A micro-drive hearing aid: a novel non-invasive hearing prosthesis actuator

Concept and Evaluation of a New Piezoelectric Transducer for an Implantable Middle Ear Hearing Device

Implantable middle ear hearing devices (IMEHDs) have been developed as a new technology to overcome the limitations of conventional hearing aids. The piezoelectric cantilever transducers currently used in the IMEHDs have the advantages of low power consumption and ease of fabrication, but generate less high-frequency output. To address this problem, we proposed and designed a new piezoelectric transducer based on a piezoelectric stack for the IMEHD. This new transducer, attached to the incus body with a coupling rod, stimulates the ossicular chain in response to the expansion-and-contraction of its piezoelectric stack. To test its feasibility for hearing loss compensation, a bench testing of the transducer prototype and a temporal bone experiment were conducted, respectively. Bench testing results showed that the new transducer did have a broad frequency bandwidth. Besides, the transducer was found to have a low total harmonic distortion (<0.75%) in all frequencies, and small release time (1 ms). The temporal bone experiment further proved that the transducer has the capability to produce sufficient vibrations to compensate for severe sensorineural hearing loss, especially at high frequencies. This property benefits the treatment of the most common sloping high-frequency sensorineural hearing loss. To produce a 100 dB SPL equivalent sound pressure at 1 kHz, its power consumption is 0.49 mW, which is low enough for the transducer to be utilized in the IMEHD.

Attenuating the ear canal feedback pressure of a laser-driven hearing aid

Microphone placement behind the pinna, which minimizes feedback but also reduces perception of the high-frequency pinna cues needed for sound localization, is one reason why hearing-aid users often complain of poor sound quality and difficulty understanding speech in noisy situations. In this paper, two strategies are investigated for minimizing the feedback pressure (thereby increasing the maximum stable gain, MSG) of a wide-bandwidth light-activated contact hearing aid (CHA) to facilitate microphone placement in the ear canal (EC): (1) changing the location of the drive force and its direction at the umbo, and (2) placing an acoustic damper within the EC to reduce the feedback pressure at the microphone location. The MSG and equivalent pressure output (EPO) are calculated in a 3D finite element model of a human middle ear based on micro computed tomography (micro-CT) images. The model calculations indicate that changing the umbo-force direction can decrease feedback pressure, but at the expense of decreased EPO. However the model shows improvements in MSG without sacrificing EPO when an acoustic damper is placed in the EC. This was verified through benchtop experimentation and in human cadaver temporal bones. The results pave the path towards a wide-bandwidth hearing aid that incorporates an EC-microphone design.