Should Transformation Products Change the Way We Manage Chemicals?

When chemical pollutants enter the environment, they can undergo diverse transformation processes, forming a wide range of transformation products (TPs), some of them benign and others more harmful than their precursors. To date, the majority of TPs remain largely unrecognized and unregulated, particularly as TPs are generally not part of routine chemical risk or hazard assessment. Since many TPs formed from oxidative processes are more polar than their precursors, they may be especially relevant in the context of persistent, mobile, and toxic (PMT) and very persistent and very mobile (vPvM) substances, which are two new hazard classes that have recently been established on a European level. We highlight herein that as a result, TPs deserve more attention in research, chemicals regulation, and chemicals management. This perspective summarizes the main challenges preventing a better integration of TPs in these areas: (1) the lack of reliable high-throughput TP identification methods, (2) uncertainties in TP prediction, (3) inadequately considered TP formation during (advanced) water treatment, and (4) insufficient integration and harmonization of TPs in most regulatory frameworks. A way forward to tackle these challenges and integrate TPs into chemical management is proposed.

Sources of persistent and mobile chemicals in municipal wastewater: a sewer perspective in Leipzig, Germany

Persistent and mobile (PM) chemicals spread in the water cycle and have been widely detected, yet information about their sources is still scarce. In this study, 67 PM chemicals were analyzed in 19 wastewater samples taken in the sewer system of the city of Leipzig, Germany, covering different industrial, clinical, and domestic discharges. A total of 37 of these analytes could be detected, with highly variable median concentrations between substances (median: 0.5-800 µg L-1) and for single substances between samples (e.g., 1,4-diazabicyclo[2.2.2]octane) by up to three orders of magnitude, with the highest single concentration exceeding 10 mg L-1 (p-cumenesulfonic acid). The emission of PM chemicals into the sewer system was classified as stemming from diffuse (14 analytes) or point sources (23 analytes), while 9 analytes fulfill both criteria. Many so-called industrial chemicals were also discharged from households (e.g., tris(2-chloroethyl) phosphate or 1H-benzotriazole). Examples for analytes showing specific sources are tetrafluoroborate (traffic-related industry and metal production and finishing), ε-caprolactam (large-scale laundry), or cyanuric acid (likely swimming pool). Furthermore, a correlation between 1-cyanoguanidine and guanylurea was observed for the traffic-related industry. This study outlines that sewer sampling can provide valuable information on the sources of PM chemicals. This knowledge is a prerequisite for their future emission control at source or substitution as an alternative to end-of-pipe treatment in municipal wastewater treatment plants.

Leaching of tire particles and simultaneous biodegradation of leachables

The fate of organic compounds released from tire wear particle (TWP) in the aquatic environment is still poorly understood. This is especially true near sources where biotic and abiotic transformation and leaching from TWP are simultaneous and competing processes. To address this knowledge-gap an experiment was performed, allowing for biodegradation (a) during the leaching from a suspension of cryo-milled tire tread (CMTT) and (b) subsequent to leaching. Besides measuring the Dissolved Organic Carbon (DOC) content, 19 tire-related chemicals were quantified, and non-target screening was performed by LC-HRMS. The non-inoculated control experiment exhibited a DOC of up to 4 mg g-1, with up to 700 µg g-1 of 1,3-diphenylguanidine (DPG) as the most prominent compound, followed by three benzothiazoles (2-mercaptobenzothiazole (2-MBT), 2-hydroxybenzothiazole (2-OHBT) and benzothiazole-2-sulfonic acid (BTSA); 50 µg g-1 each) and 4-hydroxydiphenylamine (4-HDPA) (50 µg g-1). Biodegradation reduced the DOC by 88 % and the concentration of most organic compounds by more than 85 %. At the end of the experiment hexamethoxymethylmelamine (HMMM) was the most prominent single compounds (18 µg g-1). Non-target screening showed a more complex picture. Another 25 transformation products (TPs) of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6-PPD) and 44 TPs and derivatives related to DPG were detected in solution, of which 11 and 28 were still present after or formed by biodegradation, respectively. Of these 39 TPs and derivatives, 31 could be detected in road runoff samples. This study provides a more comprehensive picture of the leachables of tire particles that are of environmental relevance. It also outlines that derivatives of tire additives formed during tire production and use may deserve more attention as leachables. The large extent of biodegradation of tire leachables suggests that settling ponds may be a useful treatment option for road runoff.

Hotspots of Floating Plastic Particles across the North Pacific Ocean

The pollution of the marine environment with plastic debris is expected to increase, where ocean currents and winds cause their accumulation in convergence zones like the North Pacific Subtropical Gyre (NPSG). Surface-floating plastic (>330 μm) was collected in the North Pacific Ocean between Vancouver (Canada) and Singapore using a neuston catamaran and identified by Fourier-transform infrared spectroscopy (FT-IR). Baseline concentrations of 41,600-102,700 items km-2 were found, dominated by polyethylene and polypropylene. Higher concentrations (factors 4-10) of plastic items occurred not only in the NPSG (452,800 items km-2) but also in a second area, the Papaha̅naumokua̅kea Marine National Monument (PMNM, 285,200 items km-2). This second maximum was neither reported previously nor predicted by the applied ocean current model. Visual observations of floating debris (>5 cm; 8-2565 items km-2 and 34-4941 items km-2 including smaller "white bits") yielded similar patterns of baseline pollution (34-3265 items km-2) and elevated concentrations of plastic debris in the NPSG (67-4941 items km-2) and the PMNM (295-3748 items km-2). These findings suggest that ocean currents are not the only factor provoking plastic debris accumulation in the ocean. Visual observations may be useful to increase our knowledge of large-scale (micro)plastic pollution in the global oceans.

Abundance and distribution of tire and road wear particles in the Seine River, France

Tire and road wear particles (TRWP) are formed at the frictional interface between tires and the road surface. Tire tread and road pavement materials are denser than water but can be washed from the road surface into receiving water bodies, ultimately depositing into sediment, soil, or other media depending on the receiving environment. However, the paucity of mass-based measurements has limited the knowledge on the nature and extent of environmental concentrations necessary for environmental risk assessment of TRWP. Surface water and sediment samples were collected from the Seine River, France to characterize TRWP concentration. Sample locations were established upstream, within, and downstream of a major metropolitan area (Paris); downstream of smaller urban areas; adjacent to undeveloped land; and near the confluence of the estuary. Surface water and sediment were collected from the left and right banks at each of the eight locations, including two duplicates, for a total of 18 samples. Additionally, three sediment traps were deployed near the mouth of the river to quantify the flux of TRWP to sediment. Retained solids and sediment samples were analyzed using a modified pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) method that minimized the matrix interferences in the samples thus improving the current ISO Technical Specification ISO/TS 21396 : 2017 for TRWP mass concentration by Py-GC/MS. TRWP concentration was alternatively estimated by separating the sediment into the <1.9 g cm-3 fraction and analyzing for tread-derived zinc content. TRWP concentrations estimated by zinc method were significantly higher than results from the modified Py-GC/MS method. TRWP and total zinc concentrations show a decreasing trend from available historical data.

Influence of Silver Fiber Morphology on the Dose-Response Relationship and Enrichment in Daphnia magna Studied by Elemental Imaging with LA-ICP-TOF-MS

This study aims to enhance the understanding of the environmental risks associated with nanomaterials, particularly nanofibers. Previous research suggested that silver fibers exhibit higher toxicity (EC50/48h 1.6-8.5 μg/L) compared to spherical silver particles (EC50/48h 43 μg/L). To investigate the hypothesis that toxicity is influenced by the morphology and size of nanomaterials, various silver nanofibers with different dimensions (length and diameter) were selected. The study assessed their toxicity toward Daphnia magna using the 48 h immobilization assay. The EC50 values for the different fibers ranged from 122 to 614 μg/L. Subsequently, the study quantified the uptake and distribution of two representative nanofibers in D. magna neonates by employing digestion and imaging mass spectrometry in the form of laser-ablation-ICP-MS. A novel sample preparation method was utilized, allowing the analysis of whole, intact daphnids, which facilitated the localization of silver material and prevented artifacts. The results revealed that, despite the similar ecotoxicity of the silver fibers, the amount of silver associated with the neonates differed by a factor of 2-3. However, both types of nanofibers were primarily found in the gut of the organisms. In conclusion, the findings of this study do not support the expectation that the morphology or size of silver materials affect their toxicity to D. magna.

Accelerated aging of tire and road wear particles by elevated temperature, artificial sunlight and mechanical stress - A laboratory study on particle properties, extractables and leachables

Tire and road wear particles (TRWP) are generated in large quantity by automobile traffic on roads but their way of degradation in the environment is largely unclear. Laboratory experiments were performed on the effect of elevated temperature (simulating 2-3 years), sunlight exposure (simulating 0.5 years) and mechanical stress on the physical properties and chemical composition of TRWP and of cryo-milled tire tread (CMTT). No significant effects were observed of the applied mechanical stress on mean properties of pristine particles. After sunlight exposure up to 40 % in mass were lost from the TRWP, likely due to the loss of mineral incrustations from their surface. The chemical composition of TRWP and CMTT was characterized by determining 27 compounds, antioxidants (phenylene diamines), vulcanization agents (benzothiazoles and guanidines) and their transformation products (TPs). Extractables of TRWP (580-850 μg/g) were dominated by TPs, namely benzothiazolesulfonic acid (BTSA). CMTT showed much higher amounts of extractables (4600 μg/g) which were dominated by parent chemicals such as N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine (6-PPD), diphenylguanidine (DPG) and mercaptobenzothiazole (MBT). Sunlight exposure affected the amount of extractables more strongly than elevated temperature, for TRWP (-45 % vs -20 %) and CMTT (-80 % vs -25 %) and provoked a clear shift from parent compounds to their TPs. After sunlight exposure extractables of TRWP were dominated by BTSA and DPG. Sunlight exposure drastically reduced the 6-PPD amount extracted from both, TRWP and CMTT (-93 %, -98 %), while its quinone (6-PPDQ) increased by around 1 % of the 6-PPD decrease, only. For many TPs, concentration in leachates were higher than in extracts, indicating ongoing transformation of their parent compounds during leaching. These results highlight that abiotic aging of TRWP leads to strong changes in their chemical composition which affect their particle properties and are of relevance for the environmental exposure to tire-related chemicals.

Uptake and Biotransformation of the Tire Rubber-derived Contaminants 6-PPD and 6-PPD Quinone in the Zebrafish Embryo (Danio rerio)

N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine (6-PPD) is a widely used antioxidant in tire rubber known to enter the aquatic environment via road runoff. The associated transformation product (TP) 6-PPD quinone (6-PPDQ) causes extreme acute toxicity in some fish species (e.g., coho salmon). To interpret the species-specific toxicity, information about biotransformation products of 6-PPDQ would be relevant. This study investigated toxicokinetics of 6-PPD and 6-PPDQ in the zebrafish embryo (ZFE) model. Over 96 h of exposure, 6-PPD and 6-PPDQ accumulated in the ZFE with concentration factors ranging from 140 to 2500 for 6-PPD and 70 to 220 for 6-PPDQ. A total of 22 TPs of 6-PPD and 12 TPs of 6-PPDQ were tentatively identified using liquid chromatography coupled to high-resolution mass spectrometry. After 96 h of exposure to 6-PPD, the TPs of 6-PPD comprised 47% of the total peak area (TPA), with 4-hydroxydiphenylamine being the most prominent in the ZFE. Upon 6-PPDQ exposure, >95% of 6-PPDQ taken up in the ZFE was biotransformed, with 6-PPDQ + O + glucuronide dominating (>80% of the TPA). Among other TPs of 6-PPD, a reactive N-phenyl-p-benzoquinone imine was found. The knowledge of TPs of 6-PPD and 6-PPDQ from this study may support biotransformation studies in other organisms.

Recently evolved combination of unique sulfatase and amidase genes enables bacterial degradation of the wastewater micropollutant acesulfame worldwide

Xenobiotics often challenge the principle of microbial infallibility. One example is acesulfame introduced in the 1980s as zero-calorie sweetener, which was recalcitrant in wastewater treatment plants until the early 2010s. Then, efficient removal has been reported with increasing frequency. By studying acesulfame metabolism in alphaproteobacterial degraders of the genera Bosea and Chelatococcus, we experimentally confirmed the previously postulated route of two subsequent hydrolysis steps via acetoacetamide-N-sulfonate (ANSA) to acetoacetate and sulfamate. Genome comparison of wildtype Bosea sp. 100-5 and an acesulfame degradation-defective mutant revealed the involvement of two plasmid-borne gene clusters. The acesulfame-hydrolyzing sulfatase is strictly manganese-dependent and belongs to the metallo beta-lactamase family. In all degraders analyzed, it is encoded on a highly conserved gene cluster embedded in a composite transposon. The ANSA amidase, on the other hand, is an amidase signature domain enzyme encoded in another gene cluster showing variable length among degrading strains. Transposition of the sulfatase gene cluster between chromosome and plasmid explains how the two catabolic gene clusters recently combined for the degradation of acesulfame. Searching available genomes and metagenomes for the two hydrolases and associated genes indicates that the acesulfame plasmid evolved and spread worldwide in short time. While the sulfatase is unprecedented and unique for acesulfame degraders, the amidase occurs in different genetic environments and likely evolved for the degradation of other substrates. Evolution of the acesulfame degradation pathway might have been supported by the presence of structurally related natural and anthropogenic compounds, such as aminoacyl sulfamate ribonucleotide or sulfonamide antibiotics.

Differences in the internal PFAS patterns of herbivores, omnivores and carnivores - lessons learned from target screening and the total oxidizable precursor assay

Per- and polyfluorinated alkyl substances (PFAS) are a group of anthropogenic chemicals, which are not (fully) biodegradable and accumulate in different environmental compartments worldwide. A comprehensive, quantitative analysis - consisting of target analysis (66 different analytes, including e. g. ultrashort-chain perfluorinated carboxylic acids (PFCAs), precursor compounds and novel substitutes) and the Total Oxidisable Precursor (TOP) assay (including trifluoroacetic acid (TFA)) - were conducted to analyse the PFAS concentrations and patterns in 12 mammalian and two bird species from different areas of Germany and Denmark. The PFAS contamination was investigated in dependance of the trophic class (herbivores, omnivores, carnivores), ecological habitat (terrestrial, (semi-) aquatic) and body tissue (liver, musculature). PFAS concentrations were highest in carnivores, followed by omnivores and herbivores, with ∑PFAS concentration ranging from 1274 μg/kg (Eurasian otter liver) to 22 μg/kg (roe deer liver). TFA dominated in the herbivorous species, whereas perfluorooctanesulfonic acid (PFOS) and the long-chain PFCAs covered the majority of the PFAS contamination in carnivorous species. Besides trophic class, ecological habitat also affected the PFAS levels in the different species, with terrestrial herbivores and omnivores showing higher PFAS concentration than their aquatic counterparts, whereas for carnivores this relationship was reversed. The TOP assay analysis indicated similar trends, with the PFCA formation pattern differing significantly between the trophic classes. TFA was formed predominantly in herbivorous and omnivorous species, whereas in carnivorous species a broad spectrum of PFCAs (chain-length C2-C14) was formed. Musculature tissue of six species exhibited significantly lower PFAS concentrations than the respective liver tissue, but with similar PFAS patterns. The comprehensive approach applied in the present study showed, that primarily the trophic class is decisive for the PFAS concentration, as herbivores, omnivores and carnivores clearly differed in their PFAS concentrations and patterns. Additionally, the TOP assay gave novel insights in the PFCA formation potential in biota samples.

The Precision Toxicology Initiative

The goal of PrecisionTox is to overcome conceptual barriers to replacing traditional mammalian chemical safety testing by accelerating the discovery of evolutionarily conserved toxicity pathways that are shared by descent among humans and more distantly related animals. An international consortium is systematically testing the toxicological effects of a diverse set of chemicals on a suite of five model species comprising fruit flies, nematodes, water fleas, and embryos of clawed frogs and zebrafish along with human cell lines. Multiple forms of omics and comparative toxicology data are integrated to map the evolutionary origins of biomolecular interactions, which are predictive of adverse health effects, to major branches of the animal phylogeny. These conserved elements of adverse outcome pathways (AOPs) and their biomarkers are expect to provide mechanistic insight useful for regulating groups of chemicals based on their shared modes of action. PrecisionTox also aims to quantify risk variation within populations by recognizing susceptibility as a heritable trait that varies with genetic diversity. This initiative incorporates legal experts and collaborates with risk managers to address specific needs within European chemicals legislation, including the uptake of new approach methodologies (NAMs) for setting precise regulatory limits on toxic chemicals.

Is adsorption onto activated carbon a feasible drinking water treatment option for persistent and mobile substances?

Persistent and mobile (PM) substances among the organic micropollutants have gained increasing interest since their inherent properties enable them to enrich in water cycles. This study set out to investigate the potential of adsorption onto activated carbon as a drinking water treatment option for 19 PM candidates in batch experiments in a drinking water matrix using a microporous and a mesoporous activated carbon. Overall, adsorption of PM candidates proved to be very variable and the extent of removal could not be directly related to molecular properties. At an activated carbon dose of 10 mg/L and 48 h contact time, five (out of 19) substances were readily removed (≥ 80%), among them N-(3-(dimethylamino)-propyl)methacrylamide, which was investigated for the first time. For five other substances, no or negligible removal (< 20%) was observed, including 2-methyl-2-propene-1-sulfonic acid and 4‑hydroxy-1-(2-hydroxyethyl)-2,2,6,6,-tetramethylpiperidine. For the former, current state of the art adsorption processes may pose a sufficient barrier. Additionally, substance specific surrogate correlations between removals and UVA₂₅₄ abatements were established to provide a cheap and fast estimate for PM candidate elimination. Adsorption onto activated carbon could contribute significantly to PM substance elimination as part of multi barrier approaches, but assessments for individual substances still require clarification, as demonstrated for the investigated PM candidates.

Advanced oxidation processes for removal of monocyclic aromatic hydrocarbon from water: Effects of O3/H2O2 and UV/H2O2 treatment on product formation and biological post-treatment

Several oxidative treatment technologies, such as ozonation or Fenton reaction, have been studied and applied to remove monocyclic hydroaromatic carbon from water. Despite decades of application, little seems to be known about formation of transformation products while employing different ozone- or ^∙OH-based treatment methods and their fate in biodegradation. In this study, we demonstrate that O₃/H₂O₂ treatment of benzene, toluene, ethylbenzene (BTE), and benzoic acid (BA) leads to less hydroxylated aromatic transformation products compared to UV/H₂O₂ as reference system - this at a similar ^∙OH exposure and parent compound removal efficiency. Aerobic biodegradation tests after oxidation of 0.15 mM BA (12.6 mg C L^-1 theoretical DOC) revealed that a less biodegradable DOC fraction > 4 mg C L^-1 was formed in both oxidative treatments compared to the BA control. No advantage of ozonation over UV/H₂O₂ treatment was observed in terms of mineralization capabilities, however, we detected less transformation products after oxidation and biodegradation using high-resolution mass spectrometry. Biodegradation of BA that was not oxidized was more complete with minimal organic residual. Overall, the study provides new insights into the oxidation of monocyclic aromatics and raises questions regarding the biodegradability of oxidation products, which is relevant for several treatment applications.

Efficacy of activated carbon filtration and ozonation to remove persistent and mobile substances - A case study in two wastewater treatment plants

Persistent and mobile (PM) substances are able to spread quickly in the water cycle and were thus identified as potentially problematic for the environment and water quality. If also toxic (PMT) or very persistent and very mobile (vPvM) their regulation under REACH as substances of very high concern is foreseen. Yet, knowledge on the effectiveness of advanced wastewater treatment in removing PM-substances from WWTP effluents is limited to few rather well-known chemicals. The occurrence and behavior of 111 suspected and known PM-substances was investigated in two wastewater treatment plants employing either powdered activated carbon (PAC, full-scale) or ozonation with subsequent sand/anthracite filtration (pilot-scale) and an additional granular activated carbon (GAC) filtration was investigated. 72 of the 111 PM-substances analyzed were detected at least once in the secondary effluent of either wastewater treatment plant, resulting in total concentrations of 104 μg/L and 40 μg/L, respectively. While PAC removed 32 % of PM-substances well, the total PM burden in the effluent was only reduced from 103 μg/L to 87 μg/L. Ozonation and the subsequent sand/anthracite filtration was able to reduce the PM burden in wastewater from 40 μg/L to 19 μg/L, showing a higher removal efficacy than PAC in this study. The additional GAC filtration further reduced the total PM-concentration to 13 μg/L. Among the investigated PM-chemicals detected were constituents of ionic liquids: The anion hexafluorophosphate was one of few chemicals that was detected in effluent concentrations >1 μg/L and could not be removed by the processes studied, showing that for some chemicals preventive actions may be required.

Comprehensive target analysis and TOP assay of per- and polyfluoroalkyl substances (PFAS) in wild boar livers indicate contamination hot-spots in the environment

The suitability of wild boar liver as a bioindicator of per- and polyfluoroalkyl substances (PFAS) in the terrestrial environment was investigated. Samples from 50 animals in three different areas associated with (1) contaminated paper sludges distributed on arable land (PS), (2) industrial emissions of PFAS (IE) and (3) background contamination (BC) were analyzed for 66 PFAS, including legacy PFAS, novel substitutes and precursors of perfluoroalkyl acids (PFAAs). Additionally, the Total Oxidizable Precursor (TOP) assay was performed to determine the formation potential of PFAAs from precursors. In total, 31 PFAS were detected with site-specific contamination profiles. PFAS concentrations in livers from area PS and IE (567 and 944 μg kg^-1 wet weight, respectively) were multiple times higher than from area BC (120 μg kg^-1). The dominating PFAS were the legacy compounds perfluorooctane sulfonic acid (PFOS) in areas PS and BC (426 and 82 μg kg^-1, respectively) and perfluorooctanoic acid (PFOA) in area IE (650 μg kg^-1). In area IE, the compounds 4,8-dioxa-3H-perfluorononanoic acid (DONA) and hexafluoropropylene oxide dimer acid (HFPO-DA) - which are used as substitutes for PFOA - were determined at 15 and 0.29 μg kg^-1, respectively. The formation potential of PFAAs was highest in area PS, but generally lower than the contamination with PFAAs. The pattern of perfluoroalkyl carboxylic acids (PFCAs) in wild boar liver reflects the contamination of the local soil at the two hot-spot areas IE and PS. This first comparison of PFAS contamination between wild boars and soil suggests that wild boar livers are suitable bioindicators for PFAS contamination in the terrestrial environment. Moreover, in terrestrial samples from area IE, legacy PFAS were found to be retained for a longer period as compared to riverine samples (suspended particulate matter and chub filet).

Pilot-scale removal of persistent and mobile organic substances in granular activated carbon filters and experimental predictability at lab-scale

Present knowledge about the fate of persistent and mobile (PM) substances in drinking water treatment is limited. Hence, this study assesses the potential of fixed-bed granular activated carbon (GAC) filters to fill the treatment gap for PM substances and the elimination predictability from lab-scale experiments. Two parallel pilot filters (GAC bed height 2 m, diameter 15 cm) with different GAC were operated for 1.5 years (ca. 47,000 BV throughput) alongside rapid small-scale column tests (RSSCT) designed based on the proportional diffusivity (PD) and the constant diffusivity (CD) approaches. Background dissolved organic matter (DOM) and a set of 17 target substances were investigated, among them 2-acrylamido-2-methylpropane sulfonate (AAMPS), adamantan-1-amine (ATA), melamine (MEL) and trifluoromethanesulfonic acid (TFMSA). Nine substances were predominantly present in the drinking water used as pilot filter influent (frequencies of detection above 80 %, median concentrations 0.003-1.868 μg/L) and their breakthrough behaviors could be observed: TFMSA was not retained at all, four substances including AAMPS and ATA reached complete breakthrough below 20,000 BV, three compounds were partially retained until the end of operation and oxypurinol was retained completely. The comparable PM candidate and DOM removal performances of both GAC aligns with their very similar surface characteristics and elemental compositions. The agreement of results between RSSCT with the pilot-scale filters were substance specific and no superior RSSCT design could be identified. However, CD-RSSCT provide a conservative removal prediction for most studied compounds. MEL adsorption was significantly underestimated by both RSSCT designs. Using the criterion of a carbon usage rate (with respect to 50 % breakthrough) below 25 mg_GAC/L_water for an economic retention by fixed-bed GAC filters, five (out of nine) substances met the requirement.

Isotopically labeled ozone: A new approach to elucidate the formation of ozonation products

As ozonation becomes a widespread treatment for removal of chemicals of emerging concern from wastewater treatment plant effluents, there are increasing concerns regarding the formation of ozonation products (OPs), and their possible impacts on the aquatic environment and eventually human health. In this study, a novel method was developed that utilizes heavy oxygen (¹⁸O₂) for the production of heavy ozone ([¹⁸O₁]O₂, [¹⁸O₂]O₁, [¹⁸O₃]) to actively label OPs from oxygen transfer reactions. To establish and validate this new approach, venlafaxine with a well-described oxygen transfer reaction (tertiary amine -> N-oxide) was chosen as a model compound. Observed ¹⁸O/¹⁶O ratios in the major OP venlafaxine N-oxide (NOV) correlated with expected ¹⁸O purities based on tracer experiments. These results confirmed the successful labeling with heavy oxygen and furthermore demonstrate the potential to monitor NOV as an indicator of ¹⁸O/¹⁶O ratios during ozonation. As a next step, ¹⁸O/¹⁶O ratios were used to elucidate the formation mechanism of previously described OPs from sulfamethoxazole (SMX). Seven OPs were detected including the frequently described nitro-SMX, which was formed with a maximum yield of 3.2% (of initial SMX). With the successful labeling of six of the seven OPs from sulfamethoxazole, it was possible to confirm their previously proposed formation pathways, and to distinguish oxygen transfer from electron transfer reactions. ¹⁸O/¹⁶O ratios in OPs indicate that hydroxylation of the aromatic ring and formation of nitro-groups mostly follows oxygen transfer reactions, while electron transfer reactions initiate the formation of hydroxylamine and the abstraction of NH₂ leading to catechol.

Revisiting Disinfection Byproducts with Supercritical Fluid Chromatography-High Resolution-Mass Spectrometry: Identification of Novel Halogenated Sulfonic Acids in Disinfected Drinking Water

High resolution mass spectrometry (HRMS) coupled to either gas chromatography or reversed-phase liquid chromatography is the generic method to identify unknown disinfection byproducts (DBPs) but can easily overlook their highly polar fractions. In this study, we applied an alternative chromatographic separation method, supercritical fluid chromatography-HRMS, to characterize DBPs in disinfected water. In total, 15 DBPs were tentatively identified for the first time as haloacetonitrilesulfonic acids, haloacetamidesulfonic acids, and haloacetaldehydesulfonic acids. Cysteine, glutathione, and p-phenolsulfonic acid were found as precursors during lab-scale chlorination, with cysteine providing the highest yield. A mixture of the labeled analogues of these DBPs was prepared by chlorination of ¹³C₃-¹⁵N-cysteine and analyzed using nuclear magnetic resonance spectroscopy for structural confirmation and quantification. A total of 6 drinking water treatment plants utilizing various source waters and treatment trains produced sulfonated DBPs upon disinfection. Those were widespread in the tap water of 8 cities across Europe, with estimated concentrations up to 50 and 800 ng/L for total haloacetonitrilesulfonic acids and haloacetaldehydesulfonic acids, respectively. Up to 850 ng/L haloacetonitrilesulfonic acids were found in 3 public swimming pools. Considering the stronger toxicity of haloacetonitriles, haloacetamides, and haloacetaldehydes than the regulated DBPs, these newly found sulfonic acid derivatives may also pose a health risk.

The effect of root hairs on exudate composition: a comparative non-targeted metabolomics approach

Root exudation is a major pathway of organic carbon input into soils. It affects soil physical properties, element solubility as well as speciation, and impacts the microbial community in the rhizosphere. Root exudates contain a large number of primary and secondary plant metabolites, and the amount and composition are highly variable depending on plant species and developmental stage. Detailed information about exudate composition will allow for a better understanding of exudate-driven rhizosphere processes and their feedback loops. Although non-targeted metabolomics by high-resolution mass spectrometry is an established tool to characterize root exudate composition, the extent and depth of the information obtained depends strongly on the analytical approach applied. Here, two genotypes of Zea mays L., differing in root hair development, were used to compare six mass spectrometric approaches for the analysis of root exudates. Reversed-phase liquid chromatography and hydrophilic interaction liquid chromatography combined with time-of-flight mass spectrometry (LC-TOF-MS), as well as direct infusion Fourier-transform ion cyclotron resonance mass spectrometry (DI-FT-ICR-MS), were applied with positive and negative ionization mode. By using the same statistical workflow, the six approaches resulted in different numbers of detected molecular features, ranging from 176 to 889, with a fraction of 48 to 69% of significant features (fold change between the two genotypes of > 2 and p-value < 0.05). All approaches revealed the same trend between genotypes, namely up-regulation of most metabolites in the root hair defective mutant (rth3). These results were in agreement with the higher total carbon and nitrogen exudation rate of the rth3-mutant as compared to the corresponding wild-type maize (WT). However, only a small fraction of features were commonly found across the different analytical approaches (20-79 features, 13-31% of the rth3-mutant up-regulated molecular formulas), highlighting the need for different mass spectrometric approaches to obtain a more comprehensive view into the composition of root exudates. In summary, 111 rth3-mutant up-regulated compounds (92 different molecular formulas) were detected with at least two different analytical approaches, while no WT up-regulated compound was found by both, LC-TOF-MS and DI-FT-ICR-MS. Zea mays L. exudate features obtained with multiple analytical approaches in our study were matched against the metabolome database of Zea mays L. (KEGG) and revealed 49 putative metabolites based on their molecular formula.

Stable isotope labeling for detection of ozonation byproducts in effluent organic matter with FT-ICR-MS

Despite effluent organic matter (EfOM) being a major consumer of ozone during wastewater treatment, little is known about ozonation byproducts (OBPs) produced from EfOM. To unambiguously identify OBPs, heavy ozone was used to ozonate EfOM, resulting in ¹⁸O labeled and unlabeled OBPs. Labeled OBPs mostly represent a single ¹⁸O transfer and were classified as either direct or indirect OBPs based on the ¹⁸O/¹⁶O intensity ratios of the isotopologues. Of the 929 labeled OBPs, 84 were unequivocally classified as direct OBPs. The remainder suggest a major contribution by indirect, hydroxyl radical induced formation of OBPs in EfOM. Overall, labelled OBPs possess a low degree of unsaturation and contributed most to OBP peak intensity - marking them as potential end products. A few direct and indirect OBPs with high peak intensity containing ¹⁸O and heteroatoms (N, S) were fragmented with CID FT-ICR-MS/MS and screened for indicative neutral losses carrying heavy oxygen. The neutral loss screening was used to detect the ¹⁸O location on the OBP and indicate the original functional group in EfOM based on known reaction mechanisms. We identified sulfoxide and sulfonic acid functional groups in selected OBPs - implying the presence of reduced sulfur in EfOM molecules - while no evidence for nitrogen containing functional groups reacting with ozone was found.

Combining target analysis with sum parameters-a comprehensive approach to determine sediment contamination with PFAS and further fluorinated substances

Recent studies aiming at a fluorine mass balance analysis in sediments combined the determination of extractable organic fluorine (EOF) with target analysis. They reported high fractions of unidentified organic fluorine (UOF) compounds, as the target analysis covers only a limited number of per- and polyfluoroalkyl substances (PFAS). For this reason, in this study, a comprehensive approach was used combining target analysis with an extended PFAS spectrum, the EOF and a modified total oxidisable precursor (TOP) assay, which includes trifluoroacetic acid, to determine the PFAS contamination in sediments (n=41) and suspended solids (n=1) from water bodies in Northern Germany (Lower Saxony). PFAS are ubiquitous in the sediments (detected in 83% of the samples). Perfluorinated carboxylic acids (PFCAs) were found in 64% of the samples; perfluorinated sulfonic acids (PFSAs) were detected less frequently (21%), with the highest concentration observed for perfluorooctanesulfonic acid (PFOS). Levels of precursors and substitutes were lower. Applying the TOP assay resulted in an increase in PFCAs in 43% of the samples analysed. In most cases, target analysis and the TOP assay could not account for the EOF concentrations measured. However, as the fraction of UOF decreased significantly, the application of the TOP assay in fluorine mass balance analysis proved to be an important tool in characterising the PFAS contamination of riverine sediments.

The NORMAN Suspect List Exchange (NORMAN-SLE): facilitating European and worldwide collaboration on suspect screening in high resolution mass spectrometry

Background

The NORMAN Association (https://www.norman-network.com/) initiated the NORMAN Suspect List Exchange (NORMAN-SLE; https://www.norman-network.com/nds/SLE/) in 2015, following the NORMAN collaborative trial on non-target screening of environmental water samples by mass spectrometry. Since then, this exchange of information on chemicals that are expected to occur in the environment, along with the accompanying expert knowledge and references, has become a valuable knowledge base for "suspect screening" lists. The NORMAN-SLE now serves as a FAIR (Findable, Accessible, Interoperable, Reusable) chemical information resource worldwide.

Results

The NORMAN-SLE contains 99 separate suspect list collections (as of May 2022) from over 70 contributors around the world, totalling over 100,000 unique substances. The substance classes include per- and polyfluoroalkyl substances (PFAS), pharmaceuticals, pesticides, natural toxins, high production volume substances covered under the European REACH regulation (EC: 1272/2008), priority contaminants of emerging concern (CECs) and regulatory lists from NORMAN partners. Several lists focus on transformation products (TPs) and complex features detected in the environment with various levels of provenance and structural information. Each list is available for separate download. The merged, curated collection is also available as the NORMAN Substance Database (NORMAN SusDat). Both the NORMAN-SLE and NORMAN SusDat are integrated within the NORMAN Database System (NDS). The individual NORMAN-SLE lists receive digital object identifiers (DOIs) and traceable versioning via a Zenodo community (https://zenodo.org/communities/norman-sle), with a total of > 40,000 unique views, > 50,000 unique downloads and 40 citations (May 2022). NORMAN-SLE content is progressively integrated into large open chemical databases such as PubChem (https://pubchem.ncbi.nlm.nih.gov/) and the US EPA's CompTox Chemicals Dashboard (https://comptox.epa.gov/dashboard/), enabling further access to these lists, along with the additional functionality and calculated properties these resources offer. PubChem has also integrated significant annotation content from the NORMAN-SLE, including a classification browser (https://pubchem.ncbi.nlm.nih.gov/classification/#hid=101).

Conclusions

The NORMAN-SLE offers a specialized service for hosting suspect screening lists of relevance for the environmental community in an open, FAIR manner that allows integration with other major chemical resources. These efforts foster the exchange of information between scientists and regulators, supporting the paradigm shift to the "one substance, one assessment" approach. New submissions are welcome via the contacts provided on the NORMAN-SLE website (https://www.norman-network.com/nds/SLE/).

Supplementary Information

The online version contains supplementary material available at 10.1186/s12302-022-00680-6.

Potential propagation of agricultural pesticide exposure and effects to upstream sections in a biosphere reserve

In the last decades, several studies have shown that pesticides frequently occur above water quality thresholds in small streams draining arable land and are associated with changes in invertebrate communities. However, we know little about the potential propagation of pesticide effects from agricultural stream sections to least impacted stream sections that can serve as refuge areas. We sampled invertebrates and pesticides along six small streams in south-west Germany. In each stream, the sampling was conducted at an agricultural site, at an upstream forest site (later considered as "refuge"), and at a transition zone between forest and agriculture (later considered as "edge"). Pesticide exposure was higher and the proportion of pesticide-sensitive species (SPEAR_pesticides) was lower in agricultural sites compared to edge and refuge sites. Notwithstanding, at some edge and refuge sites, which were considered as being least impacted, we estimated unexpected pesticide toxicity (sum toxic units) exceeding thresholds at which field studies suggested adverse effects on freshwater invertebrates. We conclude that organisms in forest sections within a few kilometres upstream of agricultural areas can be exposed to ecologically relevant pesticide levels. In addition, although not statistically significant, the abundance of pesticide-sensitive taxa was slightly lower in edge compared to refuge sites, indicating a potential influence of adjacent agriculture. Future studies should further investigate the influence of spatial relationships, such as the distance between refuge and agriculture, for the propagation of pesticide effects and focus on the underlying mechanisms.

Impact of various aeration strategies on the removal of micropollutants and biological effects in aerated horizontal flow treatment wetlands

Two aerated horizontal subsurface flow treatment wetlands were studied over two years for the removal efficacy with respect of conventional wastewater parameters, micropollutants and effect-based methods. One wetland served as control and was aerated 24 h d^-1 across 100% of the fractional length of the system. The second aerated horizontal flow treatment wetland was investigated under several aeration modes: first year with a zone of 85% aeration, followed by five months with a zone of 50% aeration and six months with a zone of 35% aeration. With 85% aeration, no significant difference in the removal efficacy as compared to the fully aerated control could be observed, except for E. coli, which were removed four times better in the control. No significant difference in removal efficacy for Total Organic Carbon, 5-day Carbonaceous Biochemical Oxygen Demand, caffeine, and naproxen were observed. A 50% non-aerated zone reduced the overall removal efficacy of biological effects. The highest removal efficacy for the moderately biodegradable micropollutants benzotriazole and diclofenac was observed in the system with 50% aeration. This could be due to the sharp increase of dissolved oxygen (DO) and oxidation reduction potential at the passage from the non-aerated to the aerated zone (at 75% of the fractional length). The internal concentration profiles of caffeine, ibuprofen and naproxen varied from 12.5%, 25%, 50% to 75% fractional length due to redox shift, DO variations and other conditions. A reduction of the aerated zone to 35% of the fractional length results in reduced treatment efficacy for benzotriazole, diclofenac, acesulfame and biological effects but 50% aeration yielded as much degradation as the fully aerated control. These results indicate that less aeration could provide similar effluent water quality, depending on the pollutants of interest. E. coli and biological effects were removed best in the fully aerated system.

Exploring the Extent of Phosphorus and Heavy Metal Uptake by Single Cells of Saccharomyces cerevisiae and Their Effects on Intrinsic Elements by SC-ICP-TOF-MS

The effect of six heavy metals, namely, silver (Ag), lead (Pb), palladium (Pd), copper (Cu), nickel (Ni), and chromium (Cr), on phosphorus (P) uptake by yeast was investigated by single-cell analysis using inductively coupled plasma time-of-flight mass spectrometry (SC-ICP-TOF-MS). It was found that the P content in cells with 1.55 g L^–1 P feeding after P starvation was increased by ∼70% compared to control cells. Heavy metals at 10 ppm, except Cu, had a negative impact on P accumulation by cells. Pd reduced the P content by 26% in single cells compared to control cells. Metal uptake was strongest for Ag and Pd (0.7 × 10^–12 L cell^–1) and weakest for Cr (0.05 × 10^–12 L cell^–1). Exposure to Cr markedly reduced (−50%) Mg in cells and had the greatest impact on the intrinsic element composition. The SC-ICP-TOF-MS shows the diversity of elemental content in single cells: for example, the P content under standard conditions varied between 12.4 and 890 fg cell^–1. This technique allows studying both the uptake of elements and sublethal effects on physiology at a single-cell level.

Sorption and Mobility of Charged Organic Compounds: How to Confront and Overcome Limitations in Their Assessment

Permanently charged and ionizable organic compounds (IOC) are a large and diverse group of compounds belonging to many contaminant classes, including pharmaceuticals, pesticides, industrial chemicals, and natural toxins. Sorption and mobility of IOCs are distinctively different from those of neutral compounds. Due to electrostatic interactions with natural sorbents, existing concepts for describing neutral organic contaminant sorption, and by extension mobility, are inadequate for IOC. Predictive models developed for neutral compounds are based on octanol-water partitioning of compounds (K_ow) and organic-carbon content of soil/sediment, which is used to normalize sorption measurements (K_OC). We revisit those concepts and their translation to IOC (D_ow and D_OC) and discuss compound and soil properties determining sorption of IOC under water saturated conditions. Highlighting possible complementary and/or alternative approaches to better assess IOC mobility, we discuss implications on their regulation and risk assessment. The development of better models for IOC mobility needs consistent and reliable sorption measurements at well-defined chemical conditions in natural porewater, better IOC-, as well as sorbent characterization. Such models should be complemented by monitoring data from the natural environment. The state of knowledge presented here may guide urgently needed future investigations in this field for researchers, engineers, and regulators.

Biomarker responses in zebrafish (Danio rerio) following long-term exposure to microplastic-associated chlorpyrifos and benzo(k)fluoranthene

Continuously increasing plastic production causes a constant accumulation of microplastic particles (MPs) in the aquatic environment, especially in industrialized and urbanized areas with elevated wastewater discharges. This coincides with the release of persistent organic pollutants (polycyclic aromatic hydrocarbons (PAHs), pesticides) entering limnic ecosystems. Although the assessment of potential effects of environmental pollutants sorbed to MPs under chronic exposure scenarios seems vital, data on potential hazards and risk by combined exposure to pollutants and microplastics for aquatic vertebrates is still limited. Therefore, zebrafish (Danio rerio) were exposed over 21 days to the organophosphate insecticide chlorpyrifos (CPF; 10 and 100 ng/L) and the PAH benzo(k)fluoranthene (BkF; 0.78 and 50 µg/L) either dissolved directly in water or sorbed to different MPs (irregular polystyrene, spherical polymethyl methacrylate; ≤ 100 µm), where CPF was sorbed to polystyrene MPs and BkF was sorbed to polymethyl methacrylate MPs. Contaminant sorption to MPs and leaching were documented using GC-EI-MS; potential accumulation was studied in cryosections of the gastrointestinal tract. Enzymatic biomarkers and biotransformation were measured in liver and brain. Overall, exposure to non-contaminated MPs did not induce any adverse effects. Results of fluorescence tracking, CYP1A modulation by BkF as well as changes in acetylcholinesterase activity (AChE) by CPF were less pronounced when contaminants were sorbed to MPs, indicating reduced bioavailability of pollutants. Overall, following exposure to waterborne BkF, only minor amounts of parent BkF and biotransformation products were detected in zebrafish liver. Even high loads of MPs and sorbed contaminants did not induce adverse effects in zebrafish; thus, the potential threat of MPs as vectors for contaminant transfer in limnic ecosystems can be considered limited.

Abiotic oxidative transformation of 6-PPD and 6-PPD quinone from tires and occurrence of their products in snow from urban roads and in municipal wastewater

The antiozonant N-phenyl-N'-(1,3-dimethylbutyl)-p-phenylenediamine (6-PPD) is added to tires to increase their lifetime and is emitted with tire and road wear particles into the environment. Recently, one of its transformation products (TPs), 6-PPD quinone (6-PPDQ), has gained attention due to its toxicity towards coho salmon. In this study, the abiotic oxidative transformation of 6-PPD is investigated by a series of ozonation experiments in the lab followed by analysis of TPs using liquid chromatography-high resolution-mass spectrometry (LC-HRMS). A total of 38 TPs were detected and tentatively identified, which were formed either directly from 6-PPD or via 6-PPDQ as intermediate. A suspect screening by LC-HRMS showed 32 of these TPs to occur in snow collected from urban roads as surrogate of road-runoff, where 6-PPDQ, 4-aminodiphenylamine (4-ADPA), TP 213, and TP 249 were the most prominent besides 6-PPD. More than 90% of the total load of 6-PPD and its TPs was found in the particulate fraction of snow. Thus, retaining the particulate fraction of road runoff before its discharge into surface water would substantially reduce the emission of 6-PPD and many of its TPs. Some TPs prevailed in the water phase of the snow due to their higher polarity. A total of 13 TPs were detected by suspect screening in the dissolved phase of a wastewater treatment plant (WWTP) influent. Their total load was markedly enhanced during a day of snowmelt (approx. 1100 g/d) and rainfall (approx. 2000 g/d) compared to dry weather (approx. 190 g/d). 6-PPD and 6-PPDQ contributed to less than 1% to this total load in the water phase (estimated concentrations of max 0.1 µg/L). The elimination of the estimated total loads of 6-PPD related TPs from the water phase in WWTP ranged from 22 to 67% depending on weather conditions. Eventually TP 249, 4-ADPA and TP 259_2 dominated in WWTP effluent (estimated concentration from 0.5 up to 2 µg/L). Thus TP 249 and TP 259_2 are, likely, the most specific and stable TPs of 6-PPD to be determined in the environment.

Effects of exposure to single and multiple parabens on asthma development in an experimental mouse model and a prospective cohort study

Parabens are widely used preservatives present in consumer products like cosmetics and food. Although several epidemiological studies suggest that early-life exposure to parabens might alter the immune response and allergy risk in childhood, the evidence with respect to asthma is not clear. Therefore, we investigated the effect of paraben exposure on asthma development in mice and humans. Using a murine asthma model the experimental data show both, an asthma-reducing effect after direct exposure of adult mice to n-butyl paraben (nBuP) as well as an asthma-promoting effect after maternal exposure to ethyl paraben (EtP) in the female offspring. Interestingly, exposure of mice to a mixture of EtP and nBuP starting prenatally until the end of asthma induction in the adult offspring was without effect on allergic airway inflammation. In addition, parabens were determined within the German prospective mother-child cohort LINA and their single and mixture effect on asthma development in children within the first 10 years of life was estimated by logistic and Bayesian kernel machine regression (BKMR). Both approaches revealed no adverse effects of parabens on children's asthma development, neither when stratified for being at risk due to a positive family history of atopy nor when analysed separately for sex specificity. Therefore, we conclude that although single parabens might differentially impact asthma development, an adverse effect could not be seen in a multiple paraben exposure setting. Consequently, not only the time point of exposure but also multiple exposure scenarios to parabens should be considered in the evaluation of individuals' specific disease risk.

Discovery of Polar Ozonation Byproducts via Direct Injection of Effluent Organic Matter with Online LC-FT-ICR-MS

Effluent organic matter (EfOM), a major ozone consumer during wastewater ozonation, is a complex mixture of natural and anthropogenic organic molecules. Ozonation of EfOM adds to molecular complexity by introducing polar and potentially mobile ozonation byproducts (OBPs). Currently, nontargeted direct infusion (DI) ultrahigh resolution mass spectrometry (e.g. FT-ICR-MS) is used to study OBPs but requires sample extraction, limiting the accessible polarity range of OBPs. To better understand the impact of ozonation on EfOM and the formation of polar OBPs, nonextracted effluent was analyzed by direct injection onto a reversed-phase liquid chromatography system (RP-LC) online hyphenated with an FT-ICR-MS. Over four times more OBPs were detected in nonextracted EfOM compared to effluent extracted with solid phase extraction and measured with DI-FT-ICR-MS (13817 vs 3075). Over 1500 highly oxygenated OBPs were detected exclusively in early eluting fractions of nonextracted EfOM, indicating polar OBPs. Oxygenation of these newly discovered OBPs is higher than previously found, with an average molecular DBE-O value of -3.3 and O/C ratio of 0.84 in the earliest eluting OBP fractions. These polar OBPs are consistently lost during extraction but may play an important role in understanding the environmental impact of ozonated EfOM. Moreover, 316 molecular formulas classified as nonreactive to ozone in DI-FT-ICR-MS can be identified with LC-FT-ICR-MS as isomers with varying degrees of reactivity, providing for the first time experimental evidence of differential reactivity of complex organic matter isomers with ozone.

Aging of tire and road wear particles in terrestrial and freshwater environments - A review on processes, testing, analysis and impact

The environmental fate of tire and road wear particles (TRWPs) receives increasing attention due to the per capita emission volumes of 0.2-5.5 kg/(cap year) and recent reports on the environmental hazard of TRWP constituents. It is expected that aging impacts TRWPs fate in the environment but detailed knowledge is quite limited, yet. Making use of information on tire aging, the available knowledge on environmental aging processes such as thermooxidation, photooxidation, ozonolysis, shear stress, biodegradation and leaching is reviewed here. Experimental techniques to simulate aging are addressed as are analytical techniques to determine aging induced changes of TRWPs, covering physical and chemical properties. The suitability of various tire wear test materials is discussed. Findings and methods from tire aging can be partially applied to study aging of TRWPs in the environment. There is a complex interplay between aging processes in the environment that needs to be considered in future aging studies. In addition to existing basic qualitative understanding of the aging processes, quantitative understanding of TRWP aging is largely lacking. Aging in the environment needs to consider the TRWPs as well as chemicals released. Next steps for filling the gaps in knowledge on aging of TRWPs in the environment are elaborated.

Zebrafish Oatp1d1 Acts as a Cellular Efflux Transporter of the Anionic Herbicide Bromoxynil

Toxicokinetics (TK) of ionic compounds in the toxico-/pharmacological model zebrafish embryo (Danio rerio) depend on absorption, distribution, metabolism, and elimination (ADME) processes. Previous research indicated involvement of transport proteins in the TK of the anionic pesticide bromoxynil in zebrafish embryos. We here explored the interaction of bromoxynil with the organic anion-transporting polypeptide zebrafish Oatp1d1. Mass spectrometry imaging revealed accumulation of bromoxynil in the gastrointestinal tract of zebrafish embryos, a tissue known to express Oatp1d1. In contrast to the Oatp1d1 reference substrate bromosulfophthalein (BSP), which is actively taken up by transfected HEK293 cells overexpressing zebrafish Oatp1d1, those cells accumulated less bromoxynil than empty vector-transfected control cells. This indicates cellular efflux of bromoxynil by Oatp1d1. This was also seen for diclofenac but not for carbamazepine, examined for comparison. Correspondingly, internal concentrations of bromoxynil and diclofenac in the zebrafish embryo were increased when coexposed with BSP, inhibiting the activities of various transporter proteins, including Oatp1d1. The effect of BSP on accumulation of bromoxynil and diclofenac was enhanced in further advanced embryo stages, indicating increased efflux activity in those stages. An action of Oatp1d1 as an efflux transporter of ionic environmental compounds in zebrafish embryos should be considered in future TK assessments.

The Eco-Exposome Concept: Supporting an Integrated Assessment of Mixtures of Environmental Chemicals

Organisms are exposed to ever-changing complex mixtures of chemicals over the course of their lifetime. The need to more comprehensively describe this exposure and relate it to adverse health effects has led to formulation of the exposome concept in human toxicology. Whether this concept has utility in the context of environmental hazard and risk assessment has not been discussed in detail. In this Critical Perspective, we propose-by analogy to the human exposome-to define the eco-exposome as the totality of the internal exposure (anthropogenic and natural chemicals, their biotransformation products or adducts, and endogenous signaling molecules that may be sensitive to an anthropogenic chemical exposure) over the lifetime of an ecologically relevant organism. We describe how targeted and nontargeted chemical analyses and bioassays can be employed to characterize this exposure and discuss how the adverse outcome pathway concept could be used to link this exposure to adverse effects. Available methods, their limitations, and/or requirement for improvements for practical application of the eco-exposome concept are discussed. Even though analysis of the eco-exposome can be resource-intensive and challenging, new approaches and technologies make this assessment increasingly feasible. Furthermore, an improved understanding of mechanistic relationships between external chemical exposure(s), internal chemical exposure(s), and biological effects could result in the development of proxies, that is, relatively simple chemical and biological measurements that could be used to complement internal exposure assessment or infer the internal exposure when it is difficult to measure. Environ Toxicol Chem 2022;41:30-45. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Direct Imaging of Plant Metabolites in the Rhizosphere Using Laser Desorption Ionization Ultra-High Resolution Mass Spectrometry

The interplay of rhizosphere components such as root exudates, microbes, and minerals results in small-scale gradients of organic molecules in the soil around roots. The current methods for the direct chemical imaging of plant metabolites in the rhizosphere often lack molecular information or require labeling with fluorescent tags or isotopes. Here, we present a novel workflow using laser desorption ionization (LDI) combined with mass spectrometric imaging (MSI) to directly analyze plant metabolites in a complex soil matrix. Undisturbed samples of the roots and the surrounding soil of Zea mays L. plants from either field- or laboratory-scale experiments were embedded and cryosectioned to 100 μm thin sections. The target metabolites were detected with a spatial resolution of 25 μm in the root and the surrounding soil based on accurate masses using ultra-high mass resolution laser desorption ionization Fourier-transform ion cyclotron resonance mass spectrometry (LDI-FT-ICR-MS). Using this workflow, we could determine the rhizosphere gradients of a dihexose (e.g., sucrose) and other plant metabolites (e.g., coumaric acid, vanillic acid). The molecular gradients for the dihexose showed a high abundance of this metabolite in the root and a strong depletion of the signal intensity within 150 μm from the root surface. Analyzing several sections from the same undisturbed soil sample allowed us to follow molecular gradients along the root axis. Benefiting from the ultra-high mass resolution, isotopologues of the dihexose could be readily resolved to enable the detection of stable isotope labels on the compound level. Overall, the direct molecular imaging via LDI-FT-ICR-MS allows for the first time a non-targeted or targeted analysis of plant metabolites in undisturbed soil samples, paving the way to study the turnover of root-derived organic carbon in the rhizosphere with high chemical and spatial resolution.

Risk from pesticide mixtures - The gap between risk assessment and reality

Pesticide applications in agricultural crops often comprise a mixture of plant protection products (PPP), and single fields face multiple applications per year leading to complex pesticide mixtures in the environment. Restricted to single PPP, the current European Union PPP regulation, however, disregards the ecological risks of pesticide mixtures. To quantify this additional risk, we evaluated the contribution of single pesticide active ingredients to the additive mixture risk for aquatic risk indicators (invertebrates and algae) in 464 different PPP used, 3446 applications sprayed and 830 water samples collected in Central Europe, Germany. We identified an average number of 1.3 different pesticides in a single PPP, 3.1 for complete applications often involving multiple PPP and 30 in stream water samples. Under realistic worst-case conditions, the estimated stream water pesticide risk based on additive effects was 3.2 times higher than predicted from single PPP. We found that in streams, however, the majority of regulatory threshold exceedances was caused by single pesticides alone (69% for algae, 81% for invertebrates). Both in PPP applications and in stream samples, pesticide exposure occurred in repeated pulses each driven by one to few alternating pesticides. The time intervals between pulses were shorter than the 8 weeks considered for ecological recovery in environmental risk assessment in 88% of spray series and 53% of streams. We conclude that pesticide risk assessment should consider an additional assessment factor to account for the additive, but also potential synergistic simultaneous pesticide mixture risk. Additionally, future research and risk assessment need to address the risk from the frequent sequential pesticide exposure observed in this study.

Ruthenium red: a highly efficient and versatile cell staining agent for single-cell analysis using inductively coupled plasma time-of-flight mass spectrometry

Staining of biological cells with heavy metals can increase their visibility in mass spectrometry. In this study, the potential of ruthenium red (RR) as a staining agent for single-cell analysis by inductively coupled plasma time-of-flight mass spectrometry (SC-ICP-TOF-MS) is explored using two different yeast strains and one algal species. Time-of-flight mass spectrometry allows the simultaneous detection of Ru and multiple intrinsic elements in single cells. Ru has a better correlation with Mg than with P in Saccharomyces cerevisiae (S. cerevisiae) cells. For the three tested strains, the staining efficiency of RR exceeded 96%; the staining strengths were 30-32 ag μm^-2 for the yeast cells and 59 ag μm^-2 for the algal cells. By deriving the cell volume of single cells from their Ru mass, the concentration of Mg and P in individual cells of S. cerevisiae can be calculated. Elemental concentrations of Mg and P were highly variable in the cell individuals, with their 25-75 percentile values of 0.10-0.19 and 0.76-2.07 fg μm^-3, respectively. RR staining has several advantages: it is fast, does not affect cell viability and is highly efficient. Provided that the shape of the individual cells of a culture is similar, Ru staining allows the elemental content to be directly correlated with the cell volume to accurately calculate the intracellular concentration of target elements in single cells. Therefore, RR can be a promising cell staining agent for future application in SC-ICP-TOF-MS research.

Prenatal paraben exposure and atopic dermatitis-related outcomes among children

BACKGROUND

Parabens, widely used as preservatives in cosmetics, foods, and other consumer products, are suspected of contributing to allergy susceptibility. The detection of parabens in the placenta or amniotic fluid raised concerns about potential health consequences for the child. Recently, an increased asthma risk following prenatal exposure has been reported. Here, we investigated whether prenatal paraben exposure can influence the risk for atopic dermatitis (AD).

METHODS

261 mother-child pairs of the German mother-child study LINA were included in this analysis. Eight paraben species were quantified in maternal urine obtained at gestational week 34. According to the parental report of physician-diagnosed AD from age 1 to 8 years, disease onset, and persistence, childhood AD was classified into four different phenotypes.

RESULTS

4.6% (n = 12) and 12.3% (n = 32) of the children were classified as having very early-onset AD (until age two) either with or without remission, 11.9% (n = 31) as early-onset (after age two), and 3.1% (n = 8) as childhood-onset AD (after age six). Exposure to ethylparaben and n-butylparaben was associated with an increased risk to develop very early-onset AD without remission (EtP: adj.OR/95% CI:1.44/1.04-2.00,nBuP:adj.OR/95% CI:1.95/1.22-3.12). The effects of both parabens were predominant in children without a history of maternal AD and independent of children's sex.

CONCLUSION

Prenatal EtP or nBuP exposure may increase children's susceptibility for persistent AD with disease onset at very early age. This association was particularly pronounced in children without a history of maternal AD, indicating that children without a genetic predisposition are more susceptible to paraben exposure.

Filling the knowledge gap: A suspect screening study for 1310 potentially persistent and mobile chemicals with SFC- and HILIC-HRMS in two German river systems

Persistent and mobile chemicals (PM chemicals) were searched for in surface waters by hydrophilic interaction liquid chromatography (HILIC) and supercritical fluid chromatography (SFC), both coupled to high resolution mass spectrometry (HRMS). A suspect screening was performed using a newly compiled list of 1310 potential PM chemicals to the data of 11 surface water samples from two river systems. In total, 64 compounds were identified by this approach. The overlap between HILIC- and SFC-HRMS was limited (31 compounds), confirming the complementarity of the two methods used. The identified PM candidates are characterized by a high polarity (median logD -0.4 at pH 7.5), a low molecular weight (median 187 g/mol), are mostly ionic (54 compounds) and contain a large number of heteroatoms (one per four carbons on average). Among the most frequently detected novel or yet scarcely investigated water contaminants were cyanoguanidine (11/11 samples), adamantan-1-amine (10/11), trifluoromethanesulfonate (9/11), 2-acrylamido-2-methylpropanesulfonate (10/11), and the inorganic anions hexafluorophosphate (11/11) and tetrafluoroborate (10/11). 31% of the identified suspects are mainly used in ionic liquids, a chemically diverse group of industrial chemicals with numerous applications that is so far rarely studied for their occurrence in the environment. Prioritization of the findings of PM candidates is hampered by the apparent lack of toxicity data. Hence, precautionary principles and minimization approaches should be applied for the risk assessment and risk management of these substances. The large share of novel water contaminants among these findings of the suspect screening indicates that the universe of PM chemicals present in the environment has so far only scarcely been explored. Dedicated analytical methods and screening lists appear essential to close the analytical gap for PM compounds.

Small streams-large concentrations? Pesticide monitoring in small agricultural streams in Germany during dry weather and rainfall

Few studies have examined the exposure of small streams (< 30 km² catchment size) to agriculturally used pesticides, compared to large rivers. A total of 105 sites in 103 small agricultural streams were investigated for 76 pesticides (insecticides, herbicides, fungicides) and 32 pesticide metabolites in spring and summer over two years (2018 and 2019) during dry weather and rainfall using event-driven sampling. The median total concentration of the 76 pesticides was 0.18 µg/L, with 9 pesticides per sample on average (n = 815). This is significantly higher than monitoring data for larger streams, reflecting the close proximity to agricultural fields and the limited dilution by non-agricultural waters. The frequency of detection of all pesticides correlated with sales quantity and half-lives in water. Terbuthylazine, MCPA, boscalid, and tebuconazole showed the highest median concentrations. The median of the total concentration of the 32 metabolites exceeded the pesticide concentration by more than an order of magnitude. During dry weather, the median total concentration of the 76 pesticides was 0.07 µg/L, with 5 pesticides per sample on average. Rainfall events increased the median total pesticide concentration by a factor of 10 (to 0.7 µg/L), and the average number of pesticides per sample to 14 (with up to 41 in single samples). The concentration increase was particularly strong for 2,4-D, MCPA, terbuthylazine, and nicosulfuron (75 percentile). Metabolite concentrations were generally less responsive to rainfall, except for those of terbuthylazine, flufenacet, metamitron, and prothioconazole. The frequent and widespread exceedance of the regulatory acceptable concentrations (RAC) of the 76 pesticides during both, dry weather and rainfall, suggests that current plant protection product authorization and risk mitigation methods are not sufficient to protect small streams.

Organic Markers of Tire and Road Wear Particles in Sediments and Soils: Transformation Products of Major Antiozonants as Promising Candidates

Tire and road wear particles (TRWPs) are one of the main sources of particulate traffic emissions, but measured data on TRWP contents in the environment are scarce. This study aims at identifying organic compounds suitable as quantitative markers for TRWPs by a tiered multistep selection process involving nontarget screening and subsequent identification by liquid-chromatography high-resolution mass spectrometry. Starting from several thousands of signals recorded in the extract of tire particles, the rigorous selection process considered source specificity, tendency of leaching, analytical sensitivity and precision, and stability during aging. It led to three transformation products of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6-PPD) as the most suitable marker candidates: N-formyl-6-PPD, hydroxylated N-1,3-dimethylbutyl-N-phenyl quinone diimine, and 6-PPD-quinone. A linear response in standard addition experiments with tire particles and the correlation with TRWP contents in a diverse set of environmental samples imply that these compounds are promising candidates as markers for the quantification of TRWPs. Organic markers for TRWP contents in the environment would allow TRWP quantification with the traditional tandem MS (LC-MS/MS) equipment of an organic trace analytical laboratory and, thus, allow easy generation of data on TRWP occurrence in sediments and soils and other environmental matrices.

Comprehensive characterization of tire and road wear particles in highway tunnel road dust by use of size and density fractionation

Tire and road wear particles (TRWPs) are a major component of non-exhaust traffic emissions, but knowledge about their physico-chemical properties is limited. Road dust of a highway tunnel was fractionated by size and density, and fractions were analyzed for TRWPs, metals, seven tire tread indicator chemicals (benzothiazoles, 6-PPD and DPG) and effects in in-vitro bioassays. TRWP content in tunnel dust was very high (11-12%). The peak of the TRWP mass distribution was in the size fraction 20-50 μm, with 31-36% of the total TRWP mass and a content of up to 260 mg/g. The mass of organic tire constituents peaked in the smallest analyzed size fractions (<20 μm) with 35-55% of their total mass. They also peaked in the density fraction 1.3-1.7 g/cm³, indicating a lower TRWP density and a higher contribution of TP to TRWP (approx. 75%) than expected. Video-based shape analysis and SEM showed elongated particles, likely TRWPs, to be present in those size and density fractions ascribed to TRWPs by chemical analysis. But also irregular heteroagglomerates could be found. Solvent extracts of size and density fractions induced effects in bioassays indicative of the activation of the arylhydrocarbon receptor (AhR-CALUX) and the adaptive response to oxidative stress (AREc32). Similar comprehensive characterization of road dust from other sites may be needed to decide on whether TRWPs occurring in high concentrations in tunnel dust are suited as representative test materials for analytical purposes and TRWP fate studies.

Perfluoroalkyl substances (PFASs) in the Ugandan waters of Lake Victoria: Spatial distribution, catchment release and public exposure risk via municipal water consumption

Perfluoroalkyl substances (PFASs) have scarcely been studied in the Lake Victoria Basin and Africa in general. We investigated spatial profiles of PFASs in the Ugandan part of Lake Victoria, their influxes and human exposure via drinking water. We analyzed open lake water, riverine water (Rivers Kagera and Sio), urban drainage water (Nakivubo Channel), over-lake bulk atmospheric deposition and municipal tap water (Kampala, Jinja and Entebbe). The average concentrations (ng/L) for individual target PFASs were in the ranges of 0.08-23.8 (Nakivubo Channel), 0.01-10.8 (Murchison Bay), <MDL-5.38 (Kampala tap water), 0.01-3.64 (R. Kagera), <MDL-3.56 (Jinja tap water), <MDL-3.35 (R. Sio), <MDL-1.96 (Entebbe tap water), <MDL-1.46 (open lake) and <MDL-1.00 (atmospheric deposition). Estimated contribution of input pathways to ∑PFAS fluxes into Lake Victoria was in the order atmospheric deposition > R. Kagera, >R. Sio > Nakivubo Channel. Perfluorohexanoic acid (PFHxA) and perfluorooctane sulfonic acid (PFOS) had the highest influx and retention estimates, respectively. Perfluoroalkane sulfonates (PFSAs) were mostly associated with urban drainage samples. PFASs were likely recycled from the Nakivubo Channel, through the Murchison Bay, into municipal drinking water. The estimated human exposure to ∑₁₁PFASs via drinking water indicated low risk of adverse health effects.

Moxidectin toxicity to zebrafish embryos: Bioaccumulation and biomarker responses

Moxidectin is an antiparasitic drug belonging to the class of the macrocyclic lactones, subgroup mylbemicins. It is used worldwide in veterinary practice, but little is known about its potential environmental risks. Thus, we used the zebrafish embryo as a model system to study the potential effects of moxidectin on aquatic non-target organisms. The analyses were performed in two experimental sets: (1) acute toxicity and apical endpoints were characterized, with biomarker assays providing information on the activity levels of catalase (CAT), glutathione S-transferase (GST), lactate dehydrogenase (LDH), and acetylcholinesterase (AChE); and (2) internal concentration and spatial distribution of moxidectin were determined using ultraperformance liquid chromatography quadrupole-time-of-flight mass spectrometry (UPLC-QToF-MS) and matrix-assisted laser desorption/ionization-MS imaging (MALDI-MSi). The acute toxicity to zebrafish embryos (96 hpf) appeared mainly as a decrease in hatching rates (EC₅₀ = 20.75 μg/L). It also altered the enzymatic activity of biomarker enzymes related to xenobiotic processing, anaerobic metabolism, and oxidative stress (GST, LDH, and CAT, respectively) and strongly accumulated in the embryos, as internal concentrations were 4 orders of magnitude higher than those detected in exposure solutions. MALDI-MSi revealed accumulations of the drug mainly in the head and eyes of the embryos (72 and 96 hpf). Thus, our results show that exposure to moxidectin decreases hatching success by 96 h and alters biochemical parameters in the early life stages of zebrafish while accumulating in the head and eye regions of the animals, demonstrating the need to prioritize this compound for environmental studies.

Pesticides are the dominant stressors for vulnerable insects in lowland streams

Despite elaborate regulation of agricultural pesticides, their occurrence in non-target areas has been linked to adverse ecological effects on insects in several field investigations. Their quantitative role in contributing to the biodiversity crisis is, however, still not known. In a large-scale study across 101 sites of small lowland streams in Central Europe, Germany we revealed that 83% of agricultural streams did not meet the pesticide-related ecological targets. For the first time we identified that agricultural nonpoint-source pesticide pollution was the major driver in reducing vulnerable insect populations in aquatic invertebrate communities, exceeding the relevance of other anthropogenic stressors such as poor hydro-morphological structure and nutrients. We identified that the current authorisation of pesticides, which aims to prevent unacceptable adverse effects, underestimates the actual ecological risk as (i) measured pesticide concentrations exceeded current regulatory acceptable concentrations in 81% of the agricultural streams investigated, (ii) for several pesticides the inertia of the authorisation process impedes the incorporation of new scientific knowledge and (iii) existing thresholds of invertebrate toxicity drivers are not protective by a factor of 5.3 to 40. To provide adequate environmental quality objectives, the authorisation process needs to include monitoring-derived information on pesticide effects at the ecosystem level. Here, we derive such thresholds that ensure a protection of the invertebrate stream community.

Removal of micropollutants and biological effects by conventional and intensified constructed wetlands treating municipal wastewater

Seven treatment wetlands and a municipal wastewater treatment plant (WWTP) were weekly monitored over the course of one year for removal of conventional wastewater parameters, selected micropollutants (caffeine, ibuprofen, naproxen, benzotriazole, diclofenac, acesulfame, and carbamazepine) and biological effects. The treatment wetland designs investigated include a horizontal subsurface flow (HF) wetland and a variety of wetlands with intensification (aeration, two-stages, or reciprocating flow). Complementary to the common approach of analyzing individual chemicals, in vitro bioassays can detect the toxicity of a mixture of known and unknown components given in a water sample. A panel of five in vitro cell-based reporter gene bioassays was selected to cover environmentally relevant endpoints (AhR: indicative of activation of the aryl hydrocarbon receptor; PPARγ: binding to the peroxisome proliferator-activated receptor gamma; ERα: activation of the estrogen receptor alpha; GR: activation of the glucocorticoid receptor; oxidative stress response). While carbamazepine was persistent in the intensified treatment wetlands, mean monthly mass removal of up to 51% was achieved in the HF wetland. The two-stage wetland system showed highest removal efficacy for all biological effects (91% to >99%). The removal efficacy for biological effects ranged from 56% to 77% for the HF wetland and 60% to 99% for the WWTP. Bioanalytical equivalent concentrations (BEQs) for AhR, PPARγ, and oxidative stress response were often below the recommended effect-based trigger (EBT) values for surface water, indicating the great benefit for using nature-based solutions for water treatment. Intensified treatment wetlands remove both individual micropollutants and mixture effects more efficiently than conventional (non-aerated) HF wetlands, and in some cases, the WWTP.

Determination of elemental distribution and evaluation of elemental concentration in single Saccharomyces cerevisiae cells using single cell-inductively coupled plasma mass spectrometry

Single-cell analysis using inductively coupled plasma mass spectrometry (SC-ICP-MS) is a method to obtain qualitative and quantitative information of the elemental content and distribution of single cells. Six intrinsic target elements were analyzed in yeast cells at different cell growth phases cultured in medium with different phosphorus concentrations (0, 7, 14 mM) to study its effect on cell growth and composition. SC-ICP-MS results were compared with those obtained by the acid digestion and the average ratio was 0.81. The limits of detection of this method were 0.08, 2.54, 12.5, 0.02, 0.02, and 0.08 fg cell-1 for Mg, P, K, Mn, Cu, and Zn, respectively. During the exponential growth phase, the cells exhibited higher elemental contents, wider distribution for most elements, and larger cell size in comparison to the stationary growth phase. Phosphorus-free conditions reduced the average P content in single cells of stationary growth phase from 650 to 80 fg. Phosphorus deficiency led to decreasing intracellular concentrations not only of P but also of K and Cu, and to increasing Zn concentration after 48 h. Mg maintained its concentration at ∼0.11 fg µm-3 and did not change significantly under the three investigated conditions after 48 h. Accordingly, Mg content was successfully used to estimate the intracellular concentration of other intrinsic elements in single yeast cells. SC-ICP-MS is suited to determine target elements in single yeast cells, and allows the study of heterogeneity of cell composition and effects of stressors on the elemental content, distribution, and concentrations of intrinsic elements.

Ozonation products from trace organic chemicals in municipal wastewater and from metformin: peering through the keyhole with supercritical fluid chromatography-mass spectrometry

Ozonation is an important process to further reduce the trace organic chemicals (TrOCs) in treated municipal wastewater before discharge into surface waters, and is expected to form products that are more oxidized and more polar than their parent compounds. Many of these ozonation products (OPs) are biodegradable and thus removed by post-treatment (e.g., aldehydes). Most studies on OPs of TrOCs in wastewater rely on reversed-phase liquid chromatography- mass spectrometry (RPLC-MS), which is not suited for highly polar analytes. In this study, supercritical fluid chromatography combined with high resolution MS (SFC-HRMS) was applied in comparison to the generic RPLC-HRMS to search for OPs in ozonated wastewater treatment plant effluent at pilot-scale. While comparable results were obtained from these two techniques during suspect screenings for known OPs, a total of 23 OPs were only observed by SFC-HRMS via non-targeted screening. Several SFC-only OPs were proposed as the derivatives of methoxymethylmelamines, phenolic sulfates/sulfonates, and metformin; the latter was confirmed by laboratory-scale ozonation experiments. A complete ozonation pathway of metformin, a widespread and extremely hydrophilic TrOC in aquatic environment, was elaborated based on SFC-HRMS analysis. Five of the 10 metformin OPs are reported for the first time in this study. Three different dual-media filters were compared as post-treatments, and a combination of sand/anthracite and fresh post-granular activated carbon proved most effective in OPs removal due to the additional adsorption capacity. However, six SFC-only OPs, two of which originating from metformin, appeared to be persistent during all post-treatments, raising concerns on their occurrence in drinking water sources impacted by wastewater.