A drug delivery system based on alginate microspheres: mass-transport test and in vitro validation

Cartilage tissue engineering using decellularized biomatrix hydrogel containing TGF-β-loaded alginate microspheres in mechanically loaded bioreactor

Physiochemical tissue inducers and mechanical stimulation are both efficient variables in cartilage tissue fabrication and regeneration. In the presence of biomolecules, decellularized extracellular matrix (ECM) may trigger and enhance stem cell proliferation and differentiation. Here, we investigated the controlled release of transforming growth factor beta (TGF-β1) as an active mediator of mesenchymal stromal cells (MSCs) in a biocompatible scaffold and mechanical stimulation for cartilage tissue engineering. ECM-derived hydrogel with TGF-β1-loaded alginate-based microspheres (MSs) was created to promote human MSC chondrogenic development. Ex vivo explants and a complicated multiaxial loading bioreactor replicated the physiological conditions. Hydrogels with/without MSs and TGF-β1 were highly cytocompatible. MSCs in ECM-derived hydrogel containing TGF-β1/MSs showed comparable chondrogenic gene expression levels as those hydrogels with TGF-β1 added in culture media or those without TGF-β1. However, constructs with TGF-β1 directly added within the hydrogel had inferior properties under unloaded conditions. The ECM-derived hydrogel group including TGF-β1/MSs under loading circumstances formed better cartilage matrix in an ex vivo osteochondral defect than control settings. This study demonstrates that controlled local delivery of TGF-β1 using MSs and mechanical loading is essential for neocartilage formation by MSCs and that further optimization is needed to prevent MSC differentiation towards hypertrophy.

The effective treatment of multi-drug resistant tumors with self-assembling alginate copolymers

Alginates of two different chain lengths were alkyne functionalized on the hydroxyl group, leaving all carboxylic groups intact.

Facilitation of transscleral drug delivery by drug loaded magnetic polymeric particles

A unique method was used to facilitate ocular drug delivery from periocular route by drug loaded magnetic sensitive particles. Injection of particles in periocular space along the eye axis followed by application of magnetic field in front of the eye would trigger the magnetic polymeric particles to move along the direction of magnetic force and reside against the outer surface of the sclera. This technique prevents removal of drug in the periocular space, observed in conventional transscleral drug delivery systems and hence higher amount of drug can enter the eye in a longer period of time. The experiments were performed by fresh human sclera and an experimental setup. Experimental setup was designed by side by side diffusion cell and hydrodynamic and thermal simulation of the posterior segment of the eye were applied. Magnetic polymeric particles were synthesized by alginate as a model polymer, iron oxide nanoparticles as a magnetic agent and diclofenac sodium as a model drug and characterized by SEM, TEM, DLS and FT-IR techniques. According to the SEM images, the size range of particles is around 60 to 800nm. The results revealed that the cumulative drug transfer from magnetic sensitive particles across the sclera improves by 70% in the presence of magnetic field. The results of this research show promising method of drug delivery to use magnetic properties to facilitate drug delivery to the back of the eye.

Composite material consisting of microporous β-TCP ceramic and alginate for delayed release of antibiotics

OBJECTIVE

The aim of this study was to produce a novel composite of microporous β-TCP filled with alginate and Vancomycin (VAN) to prolong the release behavior of the antibiotic for up to 28days.

MATERIAL AND METHODS

Using the flow chamber developed by the group, porous ceramics in a directional flow were filled with alginates of different composition containing 50mg/mL of antibiotics. After cross-linking the alginate with calcium ions, incubation took place in 10mL double-distilled water for 4weeks at 37°C. At defined times (1, 2, 3, 6, 9, 14, 20 and 28days), the liquid was completely exchanged and analyzed by capillary zone electrophoresis and microtiter trials. For statistical purposes, the mean and standard deviation were calculated and analyzed by ANOVA.

RESULTS

The release of VAN from alginate was carried out via an external calcium source over the entire period with concentrations above the minimal inhibitory concentration (MIC). The burst release measured 35.2±1.5%. The release of VAN from alginate with an internal calcium source could only be observed over 14days. The burst release here was 61.9±4.3%. The native alginate's burst release was 54.1±7.8%; that of the sterile alginate 40.5±6.4%. The microtiter experiments revealed efficacy over the entire study period for VAN. The MIC value was determined in the release experiments as well in a range of 0.5-2.0μg/mL against Staphylococcus aureus.

STATEMENT OF SIGNIFICANCE

Drug release systems based on β-TCP and hydrogels are well documented in literature. However, in all described systems the ceramic, as granule or powder, is inserted into a hydrogel. In our work, we do the opposite, a hydrogel which acts as reservoir for antibiotics is placed into a porous biodegradable ceramic. Eventually, this system should be applied as treatment of bone infections. Contrary to the "granule in hydrogel" composites it has the advantage of mechanical stability. Thus, it can take over functions of the bone during the healing process. For a quicker translation from our scientific research into clinical use, only FDA approved materials were used in this work.

Calcium triggered self-assembly of alginate-graft-POEGMA via RAFT for the encapsulation of lipophillic actives

Self-assembly of alginate into nanoparticles was realized by grafting hydrophilic brushes via RAFT.

Light-responsive iron(III)-polysaccharide coordination hydrogels for controlled delivery

Visible-light responsive gels were prepared from two plant-origin polyuronic acids (PUAs), alginate and pectate, coordinated to Fe(III) ions. Comparative quantitative studies of the photochemistry of these systems revealed unexpected differences in the photoreactivity of the materials, depending on the polysaccharide and its composition. The roles that different functional groups play on the photochemistry of these biomolecules were also examined. Mannuronic-rich alginates were more photoreactive than guluronic acid-rich alginate and than pectate. The microstructure of alginates with different mannuronate-to-guluronate ratios changed with polysaccharide composition. This influenced the gel morphology and the photoreactivity. Coordination hydrogel beads were prepared from both Fe-alginate and Fe-pectate. The beads were stable carriers of molecules as diverse as the dye Congo Red, the vitamin folic acid, and the antibiotic chloramphenicol. The photoreactivity of the hydrogel beads mirrored the photoreactivity of the polysaccharides in solution, where beads prepared with alginate released their cargo faster than beads prepared with pectate. These results indicate important structure-function relationships in these systems and create guidelines for the design of biocompatible polysaccharide-based materials where photoreactivity and controlled release can be tuned on the basis of the type of polysaccharide used and the metal coordination environment.

Single-step laser-based fabrication and patterning of cell-encapsulated alginate microbeads

Alginate can be used to encapsulate mammalian cells and for the slow release of small molecules. Packaging alginate as microbead structures allows customizable delivery for tissue engineering, drug release, or contrast agents for imaging. However, state-of-the-art microbead fabrication has a limited range in achievable bead sizes, and poor control over bead placement, which may be desired to localize cellular signaling or delivery. Herein, we present a novel, laser-based method for single-step fabrication and precise planar placement of alginate microbeads. Our results show that bead size is controllable within 8%, and fabricated microbeads can remain immobilized within 2% of their target placement. Demonstration of this technique using human breast cancer cells shows that cells encapsulated within these microbeads survive at a rate of 89.6%, decreasing to 84.3% after five days in culture. Infusing rhodamine dye into microbeads prior to fluorescent microscopy shows their 3D spheroidal geometry and the ability to sequester small molecules. Microbead fabrication and patterning is compatible with conventional cellular transfer and patterning by laser direct-write, allowing location-based cellular studies. While this method can also be used to fabricate microbeads en masse for collection, the greatest value to tissue engineering and drug delivery studies and applications lies in the pattern registry of printed microbeads.

Method for characterization of PEGylated bioproducts in biological matrixes

PEGylation of peptides and proteins has been widely used to enhance stability and reduce immunogenicity of biotherapeutics. Characterizing the degradation of these PEGylated products in biological fluids can yield essential information to support pharmacokinetic evaluations and provide clues about their in vivo properties useful for further molecular optimization. In this paper, we describe a novel and uncomplicated approach to characterize PEGylated peptides or proteins and their related degradation products in biological matrixes. The method involves direct liquid chromatography/mass spectrometry (LC/MS) analysis of animal sera containing low nanograms to low micrograms per milliliter of PEGylated product with or without an acetonitrile precipitation sample treatment. Applying the methodology to analyze the model PEGylated peptides, 20K PEGylated-Pancreatic Polypeptide analogue (PPA) and 20K PEGylated-glucagon, we elucidated the decomposition pathways occurring in animal sera. The data provided direct evidence of cleavages within the peptide backbone. The identified degradation products were unambiguously confirmed by tandem mass spectrometry with high-energy C-trap dissociation (HCD) analysis, followed with in-source fragmentation. Additional spiking studies demonstrated nearly full recovery of PEGylated products, linear detection when the spiked concentration of PEGylated product was ≤1000 ng/mL, and a low ng/mL limit of quantitation (LOQ).

Effect of size on the cellular endocytosis and controlled release of mesoporous silica nanoparticles for intracellular delivery

Due to the unique physicochemical properties and membrane-permeable capacity, mesoporous silica nanoparticles (MSNs) are considered as an ideal carrier for intracellular delivery. Herein, we endeavored to address the size effect of MSNs on the cellular uptake, endosomal escape and controlled release, the key steps for the intracellular delivery. The well-ordered MSNs in the range from 55-nm to 440-nm with similar pore texture were prepared by modified base-catalyzed sol-gel method. With MC3T3-E1 model cell line, the in vitro results indicated that after 12 h cultivation, MSNs within 55 ~ 440 nm could all be internalized into the cells, and further escaped out of the endosomal compartment. The efficiency of the cellular uptake and endosomal escape strongly depended on the particle size, with the best efficiencies from 100-nm MSNs. Furthermore, the MTT results indicated that these MSNs materials were all biocompatible. The controlled release experiments with hydrophobic dexamethasone and hydrophilic vitamin C as models showed that for these small-molecular drugs, the loading amount all mainly determined by the surface area of the MSNs, and the subsequent release of the drug dramatically decreased with the increasing of the particle size. By contrast, the release rate of vitamin C was much quicker than that of the dexamethasone. These findings presented here could provide new means to tailor the size of MSNs and thus to guide the design of MSNs-based intracellular delivery system. Due to the good cell biocompatibility, high cellular uptake and endosomal escape, we conjectured that the 100-nm MSNs are more favorable for the intracellular delivery of drugs in live cells.

Chitosan scaffolds with BMP-6 loaded alginate microspheres for periodontal tissue engineering

The aim of this study is to develop an effective growth factor releasing scaffold-microsphere system for promoting periodontal tissue engineering. Bone morphogenetic protein-6 (BMP-6)-loaded alginate microspheres in narrow size distribution were produced by optimising electrospraying conditions. The addition of these microspheres to chitosan gels produced a novel scaffold in which not only the pore sizes and interconnectivity were preserved, but also a controlled release vehicle was generated. Loading capacity was adjusted as 50 ng or 100 ng BMP-6 for each scaffold and the controlled release behaviour of BMP-6 from chitosan scaffolds was observed during seven days. Cell culture studies were carried out with rat mesenchymal stem cells derived from bone marrow in three groups; chitosan scaffolds, chitosan scaffolds containing BMP-6-loaded alginate microspheres and chitosan scaffolds with free BMP-6 in culture medium. Results showed that controlled delivery of BMP-6 from alginate microspheres has a significant effect on osteogenic differentiation.

Neural regenerative strategies incorporating biomolecular axon guidance signals

There are currently no acceptable cures for central nervous system injuries, and damage induced large gaps in the peripheral nervous system have been challenging to bridge to restore neural functionality. Innervation by neurons is made possible by the growth cone. This dynamic structure is unique to neurons, and can directly sense physical and chemical activity in its environment, utilizing these cues to propel axons to precisely reach their targets. Guidance can occur through chemoattractive factors such as neurotrophins and netrins, chemorepulsive agents like semaphorins and slits, or contact-mediated molecules such as ephrins and those located in the extracellular matrix. The understanding of biomolecular activity during nervous system development and injury has generated new techniques and tactics for improving and restoring function to the nervous system after injury. This review will focus on the major neuronal guidance molecules and their utility in current tissue engineering and neural regenerative strategies.

Role of engineered nanocarriers for axon regeneration and guidance: current status and future trends

There are approximately 1.5 million people who experience traumatic injuries to the brain and 265,000 who experience traumatic injuries to the spinal cord each year in the United States. Currently, there are few effective treatments for central nervous system (CNS) injuries because the CNS is refractory to axonal regeneration and relatively inaccessible to many pharmacological treatments. Smart, remotely tunable, multifunctional micro- and nanocarriers hold promise for delivering treatments to the CNS and targeting specific neurons to enhance axon regeneration and synaptogenesis. Furthermore, assessing the efficacy of treatments could be enhanced by biocompatible nanovectors designed for imaging in vivo. Recent developments in nanoengineering offer promising alternatives for designing biocompatible micro- and nanovectors, including magnetic nanostructures, carbon nanotubes, and quantum dot-based systems for controlled release of therapeutic and diagnostic agents to targeted CNS cells. This review highlights recent achievements in the development of smart nanostructures to overcome the existing challenges for treating CNS injuries.

Droplet microfluidics

Droplet-based microfluidic systems have been shown to be compatible with many chemical and biological reagents and capable of performing a variety of "digital fluidic" operations that can be rendered programmable and reconfigurable. This platform has dimensional scaling benefits that have enabled controlled and rapid mixing of fluids in the droplet reactors, resulting in decreased reaction times. This, coupled with the precise generation and repeatability of droplet operations, has made the droplet-based microfluidic system a potent high throughput platform for biomedical research and applications. In addition to being used as microreactors ranging from the nano- to femtoliter range; droplet-based systems have also been used to directly synthesize particles and encapsulate many biological entities for biomedicine and biotechnology applications. This review will focus on the various droplet operations, as well as the numerous applications of the system. Due to advantages unique to droplet-based systems, this technology has the potential to provide novel solutions to today's biomedical engineering challenges for advanced diagnostics and therapeutics.

Characterization of an alginate-based drug delivery system for neurological applications

This paper presents a drug delivery system based on alginate gels. The biocompatibility, the flexibility in size and shape, and the ability to entrap biomolecules make alginate-based systems ideal for in vivo drug delivery. Specifically, by considering the target application of neural regeneration and neuroprotection, the issue of biocompatibility as well as morphologic compatibility (e.g. shape and size of an implant) have to be addressed. The authors describe various types of alginate gels; fibers of cylindrical shape resulted the best choice in terms of simplicity of realization, insertion and release effectiveness, as shown by preliminary in vivo assays. Consequently, fibers release is tested in vitro and theoretically modelled, in order to obtain mathematical correlations between the release kinetics and key parameters affecting the realization procedure.

Alginate and chitosan particles as drug delivery system for cell therapy

Drug-carrying microstructures which have a size similar to biological structures are very attractive to encapsulate drugs and protect them during the transit in the human body. This paper describes polymeric (alginate and chitosan) particles (average radius 500 nm) produced by homogenization techniques. In vitro studies performed on cell lines demonstrate the effectiveness of such particles for intracellular drug delivery. Our experiments suggest that cellular up - take increases linearly with particle concentration in the growth medium, and the internalization process has a first order kinetics (characteristic time around 0.5 h(-1)). In addition, the particles degrade within 24 h from the up-take without side effects for cell viability.