow in diverse environments, and lcp gene containing strains have been detected from various sources including soil, water, human, animal, and plant samples. This review entails the occurrence, physiology, biochemistry, and molecular characteristics of Actinobacteria with respect to its rubber degrading ability, and discusses possible technological applications based on the activity of Actinobacteria for treating rubber waste in a more environmentally responsible manner.

In vitro studies on the degradation of common rubber waste material with the latex clearing protein (Lcp1VH2) of Gordonia polyisoprenivorans VH2

The enzymatic degradation of the rubber polymer poly(cis-1,4-isoprene), e.g. by the latex clearing protein Lcp1_VH2 of Gordonia polyisoprenivorans VH2 has been demonstrated with latex milk or pure isoprene-rubber particles, recently. Unfortunately, carbon black filled vulcanized rubber (CFVR) making the biggest part of worldwide rubber wastes, contains several harmful additives making microbial and enzymatic rubber degradation challenging. However, this study demonstrates the successful enzymatic cleavage of industrially produced CFVR. The formation of the cleavage products, oligo(cis-1,4-isoprenoids), from incubating CFVR particles with Lcp1_VH2 was detected by HPLC-MS. Various organic solvents were tested to remove harmful or inhibiting additives like antioxidants to enhance product formation. The pretreatment of CFVR particles, especially with chloroform or cyclohexane, significantly improved the degradation. It was also demonstrated that reducing the particles size and thus increasing the enzymatically accessible surface area of the particles led to a strong acceleration of the degradation process. Furthermore, ATR-IR analyses showed that Lcp1_VH2 led to the functionalization of the rubber particle surface with carbonyl groups by cleaving isoprene chains, still linked to the particle. Both, the oligo(cis-1,4-isoprenoids) as well as the functionalized rubber particles, are potentially important products, which can be reused as fine chemicals or as additives in rubber production. The present study, showing the enzymatic degradation of common CFVR for the first time, takes an important step towards a new way of rubber waste disposal and indicates the economic feasibility of an efficient and environmentally friendly recycling process by using the rubber oxygenase Lcp1_VH2.

Bacterial and enzymatic degradation of poly(cis-1,4-isoprene) rubber: Novel biotechnological applications

Poly(cis-1,4-isoprene) rubber is a highly demanded elastomeric material mainly used for the manufacturing of tires. The end-cycle of rubber-made products is creating serious environmental concern and, therefore, different recycling processes have been proposed. However, the current physical-chemical processes include the use of hazardous chemical solvents, large amounts of energy, and possibly generations of unhealthy micro-plastics. Under this scenario, eco-friendly alternatives are needed and biotechnological rubber treatments are demonstrating huge potential. The cleavage mechanisms and the biochemical pathways for the uptake of poly(cis-1,4-isoprene) rubber have been extensively reported. Likewise, novel bacterial strains able to degrade the polymer have been studied and the involved structural and functional enzymes have been analyzed. Considering the fundamentals, biotechnological approaches have been proposed considering process optimization, cost-effective methods and larger-scale experiments in the search for practical and realistic applications. In this work, the latest research in the rubber biodegradation field is shown and discussed, aiming to analyze the combination of detoxification, devulcanization and polymer-cleavage mechanisms to achieve better degradation yields. The modified superficial structure of rubber materials after biological treatments might be an interesting way to reuse old rubber for re-vulcanization or to find new materials.

High yield production of the latex clearing protein from Gordonia polyisoprenivorans VH2 in fed batch fermentations using a recombinant strain of Escherichia coli

The enzymatic degradation of rubber with the latex clearing protein (Lcp1_VH2) from Gordonia polyisoprenivorans VH2, is a promising option as an environmentally friendly and economical solution to treat the enormous amount of rubber waste. Here we present a fed batch fermentation process on a 10 L scale, using E.coli C41 pET23a(+)::Hislcp1_VH2 and a modified defined mineral salt medium, designed for high cell densities, for a proper synthesis of Lcp1_VH2. Particularly, providing complex media components, as well as hemin, as precursor of the essential heme b cofactor, resulted in a 2.9-fold higher yield of active Lcp1_VH2 with increased specific activity, due to a better occupancy of the enzyme with the cofactor. Based on this optimization, the fed batch fermentation with an initial glucose feed, followed by a lactose-glycerol feed, finally gained a cell dry weight of 60 g L^-1 and a yield of 223 mg L^-1 of soluble, active Lcp1_VH2. Compared to a recently published fermentation process, which used a complex auto-induction medium, we significantly increased the biomass up to nearly 10-fold and the total Lcp1_VH2 yield up to 3.7-fold. Thereby we reduced the costs for the medium by 75 %, taking the next step towards industrial production of rubber degrading enzymes.