Bacterial biosurfactant increases ex situ biodiesel bioremediation in clayey soil

Co-production of lipases and biosurfactants by Bacillus methylotrophicus in solid-state fermentation

The production of biosurfactants and lipases through solid-state fermentation (SSF) processes remains relatively unexplored, especially in bacterial applications. The use of solid matrices, eliminating the need for precipitation and recovery processes, holds significant potential for facilitating bioremediation. This study aimed to simultaneously produce biocompounds via SSF using Bacillus methylotrophicus and employ the fermented substrate for remediating soil contaminated with 20% biodiesel. Initial efforts focused on determining optimal conditions for concurrent lipase and biosurfactant production during an 8-day fermentation period. The selected conditions, including a substrate mix of wheat bran and corn cob (80/20), 75% moisture, 1% glycerol inducer, 2% nitrogen, and 1% sugarcane molasses, resulted in a 24.61% reduction in surface tension and lipase activity of 3.54 ± 1.20 U. Subsequently, a 90-day bioremediation of clayey soil contaminated with biodiesel showcased notable biodegradation, reaching 72.08 ± 0.36% within the initial 60 days. The incorporation of biocompounds, biostimulation, and bioaugmentation (Test E2) contributed to this efficacy. The use of the fermented substrate as a biostimulant and bioaugmentation agent facilitated in situ biocompound production in the soil, leading to a 23.97% reduction in surface tension and lipase production of 1.52 ± 0.19 U.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03910-7.

A review on control and abatement of soil pollution by heavy metals: Emphasis on artificial intelligence in recovery of contaminated soil

"Save Soil Save Earth" is not just a catchphrase; it is a necessity to protect soil ecosystem from the unwanted and unregulated level of xenobiotic contamination. Numerous challenges such as type, lifespan, nature of pollutants and high cost of treatment has been associated with the treatment or remediation of contaminated soil, whether it be either on-site or off-site. Due to the food chain, the health of non-target soil species as well as human health were impacted by soil contaminants, both organic and inorganic. In this review, the use of microbial omics approaches and artificial intelligence or machine learning has been comprehensively explored with recent advancements in order to identify the sources, characterize, quantify, and mitigate soil pollutants from the environment for increased sustainability. This will generate novel insights into methods for soil remediation that will reduce the time and expense of soil treatment.

Microbial Biosurfactant as an Alternate to Chemical Surfactants for Application in Cosmetics Industries in Personal and Skin Care Products: A Critical Review

Cosmetics and personal care items are used worldwide and administered straight to the skin. The hazardous nature of the chemical surfactant utilized in the production of cosmetics has caused alarm on a global scale. Therefore, bacterial biosurfactants (BS) are becoming increasingly popular in industrial product production as a biocompatible, low-toxic alternative surfactant. Chemical surfactants can induce allergic responses and skin irritations; thus, they should be replaced with less harmful substances for skin health. The cosmetic industry seeks novel biological alternatives to replace chemical compounds and improve product qualities. Most of these chemicals have a biological origin and can be obtained from plant, bacterial, fungal, and algal sources. Various biological molecules have intriguing capabilities, such as biosurfactants, vitamins, antioxidants, pigments, enzymes, and peptides. These are safe, biodegradable, and environmentally friendly than chemical options. Plant-based biosurfactants, such as saponins, offer numerous advantages over synthetic surfactants, i.e., biodegradable, nontoxic, and environmentally friendly nature. Saponins are a promising source of natural biosurfactants for various industrial and academic applications. However, microbial glycolipids and lipopeptides have been used in biotechnology and cosmetics due to their multifunctional character, including detergency, emulsifying, foaming, and skin moisturizing capabilities. In addition, some of them have the potential to be used as antibacterial agents. In this review, we like to enlighten the application of microbial biosurfactants for replacing chemical surfactants in existing cosmetic and personal skincare pharmaceutical formulations due to their antibacterial, skin surface moisturizing, and low toxicity characteristics.

Bacterial-derived surfactants: an update on general aspects and forthcoming applications

The search for sustainable alternatives to the production of chemicals using renewable substrates and natural processes has been widely encouraged. Microbial surfactants or biosurfactants are surface-active compounds synthesized by fungi, yeasts, and bacteria. Due to their great metabolic versatility, bacteria are the most traditional and well-known microbial surfactant producers, being Bacillus and Pseudomonas species their typical representatives. To be successfully applied in industry, surfactants need to maintain stability under the harsh environmental conditions present in manufacturing processes; thus, the prospection of biosurfactants derived from extremophiles is a promising strategy to the discovery of novel and useful molecules. Bacterial surfactants show interesting properties suitable for a range of applications in the oil industry, food, agriculture, pharmaceuticals, cosmetics, bioremediation, and more recently, nanotechnology. In addition, they can be synthesized using renewable resources as substrates, contributing to the circular economy and sustainability. The article presents a general and updated review of bacterial-derived biosurfactants, focusing on the potential of some groups that are still underexploited, as well as, recent trends and contributions of these versatile biomolecules to circular bioeconomy and nanotechnology.

Enhancing the ability of two kinds of oil-degrading bacteria to treat oily sludge by optimising the growth conditions using a response surface methodology

Biosurfactant are Surfactants produced by certain microorganisms. These biosurfactants increase the biodegradability of insoluble pollutants. In this study, the fermentation products of Pseudomonas stutzeri Lh-42 (PS) and Rhodococcus sp. PR-1 (RD) were studied by Oil spreading method, emulsifying activity and infrared spectrum analysis. It was proved that these fermentation products were biosurfactant. And then the fermentation conditions of PS, RD were optimised by Placket-Burman (PB) design, hill-climbing experiment and response surface methodology (RSM). N source and liquid loading were significant factors in the fermentation of PS, while C source and speed were significant factors in the fermentation of RD. The surface tension was found to be as low as 39.53 ± 0.25 mN/m for the fermentation conditions of PS with an N source of 4.62 ± 0.41 g and a liquid loading of 28.4 ± 0.3%. The surface tension was 40.70 ± 0.47 mN/m for the incubation conditions of RD with a C source of 26.94 ± 0.62 g and a rotational speed of 210 r/min. Finally, the experimental results for the degradation of oily sludge showed that the degradation rate of oily sludge was improved when the fermentation conditions were optimised. The results of the infrared spectroscopy analysis showed that the organic matter content of the oily sludge treated with PS bacteria was significantly reduced after the optimised fermentation. This study provides a theoretical reference for further use of these bacteria to produce biosurfactants to treat organic matter.

A review of the role of biosurfactants in the biodegradation of hydrophobic organopollutants: production, mode of action, biosynthesis and applications

The increasing influence of human activity and industrialization has adversely impacted the environment via pollution with organic contaminants, which are minimally soluble in water. These hydrophobic organopollutants may be present in sediment, water or biota and have created concern due to their toxic effects in mammals. The ability of microorganisms to degrade pollutants makes their use the most effective, inexpensive and ecofriendly method for environmental remediation. Microorganisms have the ability to produce natural surfactants (biosurfactants) that increase the bioavailability of hydrophobic organopollutants, which enables their use as carbon and energy sources. Due to microbial diversity in production, and the biodegradability, nontoxicity, stability and specific activity of the surfactants, the use of microbial surfactants has the potential to overcome problems associated with contamination by hydrophobic organopollutants.This review provides an overview of the current state of knowledge regarding microbial surfactant production, mode of action in the biodegradation of hydrophobic organopollutants and biosynthetic pathways as well as their applications using emergent strategy tools to remove organopollutants from the environment. It is also specified for the first time that biosurfactants are produced either as growth-associated products or secondary metabolites, and are produced in different amounts by a wide range of microorganisms.

Agro-industrial wastewater in a circular economy: Characteristics, impacts and applications for bioenergy and biochemicals

The generation of agroindustrial byproducts is rising fast worldwide. The slaughter of animals, the production of bioethanol, and the processing of oil palm, cassava, and milk are industrial activities that, in 2019, generated huge amounts of wastewaters, around 2448, 1650, 256, 85, and 0.143 billion liters, respectively. Thus, it is urgent to reduce the environmental impact of these effluents through new integrated processes applying biorefinery and circular economy concepts to produce energy or new products. This review provides the characteristics of some of the most important agro-industrial wastes, including their physicochemical composition, worldwide average production, and possible environmental impacts. In addition, some alternatives for reusing these materials are addressed, focusing mainly on energy savings and the possibilities of generating value-added products. Finally, this review considers recent research and technological innovations and perspectives for the future.

Improving the Bioremediation and in situ Production of Biocompounds of a Biodiesel-Contaminated Soil

We aimed to produce simultaneously biosurfactants and lipases in solid state fermentation (SSF) using Aspergillus niger, followed by the use of the fermented media on the bioremediation of oily contaminated soil, in order to valuate agro industrial residuals and reduce the contamination. The biocompounds were produced using wheat bran and corncob (80:20), 5% of soybean oil and 0.5% of sugar cane molasses in SSF for 4 d, producing 4.58 ± 0.69 UE of emulsifying activity and 7.77 ± 1.52 U of lipolytic activity. This fermented media was used in the bioremediation of a 20% biodiesel contaminated soil, evaluating for 90 d microbial growth, contaminant degradation, and production of lipases and biosurfactants in soils. Six experimental strategies (natural attenuation; biostimulation + bioaugmentation + biocompounds; biostimulation + biosurfactant; biocompounds extract; biostimulation; adsorption of contaminant) were realized. The highest degradation of contaminant was verified in 90 d, of 74.40 ± 1.76%, and the production of biosurfactants and lipases in situ in the soil was found in 30 d (6.02 ± 0.24% of reduction in surface tension and 6.62 ± 0.17 UL of lipid activity in soil) for the same experiment (biostimulation + bioaugmentation + biocompounds). The addition of biostimulation + biosurfactant promotes higher biodegradation (66.00 ± 0.92%) of the contaminant than the biocompounds extract (59.58 ± 0.34%). The use of a solid fermented culture medium containing both biocompounds was feasible for the treatment of contaminants, demonstrating the potential for environmental application without the need for purification processes.