Controlled Preparation of Co3O4@porous-SiO2 Nanocomposites for Fischer–Tropsch Synthesis

CO2 Hydrogenation to Methanol over Mesoporous SiO2-Coated Cu-Based Catalysts

Although chemical promotion led to essential improvements in Cu-based catalysts for CO2 hydrogenation to methanol, surpassing structural limitations such as active phase aggregation under reaction conditions remains challenging. In this report, we improved the textural properties of Cu/In2O3/CeO2 and Cu/In2O3/ZrO2 catalysts by coating the nanoparticles with a mesoporous SiO2 shell. This strategy limited particle size up to 3.5 nm, increasing metal dispersion and widening the metal-metal oxide interface region. Chemometric analysis revealed that these structures could maintain high activity and selectivity in a wide range of reaction conditions, with methanol space-time yields up to 4 times higher than those of the uncoated catalysts.

BaSO4-Epoxy Resin Composite Film for Efficient Daytime Radiative Cooling

Conventional cooling methods are based on active cooling technology by air conditioning, which consumes a large amount of energy and emits greenhouse gases. Radiative cooling is a novel promising passive cooling technology that uses external space as the cooling source and requires no additional energy consumption. Herein, we propose an approach to prepare highly dispersed BaSO4 nanoparticles (NPs) using a direct precipitation method combined with the in situ surface modification technology. The as-prepared PVP-modified BaSO4 NPs with an average size of 20 nm can be stably dispersed in ethanol for more than 6 months and then were used as building blocks to prepare spherical BaSO4 clusters with an average size of 0.9 μm using a scalable spray drying technique. The BaSO4 NPs/clusters (mass ratio 1:1) were used for preparing radiative cooling epoxy resin film, showing a high solar reflectance of 71% and a high sky window emissivity of 0.94. More importantly, this composite film displays superior radiative cooling performance, which can reduce the ambient temperature by 13.5 °C for the indoor test and 7 °C for the outdoor test. Compared with the commercial BaSO4 filled film, our BaSO4-epoxy resin composite film offers advantages not only in radiative cooling but also in mechanical properties with a 16.6% increase of tensile strength and 40.1% increase of elongation at break, demonstrating its great application potential in the field of building air conditioning.

Fabrication of Ir-CoOx@mesoporous SiO2 Nanoreactors for Selective Hydrogenation of Substituted Nitroaromatics

Nanosized Ir catalysts suffer from serious side reactions and poor stability during hydrogenation of substituted nitroaromatics to produce aromatic amines. In this work, core-shell nanostructures with sub-4 nm Ir-CoO_x hybrid cores and mesoporous SiO₂ shells were designed and prepared to overcome these problems. The Ir-CoO_x hybrid cores were converted from IrCo alloy nanoparticles (NPs) inside SiO₂ through in situ calcination and reduction pretreatments. The SiO₂ mesoporous shells in Ir-CoO_x@SiO₂ nanoreactors prevented the agglomeration/sintering of IrCo NPs, while allowing the free reactants and products (big molecules). The synergy between Ir and CoO_x species improved H₂ adsorption, thus affecting the reaction rate as well as the selectivity to aromatic amines. As a result, the obtained Ir-CoO_x@SiO₂ nanocatalyst showed tremendous improvement in catalytic activity, selectivity, and stability.

Potassium promoted core–shell-structured FeK@SiO2-GC catalysts used for Fischer–Tropsch synthesis to olefins without further reduction

The GC and K promoted Fe-based catalysts prepared by modified sol–gel method, which omits the complex and high energy consumption reduction process, can be used directly for highly efficient FTS and thus will be more promising in the future.

A facile synthetic approach for SiO2@Co3O4 core–shell nanorattles with enhanced peroxidase-like activity

SiO₂@Co₃O₄ core–shell nanorattles have been successfully synthesized through a novel self-template route by the calcination of SiO₂@α-Co(OH)₂ at 500 °C and the nanorattles exhibit enhanced peroxidase-like activity.

Tailoring the structure and gas permeation properties of silica membranes via binary metal oxides doping

The incorporation of binary Co–Mn or Co–Cr oxides within the silica matrix leads to the formation of silica structures with different networks, which allows tuning of the gas separation properties.