Green Synthesis of Pd Nanoparticles Supported on Magnetic Graphene Oxide by Origanum vulgare Leaf Plant Extract: Catalytic Activity in the Reduction of Organic Dyes and Suzuki–Miyaura Cross-Coupling Reaction

Fe3O4-lignin@Pd-NPs: A highly active, stable and broad-spectrum nanocomposite for water treatment

In this work, we report an environmentally friendly renewable nanocomposite magnetic lignin-based palladium nanoparticles (Fe3O4-lignin@Pd-NPs) for efficient wastewater treatment by decorating palladium nanoparticles without using any toxic reducing agents on the magnetic lignin abstracted from Poplar. The structure of composite Fe3O4-lignin@Pd-NPs was unambiguously confirmed by XRD, SEM, TEM, EDS, FTIR, and Zeta potential. After systematic evaluation of the use and efficiency of the composite to remove toxic organic dyes in wastewater, some promising results were observed as follows: Fe3O4-lignin@Pd-NPs exhibits highly active and efficient performance in the removal of toxic methylene blue (MB) (up to 99.8 %) wastewater in 2 min at different concentrations of MB and different pH values. Moreover, except for toxic MB, the other organic dyes including Rhodamine B (RhB), Rhodamine 6G (Rh6G), and Methyl Orange (MO) can also be removed efficiently by the composite. Finally, the easily recovered composite Fe3O4-lignin@Pd-NPs exhibits well stability and reusability, and catalytic efficiency is maintained well after ten cycles. In conclusion, the lignin-based magnetism Pd composite exhibits powerful potential practical application in industrial wastewater treatment.

Improvement of salt rejection efficiency of cellulose acetate membrane through modification by poly(amidoamine) dendrimer-functionalized graphene oxide

In this work, the grafting method using graphene oxide (GO) - poly(amidoamine) dendrimer (PAMAM) nanocomposite as filler for the functionalization of cellulose acetate membrane is reported. Here, cellulose acetate membrane incorporated by nanocomposite in the polymer solution was prepared through the phase inversion technique. The effect of embedding GO-PAMAM on the characterization properties and rejection performance was studied. The results of zeta potential, thermogravimetric analysis (TGA), contact angle measurements, Fourier-transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM) established successful modification. Based on the data found, adding the filler improves membrane properties. Loading of 1.00 wt% of GO/PAMAM was found to be the optimized amount of the filler in the membrane processing with the highest porosity (74%), antifouling behavior (88%), reversible fouling ratio (45.71%), and the least contact angle (∼40°). Hence, the rejection and permeability tests of the prepared membrane were examined by Na2SO4 (98.40%), NaCl (52%), and MgCl2 (57%) solutions through a lab dead-end cell. According to the results, the value of salt rejection established more permeability and rejection than neat cellulose acetate membrane.

Efficient Reduction in Methylene Blue Using Palladium Nanoparticles Supported by Melamine-Based Polymer

In this work, palladium nanoparticles, supported by polyaminals (Pd@PAN-NA), were synthesized via a reverse double solvent approach and used as a nano catalyst. The thermogravimetric and the elemental analysis revealed that the catalyst had good dispersity and improved thermal stability. The catalytic activity of the prepared Pd@PAN-NA catalyst was studied for a methylene blue chemical reaction in the presence of NaBH4 as a reducing agent. The effect of the catalyst dose, pH, and dye initial concentration were examined to optimize the chemical reduction conditions. The prepared catalyst Pd@PAN-NA removed 99.8% of methylene blue organic dye, indicating its potential effect for treating waste and contaminated water.

Synthesis and characterization of silver-indium and antimony selenide: role in photocatalytic degradation of dyes

These days, water contamination poses a severe threat to the ecosystem and demands immediate care. This study examined the need to reduce water pollution using clean, renewable energy (solar light irradiations) for the degradation of Congo red by Silver-indium and antimony selenide with chemical composition AgInSbSe₃. The sample was fabricated through a hydrothermal technique. The synthesized sample was characterized through X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Ultraviolet-Visible spectroscopy. The X-ray diffraction confirms crystalline structure of the synthesized sample. The SEM analysis reveals irregular grains and exhibits a very small inter-particle distance. SEM provides the morphology of the synthesized sample, the grain size of the synthesized sample was 0.58 μm. FTIR results revealed specific absorption bands in the range of 400-4000 cm^-1; optical properties are studied through UV-Vis-spectroscopy. The synthesized sample has 1.97 eV bandgap which is suitable for degradation of organic pollutants. The photocatalytic activity of the material is checked by degrading the Congo red dye under direct sunlight irradiation and for the 75 min illumination 77.8% degradation efficiency is attained.

High-Power and High-Performance Catalyst for Suzuki Coupling Reaction

In this project, the aim was to carry out the Suzuki reaction using a new and unique catalyst with a base of Fe3O4 magnetic nanoparticles coated using a new ligand. In fact, this magnetic catalyst has an inhomogeneous surface to create a connection between the organic and aqueous phases so that the carbon–carbon coupling reaction is completely performed on its large surface. The structure of this catalyst uses two metals, nickel and cobalt, which are coated on a bed of amino linkers and propel the Suzuki coupling reaction at high speed on the catalyst surface. The products obtained are from ideal and optimal conditions with an efficiency of over 98%. The catalyst has a recovery power of over 96% and has enough power to perform several coupling reactions several times. Lastly, the magnetic nanocatalyst is easily separated from the reaction medium by an external field and has 100% power when performing other reactions.

Green Synthesis of Pd Nanoparticles for Sustainable and Environmentally Benign Processes

Among transition metal nanoparticles, palladium nanoparticles (PdNPs) are recognized for their high catalytic activity in a wide range of organic transformations that are of academic and industrial importance. The increased interest in environmental issues has led to the development of various green approaches for the preparation of efficient, low-cost and environmentally sustainable Pd-nanocatalysts. Environmentally friendly solvents, non-toxic reducing reagents, biodegradable capping and stabilizing agents and energy-efficient synthetic methods are the main aspects that have been taken into account for the production of Pd nanoparticles in a green approach. This review provides an overview of the fundamental approaches used for the green synthesis of PdNPs and their catalytic application in sustainable processes as cross-coupling reactions and reductions with particular attention afforded to the recovery and reuse of the palladium nanocatalyst, from 2015 to the present.

Recent Advancements in Green Synthesis of Nanoparticles for improvement of bioactivities: a Review

Natural products have widely been used in applications ranging from antibacterial, antiviral, antifungal and various other medicinal applications. Use of these natural products was recognized way before the establishment of basic chemistry behind the disease and the chemistry of plant metabolites. After the establishment of plant chemistry various new horizons evolved, and application of the natural products breached the orthodox limitations. In one such interdisciplinary area, use of plant materials in the synthesis of nano particles (NPs) has exponentially emerged. This advancement has offered various environment friendly methods where hazardous chemicals are completely replaced by natural products in the sophisticated and hectic synthesis processes. This review is an attempt to understand the mechanism of metal nano particles synthesis using plant materials. It includes details on the role of plant's secondary metabolites in the synthesis of nano particles including the mechanism of action. In addition, use of these nano materials has widely been discussed along with the possible mechanism behind their antimicrobial and catalytic action.

Assessing the nanotechnology on the grounds of costs, benefits, and risks

Background

The technical innovations are based on the principles of science with the assurance of outweighing their cost and risk factors with the benefits to society. But sometimes, the innovation either itself becomes a risk or brings in some risk factors along with it. For most of the alleyway of an innovation from its emergence to its road to societal acceptance and adoption, the focus remains on the benefits majorly. Only when we are at the neck of the hour we think about some of the apparent cost and risk issues. The understanding, proper communication, and address of the basics of risk factors are necessarily required much in advance to deal with this issue.

Main body

Nanoparticles with very small size and huge surface area are being derived from various plants, microbes, chemical compounds, metals, and metal alloys. Without our realizations, nanotechnology has become a vital part of our day-to-day life, and nanoparticles are proving their worth in almost every field ranging from food, water, medicine, agriculture, construction, fashion, electronics, and computers to eco-remediation, but what about the costs involved and the risks associated? We strongly need to recognize these concerns and challenges, and it requires collaborative efforts from academicians, researchers, industries, government, and non-government organizations to involve people in dialogs to deal with them.

Conclusion

Through reviewing various studies and articles on nanotechnology, this review has shown that nanotechnology can productively be used to produce consumer goods for pharma, electronics, food, agriculture, aviation, construction, security, and remediation sectors which are advantages in their characteristics. Regarding the future of nanotechnology, we need to focus on assessment and management of risks associated for its promising market growth.

Graphical abstract

Cysteic acid grafted to magnetic graphene oxide as a promising recoverable solid acid catalyst for the synthesis of diverse 4H-chromene

4H-chromenes play a significant role in natural and pharmacological products. Despite continuous advances in the synthesis methodology of these compounds, there is still a lack of a green and efficient method. In this study, we have designed cysteic acid chemically attached to magnetic graphene oxide (MNPs·GO-CysA) as an efficient and reusable solid acid catalyst to synthesize 4H-chromene skeletons via a one-pot three components reaction of an enolizable compound, malononitrile, an aldehyde or isatin, and a mixture of water-ethanol as a green solvent. This new heterogeneous catalyst provides desired products with a good to excellent yield, short time, and mild condition. This procedure presents an environmentally friendly approach for the synthesis of a great number of 4H-chromene derivatives.

Pd-based nanoparticles: Plant-assisted biosynthesis, characterization, mechanism, stability, catalytic and antimicrobial activities

Among various metal nanoparticles, palladium nanoparticles (Pd NPs) are one of the most important and fascinating nanomaterials. An important concern about the preparation of Pd NPs is the formation of toxic by-products, dangerous wastes and harmful pollutants. The best solution to exclude and/or minimize these toxic substances is plant mediated biosynthesis of Pd NPs. Biogenic Pd-based NPs from plant extracts have been identified as valuable nanocatalysts in various catalytic reactions because of their excellent activities and selectivity. They have captured the attention of researchers owing to their economical, sustainable, green and eco-friendly nature. This review attempts to cover the recent progresses in the fabrication, characterization and broad applications of biogenic Pd NPs in environmental and catalytic systems. In addition, the stability of biosynthesized Pd NPs and mechanism of their formation are investigated.

Palladium Nanoparticles Supported on Graphene Oxide as Catalysts for the Synthesis of Diarylketones

Three palladium catalysts supported on graphene oxide (GO) and on its composite with TiO2 (GO-TiO2) were prepared and characterized. The presence of Pd NPs of different diameters (4–89 nm) and size distributions was evidenced by TEM measurements. GO-supported palladium efficiently catalysed the carbonylative coupling of iodobenzenes with aryl boronic acids forming relevant diarylketones at 1 atm CO. The highest activity and recyclability were obtained for Pd/GO-TiO2. The emission behaviour of Pd/GO and Pd/GO-TiO2 catalysts indicated structural changes occurring during the catalytic reaction.

Chemical reduction of methylene blue in the presence of nanocatalysts: a critical review

Methylene blue (MB) (3,7-bis (dimethylamino)-phenothiazin-5-ium chloride) is a harmful pollutant and has been long been known for its detrimental effects on human health. Over the recent years, many strategies including reduction, oxidation, biological and photochemical degradation have been reported for converting this harmful dye into commercially useful products. Among the aforementioned strategies, the nanocatalytic reduction of MB into its reduced counterpart, i.e. leucomethylene blue, is considered more preferable because it has been reported to have numerous applications in various industrial fields in the academic literature. The reduction of MB is the kinetically unfavorable reaction. Henceforth, various nanocatalytic systems utilizing different kinds of stabilization mediums have reportedly been used for speeding up this particular reaction. This article attempts to not only describe the fundamental properties of the reduction reaction of MB but also present the classification of the recently reported nanocatalytic assemblies on the basis of the utilized supporting medium. Various techniques used for the characterization of nanocatalytic systems reported for the reduction of MB have been summarized in this review. The thermodynamics, kinetics and mechanistic studies of this nanocatalytic reaction have also been narrated here. This critical review has been written comprehensively to abridge the recent research progress in the assemblage of nanocatalytic systems used for the reduction of MB and to propose some new ideas for further development in this area.

Benzophenone assisted UV-activated synthesis of unique Pd-nanodendrite embedded reduced graphene oxide nanocomposite: a catalyst for C–C coupling reaction and fuel cell

In this work we report the use of benzophenone (BP) for the synthesis of a palladium (Pd) embedded on reduced graphene oxide (rGO) nanocomposite (Pd/rGO) using a simple aqueous solution and UV irradiation. The simple and facile evolution of thermodynamically unstable branched Pd(0) nanodendrites was achieved by BP photoactivation, circumventing the growth of more stable nanomorphologies. The synthesis of Pd(0)-embedded rGO nanosheets (PRGO-nd) was made possible by the simultaneous reduction of both the GO scaffold and PdCl₂ by introducing BP into the photoactivation reaction. The nanocomposites obtained in the absence of BP were common triangular and twinned Pd(0) structures which were also implanted on the rGO scaffold (PRGO-nt). The disparity in morphologies presumably occurs due to the difference in the kinetics of the reduction of Pd²⁺ to Pd⁰ in the presence and absence of the BP photoinitiator. It was observed that the PRGO-nd was composed of dense arrays of multiple Pd branches around nucleation site which exhibited (111) facet, whereas PRGO-nt showed a mixture of (100) and (111) facets. On comparing the catalytic efficiencies of the as-synthesized nanocatalysts, we observed a superiority in efficiency of the thermodynamically unstable PRGO-nd nanocomposite. This is due to the evolved active facets of the dendritic Pd(0) morphology with its higher surface area, as testified by Brunauer–Emmett–Teller (BET) analysis. Since both PRGO-nd and PRGO-nt contain particles of similar size, the dents and grooves in the structure are the cause of the increase in the effective surface area in the case of nanodendrites. The unique dendritic morphology of the PRGO-nd nanostructures makes them a promising material for superior catalysis, due to their high surface area, and the high density of surface atoms at their edges, corners, and stepped regions. We investigated the efficiency of the as-prepared PRGO-nd catalyst in the Suzuki–Miyaura coupling reaction and showed its proficiency in a 2 h reaction at 60 °C using 2 mol% catalyst containing 0.06 mol% active Pd. Moreover, the electrochemical efficiency for the catalytic hydrogen evolution reaction (HER) was demonstrated, in which PRGO-nd provided a decreased overpotential of 68 mV for a current density of 10 mA cm⁻², a small Tafel slope of 57 mV dec⁻¹ and commendable stability during chronoamperometric testing for 5 h.

Benzophenone photoinitiator aided synthesis of Pd-nanodendrite embedded rGO nanocatalyst possessing superior potential in C–C coupling reaction and fuel cell application.

Prospects of Nanobioremediation in Environmental Cleanup

This century is struggling with the issue of environment friendly management of the pollutants which are contaminating the environment. One of an ecofriendly and economically feasible method is the bioremediation of pollutants using bio nanoparticles. Nanobioremediation is a highly studied and explored area of remediation of contaminants using nanotechnology. Nanoparticles used for bioremediation are biologically synthesized from plant extracts, fungi and bacteria. These biogenic nanoparticles when applied to environmental contaminants had shown very promising results. Based on the various studies the bioremediation of pollutants using biosynthetic nanoparticles is emerging as a very promising and sustainable method of environment cleanup. This review focuses on the synthesis of bio-nanoparticles and their use in cleaning the environment.

Recyclable Pd/CuFe2O4 nanowires: a highly active catalyst for C–C couplings and synthesis of benzofuran derivatives

Pd/CuFe₂O₄ nanowire-catalyzed cross coupling transformations are described. Notably, these reactions showed excellent functional group tolerance. Further, the protocol is applied to a one-pot synthesis of benzofurans via a Sonogashira coupling and intramolecular etherification sequence. The catalyst was reused and found to maintain its activity and stability.

Efficient heterogeneous Pd/CuFe₂O₄ nanowires which catalyze cross coupling transformations are described. The protocol is applied to a one-pot synthesis of benzofurans via Sonogashira coupling and an intramolecular etherification sequence.